Related
okay guys I need your help here, my power button is not working at all i can not turn screen off or on and i can not power off so i called up verizon they are sending me out a new phone and i have to send back old one only thing is i forgot no warranty once i am rooted not a big deal i will just go back to stock.......so i download (Mecha_VERIZON_WWE_1.12.605.6_Radio_1.16.00.0223r_N V_8k_1.41_9k_1.64_release) rename it put it on sd card do adb reboot bootloader......now this is were i need the help it is on fastboot i push the volume button down to go to bootloader but i need to hit the power button and its not working so now i am lost is there another way to bootloader or another way for me to do this with out needing the power button???
Boot and before the screen turns off disable fastboot in development.
Then adb reboot bootloader
thanks I had fast boot turned off and i double checked, side note it was under power not development. anyhow still no luck i checked it then unchecked it to be on safe side but i still do adb reboot bootloader with the file on root of sd card and its still in fastboot usb.......now that i think of it i guess i should have put that in post. anyhow it says hit power key to select item but i cant push power key
Out of curiousity, with fastboot disabled does typing "reboot bootloader" in terminal on the phone while the phone is NOT plugged into your computer still load fastboot?
good idea, I dont know....but i am going to find out right now.
that was a good idea i did not think of it but it did not work still in fastboot usb and i did take off usb before i did it
is there anyway to push the files with just adb
i got it to work!!! i used a small sewing needle and pushed the power button with that lol
I've got an MSI Windpad Enjoy 10" Plus (http://www.msi.com/product/windpad/Enjoy-10-Plus.html) and I tried to flash it this ROM (http://forum.xda-developers.com/showthread.php?t=1540616).
The rom is for MSI Windpad Enjoy 10", while mine is called Enjoy 10" Plus. So GG, I think I got owned. So retarded you don't even have to tell me.
Now whenever I try to turn on the tablet, it would simply vibrate, show the logo and then turns off. PC doesn't detect it.
However, I tried holding Power button + Reset button together, the PC detects it, but it's unknown and it can't identify it (even though I have MSI's drivers installed and all).
...Any ideas on how to overcome it?
I'm going to sleep now, and will check tomorrow. Thanks in advance.
[UPDATE] 2/22/2013 11:00pm gmt
I'm able to boot it only if I have it plugged in. I can only use Power + Volume controllers + Reset buttons. I can enter Recovery Mode but I cannot confirm/click on any selection.
Tablet does not get recognized by the computer in "Flashing Mode".
I forced to install the driver for the "Flashing mode" when the tablet is in recovery mode but programs like MSIFlashtool, RKBatchTool, RKAdnroid. (not sure if i correcly used the last 2... but whatever)
spilot said:
I've got an MSI Windpad Enjoy 10" Plus (http://www.msi.com/product/windpad/Enjoy-10-Plus.html) and I tried to flash it this ROM (http://forum.xda-developers.com/showthread.php?t=1540616).
The rom is for MSI Windpad Enjoy 10", while mine is called Enjoy 10" Plus. So GG, I think I got owned. So retarded you don't even have to tell me.
Now whenever I try to turn on the tablet, it would simply vibrate, show the logo and then turns off. PC doesn't detect it.
However, I tried holding Power button + Reset button together, the PC detects it, but it's unknown and it can't identify it (even though I have MSI's drivers installed and all).
...Any ideas on how to overcome it?
I'm going to sleep now, and will check tomorrow. Thanks in advance.
Click to expand...
Click to collapse
i dont think that that is called brick
anyways go download Odin and the stock image for your phone (in tar format)(just search on XDA)
put phone into download mode nd open odin
select PDA and select the tar file u downloaded
click start and it should take u back to stock
forgot if this unroots ur phone or not so u might have to root again.
Jack Jake said:
i dont think that that is called brick
anyways go download Odin and the stock image for your phone (in tar format)(just search on XDA)
put phone into download mode nd open odin
select PDA and select the tar file u downloaded
click start and it should take u back to stock
forgot if this unroots ur phone or not so u might have to root again.
