New to android and the forms and looking into some info on seven guide. I would post on that page but since im new I can't so I thought I would start here. It shows that Canadian Atrix (OLYLA 0.37.4)is supported, now I have 2.2.2 OLYLA 0.37.23 as a build number. Since my build number is newer can I not use any of the methods posted on his guide. I alreadyhave it rooted with gingerbreak but I was looking to deodex the systm and run grey blur on the phone.
Thanks
Some roms are for the att version only I would go post on one of the roms you want and ask. The developer should be able to point you in the right way.
AT&T ATRIX - VERSION 2.3.4 ROOTED BL UNLOCKED
I know that done roms won't work on bell. Grayblur works adter flashing the smb. I just don't know if my build is supported or not
Sent from my MB860 using XDA App
cgallagher said:
I know that done roms won't work on bell. Grayblur works adter flashing the smb. I just don't know if my build is supported or not
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
Bell firmwares are not supported. You can run greyblur on the Frech SBF (2.1.1). It's very easy to get greyblur on a Bell Atrix, unfortunately it means flashing another SBF. It's not such a big deal anymore though because we have a method of getting back to stock Bell if need be. My advice: follow Seven's guide and flash greyblur or gingerblur on your phone. It's much smoother and I found a significant increase in battery life. If you don't like it, you can always find the guide in the general section that explains how to get back to Bell's firmware. It's all very straightforward if you follow the guides to a T. We are lucky to have such helpful members in the Atrix community!
thegregulator said:
Bell firmwares are not supported. You can run greyblur on the Frech SBF (2.1.1). It's very easy to get greyblur on a Bell Atrix, unfortunately it means flashing another SBF. It's not such a big deal anymore though because we have a method of getting back to stock Bell if need be. My advice: follow Seven's guide and flash greyblur or gingerblur on your phone. It's much smoother and I found a significant increase in battery life. If you don't like it, you can always find the guide in the general section that explains how to get back to Bell's firmware. It's all very straightforward if you follow the guides to a T. We are lucky to have such helpful members in the Atrix community!
Click to expand...
Click to collapse
Were is this guide you are talking about to revert back, do you have a link to it. My main thing is the guide from sever says the canadian atrix on build 0.37.4 is supported and im on a higher build 0.37.24. Can I still flash the french sbf to the phone to run greyblur ?
Thanks
Related
I just got an Atrix!!! and might I say that it is impressive especially coming from an iPhone 3gs. Anyways, I'm thinking about installing Gingerblur, but I have a few questions at hand. Is a root required to install Gingerblur? My guess is that it is, but I just want to make sure. Also, if I root 1.83 with gingerbreak will it immediately be compatible with Gingerblur? In other words, is Gingerblur compatible with 1.83, or do I need to flash to earlier 1.57 or earlier? Sorry for all these questions. Coming from iOS, I am a complete newbie at android, but I seem to like it so far
ethantarheels123 said:
I just got an Atrix!!! and might I say that it is impressive especially coming from an iPhone 3gs. Anyways, I'm thinking about installing Gingerblur, but I have a few questions at hand. Is a root required to install Gingerblur? My guess is that it is, but I just want to make sure. Also, if I root 1.83 with gingerbreak will it immediately be compatible with Gingerblur? In other words, is Gingerblur compatible with 1.83, or do I need to flash to earlier 1.57 or earlier? Sorry for all these questions. Coming from iOS, I am a complete newbie at android, but I seem to like it so far
Click to expand...
Click to collapse
Yea, he kind of already answers all of your questions...
To actually answer your questions:
1. You must be rooted to install these "ROMs" like Gingerblur and such.
2. GingerBlur IS currently compatible with 1.8.3, which can be rooted with Gingerbreak.
3. After rooting, enable sideloading (I used GladEnable) and then install Tenfar's Recovery. (All these things can be found if you browse the dev forum)
4. Maybe make a backup of your phone as is while in Tenfar's. Then you use that to flash the Gingerblur ROM.
This is just a basic outline of what you do...make SURE you read directions for ALLLLLLL of these things thoroughly before you do anything.
ethantarheels123 said:
I just got an Atrix!!! and might I say that it is impressive especially coming from an iPhone 3gs. Anyways, I'm thinking about installing Gingerblur, but I have a few questions at hand. Is a root required to install Gingerblur? My guess is that it is, but I just want to make sure. Also, if I root 1.83 with gingerbreak will it immediately be compatible with Gingerblur? In other words, is Gingerblur compatible with 1.83, or do I need to flash to earlier 1.57 or earlier? Sorry for all these questions. Coming from iOS, I am a complete newbie at android, but I seem to like it so far
Click to expand...
