happened after i flashed the official 2.3.3. Sound is crappy, and the images seem to switch slower, recalculations also works slower. It worked perfectly on froyo...
Same thing !someone has a solution?
Maybe you should contact Igo and ask them!
Cheers
tryed that, but no responce from them soever... yet.
stupi said:
happened after i flashed the official 2.3.3. Sound is crappy, and the images seem to switch slower, recalculations also works slower. It worked perfectly on froyo...
Click to expand...
Click to collapse
What version of igo do you have?
8.4.2.139242
Same problem, same version ...
It's all moving very slow
GT-i9000 2.3.4
Related
Hey,
I've tried almost all 2.2.1 ROMs now, frost, darky, atriarc, loki yet on none of these ROMs could I get the aGPS to work. It works flawlessly on 2.2 ROMs otherwise... What could be wrong?
I've tried faster fix, gingerbread.zip and sgps.zip from the forums, etc. already..
Sent from Bionix on Vibrant
then go back to 2.2... i don't see much change between 2.2 and 2.2.1 since we had voodoo on 2.2
but w/e
My gps was perfect when I was on Frost, after flashing sgps. Have you tried the hardware fix?
adyscorpius said:
Hey,
I've tried almost all 2.2.1 ROMs now, frost, darky, atriarc, loki yet on none of these ROMs could I get the aGPS to work. It works flawlessly on 2.2 ROMs otherwise... What could be wrong?
I've tried faster fix, gingerbread.zip and sgps.zip from the forums, etc. already..
Sent from Bionix on Vibrant
Click to expand...
Click to collapse
I have Simply Honey 2.5 with GPS fix plus there is another forum here:
http://forum.xda-developers.com/showthread.php?t=878970
This one has made my GPS best its ever been and probably best it will ever be considering it is Samsung..
Well, I did that immediately when I noticed that the 2.2.1 ROM isn't locking on... I had just replaced back the FFC mod camera and then I was planning to run 2.2.1 so that I can benefit from its camera firmware. So I thought maybe I screwed up the contact.
But that didn't happen. Once i flashed 2.2 back, i got a GPS lock in 15-17 seconds on every cold start.
Installed the sGPS.zip and Gingerbread.zip too, alternatively, and together, also done an ODIN and then fresh install, but none of it helps... Tried fasterfix too for India...
Anyone else facing this problem ???
Can anyone point me to a version of game that works on 2.3.3 ? I haven't found one that works for 2.3.2 either, even bought it from their site when it was on discount, can't seem to get it to work, always crashes to desktop immediately after starting it up.
Pretty lame.
Answering my own question - seems that v.3.1.6 works no probs on Arc that runs 2.3.3. They supplied me the .apk and it seems to have worked out.
Hello, Im about to upgrade my x10a to 2.3 using the flashtool. And i was wondering if everything works correctly and if it works with the x10a U.S.
Thanks A lot
Yes it does. It is working for me.
But I saw a post that someone in New York area is having difficulty to get the radio working.
hasei said:
Yes it does. It is working for me.
But I saw a post that someone in New York area is having difficulty to get the radio working.
Click to expand...
Click to collapse
Thanks, and what do you mean radio? Like the fm/am radio, because if its that,then im gonoing to that since i wont be using that.
no... it means gettign the signal!
reboot while getting signal found to be a little common happened to x10a user
me included
oh alright. Does it happen to you? or does it happen to everyone?
Don't worry, you can always go back to where you were if it doesn't work out, which I doubt will occur.
thanks a lot. I will be doing this soon. this is the official update? and is everything else working smoothly, example: the transition between pages and the touch?
Yes this is the official update. You would be the only judge to make sure everything works smoothly.
I'm glad that I upgraded!
Yeah, I did it and everything seems to work correctly. Now im going to root it. I just need find a way.
As far as I know conventional ways to root don't work.
http://forum.xda-developers.com/showthread.php?t=1196421
You may want to take a look at it. Or flash prerooted one like I did.
Does your phone customization version has the update released? If yes, update it through SEUS or PC Companion. FlashTool is just used for backup, I will not recommend to use it to upgrade OS.
