Dell Streak no signal after up rom - Streak 5 Q&A, Help & Troubleshooting

Please help me!
Dell Streak no signal after up rom.
I tried to recover by I tried to recover by QDLTool3rd_20101022_GAUSB1A130500,but but still be so.
Please help me!

The funny thing is I still have signel bars that apear to work and when i go to
Setings>wireless & networks>mobile networks>network operators.
I can scan and picks up my local mobile network carriers,
When I choose VNM and Viettel who ive got my contract with it says:
Registering on VNM and Viettel Network
then:
Unable to connect to this network at this time. Please try later

Are you sure the ROM you flashed is compatible with the region settings of your network carrier?
You may have to flash an update.pkg that is compatible with your area. Don't know where you are so can't tell you which one.

I use a AT & T and was unlocked.
before the machine I normally use. But after my ROM (I do not remember exactly what ROM version), the wave may not even have inserted the SIM.
When I was up another faulty ROM as follows:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Some body helf me????????????????

Did you try redownloading the rom and replace the one on your SDCard?
Link to download the stock official rom - http://forum.xda-developers.com/wiki/index.php?title=Dell_Streak#Official

duongthanhcong said:
Some body helf me????????????????
Click to expand...
Click to collapse
Did you see this multiflasher tool. I used it yesterday in my quest to bring my streak back from the dead.
http://forum.xda-developers.com/showthread.php?t=1000455
Also you should take a look at the Bricked Streak thread in this section.
I actually used the QDL tool to free my Streak from a continuous restart and then used the multiflasher to install one of the stock roms. My phone is now using 351. I think I need to root it, but it's working as advertised.

I have followed all instructions as people. But it had no signal

I think I have a few interesting people when I press * # * # 307 # * # *

up.........................................................

You probably aren't using the right recovery.
Sent from my Inspire 4g using XDA Premium App

use the multi flasher tool in the dev section to flash the 318 recovery then flash to which ever pkg u want

If you are going to install a stock ROM from recovery as an update.pkg file you should flash the recovery that matches the ROM you want to install. When you reboot you must not let the phone restart normally because the recovery will be overwritten if it not the one matching the current ROM installed, you have to go right into recovery mode and then apply the update.pkg that matches the recovery.

i do have same problem with his phone with no signal but i can make an emergency call (112)... i already tried flashing recovery and baseband with version 309 and 318... but everytime i update with stock rom 309 and 318 it always got an error just same with his phone..
any best way to resolve the no network problem?
thanks..

same with me...del steak 5...i did flash but still no signal..no service issue...
any updates..plz share

Related

[Q] ROM level needed for internet video

I tried to search this but the search function won't work for me.
My phone is brand new U.S. model with 1.6 installed.
I was connected to the web via my home wireless.
I can't watch videos on the web. Do I need to upgrade? If so, to what level?
Is there a setting I can change?
Also, there were popups galore. How do you select individual browser windows to close when this happens? I could only do all of them.
I think you need at least Android 2.1 to run flash. Try Skyfire for a browser, it will probably work a lot better than the stock browser on 1.6, but really you should be able to just download the US update to get to 2.2 which would be a lot better than what you have now.
The phone says it is up to date.
When I go to check for updates, the phone claims there are none. Do I have to cheat and risk the warranty to get updated?
mid_life_crisis said:
When I go to check for updates, the phone claims there are none. Do I have to cheat and risk the warranty to get updated?
Click to expand...
Click to collapse
You can get an official Dell upgrade package from this page.
You can visit this link
http://mobileupdate.dell.com/PackageProductionLocations/Streak_318_12821_00.pkg
or scan this barcode (it's for the link above)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
from your phone to DL the update direct to your phone. If you tap on the notification for the DL after it completes it should install. If it does not
rename it update.pkg and put it in the root of your SD Card
Boot into recovery mode by powering off, then powering on while holding BOTH volume buttons
Select option 2 from the recovery menu to install the update
This will be the same as a factory reset and you will have to install your apps and set up your phone again.
That build is for unlocked Streaks. If you want to install the latest official build for your carrier you can probably get it from this page.
AT&T locked
Thank you very much.
So if I have a locked AT&T phone, I have three options, if I understand this correctly.
1) Leave it alone and live without Flash capability.
2) Update to whatever is on the last link.
3) Use the non-official update I've seen on this forum. Has the latest one (1.9 I think) been out long enough to be determined if it is stable?
Thanks again for the patience and help.
Okay, so the link on the Wiki page for a non-unlocked AT&T phone downloads a .mbn file. The other one was a .pkg and if I could use it, I would put it on my SD card. What do I do with the .mbn file to use it to update the Streak? I'm sure there is a thread for using that type of file, so if ysomebody could point me to it, I'll go from there. Preferably a thread that assumes minimal base knowledge level beyond generally using the phone.