Click to collapse
Go here -------> GingerBlur Thread -----------------> READ ------------> Maybe go here ---------------> Noob guide from GingerBlur thread ----------> Follow instructions!
ok, lol. I just kinda guessed but good to know! Thanks guys!
Noob!
Hi I am a NOOB!
I am unable to post in the Gingerblur Forum as I'm a NOOB lol!
I have a question....
Can Orange UK Atrix Owners install Gingerblur?
There is a Big warning in the Gingerblur Thread warning Bell Atrix Owners not to download but i don't see anything about Orange UK Owners?
I have tried to search but can't find anything specific.
Thanks
James
Hi guys,
I have a motorola Atrix AT & T version 1.83, I would like to upgrade to 2.3.4 gingerbread, what should I do?
someone can explain well all the steps I need to do.
I've already unlocked bootloader
If you are smart enough to unlock the bootloader, I am assuming you would be smart enough to know where to post your question?
There is already step by step instructions in here on how to install CWM and then 2.3.4.
Pat123 said:
If you are smart enough to unlock the bootloader, I am assuming you would be smart enough to know where to post your question?
Click to expand...
Click to collapse
if only
Search button broken?
Sent from my MB860 using XDA App
alexrita said:
Hi guys,
I have a motorola Atrix AT & T version 1.83, I would like to upgrade to 2.3.4 gingerbread, what should I do?
someone can explain well all the steps I need to do.
I've already unlocked bootloader
Click to expand...
Click to collapse
The previous posts are right, you should probably get in the habit of searching around a bit before posting questions.
Either way, here's a link to the instructions on how to flash the 2.3.4 HKTW build to an unlocked Atrix. If you are AT ALL uncomfortable with the instructions, worried about voiding your warranty or this is your first time then you should probably wait for an official ROM to be released. Be forewarned, there are still a bunch of bugs still to be worked out.
http://forum.xda-developers.com/showthread.php?t=1138092
shaunole said:
The previous posts are right, you should probably get in the habit of searching around a bit before posting questions.
Either way, here's a link to the instructions on how to flash the 2.3.4 HKTW build to an unlocked Atrix. If you are AT ALL uncomfortable with the instructions, worried about voiding your warranty or this is your first time then you should probably wait for an official ROM to be released. Be forewarned, there are still a bunch of bugs still to be worked out.
http://forum.xda-developers.com/showthread.php?t=1138092
Click to expand...
Click to collapse
One thing to note. With a bit of tweaking, specifically modifying of /system/build.prop, this build is fully functional as far as i can tell, minus the front facing camera and fingerprint scanner being broken, so depending on your needs, it CAN be ready for daily use. The CWM flashable version of 2.3.4 seems to be much more broken than independently flashing /system and /boot.
Where do I go from here?????
I am a newbie and so far have been lucky enough to not brick my phone, but I feel I'm getting in over my head now.
I have read & eaten about as much Gingerbread, froyo, & pudding that I can handle. Here is what I have and what I want to have.
HAVE: Att MB 860 Atrix , rooted, unlocked, 2.2.2, 4.1.83, gingerblur 4.5.
WANT : Stock Gingerbread or if not possible then any good proven mod.
Have NOT installed pudding....at least I don't think I have.
Have installed Tenfar's Recovery, but not sure if it is up to date.
Need step by step instructions to install Gingergread...
Any help will be appreciated!!!
Thanks & sorry If I've left out any needed info.
ragtag58 said:
Where do I go from here?????
I am a newbie and so far have been lucky enough to not brick my phone, but I feel I'm getting in over my head now.
I have read & eaten about as much Gingerbread, froyo, & pudding that I can handle. Here is what I have and what I want to have.
HAVE: Att MB 860 Atrix , rooted, unlocked, 2.2.2, 4.1.83, gingerblur 4.5.
WANT : Stock Gingerbread or if not possible then any good proven mod.
Have NOT installed pudding....at least I don't think I have.
Have installed Tenfar's Recovery, but not sure if it is up to date.
Need step by step instructions to install Gingergread...
Any help will be appreciated!!!
Thanks & sorry If I've left out any needed info.
Click to expand...
Click to collapse
Well if you want to go to gingerbread then 1st thing 1st is
lets do pudding
Open rsd lite make sure its 5.3.1 version.
Put phone in rsd and use pudding.
