Ok. My HTC Hero is ****ed
basicly it doesn't start its stuck on booting and it cant go into the clockwork mod recovery image either someone help me?
Does it load into fastboot? (back key and power). If yes, try installing official RUU.
I guess this thread will help.
HI,
Once I got my phone rooted through revolutionary tool, I installed the Clockworkmod rom manager, but when selecting the device there wasn't EVO3d GSM, just EVO3d. I selected it and after it installed it it got briked.
I can enter the menu through volume down and power button but factory reset, wipe and all I tried didn't repaired my device that right now stays in the HTC boot screen.
Please help!
Thank you
just install any rom that are available from this forum that are for gsm evo 3d. i was stuck on the same place as you, but it was fixed after i installed other roms from recovery.
Thank you, I've installed High ROM and my phone is working again.
Which ROM did you installed? is it possible to flash the original ROM from HTC? Clockworkmod recovery tool is useless until they add an evo3d GSM option, right?
Thank you again!
I have a Evo 3d, hboot 1.50 latest radios, prl, pri. I had OMJ's latest Rom, and used Flash Image Gui to flash a custom Kernel package; I flashed Tiamuts "Tiamat_E3D-v1.1.0-Sense" http://downloads.tiamat-dev.com/8x60/110/Tiamat_E3D-v1.1.0-Sense.zip, and rebooted, then my phone was locked up on just the HTC screen.
I can still access the Bootloader, and Fastboot, and Recovery. I tried rolling back to my nandroid backup, and also reflashing the stock kernel through recovery (as the Rom won't ully load), and now all I get is a black screen after the HTC logo, and the phone is responsive to power and capacitive buttons, but no display at all.
Tried full wipe, and reflash of OMJ, even CleanRom.... Just black screen after HTC logo.... Any Ideas ? With Bootloader, Fastboot, and Recovery, you'd think I could unbrick, but no luck.
I'm sorry... I'm not a complete noob, I've been on the scene since early TP2s, and always rooted and custom rom’ed my Evo 4g.... Please help guys. Thanks in advance.
blckout99 said:
I have a Evo 3d, hboot 1.50 latest radios, prl, pri. I had OMJ's latest Rom, and used Flash Image Gui to flash a custom Kernel package; I flashed Tiamuts "Tiamat_E3D-v1.1.0-Sense" http://downloads.tiamat-dev.com/8x60/110/Tiamat_E3D-v1.1.0-Sense.zip, and rebooted, then my phone was locked up on just the HTC screen.
I can still access the Bootloader, and Fastboot, and Recovery. I tried rolling back to my nandroid backup, and also reflashing the stock kernel through recovery (as the Rom won't ully load), and now all I get is a black screen after the HTC logo, and the phone is responsive to power and capacitive buttons, but no display at all.
Tried full wipe, and reflash of OMJ, even CleanRom.... Just black screen after HTC logo.... Any Ideas ? With Bootloader, Fastboot, and Recovery, you'd think I could unbrick, but no luck.
I'm sorry... I'm not a complete noob, I've been on the scene since early TP2s, and always rooted and custom rom’ed my Evo 4g.... Please help guys. Thanks in advance.
Click to expand...
Click to collapse
Since you're on the HTC unlock method, in order for the custom recovery to properly work, i.e. flash all partitions including the kernel/boot partition, you have to access the custom recovery differently than the traditional method.
The proper command and method to access the custom recovery in order for the HTC unlock method to grant it write access to the kernel/boot partition is through fastboot. The full command is: fastboot boot c:\cwm-recovery.img . Once you've temporarily fastboot booted the custom recovery, you can then properly flash a ROM or restore a nandroid as both will be allowed write access to the kernel/boot partition.
Appreciate your support in using my application! Hope that helps!
Deleted my own question. I think I found a thread where it will be more appropriate.
Like joeykrim stated, you must access the recovery from fastboot to be able to flash kernels, nandroids and what not from recovery if you used HTC's method to unlock you phone. You are not bricked. It is fully fixable.
I have Clockwork Recovery flashed, always have (the only version compatible with Hboot 1.50, v4.0.1.4). I still have full access to the Bootloader, Customer Recovery, and Fastboot. But despite reflashing a fresh Rom (2 in fact), full wipes, reflashing boot.img with stock kernel; all the phone will do is boot past the HTC screen, vibrate, and the screen goes black. Capacitive buttons are responsive, and so is the power button, just no display. ...... Idk what else to Flash to get this phone booting again, any ideas ?