Help to de_brick X10v3

For some reason my last 2 posts have been closed
http://forum.xda-developers.com/showthread.php?t=1233502
Attempted 2.3.3 with 0.71 baseband, phone just goes in continuous boot_loop. Ive tried almost every available baseband with no results.
Here is what I have attempted so far:
1. Flash tool and forum instructions:
a) Device will take any 1.6 (branded or unbranded) firmware but wont allow to use any features of interface other then emergency calling
b) 2.1 firmware with different revisions/baselines have been attempted as well but device just wont boot at all.
c) after flashing with 2.3 firmware device goes in to constant boot_loop.
2. SEUS couldn't locate the new software as my phone has latest software available from the server. (however I'm still on 1.6 )
3. Same with SE Companion, it comes up with the message that software is not available for my phone yet.
brutus* said:
For some reason my last 2 posts have been closed
http://forum.xda-developers.com/showthread.php?t=1233502
Attempted 2.3.3 with 0.71 baseband, phone just goes in continuous boot_loop. Ive tried almost every available baseband with no results.
Here is what I have attempted so far:
1. Flash tool and forum instructions:
a) Device will take any 1.6 (branded or unbranded) firmware but wont allow to use any features of interface other then emergency calling
b) 2.1 firmware with different revisions/baselines have been attempted as well but device just wont boot at all.
c) after flashing with 2.3 firmware device goes in to constant boot_loop.
2. SEUS couldn't locate the new software as my phone has latest software available from the server. (however I'm still on 1.6 )
3. Same with SE Companion, it comes up with the message that software is not available for my phone yet.
Click to expand...
Click to collapse
U probelly doing something wrong
can you elaborate on this?
Hey take ur phone in flash mode after u see this screen in flash tool...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
hey sahibunlimited:
I'm not new_be to the flash process, did you read my initial post? Specifically->( Device will take any 1.6 (branded or unbranded) firmware but wont allow to use any features of interface other then emergency calling) I think this has to be resolved first before proceeding any farther....
Thanks
Folk, anyone? I need your help desperately....
Folks* sorry - TYPO

[Q] Boot failure

Hello,
I have a big probleme ! I tryed to instal a rom with recovery but, the installation failed and the screen is stuck on the motorola logo
I tryed to installing fastboot file EU (GSM) with RSD lite but after flashing I have this at boot :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I tryed several time to reinstal fastboot file but it's the same problem.
Thanks to your help
I use GSM EU Razr.
Hi,
i`ll send you an PN with a boot image to flash. (can`t post links cause i`m an new member)
After this your system should boot normally.
Wiplex said:
Hi,
i`ll send you an PN with a boot image to flash. (can`t post links cause i`m an new member)
After this your system should boot normally.
Click to expand...
Click to collapse
Can you help me out too? I'm exactly in the same poopoo as Eagledig. Thanks in advance!
Could i be that i can`t send PN`s an a new member?
Hm try this, simply flash it via RSD:
mediafire.com/?kovmm4bv4l4ge5v
Wiplex said:
Could i be that i can`t send PN`s an a new member?
Hm try this, simply flash it via RSD:
mediafire.com/?kovmm4bv4l4ge5v
Click to expand...
Click to collapse
Can I flash this file on whichever rom I'm on?
UH Oh battery low... Try this http://forum.xda-developers.com/showthread.php?t=1403100
Make sure you have the correct ROM for you phone. I had this issue kinda, was stuck at the screen, with less errors though. Perhaps the link below will help, it is my experience that RSD lite can be trying to install the correct ROM but still giving errors for some reason and a more manual approach is needed... for some reason.
http://forum.xda-developers.com/showthread.php?t=1453660
I did not use this method, but just used fastboot to flash the individual partitions located in the ".xml" file in the FSB ROM file. Which is basically what the script in the link above does for you.
I have the same problem
What should i do?
I got only the ap fast boot failure
drolgnir said:
UH Oh battery low... Try this http://forum.xda-developers.com/showthread.php?t=1403100
Make sure you have the correct ROM for you phone. I had this issue kinda, was stuck at the screen, with less errors though. Perhaps the link below will help, it is my experience that RSD lite can be trying to install the correct ROM but still giving errors for some reason and a more manual approach is needed... for some reason.
http://forum.xda-developers.com/showthread.php?t=1453660
I did not use this method, but just used fastboot to flash the individual partitions located in the ".xml" file in the FSB ROM file. Which is basically what the script in the link above does for you.
Click to expand...
Click to collapse
Yes..................................definitely get the battery charged and try different ROM. MattGroff's utility 1.7 worked for me to upgrade my rooted GB to ICS.
What is your original rom? Did you install the motorola drivers?
Sent from my XT910 using xda premium

