Related
i know you cant do it with holding down the keys anymore i read the threads and i know its blocked. but i messed up the rom and i want to odin back to stock.. how d i do it? my phone is just stuck on vibrant screen... please help
http://forum.xda-developers.com/showthread.php?t=771247
Search is your friend.
zephiK said:
http://forum.xda-developers.com/showthread.php?t=771247
Search is your friend.
Click to expand...
Click to collapse
i tired it but the keys are locked no matter what combination i try it just wont work.
someone please help.... i am stuck with computer screen on my vibrant and hardware locked how do i get to download more
man, you are just full of fail aren't you. 7 posts, and all negative. Willing to bet you go 8 for 8.
from the posted link:
METHOD 2: STUCK AT VIBRANT SCREEN:
(and are not able to use vol+ vol- methods to access downloader/recovery)
You will need the samsung ADB drivers installed for your phone as well as ADB...
ACCESS DOWNLOAD MODE
1) remove back cover and take our sim card and sd-card.
2) take out the battery
3) hold ALL 3 buttons down at the same time. (Vol +, Vol -, Power)
4) while holding down those 3 buttons put the battery back in
5) continue holding all 3 buttons until the vibrant disappears and reappears... once it reappears, release all 3 buttons
6) Setup ODIN and get it all setup and ready... (if you are flashing your phone via odin)
6) now connect your phone to your pc via USB cable
7) open a cmd prompt and navigate to the folder with ADB and type ADB REBOOT DOWNLOAD
8) Your phone will reboot into the download screen... go back to ODIN - A com port should now appear for your phone...
9) Click start and wait for your phone to do its thing
ACCESS STOCK RECOVERY
1) remove back cover and take our sim card and sd-card.
2) take out the battery
3) hold ALL 3 buttons down at the same time. (Vol +, Vol -, Power)
4) while holding down those 3 buttons put the battery back in
5) continue holding all 3 buttons until the vibrant disappears and reappears... once it reappears, release all 3 buttons
6) now connect your phone to your pc via USB cable
7) open a cmd prompt and navigate to the folder with ADB and type ADB REBOOT RECOVERY
8) Your phone will reboot into the stock recovery and flash whatever update.zip you need
s15274n said:
man, you are just full of fail aren't you. 7 posts, and all negative. Willing to bet you go 8 for 8.
Click to expand...
Click to collapse
can u please help me get to download mode..
s15274n said:
man, you are just full of fail aren't you. 7 posts, and all negative. Willing to bet you go 8 for 8.
from the posted link:
METHOD 2: STUCK AT VIBRANT SCREEN:
(and are not able to use vol+ vol- methods to access downloader/recovery)
You will need the samsung ADB drivers installed for your phone as well as ADB...
ACCESS DOWNLOAD MODE
1) remove back cover and take our sim card and sd-card.
2) take out the battery
3) hold ALL 3 buttons down at the same time. (Vol +, Vol -, Power)
4) while holding down those 3 buttons put the battery back in
5) continue holding all 3 buttons until the vibrant disappears and reappears... once it reappears, release all 3 buttons
6) Setup ODIN and get it all setup and ready... (if you are flashing your phone via odin)
6) now connect your phone to your pc via USB cable
7) open a cmd prompt and navigate to the folder with ADB and type ADB REBOOT DOWNLOAD
8) Your phone will reboot into the download screen... go back to ODIN - A com port should now appear for your phone...
9) Click start and wait for your phone to do its thing
ACCESS STOCK RECOVERY
1) remove back cover and take our sim card and sd-card.
2) take out the battery
3) hold ALL 3 buttons down at the same time. (Vol +, Vol -, Power)
4) while holding down those 3 buttons put the battery back in
5) continue holding all 3 buttons until the vibrant disappears and reappears... once it reappears, release all 3 buttons
6) now connect your phone to your pc via USB cable
7) open a cmd prompt and navigate to the folder with ADB and type ADB REBOOT RECOVERY
8) Your phone will reboot into the stock recovery and flash whatever update.zip you need
Click to expand...
Click to collapse
i tired all of them it does not work!!
is there anyway of getting back? am i totally bricked? man this is so frustrating.... why did i get a replaced vibrant i feel so stupid now
then its obviously
METHOD 4: STUCK AT PHONE ! COMPUTER:
(and are not able to use vol+ vol- methods to access downloader/recovery)
NO SUCCESSFUL METHOD DISCOVERED... Please read through the thread and help us figure this out
Click to expand...
