Versus Touchtab 7.0 - Android Q&A, Help & Troubleshooting

I have one of these tabs, which will no longer boot up.
I flashed a ROM which clearly will not work on this device..... It switches on and I am now stuck on a screen that looks like the Android man playing in a shower........
I cannot get it to go past this, and I cant get it into bootloader/download mode..... If I hold the Vol button and press and hold power it simply loads to this screen...... I have tried any and every button combination with the same result...
ADB sees the pad when connected to the PC but I am stuck where to go from here. I don't know enough about ADB to try and fix this, if its even possible. The fact I cannot get into recovery means I cannot even put a zip file on the sdcard...... Is there a way to force a flash using only ADB?
Can anyone help me please........

Related

[Q] Worthless Vibrant

Well, after spending almost 11 hours trying to boot into recovery or download, I know for sure that there is something going on with my phone re: hardware locked. The date on my box is 7-16. It is an early Vibrant. But no matter what I do, I cannot get into download or recovery which means my ****ing phone is literally worthless.
I have tried all possible thousands of combination's of buttons, batteries, and cords while booting and nothing happens.
The Vibrant logo shows, then it shows the pink, annoying as hell T-mobile logo, than goes to the Galaxy S logo which loads for a little bit and then just leads me to a black screen. Eventually the 4 buttons on the front of the phone turn on and then nothing else happens. It will just sit like this forever.
I know all I need to do is get a working ROM loaded but it is literally impossible to do so.
Can anyone offer any suggestions? Or are anyone else having the same problem?
I guess the only way I can get a working phone is to get in touch with T-mobile and do a Warranty exchange. That's a damn shame too, because I will be without a working phone for a week.
What about using adb?
adb reboot recovery -or- adb reboot download ?
I had a hw locked vibrant, never tried the adb reboot download, recovery did work.. I added another line on my account last night for somone, who got a vibrant, theirs wasn't hw locked, so I traded 'em ;P
Agree with the above poster I have been stuck on the vibrant screen or dark screen and adb still worked to save me
when i try to use adb, it just tells me that it cant find the device. i'm not able to boot into android OS at all.... screen just hangs. so my computer is never getting a chance to see my phone hence why i cant use adb to reboot it into recovery or download.
I believe your device has to go into recovery mode then check with and devices and if you see a device I THINK it is and reboot download, I am 90% certain
Sent from my SGH-T959 using Tapatalk
have you installed the drivers? phone DOES NOT have to boot into android for adb to read it.
98classic said:
have you installed the drivers? phone DOES NOT have to boot into android for adb to read it.
Click to expand...
Click to collapse
i do believe i have the correct drivers installed. i was able to use adb to run lagfixes before i was having this problem. when i boot my phone, i get a sound from my computer saying that it recognizes a usb device. the two drives in the vibrant show up in My Computer but i cannot access them as windows says they are not accessable at the moment.
at what point will adb be able to recognize my phone when booting? no matter what i do when i try adb shell i get error: device not found
It could be the phone not bring in debugging mode, either because it's been turned off or the os isn't getting far enough to turn it on. I think I've been able to get adb to recognize my phone even while it was booting up (at the white vibrant screen). Maybe you can try adb then?
Same problem here. I probably just have to sell it fast on ebay or something. Hopefully some kind of fix starts by the end of the week. First phone in my smartphone life to brick from a simple Voodoo lag fix. Please XDA gods find a solution.
crazycaveman said:
It could be the phone not bring in debugging mode, either because it's been turned off or the os isn't getting far enough to turn it on. I think I've been able to get adb to recognize my phone even while it was booting up (at the white vibrant screen). Maybe you can try adb then?
Click to expand...
Click to collapse
nope, no go. adb will not recognize my device no matter what. and the device isnt loading the OS so i cannot turn debugging on. i guess this is a real "brick" then.
This sounds like a rant rather than a question. Just sayin'.
DKYang said:
This sounds like a rant rather than a question. Just sayin'.
Click to expand...
Click to collapse
fixed that. my bad.
