I am going mad -
before upgrading to WM2003 SE - my bluetrek G2 worked fantastically.
NOW
it sets it up as handsfree device - I hear people through the headset but people only hear me through the mike on the XDA - the bluetrek microphone seems to be "disabled" in handsfree mode.
ANY ideas how to enable the microphone on the bluetek headset so it is in HEADSET mode and not through the microphone input on the XDA ?
I have been looking for an aswer to same problem. Hopefully we can find something together. :idea:
Problem solved
When I upgraded to 2003 SE I had three main problems and spent hours trying to solve them:
1) Bluetooth handsfree automatically kicked in - when I needed headset mode - rendered my bluetrek headset useless.
2) e-mail attachments - enormous problems downloading and sending attachments
3) alarm clock - not ringing
I have solved all 3 problems by reinstalling the 2003 se rom using the rom of 2.06 instead of the "merged" rom which was causing me the above three problems - when upgrading be careful and beware of country code errors - I am no expert but I used the rom upgrade of Hery and reupgraded and am happy with the result. Every time upgrading is a dangerous excersise and if you like me just want a machine that works and not really technically minded - beware of upgrading. I was able to but was nervous the whole way through. They say version 2.06 hangs but its been OK for me. I do not have wizcom on my machine but the only bluetooth I use is the headset and for GPS which work with the microsoft bluetooth protocol.
Good luck
hi folks,
i have the following problem with ANY handsfree-sets:
pairing the phone: works.
sync of adressbook: works.
dial or take over a call: works.
i hear the caller clearly, --but no one hears me-- ?!?
looks like ANY kind of bloetooth mic does'nt work
what i have tried so far:
updated the Parrot CK3100 in my car to the last firmware. (V 4.23)
tried in my wifes BMW with OEM car-kit.
tried an old Logitech bluetooth head set
tried in an VW (don't know if it was OEM or aftermrket)
on the phone:
a LOT of soft- and hardresets.
tried a ROM from HTC-webpage.
as my phone was O2 branded, installed a new ROM from O2 webpage V 1.57.207.1 (GER)
..but it's always the same: i hear the caller, but no one can hear me ...
any ideas ?
I was wondering if anyone could help with this problem. My SGS II connects with my in built (Ford) car system, its does everything it should apart from that it can not display the call list (in or out). This was also the problem on my SGS on stock roms until I installed CM7 and then the call lists showed up perfectly. Is it the case that Samsung roms are putting the call logs in a different place that cannot be seen by the car system, if so would it be easy to change this or do I have to wait until a CM rom is made for the SGS II.
SGS II as well as SGS has a very gig problems with BT in car on stock ROM. I had SGS before and there was a problems BT constantly drops in AUDI car system. Temporarily it was solved by BT Fix from the market but finaly solved only coming to a custom ROM (all of them solving that). Now Having SGS II It is total disaster in AUDI - first it constantly drops BT connection and even more - if I'm talking by phone during being connecting to BT, connection failed BUT after call finished phone crushed down and it takes 10 second pushing power button to get it back :-( And then in phone all pairings went out! So - do anybody know this case? And waiting for the custom ROM.
I have a Mercedes E-class (new type). No problems at all with the BT. Very quick to connect, and I can control track fw/bw from the steering wheel. No drops. Works with the default music player as well as Spotify. Phonebook transfere is quick.
In terms of functions I also have no any problems but drops and crashes :-(
Ford focus audio bluetooth
Hello,
I have the same issue with the Ford Focus Bluetooth. It plays ans stops all the time. hands-free works great. Did you solve it?
Hello everybody.
the same issue with new Volvo S60. Previously car kit perfectly worked with Nokia E71... As for S2 - I was able to pair the phone and car. But afterwards, connection could be reestablished only if it's initiated from the phone side (I select "My Car" in bluetooth menu of the phone). Without such actions the car is unable to find the device...
Problem was solved for me when last modem was released. Use ROM with XKE2 modem.
Hi all,
Yesterday I have tested SGS2 (LiteROM 1.5) in my BMW E92 LCI and it works really fine so far.
(call, sms, phone adressbook and bluetooth audio streaming).
BMW offers the possibility to connect two phones at the same time.
I successfully connected my nokia business phone for bluetooth call & SGS2 for bluetooth audio streaming only.
SGS2 is the first mobile that I have connected to my car not only displaying title/artist information properly using the default music player,
but also offers good mp3 sound quality over A2DP.
Strange enough, when I use a different music player (e.g. PowerAMP) the title/artist information is not working any longer. Any ideas?
Cheers, Spad
Problem with transmission over car bluetooth
Hi there,
I have a galaxy s2 that used to connect (with no problems) with my alpine CDE-126BT
After I messed around with the service mode for a while trying to crank up the volumes, there is no transmitted voice over the call (the other side can not here me when I'm connected to the car's Bluetooth).
I know that if I reboot the phone all the changes that was done in the service mode would reset to the default settings, it seems to revert back default but I still have the same problem.
Any advice??
Thanks,
David.
HI Wizards
I must inform you for the following
I have installed the latest I9100G nightly - cm-9-20120730-NIGHTLY-i9100g.zip
2 problems are repeat themselves all releases
1. In PC - 'Device Manager' can't recognize device's Bluetooth properly - it says that drives cannot be found (a specific one)
2. In Car - I have a Bluetooth Speaker installed in my car. (Nokia CK-100, if required)
When I make an outgoing call everything works properly both sides are speaking and hearing each other
BUT
When I receive an incoming call device isn't recognize as BT connectivity and I can NOT hear or speak via car's microphone. I must use it as handset.
It is a known issue - I saw much of CM9 for I9100G users that complained this problems
Are there any suggestions to fix it??? Does someone know the source of this problems??????
Police might be caught me speaking without BT speaker and then I will get a report....
Trust'n you... tnx
When receive or dial out, my Nokia BH-102 mono bluetooth v2 works for CM9/CM10, but not Jabra Easycall v3 bluetooth. However music streaming works for Jabra mono headset.
Hey all,
Need some help with this, getting quite frustrated:
I have an international S III (i9300) and whatever rom I use I have the exact same problem that seems to be related to bluetooth.
- First use it connects to my caraudio (pioneer deh-4400bt) and it works great, good sound etc.
- Than I start Sygic (navigation) on the Phone, which I set in the "Always use internal speaker mode", so it doesnt use BT
Now two things happen:
- In sygic the sound through the internal speaker is very soft
- When I try calling with the carkit it does connect and make the call, but I hear a terrible garbled sound and i don't hear the other side
When I turn off bluetooth and than start Sygic... sound is perfectly loud
I have tried several roms, lastly thinking the issue might be solved with 4.2.2 but still the same
Is bluetooth hardware or software, and, when software, is it kernel or modem related?
Anybody know what causes this problem and how to solve it?