Click to collapse
cant help you unless a fix is found for that or you're doing the methods wrong.. stop double posting, you shouldn't of tried to mess with your phone if you knew in the first place that you weren't able to get into download mode manually
What exactly did you do to your phone to mess it up?
zephiK said:
then its obviously
cant help you unless a fix is found for that or you're doing the methods wrong.. stop double posting, you shouldn't of tried to mess with your phone if you knew in the first place that you weren't able to get into download mode manually
Click to expand...
Click to collapse
omgg so i m stuck? wow i feel so stupid.. what are my options..
2012iawait said:
is there anyway of getting back? am i totally bricked? man this is so frustrating.... why did i get a replaced vibrant i feel so stupid now
Click to expand...
Click to collapse
I never got the other methods to work, but this always worked for me. Pull battery, put back in. do not touch the power key. Hold the up and down volume key, then plug in the usb that is already connected to the computer.
Sent from my SGH-T959 using XDA App
wildklymr said:
I never got the other methods to work, but this always worked for me. Pull battery, put back in. do not touch the power key. Hold the up and down volume key, then plug in the usb that is already connected to the computer.
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
didnt work... was your phones keys disabled also?
flameinthefire said:
didnt work... was your phones keys disabled also?
Click to expand...
Click to collapse
well i am sending this one back to tmobile its rooted and its on vibrant r3 rom is that ok? because they will send me new one. i guess they will have to re-flash it to odin so it should;t matter because once they do that i wont be rooted.
why are yall posting adb instructions when we cannot acess adb since are phones are stuck on the vibrant screen?? i was able to use hardware key method until i just tried to reflash with odin now my phone just sits at the galaxy s screen and i cannot get it into download mode to fix now. swo does anyone have any more methods?
i tried to flash 2.2 using odin but i cant select reboot or any other command on the list.. what do i do? or is my phone done?
Lavundra21 said:
i tried to flash 2.2 using odin but i cant select reboot or any other command on the list.. what do i do? or is my phone done?
Click to expand...
Click to collapse
No sir, you should be just fine, try to reflash back to stock using odin, pull the battery remove the sim and sd card, and then go into downloader mode, and try again.
stock FW here, good luck.
Lavundra21 said:
i tried to flash 2.2 using odin but i cant select reboot or any other command on the list.. what do i do? or is my phone done?
Click to expand...
Click to collapse
Read the froyo thread you need to adb reboot
Sent from my SGH-T959 using XDA App
still cant get it to work... i dunno what im doing wrong. but it seems like all the files needed arent in the link from above.
Keep trying
Try enter "downloading mode" with the sd card in the phone(after many attempts it worked for me), there is a thread in this forum about how to enter "downloading mode" and flash the phone.
still cant get out of the android system recovery mode.. ive tried holding buttons down while turning the phone on and off and theres nothng happening. still cant use the power button as the ok.
i got the same problem i cant use any button as ok
is there a way to get the ok button, or what i can do to get over this problem
thanks in advance
Let me know if these steps help:
Here is a couple of methods to get into download mode. Once you get to
download mode, follow the directions in second part of my post...
First Method
1) Pull the battery, sim card, and sd card.
2) Reinsert battery but do not press any buttons.
3) Plug into usb that is connected to your computer. If something shows up
on the screen (charging logo) then you should be golden.
4) Hold the vol up, vol down, and power until the screen comes on,
immediately release the power button but not the other two. Hopefully it
will boot into download mode and than you can use Odin to get back to stock.
Second Method
1) Another method that seems to work for some people is to pull the battery,
sim, sd card.
2) Reinsert battery and hold both volume buttons but do not press power
button.
3) Then plug in usb. The phone should boot into download.
Third Method
1) You will need the samsung ADB drivers installed for your phone and ADB.
Samsung Drivers for 32 bit Windows: http://files.androidspin.com/downlo...=SAMSUNG_USB_Driver_for_Mobile_Phones_x86.exe
Samsung Drivers for 64 bit Windows: http://files.androidspin.com/downlo...ung/vibrant/&file=usb_drivers_GalaxyS_x64.zip
2) Remove sim card and sd-card. Remove the battery.