I had same problem I have 1 file name PG86IMG.zip I don't remember from where I downloaded 1st Iplaced this on SD root folder and turn on phone with volume down and power button and it care of everything
Sent from my PG86100 using XDA App
blckout99 said:
I have a Evo 3d, hboot 1.50 latest radios, prl, pri. I had OMJ's latest Rom, and used Flash Image Gui to flash a custom Kernel package; I flashed Tiamuts "Tiamat_E3D-v1.1.0-Sense" http://downloads.tiamat-dev.com/8x60/110/Tiamat_E3D-v1.1.0-Sense.zip, and rebooted, then my phone was locked up on just the HTC screen.
I can still access the Bootloader, and Fastboot, and Recovery. I tried rolling back to my nandroid backup, and also reflashing the stock kernel through recovery (as the Rom won't ully load), and now all I get is a black screen after the HTC logo, and the phone is responsive to power and capacitive buttons, but no display at all.
Tried full wipe, and reflash of OMJ, even CleanRom.... Just black screen after HTC logo.... Any Ideas ? With Bootloader, Fastboot, and Recovery, you'd think I could unbrick, but no luck.
I'm sorry... I'm not a complete noob, I've been on the scene since early TP2s, and always rooted and custom rom’ed my Evo 4g.... Please help guys. Thanks in advance.
Click to expand...
Click to collapse
You arent bricked if you can still get into fastboot, recovery, etc. I would recommend using this app called Flash Image GUI on the market, it's only $0.99 and I am (as we speak) flashing ziggy's dual core kernel. Oh wait my phone rebooted now. Its fast as all get out and my WiFi works (yay). But like I said this method is the EASIEST way to flash kernels!
up7up said:
I had same problem I have 1 file name PG86IMG.zip I don't remember from where I downloaded 1st Iplaced this on SD root folder and turn on phone with volume down and power button and it care of everything
Click to expand...
Click to collapse
I think the file you're referring to is the RUU (ROM Update Utility) file which can be placed in the root of the sdcard as PG86IMG.zip and flashed to competely reload all stock software (radios, system, kernel, etc) on the device.
These files are available at http://goo-inside.me/shooter/ruu.
blckout99 said:
I have Clockwork Recovery flashed, always have (the only version compatible with Hboot 1.50, v4.0.1.4). I still have full access to the Bootloader, Customer Recovery, and Fastboot. But despite reflashing a fresh Rom (2 in fact), full wipes, reflashing boot.img with stock kernel; all the phone will do is boot past the HTC screen, vibrate, and the screen goes black. Capacitive buttons are responsive, and so is the power button, just no display. ...... Idk what else to Flash to get this phone booting again, any ideas ?
Click to expand...
Click to collapse
Seems as if there is some issue with the display. If you confirm you have adb access to the device, I would think the issue lies in the android /system. If you don't have adb access, I would think the issue lies in the kernel/ramdisk.
Either way, if you want to eliminate both issues, reflash my Stock ROM - [ROM] joeykrim-original-1.2.0 Odex *Stock Rooted 2.08.651.2*, which will reload the stock kernel and the stock system with only adding in root access. I run this ROM as my daily ROM and it works great for keeping the phone stock but allowing root access.
Make sure to access the custom recovery through, fastboot boot c:\android\cwm-recovery.img . If you load the custom recovery through adb reboot recovery, or bootloader and selecting recovery from the menu, the HTC unlock method will not grant recovery write access to the kernel/boot partition.
Worse case, my stock ROM with stock Kernel doesn't resolve the display issue, you should flash the stock RUU files at http://goo-inside.me/shooter/ruu . If that doesn't resolve the issue, you'll prob need to exchange/return the device as it would seem to be a hardware issue.
Hope that helps! Good luck!
I flashed the new pkmn rom
I tried to change the volume steps
it rebooted but wont get past the splash screen and cant get into recovery
im on eng hboot 2.21
s-off
nevermind flashed a different recovery and i could access it
Btw to manually get into recovery:
Pull battery, put back in, hold volume down plus power.
From hboot select recovery
Hi
I have successfully installed clockworkmod and flash my gtablet into caynogenmod 7 beta a long time ago. I was pretty happy with it, even though there are issues. I have since also download the clockworkmod ROM manager app and even purchased the ROM manager premium. However, it has never worked. The ROM manager app will come up, but I am not able to use it to 1) boot into recovery, download ROM, install ROM from SD Card.
When I power off the tablet, it let me choose to boot into recovery or bootlaoder, but neither works.
I can't even get into the recovery mode anymore. If I pressed the power and volume key during boot, I will see one line saying that "detected a recovery key pressed" and then it will go right into normal booting instead of the recovery menu.
I am finally at the point I would like to get some newer ROMs. I am stuck. Can anyone gives me some suggestions on what is wrong and how to fix it? I greatly appreciate all your help.
Thanks.
I would suggest trying to nvflash back to stock (or the teamdrh nvflash) using apx mode. There may be something wrong with your recovery partition.
Or, you could nvflash the recovery directly, if that is available.
Sent from my SCH-I535 using xda app-developers app