[Q] I9305T Stuck on Downloading Screen, Please help

I tried to root my S3 L9305T following instructions from here:
redmondpieDOTcom/root-galaxy-s3-on-android-4.1.2-how-to-tutorial
However, now Odin says "PASS!" and my device is stuck on the "Downloading... Do not turn off target!!" screen. There is no odin writing or anything in the top left like when you enter download mode.
I live in Australia and my provider is Vodafone
Please help, i really need to fix this as soon as possible :crying:
i think u used wrong files
head over to sammobile download stock rom and flashed with odin
This is not I9305 Q&A.
Root please read the sticky faqs and guides or ask those who supplied your root file .
Can you download a recovery .tar and then transfer a ROM to your phone and flash it ?
Andr3y29 said:
Can you download a recovery .tar and then transfer a ROM to your phone and flash it ?
Click to expand...
Click to collapse
Sorry, i have no idea how to do that. I'm in this situation because i jumped into things without knowing enough.
I'm trying to download a stock rom from sammobile, however i wont be able to connect to my carrier will i? They only have a Telstra rom and I'm with Vodafone
kaitur8 said:
Sorry, i have no idea how to do that. I'm in this situation because i jumped into things without knowing enough.
I'm trying to download a stock rom from sammobile, however i wont be able to connect to my carrier will i? They only have a Telstra rom and I'm with Vodafone
Click to expand...
Click to collapse
Download this: http://techerrata.com/file/twrp2/i9305T/openrecovery-twrp-2.6.3.0-i9305T.tar . Open Odin, connect the p[hone in "Download mode" , click Pd, and choose this file. then click start. because you have no OS, I think it will boot straight to TWRP. If not, open yourself by holding Volume UP+Power+Home at the same time. And about the arrier, I don't think it will be a problem. Just in case your phone brakesa nd you want to take to a service, it may detect that you changed the software(Even if it is an original one from SamMobile). But this cases are very rare. Except that, you will be able to use your phone normally just as you did until now !
You have I9305T ???
This is I9300 forum not for your phone please do not flash I9300 firmware .
There are two non Telstra roms listed on sammobile for GT-I9305T
GT-I9305T Australia 2013 February
I9305TDVBMB1 I9305TXSABMB2
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
GT-I9305T Australia 2013 January 4.1.2 I9305TDVBMA2 I9305TXSABMA4

my mega not booting

guys i tryed to root my device first i used a local turkish site and succesfully installed recovert but it didnt installed supersu. it said veritifaction failed or something like that idk.
then i saw this on here
http://forum.xda-developers.com/showthread.php?t=2355680
well it says supersu comes with it so i tryed to flash this. now my device not booting but i can reach download mode.
what i must do?
here is what happened:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
well it was a quick shot from my note 4 but still explains the problem. phone stays like this with blue led flashing after i heard samsung boot sound. i tryed to flash old recovert first i used but it also didnt worked.
update: i cant reach recovery...
First try to take out battery for some time and try to boot again. If not successfully what about download mode? If you can't boot and can't go to recovery your only option is to flash stock ROM by Odin using download mode. Then you can flash recovery and restore your backup (if you have one).
trurl3 said:
First try to take out battery for some time and try to boot again. If not successfully what about download mode? If you can't boot and can't go to recovery your only option is to flash stock ROM by Odin using download mode. Then you can flash recovery and restore your backup (if you have one).
Click to expand...
Click to collapse
well i already tryed battery trick. i found stock rom (1.3gb from internet) downloading now. if i flash that will it fix it?
and no i dont have a backup
Be absolutly sure so downloaded ROM is suitable for your model - one of trusted sources of stock ROMs for Samsung phones is there: http://www.sammobile.com/firmwares/
If you choose proper ROM, after flashing it you will get brand new system on your Mega - flashing ROM by Odin superseed all what you have now in your unit. Of course all your data will be lost.
trurl3 said:
Be absolutly sure so downloaded ROM is suitable for your model - one of trusted sources of stock ROMs for Samsung phones is there: http://www.sammobile.com/firmwares/
If you choose proper ROM, after flashing it you will get brand new system on your Mega - flashing ROM by Odin superseed all what you have now in your unit. Of course all your data will be lost.
Click to expand...
Click to collapse
thx for help dude i fixed it.
there is 3 different model in turkey i found the correct one.
but i was scared when first one didnt worked

Categories

Resources