LINK:http://forum.xda-developers.com/showthread.php?t=1136261
Once you flash pudding.
lets check to make sure you have updated CWM (clockworkmod)
LINK:http://forum.xda-developers.com/showthread.php?t=1138541
FYI You have to use fastboot to install this if you need help ask.
I have typed a guide and there is one on here somewhere.
After you install CWM download Kennethpenns Gingerbread beta. ( REALLY STABLE) I use this daily as i use my phone for work.
LINK:
http://forum.xda-developers.com/showthread.php?t=1159385
Has Preinstalled Root. Works great.
Mods are op. look around.
Please post if you need help.
183_pudding.rar??? Is this the file I need?
Yes, The 1.8.3 pudding.
do you have a msg-er I can walk you thur it.
Xenocyde said:
Yes, The 1.8.3 pudding.
do you have a msg-er I can walk you thur it.
Click to expand...
Click to collapse
It will be a while.... Got a slow connection for the download. Google talk- jjseifert
ragtag58 said:
Where do I go from here?????
I am a newbie and so far have been lucky enough to not brick my phone, but I feel I'm getting in over my head now.
I have read & eaten about as much Gingerbread, froyo, & pudding that I can handle. Here is what I have and what I want to have.
HAVE: Att MB 860 Atrix , rooted, unlocked, 2.2.2, 4.1.83, gingerblur 4.5.
WANT : Stock Gingerbread or if not possible then any good proven mod.
Have NOT installed pudding....at least I don't think I have.
Have installed Tenfar's Recovery, but not sure if it is up to date.
Need step by step instructions to install Gingergread...
Any help will be appreciated!!!
Thanks & sorry If I've left out any needed info.
Click to expand...
Click to collapse
try my guide its a detailed video not to discredit anyothers just some people like visual spoken guides. : http://forum.xda-developers.com/showthread.php?t=1179506
Hi, guys. I have got a new atrix 4G and it is running on 4.5.91.MB860.ATT.en.US. The phone is completely fresh without root and bl unlocked. I 'd like to know if it is possible and safe to directly RSD HKTW 2.34 OTA sbf ?
thanks
sangecoa said:
Hi, guys. I have got a new atrix 4G and it is running on 4.5.91.MB860.ATT.en.US. The phone is completely fresh without root and bl unlocked. I 'd like to know if it is possible and safe to directly RSD HKTW 2.34 OTA sbf ?
thanks
Click to expand...
Click to collapse
NEVER, EVER EVER EVER use RSD except to unlock the bootloader! Flash clockwork mod and stick with cwm zips. You can find official motorola roms in cwm zip format here:
http://forum.xda-developers.com/showthread.php?t=1163009
RSD will hard brick your phone if you flash firmware meant for other regions or use it to downgrade!
Also... why would you want the HKTW build? Its meant for the ME860 and not the AT&T MB860, and has horrendous battery life as a result. 4.5.91 should be the current version of Gingerbread, so you'd gain nothing? If you really wanted to, nothing is stopping you form using a cwm zip from the link above though.
Jotokun said:
NEVER, EVER EVER EVER use RSD except to unlock the bootloader! Flash clockwork mod and stick with cwm zips. You can find official motorola roms in cwm zip format here:
http://forum.xda-developers.com/showthread.php?t=1163009
RSD will hard brick your phone if you flash firmware meant for other regions or use it to downgrade!
Also... why would you want the HKTW build? Its meant for the ME860 and not the AT&T MB860, and has horrendous battery life as a result. 4.5.91 should be the current version of Gingerbread, so you'd gain nothing? If you really wanted to, nothing is stopping you form using a cwm zip from the link above though.
Click to expand...
Click to collapse
Thanks for the info. I am just a noob so RSD seems pretty straightforward to me. I have read some threads here and noticed that its easily got hard-brick when try to downgrade it from 4.5.91 to any older version. But someone suggests that there should be no problem to RSD among 4.5.91s as they use the same bl.
This phone is gonna be given to my friend in China, so for the reason I 'd need to alert the OS. But strange thing is that I saw many users reporting the good battery performance of HKTW build in Chinese forum.
sangecoa said:
Thanks for the info. I am just a noob so RSD seems pretty straightforward to me. I have read some threads here and noticed that its easily got hard-brick when try to downgrade it from 4.5.91 to any older version. But someone suggests that there should be no problem to RSD among 4.5.91s as they use the same bl.
This phone is gonna be given to my friend in China, so for the reason I 'd need to alert the OS. But strange thing is that I saw many users reporting the good battery performance of HKTW build in Chinese forum.