Click to expand...
Click to collapse
This is not Samsung or a phone. Read what you are told
If you have a splash screen, you are not bricked. Does adb recognise your tablet? Can you access any recovery/download mode?
Sent from my ARCHOS 80G9 using Tapatalk HD
Quinny899 said:
This is not Samsung or a phone. Read what you are told
If you have a splash screen, you are not bricked. Does adb recognise your tablet? Can you access any recovery/download mode?
Click to expand...
Click to collapse
ADB doesn't recognize it. I tried holding Power + Reset button and did 'adb devices' on Ubuntu and it didn't show anything. On Windows, if I held these 2 buttons, it would show an unknown device in Device Manager. (Mind you, I don't have the Android SDK on Windows, just Linux.)
I can't access any recovery/download mode. Any combination of buttons (Power+VolDown, Power+VolUp/VolDown, Power+VolUP, Power+Home, Power+Back, Power+Settings) would do nothing.
-----------------------------------------------------------------------------------------------------
This what it does when I press Power + Reset Button with a needle. It boots up, splash screen, and stays on black screen (Btw, in this stage, it's Unknown Device in Windows Manager).Once I let go of Reset or Power button, it shuts down.
Turning it on without holding Reset, it would show splash screen, black screen and turns off in about 2 seconds.
Bump.
I've tried playing with it for some time. I can't get it to stay working without pressing power+reset buttons, it always shuts off...
Go to the device website, and download section, get the latest firmware and forget to download the flash driver.
Follow the steps that in firmware folder after unzip it, and you'll get your tablet on
Sent from my Enjoy 10 Plus using xda app-developers app
mramzi said:
Go to the device website, and download section, get the latest firmware and forget to download the flash driver.
Follow the steps that in firmware folder after unzip it, and you'll get your tablet on
Click to expand...
Click to collapse
... I was trying all the time to get it work on the PC without plugging the charger. Anyways~
(Tablet's turned off), I plugged charger, I plugged USB, I turned on the tablet and viola it actually worked and booted into OS. However, no buttons work AT ALL, and touch input doesn't work as well.
I tried to get into Recovery Mode and it worked, but I can go up/down using VolUp/VolDow buttons but I cannot click on any thing because the home button don't work nor any other.
Only Power + VolUp + VolDown + Reset buttons work... What to do now?
TL;DR I want to click on 'Update from SD Card' from the Android Recovery but I couldn't get the 'home' button to click enter on the selection. So what's the solution?
bump.
updates:
I tried to place the firmware from the official website as update.img on an SD Card and placed it in the tablet and went into the recovery mode and selected the 'update from sd card' but i couldn't click it. I tried to tap power, home, search, settings and back and nothing worked.
what I've got up until now:
I can boot into the ROM / RecoveryMod as long as I have the charger plugged in the tablet.
For Ubuntu, when I use the command $ tail -f /var/log/syslog and plug in my tablet, it shows this log http://pastebin.com/pBpBUA2Q (it identifies the tablet) [note, the tablet is booted into the ROM]
Also, if I'm in the recovery mode and I plug in the tablet, it would enumerate the USB... ~,~
Bump
bump
spilot said:
bump
Click to expand...
Click to collapse
Please don't bump your thread more than once in 24 hours, it's against the rules
Sent from my Galaxy Nexus using Tapatalk HD
bump
Hello,
I know it has been long since this thread stopped.
I'm currently in his shoes and for the life of me cannot find anything on the web to help me solve my problem.
My MSI Enjoy 10" Plus was flashed with the wrong MSI Enjoy 10" update. Now the tablet only turns on when in "Recovery Mode", but selecting in that mode is not possible using 10" Plus' buttons. Is there anyone from you good people that can help? Please? Thanks.
Uhm...bump?
Bump? Need help from the experts here. Please. I'm desperate.
Thank you very much in advance.
I have a fairly generic Chinese tablet, a Neutab N7 (not a Nexus 7), but I have no idea how to enter the bootloader/fastboot mode.