3) Hold buttons vol up, vol down, and power.
4) While holding down those 3 buttons put the battery back in and keep
holding all 3 buttons until the vibrant disappears and reappears. Once it
reappears, release all 3 buttons.
5) Now connect your phone to your pc via USB cable.
6) Open a cmd prompt and navigate to the folder with ADB and type "ADB
REBOOT DOWNLOAD" caps are not necessary.
7) Your phone will reboot into the download
How to get back to stock once in Download Mode:
Download the files in the linked thread and follow the directions there or
the ones in my post below.
Odin and Files Needed Available Here: http://forum.xda-developers.com/showthread.php?t=734475
1) Open Odin and verify that one of the Com ports shows a device connected.
If it doesn't try using a different usb port.
2) Load the .pit and pda files. It should be pretty obvious how to do that
once you are in Odin.
3) Make sure that the option to partition is unchecked. The other two
options should be checked.
4) Hit start and wait.
5) Your phone will restart when Odin is done and you will be good to go.
Seems to be the same issue
I just tried upgrading to 2.2 using Odin and this seems to be the same problem. It seems that every solution starts with, "Enter Into Download Mode..." but no method seems to work.
I wouldn't say the phone is "bricked" as when it is plugged into a computer it will install the drivers and Odin sees it, but I can't get it into anything but recovery mode.
The buttons seem to be strangely mapped, the up and down buttons are reversed and the power button doesn't seem to be working as the "Ok" button. The menu toggles the recovery screen and the <!> graphic with the Android. Anyone figured out how to solve this? In the meantime I will continue attempting to get into download moad.
Hi, I have the same exact problem. Stuck in system recovery. Volume buttons reversed. Power button does nothing. Cannot get into download mode. Please Help
what happened?
I just got the same issue :S
the volumes buttons are wrong and the power (OK) button is not working on system recovery mode...
any help?
same problem - samsung galaxy vibrant
brianking21 said:
Hi, I have the same exact problem. Stuck in system recovery. Volume buttons reversed. Power button does nothing. Cannot get into download mode. Please Help
Click to expand...
Click to collapse
can't mount /dev/block/mmcblk0p1
(invalid argument)
e:copya_dbdata_media:can't mount SDCARD:
your storage not prepared yet, please use UI menu for format and reboot actions
copy default media content failed
Folks, any update regarding this problem. I got very same problem, and could not find a solution yet.
hints?
I have the same problem also. I got into the problem by following a thread down grading to 2e version from 3e version. I've tried lots of things including going back to stock--or what I think is stock. I now have the 3e version again but when I bring up recovery mode the up/down buttons are backwards and the ok (power) key doesn't work.
Suggestions? HELP?
We can get into root console and manually tweak files if that will help.
UPDATE----SOLUTION
I got this working by reloading the stock t-mobile kernel from http androidspin.com/2010/08/09/how-to-restore-or-recover-your-samsung-vibrant/. This link provided at that site is single file so just use the pda and pit boxes in odin. In desperation I selected re-partion and Phone bootloader update.
I was unable to get into the recovery console with hitting any keys but adb did the trick. Volumn-up and power gets into the flash download
Finally Fixed it
I finally was able to get the phone into download mode by holding down the volume up key, the search key and the power key.
It seems the key mapping was just messed up.
After it entered download mode I followed the guide on androidspin /2010/08/09/ how-to-restore-or-recover-your-samsung-vibrant (add the .com to androidspin, forum won't let me post links yet)
Hi How did you hold the search key. It does not light up till the vibrant shows on screen. Can you please explain how to managed to hold vol up, power and search together? thanks
Sivaavis its only a 3-button combo, not 4. Why u holding down search? Its up,down volume and power and then when the vibrant logo shows u let go of power.
Sent from my SGH-T959 using XDA Premium App
If you are in recovery mode just go into adb and type in:
adb reboot download
You should be in download mode
SO i installed android on my friends touchpad. Every went off without a hitch. I rebooted into recovery to flash a new rom and without thinking, i forgot that His home button isnt working. SO now im in recovery and i cant get out. I can only move up and down. The power button only goes back so i cant use it to choose "reboot"
ANy suggestion on getting this thing out of recovery?
Tama
wait for the battery to die?
Plug it into ur PC .. and do adb shell reboot
Sent from my Touchpad using xda premium
I just let the battery die on it. Got it back on.