Click to expand...
Click to collapse
That would be beacuse the ME860 is the Chinese version of the Atrix. The battery life issues are people who flash that build onto an American/European Atrix.
While RSD shouldn't brick from 4.5.91 and higher, going from a build meant for one region to another can still cause problems. The HKTW build is not 4.5.91 if my memory serves me right.
Hi All,
First of all I would like to thank everyone at XDA who has invested their lives to make our phones look and work better day by day...
I am very confused right now and have been searching the whole internet for three weeks now but didn't got any solution as yet.
I have got a Motorola Atrix 4G from Korea that has the following information:
Model : MB860
S/W Version : 4.5.2A- SKT-167
Android Version : 2.3.5
Kernel Version : 2.6.32.9- 00004-gfbc 746e
My problem is that the stock rom currently installed is flooded with Korean language. I want to put a pure english stock rom into my Atrix that has all the stock options enabled. Which rom is suitable for this purpose and also as Korean SKT version doesn't have SBF files over the internet, therefore how can I restore to stock if things went into the wrong direction. BTW I have already rooted my phone.
While searching, found some files at "main.develoid.com:81/%40%20MOTOROLA/Atrix/" that I am not sure helpful for any thing or not.
Thanks in advance for all your help and support.
Ignore this and search for "how to know if my atrix is bell or ATT", then flash the proper sbf
ticiano_arraes said:
Ignore this and search for "how to know if my atrix is bell or ATT", then flash the proper sbf
Click to expand...
Click to collapse
Thanks for ur reply but I am already aware of this fact that my Atrix is not from any of these two i.e. ATT or Bell. My phone is from Korea and is from SK Telecom South Korea. It is a MB860 with SKT software version.
The SKT is the version of the rom. There are only 2 atrix models: ATT and Bell. It doesnt matter where are you from, my Atrix is Bell and we dont even have it in Brazil...
D-r-e-a-m-e-r said:
Hi All,
First of all I would like to thank everyone at XDA who has invested their lives to make our phones look and work better day by day...
I am very confused right now and have been searching the whole internet for three weeks now but didn't got any solution as yet.
I have got a Motorola Atrix 4G from Korea that has the following information:
Model : MB860
S/W Version : 4.5.2A- SKT-167
Android Version : 2.3.5
Kernel Version : 2.6.32.9- 00004-gfbc 746e
My problem is that the stock rom currently installed is flooded with Korean language. I want to put a pure english stock rom into my Atrix that has all the stock options enabled. Which rom is suitable for this purpose and also as Korean SKT version doesn't have SBF files over the internet, therefore how can I restore to stock if things went into the wrong direction. BTW I have already rooted my phone.
While searching, found some files at "main.develoid.com:81/%40%20MOTOROLA/Atrix/" that I am not sure helpful for any thing or not.
Thanks in advance for all your help and support.
Click to expand...
Click to collapse
unlock the bootloader, install CWM, upload the files to dropbox/mediafire, install any CM7 based roms
ticiano_arraes said:
The SKT is the version of the rom. There are only 2 atrix models: ATT and Bell. It doesnt matter where are you from, my Atrix is Bell and we dont even have it in Brazil...
Click to expand...
Click to collapse
I have googled but haven't been able to find anything useful regarding ATT and Bell. Have found a new info as the FCC ID for ATT and Korean Atrix are different
ATT Atrix 4G FCC ID: IHDP56LS1
My Korean Atrix 4G FCC ID: IHDP56LS2
I am not sure as if this has something to do but I considered it worth sharing...
See this: http://forum.xda-developers.com/showthread.php?t=1136261
I guess the proper sbf for your phone is where says
Orange/Bell/Telestra/Latin America/International users ONLY - Download IHOP
Click to expand...
Click to collapse
D-r-e-a-m-e-r said:
Hi All,
First of all I would like to thank everyone at XDA who has invested their lives to make our phones look and work better day by day...
I am very confused right now and have been searching the whole internet for three weeks now but didn't got any solution as yet.
I have got a Motorola Atrix 4G from Korea that has the following information:
Model : MB860
S/W Version : 4.5.2A- SKT-167
Android Version : 2.3.5
Kernel Version : 2.6.32.9- 00004-gfbc 746e
My problem is that the stock rom currently installed is flooded with Korean language. I want to put a pure english stock rom into my Atrix that has all the stock options enabled. Which rom is suitable for this purpose and also as Korean SKT version doesn't have SBF files over the internet, therefore how can I restore to stock if things went into the wrong direction. BTW I have already rooted my phone.