Brunop10 said:
Yeah, I did it and everything seems to work correctly. Now im going to root it. I just need find a way.
Click to expand...
Click to collapse
I've found a better thread that shows how to root the official 2.3.
http://forum.xda-developers.com/showthread.php?t=1196808
I have flashed to 2.33 and my biggest complaint is that the phone reboots after using google navigation after about 10 minutes, and poor bt profiles, making my older se stereo headset unrecognised.
Sent from my X10i using XDA Premium App
Hello, I recently found a TP2 taking care of my dust and I was wondering if there are any Android ROMs for the phone. I know there are some, but I wanna know what's the ROM with the newest version of Android.
Thanks.
speakerstick said:
Hello, I recently found a TP2 taking care of my dust and I was wondering if there are any Android ROMs for the phone. I know there are some, but I wanna know what's the ROM with the newest version of Android.
Thanks.
Click to expand...
Click to collapse
the newest android version you can get is 2.3.7 gingerbread
thanks to xdandroid
http://xdandroid.com/wiki/Main_Page
battery indicator is kinda broken and also my phone used to overheat.... alot. there's also the froyo build (2.2 version), which might be more stable.
you have to find out for yourself which one works the best.
there's also an android 4 rom, but lots of features are not working. check it out yourself.
http://forum.xda-developers.com/showthread.php?t=1636005
CM7 for rhodium is interesting too, tho i couldn't get it to work somehow (difficulties flashing)
http://forum.xda-developers.com/showthread.php?t=1566955
plrusek said:
the newest android version you can get is 2.3.7 gingerbread
thanks to xdandroid
http://xdandroid.com/wiki/Main_Page
battery indicator is kinda broken and also my phone used to overheat.... alot. there's also the froyo build (2.2 version), which might be more stable.
you have to find out for yourself which one works the best.
there's also an android 4 rom, but lots of features are not working. check it out yourself.
http://forum.xda-developers.com/showthread.php?t=1636005
CM7 for rhodium is interesting too, tho i couldn't get it to work somehow (difficulties flashing)
http://forum.xda-developers.com/showthread.php?t=1566955
Click to expand...
Click to collapse
Ok, I did it, I used XDAndroid, but, is there a way to boot into android without Windows Mobile?
Thanks
speakerstick said:
Ok, I did it, I used XDAndroid, but, is there a way to boot into android without Windows Mobile?
Thanks
Click to expand...
Click to collapse
OMGB on NAND
http://forum.xda-developers.com/showthread.php?t=1347321
http://forum.xda-developers.com/showthread.php?t=1965459
Ok... I tried to install xdandroid GBX0, but wifi doesn't work, and then I went back to FRX0 and wifi doesn't work either... What do I do?
Help!
Thanks
wifi problems?
speakerstick said:
Ok... I tried to install xdandroid GBX0, but wifi doesn't work, and then I went back to FRX0 and wifi doesn't work either... What do I do?
Help!
Thanks
Click to expand...
Click to collapse
Why do you say the wifi doesn't work? I've been using Android on my Rhodium since June 2012 and I don't have problems with wifi--bluetooth, yes, but not wifi.
What makes you say it doesn't work? Is it not showing any wireless networks?
what version of the rhodium do you have? RHOD100? RHOD400? I have a RHOD400, and the devs are also using RHOD400's. They don't guarantee complete functionality on non-RHOD400's (that's actually mentioned somewhat by wizardknight at the end of post #1 of the GBX0* thread that wizardknight linked above
Hello, I too am having lots of troubles with finding a ROM that will work on my RHOD300. I started the whole install with a GBX_3.4.35_Full, then the GBX_3.4.26.13_FULL then the OMGB 1.2.3 May 4 and finally the OMGB Jan 16, and all of them have given me a non-working wi-fi. When I enable the bluetooth it actually turns on ok.
I've been using my HTC TP2 for 4 years as a WinMO phone and finally decided that I'd give this Android thing a try. The wi-fi has been working for me all along.