Its kind if useless at some points. Like i cant use the dual boot option to pick an OS cause i cant press enter.
If almost the power button was set as an enter button then we would be in business.
Thanks for the tip guys.
PS: I couldnt use the ADB command as it wouldnt pick up the device when i inquired for devices.
Tama
I never liked opening my cover because it felt like it would get looser, so I saw this trick to get into bootloader mode (required to unlock or flash RUUs, etc) even on a total stock ROM (unrooted and locked).
1. make sure you have all the appropriate drivers and adb/fastboot files
2. turn on usb debug mode and connect usb cable to computer
3. then on the windows command prompt, type:
adb shell reboot bootloader
and there you go!
credits:
http://android-dls.com/wiki/index.php?title=Magic_Rooting
It is a lot easier to just use QuickBoot...
Push a button on the phone and you can Reboot, Boot to Recovery, Boot to bootloader, power off or hot boot. No battery pull, removing the cover or using a computer needed.
For a rooted phone of course. It is one of the first apps I load after rooting.
...I just hold power button and wait for the menu, then select Restart and then you can choose Recovery, Bootloader, Hot Restart, etc.
---------- Post added at 08:22 AM ---------- Previous post was at 08:22 AM ----------
krelvinaz said:
It is a lot easier to just use QuickBoot...
Push a button on the phone and you can Reboot, Boot to Recovery, Boot to bootloader, power off or hot boot. No battery pull, removing the cover or using a computer needed.
For a rooted phone of course. It is one of the first apps I load after rooting.
Click to expand...
Click to collapse
Almost every ROM I've used has it installed by default now apparently. Which is a good thing!
You don't even need to shell. Just adb reboot bootloader. I almost always do it that way because I push the boot.img in fastboot, so I'm plugged in anyway.
You don't need to take the back off. You don't need to hook it to a computer. You don't need to install a special app.
Simply power off, then hold Volume Down when powering back up.
Just make sure Settings/Power/Fast Boot is turned off before you do.
mike.s said:
You don't need to take the back off. You don't need to hook it to a computer. You don't need to install a special app.
Simply power off, then hold Volume Down when powering back up.
Just make sure Settings/Power/Fast Boot is turned off before you do.
Click to expand...
Click to collapse
x100 that is the best way.
lol yea thats what i used too^
mike.s said:
You don't need to take the back off. You don't need to hook it to a computer. You don't need to install a special app.
Simply power off, then hold Volume Down when powering back up.
Just make sure Settings/Power/Fast Boot is turned off before you do.
Click to expand...
Click to collapse
ahh..i've used moto before (very easy to go into BL-just as you describe) but new to htc and didn't realize that was reason i couldn't just go into bootloader. thanks!
mike.s said:
You don't need to take the back off. You don't need to hook it to a computer. You don't need to install a special app.
Simply power off, then hold Volume Down when powering back up.
Just make sure Settings/Power/Fast Boot is turned off before you do.
Click to expand...
Click to collapse
I like having fastboot on, so I use restart from the menu (it is always a full restart, not just shell) and then hold power and volume down when the button back lights go out. The lights off mean its starting to load the boot loader.
Works every time.
Sent from my ADR6425LVW using XDA
please help me with the files
i have a xcoverGTS5690 i want to use odin to return its original rom but i cant find any site with the complete files...that is : pit,bootloader,csc,phone,pda
please som,ebody heeeeeeeelp me please:crying:
I have a fairly generic Chinese tablet, a Neutab N7 (not a Nexus 7), but I have no idea how to enter the bootloader/fastboot mode.
Using adb, "adb reboot bootloader" or "adb reboot-bootloader" just makes it reboot normally.
From a shell, doing "su reboot bootloader" also reboots normally.
I tried Quick Boot from Google Play which has an option to reboot into the bootloader, but it also just ends up rebooting normally.
While powered off, I tried holding power and volume up, power and volume down, and power and both volume up and down, but they all just boot normally.
Doing "adb reboot recovery" does boot me into recovery mode, but the menu doesn't have a bootloader/fastboot option.
Does anyone have any idea how to enter the bootloader/fastboot mode for this tablet? Any help would be appreciated.
knismaps said:
I have a fairly generic Chinese tablet, a Neutab N7 (not a Nexus 7), but I have no idea how to enter the bootloader/fastboot mode.