Check my thread in the dev section... I can get ADB working when you are stuck at the vibrant screen... MIGHT... just might work in your situation...
My thread is probably fallen back a few pages now... its a [Guide] [Think Tank]
renocivik said:
Check my thread in the dev section... I can get ADB working when you are stuck at the vibrant screen... MIGHT... just might work in your situation...
My thread is probably fallen back a few pages now... its a [Guide] [Think Tank]
Click to expand...
Click to collapse
thanks for the suggestion. i found your thread and went through the steps in the OP... still no luck. no matter what i do, i cannot get passed the black screen the loads after the galaxy s logo. i also cannot get into download mode or recovery no matter what combination of button presses i use.
just do the following , i used to have the problem of going into the download mode and this is what realy worked to me :
1- turn off the phone.
2- plug in the USB cable.
3- wait until the battery green charging start.
4- press the vol + , vol - , the power botton together.
5- when the screen gose black release the power botton only.
you should now be in the downloading mode
core99 said:
just do the following , i used to have the problem of going into the download mode and this is what realy worked to me :
1- turn off the phone.
2- plug in the USB cable.
3- wait until the battery green charging start.
4- press the vol + , vol - , the power botton together.
5- when the screen gose black release the power botton only.
you should now be in the downloading mode
Click to expand...
Click to collapse
this isnt working either. :-(
I just fixed this on my phone. Your phone will go into download mode. Plug the phone in and wait for the battery symbol to fully load. Hold Vol + and _ and PWR until it goes black, then release the PWR button only. It will go into DL mode. Fire up Odin, and flash the "Froyo that does not brick" ROM. It will boot into the i9000 recovery mode and give you an error. Hold the Vol + and - and PWR again and release PWR when the phone goes black. It will go into DL mode again. Now with Odin, flash the factory firmware, making sure to click re-partition this time. After the phone reboots, it will fire right up into the factory ROM.
atoz350 said:
I just fixed this on my phone. Your phone will go into download mode. Plug the phone in and wait for the battery symbol to fully load. Hold Vol + and _ and PWR until it goes black, then release the PWR button only. It will go into DL mode. Fire up Odin, and flash the "Froyo that does not brick" ROM. It will boot into the i9000 recovery mode and give you an error. Hold the Vol + and - and PWR again and release PWR when the phone goes black. It will go into DL mode again. Now with Odin, flash the factory firmware, making sure to click re-partition this time. After the phone reboots, it will fire right up into the factory ROM.
Click to expand...
Click to collapse
this is exactly the method i want to try. but unfortunately i cannot get the phone into recovery or download mode. i have tried at least 100 times now with many different combination's of plugging the usb cord in and pressing the volume and power buttons.
two ideas: one, is it possible that i wiped recovery and download mode from my phone on accident? the reason why i ask is that i was super tired and flashing roms and kernels to my phone. i flashed back to my original stock rom and then i flashed the kernel. for some reason, i selected wipe date/cache in Rom Manager before flashing the kernel. i have no idea why i did this. seriously. totally noob move. so im assuming i have a kernel flashed but now there is no ROM installed for the phone to boot into.
two, if above is not the issue, than im going to assume that the phone is not recognizing any button presses while its off, so when i turn it on it just recognizes that the power was pressed and ignores the volume presses, thus not booting the phone into recovery or download.
edit: i should mention again that at no time does adb recognize my device. so i cannot use adb to reboot the phone into the mode i need.
just a comment for the OP - the vibrant isnt worthless, it is something that YOU did to get the phone into its current state. So dont blame the phone for something that it didnt do on its own.
/end rant
byt3b0mb said:
just a comment for the OP - the vibrant isnt worthless, it is something that YOU did to get the phone into its current state. So dont blame the phone for something that it didnt do on its own.
/end rant
Click to expand...
Click to collapse
I understand what you mean. I appreciate your criticism of my original post. Let me say that I wrote it while frustrated. But I know that isn't an excuse.
The device is fantastic. I know that I did this to it myself. It's unfortunate.
Anyways, I received a replacement phone. I will be more careful this time.