Using adb, "adb reboot bootloader" or "adb reboot-bootloader" just makes it reboot normally.
From a shell, doing "su reboot bootloader" also reboots normally.
I tried Quick Boot from Google Play which has an option to reboot into the bootloader, but it also just ends up rebooting normally.
While powered off, I tried holding power and volume up, power and volume down, and power and both volume up and down, but they all just boot normally.
Doing "adb reboot recovery" does boot me into recovery mode, but the menu doesn't have a bootloader/fastboot option.
Does anyone have any idea how to enter the bootloader/fastboot mode for this tablet? Any help would be appreciated.
knismaps said:
I have a fairly generic Chinese tablet, a Neutab N7 (not a Nexus 7), but I have no idea how to enter the bootloader/fastboot mode.
Using adb, "adb reboot bootloader" or "adb reboot-bootloader" just makes it reboot normally.
From a shell, doing "su reboot bootloader" also reboots normally.
I tried Quick Boot from Google Play which has an option to reboot into the bootloader, but it also just ends up rebooting normally.
While powered off, I tried holding power and volume up, power and volume down, and power and both volume up and down, but they all just boot normally.
Doing "adb reboot recovery" does boot me into recovery mode, but the menu doesn't have a bootloader/fastboot option.
Does anyone have any idea how to enter the bootloader/fastboot mode for this tablet? Any help would be appreciated.
Click to expand...
Click to collapse
why do you want to enter the bootloader? and have they made any roms or cwm recovery for these types of generic android tablets?
[RESOLVED] finally, ROOT for Neutab N7 pro tablet.
knismaps said:
I have a fairly generic Chinese tablet, a Neutab N7 (not a Nexus 7), but I have no idea how to enter the bootloader/fastboot mode.
Using adb, "adb reboot bootloader" or "adb reboot-bootloader" just makes it reboot normally.
From a shell, doing "su reboot bootloader" also reboots normally.
I tried Quick Boot from Google Play which has an option to reboot into the bootloader, but it also just ends up rebooting normally.
While powered off, I tried holding power and volume up, power and volume down, and power and both volume up and down, but they all just boot normally.
Doing "adb reboot recovery" does boot me into recovery mode, but the menu doesn't have a bootloader/fastboot option.
Does anyone have any idea how to enter the bootloader/fastboot mode for this tablet? Any help would be appreciated.
Click to expand...
Click to collapse
Having been looking for this information myself i'm sharing real quick here what i've found. Scouring the net all over i've found NOTHING specific for these Chinese tablets but after finally getting on the scent of VROOT I downloaded and tried iROOT essentially a one-click rooter the .APK **DID NOT WORK** but the PC version **DID** can be found by googling iroot or vroot.
RE: bootloader, i've still found no way or any good info on entering the bootloader AFAIK this is locked and may not be possible without some good hard hacking on the firmware, I DO KNOW that if you try entering the "bootloader" with a reboot manager on the device u will find yourself at the "NeuTab" welcome screen and stuck. Fortunately at least in my experience, letting the tablet battery run down low you can boot back into it and root condition is still good.
Hope this helps somewhat I know its an old post but a lot of people have been looking for this info have yet to post on authors site confirming that the NeuTab also works with his software.
peace.
VE3UND
BTW I forgot to mention the site and the software (ALTHOUGH IT STATES OTHERWISE) is in Chinese. A leap of faith needed there I know but i confirm this method works. l8z
BTW^2 ALSO the android version was KitKat as received from the mfg, also have been told that Jellybean will install on the tablet after rooting and maybe is now included with device but don't quote me on that.
all in all a really nice tab for the price, especially now we have root biggest missing option: GPS but you can tether to another device with gps if you need to. Also no built in USB HOST MODE. //out
I've got the NeuTab N10 and can't get ADB to see it at all. How did you get ADB to work with your N7, were you able to find NeuTab ADB drivers somewhere?
So i recently came across this tablet in my stuff... something i picked up for the wife a few years back.
I also came across this website.... http://neutab.com/info-detail.php?InfoId=11
It has all the tools and programs that the company uses. includes all files for development of their entire line of tablets.