Using adb, "adb reboot bootloader" or "adb reboot-bootloader" just makes it reboot normally.
From a shell, doing "su reboot bootloader" also reboots normally.
I tried Quick Boot from Google Play which has an option to reboot into the bootloader, but it also just ends up rebooting normally.
While powered off, I tried holding power and volume up, power and volume down, and power and both volume up and down, but they all just boot normally.
Doing "adb reboot recovery" does boot me into recovery mode, but the menu doesn't have a bootloader/fastboot option.
Does anyone have any idea how to enter the bootloader/fastboot mode for this tablet? Any help would be appreciated.
Click to expand...
Click to collapse
why do you want to enter the bootloader? and have they made any roms or cwm recovery for these types of generic android tablets?
[RESOLVED] finally, ROOT for Neutab N7 pro tablet.
knismaps said:
I have a fairly generic Chinese tablet, a Neutab N7 (not a Nexus 7), but I have no idea how to enter the bootloader/fastboot mode.
Using adb, "adb reboot bootloader" or "adb reboot-bootloader" just makes it reboot normally.
From a shell, doing "su reboot bootloader" also reboots normally.
I tried Quick Boot from Google Play which has an option to reboot into the bootloader, but it also just ends up rebooting normally.
While powered off, I tried holding power and volume up, power and volume down, and power and both volume up and down, but they all just boot normally.
Doing "adb reboot recovery" does boot me into recovery mode, but the menu doesn't have a bootloader/fastboot option.
Does anyone have any idea how to enter the bootloader/fastboot mode for this tablet? Any help would be appreciated.
Click to expand...
Click to collapse
Having been looking for this information myself i'm sharing real quick here what i've found. Scouring the net all over i've found NOTHING specific for these Chinese tablets but after finally getting on the scent of VROOT I downloaded and tried iROOT essentially a one-click rooter the .APK **DID NOT WORK** but the PC version **DID** can be found by googling iroot or vroot.
RE: bootloader, i've still found no way or any good info on entering the bootloader AFAIK this is locked and may not be possible without some good hard hacking on the firmware, I DO KNOW that if you try entering the "bootloader" with a reboot manager on the device u will find yourself at the "NeuTab" welcome screen and stuck. Fortunately at least in my experience, letting the tablet battery run down low you can boot back into it and root condition is still good.
Hope this helps somewhat I know its an old post but a lot of people have been looking for this info have yet to post on authors site confirming that the NeuTab also works with his software.
peace.
VE3UND
BTW I forgot to mention the site and the software (ALTHOUGH IT STATES OTHERWISE) is in Chinese. A leap of faith needed there I know but i confirm this method works. l8z
BTW^2 ALSO the android version was KitKat as received from the mfg, also have been told that Jellybean will install on the tablet after rooting and maybe is now included with device but don't quote me on that.
all in all a really nice tab for the price, especially now we have root biggest missing option: GPS but you can tether to another device with gps if you need to. Also no built in USB HOST MODE. //out
I've got the NeuTab N10 and can't get ADB to see it at all. How did you get ADB to work with your N7, were you able to find NeuTab ADB drivers somewhere?
So i recently came across this tablet in my stuff... something i picked up for the wife a few years back.
I also came across this website.... http://neutab.com/info-detail.php?InfoId=11
It has all the tools and programs that the company uses. includes all files for development of their entire line of tablets.
Thought this may be useful. just click on the link that says pheonixtools.zip and it will take you to a back end file server... This tablet is about as open sourced as it gets... so... this leads me to ask a question i have been struggling with for the last 2 years of being a member on this website...
can anyone... please... help me develop my first recovery and custom rom for this tablet? I just have never done it all the way... i have set up a couple things here and there... figured out how to strip the stock recovery and boot... but never got further than that.
Thanks for the help.