Stuck in recovery "No home Button"

SO i installed android on my friends touchpad. Every went off without a hitch. I rebooted into recovery to flash a new rom and without thinking, i forgot that His home button isnt working. SO now im in recovery and i cant get out. I can only move up and down. The power button only goes back so i cant use it to choose "reboot"
ANy suggestion on getting this thing out of recovery?
Tama
wait for the battery to die?
Plug it into ur PC .. and do adb shell reboot
Sent from my Touchpad using xda premium
I just let the battery die on it. Got it back on.
Its kind if useless at some points. Like i cant use the dual boot option to pick an OS cause i cant press enter.
If almost the power button was set as an enter button then we would be in business.
Thanks for the tip guys.
PS: I couldnt use the ADB command as it wouldnt pick up the device when i inquired for devices.
Tama

Flashed Wrong Recovery - CWM and Download mode don't work

I tried to Unroot my Galaxy Tab 10.1 LTE last night and think I may have bricked my tablet. I used the instructions here on the XDA forum which had a link to all the Stock ROM's in one place. I got the most recent one and the only one for USA but it said it was for the model 7510. I didn't think that would be a problem since the USB drivers I installed on my PC were also labeled as being for the 7510 and they worked.
This tablet is the SCH-I905. Now I can't get it to boot at all. Gets stuck in a boot loop. Shows the Samsung logo, then resets and does it again. I can't get it in recovery mode either. Goes to a black screen and hangs.
Using the normal process to get to Download mode doesn't work. Holding Power and Volume Up, then letting go of the Power button, then pressing Volume Down and then Up. That's one weird thing. I can get to the option screen that shows the Download and Recovery mode options. Normally I would hit the Volume Down button to select Download mode and on the screen it says to press Volume Up to continue or Volume Down to cancel. If I press Volume Up it goes to a black screen and hangs. If I press Volume Down I get the Odin Download screen that says Waiting on USB cable.
That screen doesn't look the same as what I normally see but I'm not sure what's different. I didn't memorize each line of text. I just know there's not as much text there as there usually is. My PC will not recognize the tablet no matter which USB port I try to use and the tablet doesn't recognize that the USB cable is plugged in. I had no problem with the USB connection before I flashed the 7510 stock ROM.
So, if I cannot get to recovery mode and I can't get Download mode to work so I can use Odin to flash a different rom then is this thing bricked or is there something else I can try? I am about to try using my laptop and its USB ports but I don't think that's going to make any difference.
BTW, I have since found the correct 'stock recovery rom' at droidbasement.com and downloaded it to my PC. I just need to get on the tablet somehow.
Many people have your problem. I have my Lte verizon bricked as yours. The problem is demaged bootloader, only nvflash can fix it but actually our bootloader is locked and we need a hex key called sbk. At least we have to wait that somebody hack our tab from the basement. For now we can only search and share result.
pickupcash said:
I tried to Unroot my Galaxy Tab 10.1 LTE last night and think I may have bricked my tablet. I used the instructions here on the XDA forum which had a link to all the Stock ROM's in one place. I got the most recent one and the only one for USA but it said it was for the model 7510. I didn't think that would be a problem since the USB drivers I installed on my PC were also labeled as being for the 7510 and they worked.
This tablet is the SCH-I905. Now I can't get it to boot at all. Gets stuck in a boot loop. Shows the Samsung logo, then resets and does it again. I can't get it in recovery mode either. Goes to a black screen and hangs.
Using the normal process to get to Download mode doesn't work. Holding Power and Volume Up, then letting go of the Power button, then pressing Volume Down and then Up. That's one weird thing. I can get to the option screen that shows the Download and Recovery mode options. Normally I would hit the Volume Down button to select Download mode and on the screen it says to press Volume Up to continue or Volume Down to cancel. If I press Volume Up it goes to a black screen and hangs. If I press Volume Down I get the Odin Download screen that says Waiting on USB cable.
That screen doesn't look the same as what I normally see but I'm not sure what's different. I didn't memorize each line of text. I just know there's not as much text there as there usually is. My PC will not recognize the tablet no matter which USB port I try to use and the tablet doesn't recognize that the USB cable is plugged in. I had no problem with the USB connection before I flashed the 7510 stock ROM.
So, if I cannot get to recovery mode and I can't get Download mode to work so I can use Odin to flash a different rom then is this thing bricked or is there something else I can try? I am about to try using my laptop and its USB ports but I don't think that's going to make any difference.
BTW, I have since found the correct 'stock recovery rom' at droidbasement.com and downloaded it to my PC. I just need to get on the tablet somehow.
Click to expand...
Click to collapse
Did you solved the issue?
Please share ..., i face the same problem now ...
regards,
erwien.
Did you solved the issue.
share me......i face the same problem now
.
.
.
.
.
.
.
.
.
.
.
.
help me plz