When I first installed the GBX it was giving me Wi-Fi error (viewing in Wireless & network settings). After I switched to the OMGB ROM I'm now getting a Wi-Fi turning on... and the option is grayed out.
I've been searching around and reading through these forums and I'm trying to find solutions, but nothing seems to work. The wifi-nvram-generic.txt file option I wish I could try but unfortunately I don't know the phones mac address without booting back into a WinMo phone.
I would be grateful if somebody could help me sort this out as I really do need to have wifi on my phone, otherwise my smart phone isn't so smart after all...
I've taken my RHOD100 out of the dust, and fired it up to NAND flash it with te 2.3.7 xda ROM. I used the GBX0*+3.4.26.13 Full for my device. Although it's not very snappy, it's acceptable after recalibrating the touch screen. Don't expect miracles. Wifi is working fine. Haven't tested BT yet.
The 3.4.35 version did boot a bit, but didn't get past the bootscreen, which seemed to be in an unending loop.
I doubt the GPS is working.. GPS test didn't get a fix in 15 minutes and did not see any satelites. Also no support for front camera... but hey.. who cares
Yo. I just got a new TP2 RHOD400 and i installed FRX07.1 full bundle on my phone (old rhod100 died and i think that is because of the GBX0 build).
It works better: smoother and doesn't make my battery hot. so - audio wasn't working, but i got this kernel:
http://forum.xda-developers.com/showthread.php?t=1076884
and so, after i thought everything is fine, the 3,5 headphone port doesn't work. it works when using usb adapter for headphones tho. so what do i do to make that port work?
plrusek said:
Yo. I just got a new TP2 RHOD400 and i installed FRX07.1 full bundle on my phone (old rhod100 died and i think that is because of the GBX0 build).
It works better: smoother and doesn't make my battery hot. so - audio wasn't working, but i got this kernel:
http://forum.xda-developers.com/showthread.php?t=1076884
and so, after i thought everything is fine, the 3,5 headphone port doesn't work. it works when using usb adapter for headphones tho. so what do i do to make that port work?
Click to expand...
Click to collapse
Why not try the gingerbread builds. They are a lot new and had a lot more work put into them.
wizardknight said:
Why not try the gingerbread builds. They are a lot new and had a lot more work put into them.
Click to expand...
Click to collapse
i installed them and came to conclusion that froyo build just works better for me. gbx0c works slower, drains my battery faster and makes it really warm. i would switch to gingerbread tho if the 3.5 port worked. unfortunately - i can't even get audio to work at all. i tried all the kernels i could find - not many tho, since most of the links died, like that one on xdandroid page. if you could provide a working link i'd be glad.
plrusek said:
i installed them and came to conclusion that froyo build just works better for me. gbx0c works slower, drains my battery faster and makes it really warm. i would switch to gingerbread tho if the 3.5 port worked. unfortunately - i can't even get audio to work at all. i tried all the kernels i could find - not many tho, since most of the links died, like that one on xdandroid page. if you could provide a working link i'd be glad.
Click to expand...
Click to collapse
Um, not sure what you are talking about.
This one has most of the things you talking about working just fine.
http://forum.xda-developers.com/showthread.php?t=1965459
wizardknight said:
Um, not sure what you are talking about.
This one has most of the things you talking about working just fine.
http://forum.xda-developers.com/showthread.php?t=1965459
Click to expand...
Click to collapse
this is on NAND, i'm talking about booting from sd card but i guess that's obsolete. after booting GBX0C froyo build is all broken. no idea what's happening so might as well try using your build.
plrusek said:
this is on NAND, i'm talking about booting from sd card but i guess that's obsolete. after booting GBX0C froyo build is all broken. no idea what's happening so might as well try using your build.
Click to expand...
Click to collapse
Did you try this kernel?
http://forum.xda-developers.com/showthread.php?t=2191981
wizardknight said:
Did you try this kernel?
http://forum.xda-developers.com/showthread.php?t=2191981
Click to expand...
Click to collapse
yeah i did. not much really changed.
anyway, i installed walter's cm7.2 rom and this fixes all of my problems.