• Unzip phoenix tool.zip you just downloaded; (to open a .zip file, download WinRAR)
• In the folder of phoenix tool you just unzipped, depending on your system specs, select "drvinstaller_X64", "drvinstaller_x86" or "drvinstaller_IA64" to install tablet driver; Or you can run all three driver installer and at least one will work;
• Run "PhoenixSuit.exe", select "firmware" tab;
• Click on "Image" button, choose the firmware you just downloaded;
• Turn your tablet completely off (by press and hold power button for 20 seconds), press and hold "volume -" button, connect tablet to computer via usb cable, keep volume button held, press power button 10 times repeatedly；
• The phoenix tool should recognize the tablet. On pop-up dialog window, select if you want to format and wipe out everything on your tablet；
• The phoenix tool will start flash the firmware to the tablet. Wait till it is done；
• When upgrade is finished, disconnect your tablet from computer, press and hold power button for 10 seconds to quit upgrade mode. then press and hold power button for 2-4 seconds to turn tablet on；
Congratulations! Your tablet is now refreshed.
Ok so I have a NueTab Air 7 Android and I have talked toto their customer support which did neurologist absolutely no good. I have been trying to hard reset my tablet and do a factory reset by holding down the volume up and down keys and the power keys until it gives me the option of rebooting. However, there is no option for a factory reset. Only a Recovery mode, Fastboot mode, and Normal mode. I tired the Normal and Recovery an both sent me back to enter password that I can't rremember, which isthe why I'm resetting it lol. Finally I chose the Fastboot option and now it is stuck on that option and has been for almost an hour. It willwas not let me power off, try to hard reset, it is literally stuck. And it is a hundred percent charged. I do jot hav the optiontime to connectbe the tablet to acall Windows computer at this timetime, as the forums I have read say can possibly fix the issue. And what a surprise the customer service phone number for this specific tablet does not know how to fix it!!!!! Not surprised at all. If anyone at allthe has any ideas or knows what to do or howsomething to fix it please help meme. I'm very frustrated to say thethat least and in desperate need of help. Anything would be immensely appreciated. ~Melissa
How to identify the exact firmware of the N7 after this page (Oficial NEUTAB), I have 3 options but that IMEI series is nowhere in the table.
---------- Post added at 11:35 PM ---------- Previous post was at 11:35 PM ----------
this page http://neutab.com/info-detail.php?InfoId=11
n7s root
therealtaynak said:
So i recently came across this tablet in my stuff... something i picked up for the wife a few years back.
I also came across this website.... http://neutab.com/info-detail.php?InfoId=11
It has all the tools and programs that the company uses. includes all files for development of their entire line of tablets.
Thought this may be useful. just click on the link that says pheonixtools.zip and it will take you to a back end file server... This tablet is about as open sourced as it gets... so... this leads me to ask a question i have been struggling with for the last 2 years of being a member on this website...
can anyone... please... help me develop my first recovery and custom rom for this tablet? I just have never done it all the way... i have set up a couple things here and there... figured out how to strip the stock recovery and boot... but never got further than that.
Thanks for the help.
Click to expand...
Click to collapse
I would love to root this tablet purely because it's my daughter's and some of the games she likes has some real funky permissions That they want! A custom rom would be nice but I will be satisfied with being able to revoke some of the permissions that the apps want to have access to.
n7s software download issue
therealtaynak said:
• Unzip phoenix tool.zip you just downloaded; (to open a .zip file, download WinRAR)
• In the folder of phoenix tool you just unzipped, depending on your system specs, select "drvinstaller_X64", "drvinstaller_x86" or "drvinstaller_IA64" to install tablet driver; Or you can run all three driver installer and at least one will work;
• Run "PhoenixSuit.exe", select "firmware" tab;
• Click on "Image" button, choose the firmware you just downloaded;
• Turn your tablet completely off (by press and hold power button for 20 seconds), press and hold "volume -" button, connect tablet to computer via usb cable, keep volume button held, press power button 10 times repeatedly；
• The phoenix tool should recognize the tablet. On pop-up dialog window, select if you want to format and wipe out everything on your tablet；
• The phoenix tool will start flash the firmware to the tablet. Wait till it is done；
• When upgrade is finished, disconnect your tablet from computer, press and hold power button for 10 seconds to quit upgrade mode. then press and hold power button for 2-4 seconds to turn tablet on；
Congratulations! Your tablet is now refreshed.
Click to expand...
Click to collapse
I have yet to be able to download the zip or the firmware software. i got root with kingo pc version but that's pretty much it and I can't change the route manager because once I delete that then I don't have root anymore and can't add another one. Also I have yet to been able to get into or see download mode on this either. It just stays on the screen with the name on it and that's pretty much it. no bootloader unlock either