Thought this may be useful. just click on the link that says pheonixtools.zip and it will take you to a back end file server... This tablet is about as open sourced as it gets... so... this leads me to ask a question i have been struggling with for the last 2 years of being a member on this website...
can anyone... please... help me develop my first recovery and custom rom for this tablet? I just have never done it all the way... i have set up a couple things here and there... figured out how to strip the stock recovery and boot... but never got further than that.
Thanks for the help.
• Unzip phoenix tool.zip you just downloaded; (to open a .zip file, download WinRAR)
• In the folder of phoenix tool you just unzipped, depending on your system specs, select "drvinstaller_X64", "drvinstaller_x86" or "drvinstaller_IA64" to install tablet driver; Or you can run all three driver installer and at least one will work;
• Run "PhoenixSuit.exe", select "firmware" tab;
• Click on "Image" button, choose the firmware you just downloaded;
• Turn your tablet completely off (by press and hold power button for 20 seconds), press and hold "volume -" button, connect tablet to computer via usb cable, keep volume button held, press power button 10 times repeatedly；
• The phoenix tool should recognize the tablet. On pop-up dialog window, select if you want to format and wipe out everything on your tablet；
• The phoenix tool will start flash the firmware to the tablet. Wait till it is done；
• When upgrade is finished, disconnect your tablet from computer, press and hold power button for 10 seconds to quit upgrade mode. then press and hold power button for 2-4 seconds to turn tablet on；
Congratulations! Your tablet is now refreshed.
Ok so I have a NueTab Air 7 Android and I have talked toto their customer support which did neurologist absolutely no good. I have been trying to hard reset my tablet and do a factory reset by holding down the volume up and down keys and the power keys until it gives me the option of rebooting. However, there is no option for a factory reset. Only a Recovery mode, Fastboot mode, and Normal mode. I tired the Normal and Recovery an both sent me back to enter password that I can't rremember, which isthe why I'm resetting it lol. Finally I chose the Fastboot option and now it is stuck on that option and has been for almost an hour. It willwas not let me power off, try to hard reset, it is literally stuck. And it is a hundred percent charged. I do jot hav the optiontime to connectbe the tablet to acall Windows computer at this timetime, as the forums I have read say can possibly fix the issue. And what a surprise the customer service phone number for this specific tablet does not know how to fix it!!!!! Not surprised at all. If anyone at allthe has any ideas or knows what to do or howsomething to fix it please help meme. I'm very frustrated to say thethat least and in desperate need of help. Anything would be immensely appreciated. ~Melissa
How to identify the exact firmware of the N7 after this page (Oficial NEUTAB), I have 3 options but that IMEI series is nowhere in the table.
---------- Post added at 11:35 PM ---------- Previous post was at 11:35 PM ----------
this page http://neutab.com/info-detail.php?InfoId=11
n7s root
therealtaynak said:
So i recently came across this tablet in my stuff... something i picked up for the wife a few years back.
I also came across this website.... http://neutab.com/info-detail.php?InfoId=11
It has all the tools and programs that the company uses. includes all files for development of their entire line of tablets.
Thought this may be useful. just click on the link that says pheonixtools.zip and it will take you to a back end file server... This tablet is about as open sourced as it gets... so... this leads me to ask a question i have been struggling with for the last 2 years of being a member on this website...
can anyone... please... help me develop my first recovery and custom rom for this tablet? I just have never done it all the way... i have set up a couple things here and there... figured out how to strip the stock recovery and boot... but never got further than that.
Thanks for the help.
Click to expand...
