hi,
just wanted to know if it is possible to flash CWM on "CSC - S5830SERKPE"?
thx
no, cwm isnt available yet for the sga.
Related
Hello
I just wanted to make a CWM recovery for my phone (Xperia SOLA) with stock kernel build .54 which is not available,
I know how to open kernel and make it again, I just don't know which file should I add, replace or change!
It would be really good to tell me which file should I bring from last CWM recovery (which was for build .10).
thanks in advance
Hello!
I could really need help for updating my recovery mode i don´t get at there is to much information to find the right one i need.
My problem is and some information:
I´m running pac rom i9100-nightly-2013 10 05 at the moment and recovery mode is since a few weeks for a reason i don´t know(had philz touch before):
CWM-based Recovery v6.0.4.0
But i want Philz Touch back and i don´t want to choose something wrong and brick the phone so i really need your help
Don´t get it which version i can install because of kernel and all that stuff....
Thank you all for your time and helping someone who is lost in information...
Philz kernel/recovery is for stock firmware only.
but..
But i had a recovery with touch control and filemanager a few weeks ago? is it possible that it was included in slimrom i was using before pac rom?
thx
Only rom I've seen it on is neat rom. If you want cwm touch then flash Apollo aokp/cm kernel with modded Philz custom recovery built in. Take care with Apollo as he has both stock and custom kernel now and also twrp and cwm version of the kernels :thumbup:
Hi i have a question i read here in forums that before you flash a kitkat rom you need first cwm version is 6.0.4.7 higher i have philz touch 5 and my cwm version is 6.0.3.2 how can i update my cwm to 6.0.4.7 im sorry im newbie tia and godbless
If you want to flash KitKat, then I suggest you just follow the guide on cyanogenmod.org. In the howto, they provide you with the download link for the correct custom recovery and also how to apply it to your phone. I also had an old CWM version before and so the installation of CM11 failed. After I flashed the one from the guide, it just worked!
Here's the link:
h**p://wiki.cyanogenmod.org/w/Install_CM_for_i9100 (sorry, I'm not allowed yet to post links!)
IMPORTANT NOTICE: I don't know if a different kernel (like the PhilZ touch) also removes the superbrick bug. So maybe you shouldn't do a factory reset after putting the new CWM. I did it with mine, it didn't brick. Maybe I was lucky (had a rootet phone before, don't remember though which kernel).
Hi All,
Sorry if the same question is being asked over and over again, but I am not able to find correct solution for my problem.
Well, the basic problem is status -7 error. but I want to know if I am using the correct version of CWM, ROM etc.
My Mobile model: GT I9300(Indian model- GSM)
Android version-4.3
baseband versionI9300DDUGNB1
Kernel - 3.0.31-2363855
Build # JSS15J.I9300XWUGML4
ClockworkMod recovery v6.0.3.2
ROM Manager Version 5.5.3.7
CMW Manger v3.55
Roms I tried to install are cm-11-20140918-NIGHTLY-i9300.zip and Paranoid Android downloaded from the below links respectilvey:
http://forum.xda-developers.com/galaxy-s3/orig-development/rom-cyanogenmod-9-nightly-builds-t1714354
and http://forum.xda-developers.com/galaxy-s3/orig-development/aospaandroid-4-4-2-kvt49l-t1745003.
With the help of Root checker i can say that the Root is granted properly.
Is my recovery version good? Coz, i have used a prior version( 3.xx) and it was working fine(though it was showing status 7 error), ie., for backup and restore, but in the version6.0.3.2, even taking a backup isn't properly done.
also, are the ROMS am using correct for my S3?
Please help me install new ROM.
TIA.
Agnel said:
Hi All,
Sorry if the same question is being asked over and over again, but I am not able to find correct solution for my problem.
Well, the basic problem is status -7 error. but I want to know if I am using the correct version of CWM, ROM etc.
My Mobile model: GT I9300(Indian model- GSM)
Android version-4.3
baseband versionI9300DDUGNB1
Kernel - 3.0.31-2363855
Build # JSS15J.I9300XWUGML4
ClockworkMod recovery v6.0.3.2
ROM Manager Version 5.5.3.7
CMW Manger v3.55
Roms I tried to install are cm-11-20140918-NIGHTLY-i9300.zip and Paranoid Android downloaded from the below links respectilvey:
http://forum.xda-developers.com/galaxy-s3/orig-development/rom-cyanogenmod-9-nightly-builds-t1714354
and http://forum.xda-developers.com/galaxy-s3/orig-development/aospaandroid-4-4-2-kvt49l-t1745003.