While searching, found some files at "main.develoid.com:81/%40%20MOTOROLA/Atrix/" that I am not sure helpful for any thing or not.
Thanks in advance for all your help and support.
Click to expand...
Click to collapse
Please remember that questions go in the Q&A section.
Contrary to what was posted earlier, there are three Atrix models (MB860, MB861, and ME860). But you seem to know which one you have already. Also, never flash an SBF unless you have no other choice.
Did you try going to Settings, Language & keyboard, Select locale and see if you can choose English? Might not work because I think that is the Korean GB235 software.
Is the device rooted with an unlocked bootloader? If so, you should be able to flash a AT&T stock fruit cake.
upndwn4par said:
Please remember that questions go in the Q&A section.
Contrary to what was posted earlier, there are three Atrix models (MB860, MB861, and ME860). But you seem to know which one you have already. Also, never flash an SBF unless you have no other choice.
Did you try going to Settings, Language & keyboard, Select locale and see if you can choose English? Might not work because I think that is the Korean GB235 software.
Is the device rooted with an unlocked bootloader? If so, you should be able to flash a AT&T stock fruit cake.
Click to expand...
Click to collapse
Thanks for your reply. My apologies for posting into the wrong section.
Right now my phone is rooted but not unlocked yet. I wanted to be safe before I can actually modify it. Least I could have a restore point to return. Thats why asking the experts for an advice.
My only issue is not the language but most of english characters are shown wrong whenever I receive a SMS. Can only have caller ID for SMS (contact numbers with +) or for the call (removing the + sign from all contact numbers). Can only send SMS with 80 characters otherwise it is converted into a MMS.
Instead of solving all these issues one by one, I believe installing a stock english rom would solve my problem. The only problem is that I am not sure which ROM can I use and what can I do if I end up into a soft brick phone.
Thanks again for taking the time to look into my problem.
D-r-e-a-m-e-r said:
Thanks for your reply. My apologies for posting into the wrong section.
Right now my phone is rooted but not unlocked yet. I wanted to be safe before I can actually modify it. Least I could have a restore point to return. Thats why asking the experts for an advice.
My only issue is not the language but most of english characters are shown wrong whenever I receive a SMS. Can only have caller ID for SMS (contact numbers with +) or for the call (removing the + sign from all contact numbers). Can only send SMS with 80 characters otherwise it is converted into a MMS.
Instead of solving all these issues one by one, I believe installing a stock english rom would solve my problem. The only problem is that I am not sure which ROM can I use and what can I do if I end up into a soft brick phone.
Thanks again for taking the time to look into my problem.
Click to expand...
Click to collapse
Text information will probably never display properly with the Korean OS. Probably a combination of language and carrier differences.
Flashing an English ROM will solve your problems. Be sure to follow instructions for unlocking the bootloader for the Korean Atrix in the dev section. You can install any custom ROM. You can also install a stock ROM, but may have to make changes to locale and APN settings - no biggie.
upndwn4par said:
You can also install a stock ROM, but may have to make changes to locale and APN settings - no biggie.
Click to expand...
Click to collapse
This is where I get lost ((((((((((
I have apmel experience of flashing my old HD2. I even did it with my eyes closed. Thanks to XDA for the load of development and user training.
Atrix is a little complex (or maybe I am more cautioned). Which stock english rom will work for me? I have also read within the forum that Korean Atrix can take Telstra Stock ROM but still I am not sure about it.
D-r-e-a-m-e-r said:
This is where I get lost ((((((((((
I have apmel experience of flashing my old HD2. I even did it with my eyes closed. Thanks to XDA for the load of development and user training.
Atrix is a little complex (or maybe I am more cautioned). Which stock english rom will work for me? I have also read within the forum that Korean Atrix can take Telstra Stock ROM but still I am not sure about it.
Click to expand...
Click to collapse
Just to be clear, when I say stock ROM I mean a fruit cake. Some associate stock with sbf. As I said before, never flash an sbf (OK, only once when unlocking your bootloader). I recommend flashing this fruit cake to get you started. If you are not on AT&T, look here for changing your APN. But the very next step you take will be to unlock your bootloader. Worry about the rest later.
Thx for everything
I will unlock the bootloader tomorrow.
For the ROM, are u advising me to flash stock ATT fruitcake. Would ATT software be compatible with my phone's hardware?
Plz accept my apologies for bring unnecessarily demanding but I am very cautioned about flashing my Atrix mainly as it lacks support from Motorola.