Click to collapse
I would love to root this tablet purely because it's my daughter's and some of the games she likes has some real funky permissions That they want! A custom rom would be nice but I will be satisfied with being able to revoke some of the permissions that the apps want to have access to.
n7s software download issue
therealtaynak said:
• Unzip phoenix tool.zip you just downloaded; (to open a .zip file, download WinRAR)
• In the folder of phoenix tool you just unzipped, depending on your system specs, select "drvinstaller_X64", "drvinstaller_x86" or "drvinstaller_IA64" to install tablet driver; Or you can run all three driver installer and at least one will work;
• Run "PhoenixSuit.exe", select "firmware" tab;
• Click on "Image" button, choose the firmware you just downloaded;
• Turn your tablet completely off (by press and hold power button for 20 seconds), press and hold "volume -" button, connect tablet to computer via usb cable, keep volume button held, press power button 10 times repeatedly；
• The phoenix tool should recognize the tablet. On pop-up dialog window, select if you want to format and wipe out everything on your tablet；
• The phoenix tool will start flash the firmware to the tablet. Wait till it is done；
• When upgrade is finished, disconnect your tablet from computer, press and hold power button for 10 seconds to quit upgrade mode. then press and hold power button for 2-4 seconds to turn tablet on；
Congratulations! Your tablet is now refreshed.
Click to expand...
Click to collapse
I have yet to be able to download the zip or the firmware software. i got root with kingo pc version but that's pretty much it and I can't change the route manager because once I delete that then I don't have root anymore and can't add another one. Also I have yet to been able to get into or see download mode on this either. It just stays on the screen with the name on it and that's pretty much it. no bootloader unlock either
i soft bricked my phone when installing the cyanangen 12 rom, it quit during the setup wizzard. The button combination of down and power release when seeing lg and repressing is not working. PleASE TELL ME i can enter twrp without having to restore my phone to stock. The phone will receive phone calls but that is all it does. otherwise it says setup wizzard quit and endlessly says this when you press ok. please help, despite being in los angeles, i have not found anybody capable of helping me.
Patrick--in so much need...
What is the repressing step? I've never heard of that. Isn't it just vol down and power, then release power while still holding vol down until recovery boots?
Also, do you have adb or fastboot installed on a pc? If so, adb reboot recovery from CMD if in android, or fastboot reboot recovery if in bootloader. Have you tried those?
patrick73csun said:
i soft bricked my phone when installing the cyanangen 12 rom, it quit during the setup wizzard. The button combination of down and power release when seeing lg and repressing is not working. PleASE TELL ME i can enter twrp without having to restore my phone to stock. The phone will receive phone calls but that is all it does. otherwise it says setup wizzard quit and endlessly says this when you press ok. please help, despite being in los angeles, i have not found anybody capable of helping me.
Patrick--in so much need...
Click to expand...
Click to collapse
You don't have to release the buttons, idk why so many people keep saying this. Should be the same as mine.. With the phone off just hold both power and volume down until you see it say Recovery Mode loading, then release. If that doesn't work then try the adb command while plugged in to your computer.
Barshalen said:
You don't have to release the buttons, idk why so many people keep saying this. Should be the same as mine.. With the phone off just hold both power and volume down until you see it say Recovery Mode loading, then release. If that doesn't work then try the adb command while plugged in to your computer.
Click to expand...
Click to collapse
Yup. Thats the same thing i was wondering. I had to use it last night. Just hold both. Easy.
Sent from rotary technology Phone
"Also, do you have adb or fastboot installed on a pc? If so, adb reboot recovery from CMD if in android, or fastboot reboot recovery if in bootloader. Have you tried those? "-----------
How do you get into bootloader if phone is bricked? It sees the phone, but it won't open up and let me look inside? Thank you
A window comes up and says that the kernal cracked.. My phone is having a hard time getting charged, could this be related?
I have one of these tabs, which will no longer boot up.
I flashed a ROM which clearly will not work on this device..... It switches on and I am now stuck on a screen that looks like the Android man playing in a shower........
I cannot get it to go past this, and I cant get it into bootloader/download mode..... If I hold the Vol button and press and hold power it simply loads to this screen...... I have tried any and every button combination with the same result...
ADB sees the pad when connected to the PC but I am stuck where to go from here. I don't know enough about ADB to try and fix this, if its even possible. The fact I cannot get into recovery means I cannot even put a zip file on the sdcard...... Is there a way to force a flash using only ADB?
Can anyone help me please........