With the help of Root checker i can say that the Root is granted properly.
Is my recovery version good? Coz, i have used a prior version( 3.xx) and it was working fine(though it was showing status 7 error), ie., for backup and restore, but in the version6.0.3.2, even taking a backup isn't properly done.
also, are the ROMS am using correct for my S3?
Please help me install new ROM.
TIA.
Click to expand...
Click to collapse
You will need this CM11 version, better Snapshot than Nightly: https://download.cyanogenmod.org/?device=i9300
Than you will also need the latest recovery, I prefer Philz Touch Recovery: http://goo.im/devs/philz_touch/CWM_Advanced_Edition/i9300/philz_touch_6.48.4-i9300.tar.md5 (flash it in odin)
Last I would recommand a Googy-Max Kernel like this one here: http://goo.im/devs/philz_touch/CWM_Advanced_Edition/i9300/philz_touch_6.48.4-i9300.tar.md5
Agnel said:
Hi All,
Sorry if the same question is being asked over and over again, but I am not able to find correct solution for my problem.
Well, the basic problem is status -7 error. but I want to know if I am using the correct version of CWM, ROM etc.
My Mobile model: GT I9300(Indian model- GSM)
Android version-4.3
baseband versionI9300DDUGNB1
Kernel - 3.0.31-2363855
Build # JSS15J.I9300XWUGML4
ClockworkMod recovery v6.0.3.2
ROM Manager Version 5.5.3.7
CMW Manger v3.55
Roms I tried to install are cm-11-20140918-NIGHTLY-i9300.zip and Paranoid Android downloaded from the below links respectilvey:
http://forum.xda-developers.com/galaxy-s3/orig-development/rom-cyanogenmod-9-nightly-builds-t1714354
and http://forum.xda-developers.com/galaxy-s3/orig-development/aospaandroid-4-4-2-kvt49l-t1745003.
With the help of Root checker i can say that the Root is granted properly.
Is my recovery version good? Coz, i have used a prior version( 3.xx) and it was working fine(though it was showing status 7 error), ie., for backup and restore, but in the version6.0.3.2, even taking a backup isn't properly done.
also, are the ROMS am using correct for my S3?
Please help me install new ROM.
TIA.
Click to expand...
Click to collapse
Error 7 means your recovery is to old to flash kitkat roms
Your recovery needs to be updated to install any kitkat roms.
Darke5tShad0w said:
Error 7 means your recovery is to old to flash kitkat roms
Your recovery needs to be updated to install any kitkat roms.
Click to expand...
Click to collapse
Can you please point me to the latest recovery. Coz i tried too many and still the same error.
TIA
Look for philz in development.
Hi everyone, I have a problem with my Lg L9 II, it's the the stock rom but updated on 4.4.2 (KitKat).I have some bugs on my phone and it's a bit slower.I want to the install my original rom 4.1.2, I dowloaded him from your forum but when I transfer on SD Card and open CWM with the button volume up and power key I get the block ( I take picture and she is in attachment). I don't have a root. Can anyone explain me how to fix that, that I can install my original rom with CWM or TWRP. I hope so that You can help me, and sorry if the that thread is duplicate, I'm new here and don't know how it's work. Thanx in advice.
Kind Regards
did you had CWM installed!?
if you want "original" ROM (from LG), install the 4.4.2_V20g version via KDZ install (20g is the best version in my experience).
if you want cwm or twrp to experiment custom roms.... a good start: http://forum.xda-developers.com/showthread.php?t=2730501
Cisf said:
did you had CWM installed!?
if you want "original" ROM (from LG), install the 4.4.2_V20g version via KDZ install (20g is the best version in my experience).
if you want cwm or twrp to experiment custom roms.... a good start: http://forum.xda-developers.com/showthread.php?t=2730501
Click to expand...
Click to collapse
I don't have CWM Instaled, When I want get inside CWM I have message from picture in attachment. Now I have instaled that version 4.4.2 v20g but it's not good in my case,I want to restore my original softwear 4.1.2. but I don't know how to do that.
alen922008 said:
I don't have CWM Instaled, When I want get inside CWM I have message from picture in attachment. Now I have instaled that version 4.4.2 v20g but it's not good in my case,I want to restore my original softwear 4.1.2. but I don't know how to do that.
Click to expand...
Click to collapse
You need to flash the respective V10x kdz(according to your region). V20 is KitKat. V10 is JellyBean.