just got a Samsung bluetooth WEP450 headset, and for some reason i cant just press the button and use voice command while the phone is lock. But when its unlocked works as it should. I had an older headset i replaced, it did it no problem. Anyone seen this or know a trick or setting?
Related
Hi, who has problems with his Bluetooth headset after the WM6 upgrade?
My Bluetooth headset used to start looking (by beeping) for the last connected device when I power it on. It doesn't do that while paired with my X7500 WM6. It does start looking MANUALLY when I press the call button on the headset and when it's connected (you see the headphones icon in the phone screen appear), it only stays that way for a few seconds. The headphones will disappear again and the connection has been lost.
When I then push the headset call button again, it starts looking again, connects again, and then disconnects again after a few seconds.
I first thought it was the headset, but it works just fine on all other devices I have, but just not the X7500 anymore. I'm sure it has something to do with the WM6 upgrade, because it was working the proper way while running WM5.
Any tips or suggestions??
The icon disapears, but calls still go through to it when they come in for me.
Have you checked to make sure it doesnt actualy work when an incoming call arrives? the icon is misleading.
No, the connection is lost when the icon has been disappeared, because the headset will start reconnecting/looking for the device when I press the headset call button.
If it was still connected it should initiate the voice speed dial.
strange, i have many headsets and dont have that problem with any.
I do have it randomly stop talking to the headset at all, and require a delete/repair, (one headset still wont connect, but i think its a crap headset issue). but when paired, they normaly behave afterwards.
Im on wm6 btw.
BUMP. This has been happening for me since my WM6 upgrade.
HBH-PV720
AMEO with HTC WM6
Please can anyone can help with this ?
DiGRem
Delete and pair
I have had issues with several Nokia phones when upgrading firmware. The other bluetooth units, previously paired with the phone, still thinks that they should be paired after the upgrade. Only issue is that the phone has totaly forgotten of all paired devices. This resulted in many connection errors, when the peripherals wanted to connect, but the phone refused. Can you somehow reset the headset? Delete the pairing on the phone, pair the headset with another phone/pc, and then, re-pair it with the athena again. Just to make sure that it has no old pairing info.
-Johan
Short press the MFR button (Multi Function Button with the Motorola Logo), speak name, and the phone will dial the call
did it work for any one ?
Wireless Stereo and Hands Free are both enabled . is ther any other requirement ?
it doesnt have a microphone so no, although it can activate calls on the phone.
what i used to do was pick the call up and talk into the phone, i just got the Nokia BH-501 headset which has a built in mic but i miss my extra hang up and connect call buttons from the HT820.
i can use it as a handsfree headset and can answer incoming calls , so it does have a mic
Its juz that i cant give voice command over bluetooth 4 some reason
yeah i know i noticed that as well except i dont think its the headset that does that just the phone that sees the command and puts the voice recon app into action.
the HT820's are good but not mic good.
Please help i have searched high and low, and all around the internet
i have a tmobile wing flashed with ASerg.12.WM61E.WWE
And my hands free headset is a motorola H500
I can get the phone and the headset to pair but i cant the headset to work.
If i press the button on the headset i get nothing
and if i call somebody via the phone and press menu, i dont even get the option to send to hands free. but the devices are paired according to the bluetooth manager.
any help would be appreciated
try connecting using HTC btquicklink
that actually works for me when the usual way does not.
maybe someone else have problem with the bluetooth plantronics savor m1100 and phone. While the pairing is on and the connection between phone and headset is ok in almost every phone call I lose the sound (not the pairing) between them.
The solution is to press the button of the headset off and on again and my sound come back to the headset.
There are someone have the same problem? I am running omega V40 with stock kernel.
I thought this was fixed in JB, but I guess not.
I've got my GS4 paired with both the car and my Jawbra headset. All works fine in either scenario, but occasionally I'm on a call using my car BT and want to switch to my headset, or visa verse. Isn't there a way to just click a button/option in phone and switch the device? Anyone found an App for that (I've been searching for hours).
I'm hoping that I'm just missing something, but I've been trying to Google and search these forums to no avail.
I can't try it but what can't you just press the headset button in the midcall menu?
SmokeyMon said:
I can't try it but what can't you just press the headset button in the midcall menu?
Click to expand...
Click to collapse
That sounds like a great idea, I would love it if it worked that way. But the phone get's itself "paired and connected" to the car, and it is not connected to the Jawbone. The only thing I found to change it during the call is to turn off bluetooth, which forces a pickup on the handset. I suppoose I could try to turn BT back on, and get it to connect to the Jawbone, but that's no practical while driving and trying to pay attention to a phone conversation.
A simple pop-up with "connect to Jawbone" or "connect to car" would be nice during the call.
If you just want to you your headset to take calls and your car bt for audio, try deselecting "phone" in your bt device options on the phone.
Also I think this issue is more with the Samsung phone then with Android. My Nexus 4 was able to do just this and also allow me to take calls on my bt headset while my phone was plugged into the aux jack in my car.