Thanks again...
Sent from my MB860 using xda app-developers app
Can I use the fruit cakes given within this link:
"forum.xda-developers.com/showthread.php?t=1163009"
Also right now I am on GB 2.3.5 and if I go for ATT GB 2.3.6 fruit cake, can I downgrade to 2.3.5 with my stock backup? What I have understood during all my search is that Atrix could get hard bricked if downgraded. Please advice.
D-r-e-a-m-e-r said:
Can I use the fruit cakes given within this link:
"forum.xda-developers.com/showthread.php?t=1163009"
Also right now I am on GB 2.3.5 and if I go for ATT GB 2.3.6 fruit cake, can I downgrade to 2.3.5 with my stock backup? What I have understood during all my search is that Atrix could get hard bricked if downgraded. Please advice.
Click to expand...
Click to collapse
make sure you make a CWM backup of your rom first and put it in dropbox/mediafire
D-r-e-a-m-e-r said:
Thx for everything
I will unlock the bootloader tomorrow.
For the ROM, are u advising me to flash stock ATT fruitcake. Would ATT software be compatible with my phone's hardware?
Plz accept my apologies for bring unnecessarily demanding but I am very cautioned about flashing my Atrix mainly as it lacks support from Motorola.
Thanks again...
Sent from my MB860 using xda app-developers app
Click to expand...
Click to collapse
D-r-e-a-m-e-r said:
Can I use the fruit cakes given within this link:
"forum.xda-developers.com/showthread.php?t=1163009"
Also right now I am on GB 2.3.5 and if I go for ATT GB 2.3.6 fruit cake, can I downgrade to 2.3.5 with my stock backup? What I have understood during all my search is that Atrix could get hard bricked if downgraded. Please advice.
Click to expand...
Click to collapse
Yes, AT&T fruit cakes will be compatible You can flash any fruit cake you want, you will just need to makes the changes I posted earlier.
The one thing I forgot to mention before: depending on your country and carrier, you may need to flash a different radio. Those are available at the Atrix Reboot Project.
Once your bootloader is unlocked you can flash or restore anything want. Your phone will be free!
arqda said:
make sure you make a CWM backup of your rom first and put it in dropbox/mediafire
Click to expand...
Click to collapse
Yep this is the only workaround I have to go stock if something went off the plan
Thanks for the tip though.
upndwn4par said:
Yes, AT&T fruit cakes will be compatible You can flash any fruit cake you want, you will just need to makes the changes I posted earlier.
The one thing I forgot to mention before: depending on your country and carrier, you may need to flash a different radio. Those are available at the Atrix Reboot Project.
Once your bootloader is unlocked you can flash or restore anything want. Your phone will be free!
Click to expand...
Click to collapse
Many thanks
I will start off with flashing process tomorrow and will post the results accordingly.
Finally I did it
I have unlocked the bootloader and complete backup of my phone with CWM and ROM Factory.
CWM has given me a folder full of 6 files and ROM Factory has given me a .zip file and a folder workdir.
I believe now I am on the safe side to flash custom ROMs.
People like me can head to this post that I have followed to do things forum.xda-developers.com/showthread.php?t=1302423
Many thanks upndwn4par for the sincere help.
Moreover I would also like to thank all the developers working hard to make our phones what they are really today... Really appreciated :good:
Please advise if my backup is accurate. Also direct me to the place where can I drop these files to help other users with a similar phone.
D-r-e-a-m-e-r said:
I have unlocked the bootloader and complete backup of my phone with CWM and ROM Factory.
CWM has given me a folder full of 6 files and ROM Factory has given me a .zip file and a folder workdir.
I believe now I am on the safe side to flash custom ROMs.
People like me can head to this post that I have followed to do things forum.xda-developers.com/showthread.php?t=1302423
Many thanks upndwn4par for the sincere help.
Moreover I would also like to thank all the developers working hard to make our phones what they are really today... Really appreciated :good:
Please advise if my backup is accurate. Also direct me to the place where can I drop these files to help other users with a similar phone.
Click to expand...
Click to collapse
Backup strategy is correct. The fruit cake won't work as is. Upload workdir or the zip to the Atrix Reboot Project and I'll fix it and put it back.
Edit: You can also post a dropbox link. Whatever works.
Edit 2:
Forgot to say congrats on unlocking your bootloader!
Also, could you post a link here?
http://forum.xda-developers.com/showthread.php?p=32514993#post32514993
Thanks!