Bricked my MSI Enjoy 10" Plus

I've got an MSI Windpad Enjoy 10" Plus (http://www.msi.com/product/windpad/Enjoy-10-Plus.html) and I tried to flash it this ROM (http://forum.xda-developers.com/showthread.php?t=1540616).
The rom is for MSI Windpad Enjoy 10", while mine is called Enjoy 10" Plus. So GG, I think I got owned. So retarded you don't even have to tell me.
Now whenever I try to turn on the tablet, it would simply vibrate, show the logo and then turns off. PC doesn't detect it.
However, I tried holding Power button + Reset button together, the PC detects it, but it's unknown and it can't identify it (even though I have MSI's drivers installed and all).
...Any ideas on how to overcome it?
I'm going to sleep now, and will check tomorrow. Thanks in advance.
[UPDATE] 2/22/2013 11:00pm gmt
I'm able to boot it only if I have it plugged in. I can only use Power + Volume controllers + Reset buttons. I can enter Recovery Mode but I cannot confirm/click on any selection.
Tablet does not get recognized by the computer in "Flashing Mode".
I forced to install the driver for the "Flashing mode" when the tablet is in recovery mode but programs like MSIFlashtool, RKBatchTool, RKAdnroid. (not sure if i correcly used the last 2... but whatever)
spilot said:
I've got an MSI Windpad Enjoy 10" Plus (http://www.msi.com/product/windpad/Enjoy-10-Plus.html) and I tried to flash it this ROM (http://forum.xda-developers.com/showthread.php?t=1540616).
The rom is for MSI Windpad Enjoy 10", while mine is called Enjoy 10" Plus. So GG, I think I got owned. So retarded you don't even have to tell me.
Now whenever I try to turn on the tablet, it would simply vibrate, show the logo and then turns off. PC doesn't detect it.
However, I tried holding Power button + Reset button together, the PC detects it, but it's unknown and it can't identify it (even though I have MSI's drivers installed and all).
...Any ideas on how to overcome it?
I'm going to sleep now, and will check tomorrow. Thanks in advance.
Click to expand...
Click to collapse
i dont think that that is called brick
anyways go download Odin and the stock image for your phone (in tar format)(just search on XDA)
put phone into download mode nd open odin
select PDA and select the tar file u downloaded
click start and it should take u back to stock
forgot if this unroots ur phone or not so u might have to root again.
Jack Jake said:
i dont think that that is called brick
anyways go download Odin and the stock image for your phone (in tar format)(just search on XDA)
put phone into download mode nd open odin
select PDA and select the tar file u downloaded
click start and it should take u back to stock
forgot if this unroots ur phone or not so u might have to root again.
Click to expand...
Click to collapse
This is not Samsung or a phone. Read what you are told
If you have a splash screen, you are not bricked. Does adb recognise your tablet? Can you access any recovery/download mode?
Sent from my ARCHOS 80G9 using Tapatalk HD
Quinny899 said:
This is not Samsung or a phone. Read what you are told
If you have a splash screen, you are not bricked. Does adb recognise your tablet? Can you access any recovery/download mode?
Click to expand...
Click to collapse
ADB doesn't recognize it. I tried holding Power + Reset button and did 'adb devices' on Ubuntu and it didn't show anything. On Windows, if I held these 2 buttons, it would show an unknown device in Device Manager. (Mind you, I don't have the Android SDK on Windows, just Linux.)
I can't access any recovery/download mode. Any combination of buttons (Power+VolDown, Power+VolUp/VolDown, Power+VolUP, Power+Home, Power+Back, Power+Settings) would do nothing.
-----------------------------------------------------------------------------------------------------
This what it does when I press Power + Reset Button with a needle. It boots up, splash screen, and stays on black screen (Btw, in this stage, it's Unknown Device in Windows Manager).Once I let go of Reset or Power button, it shuts down.
Turning it on without holding Reset, it would show splash screen, black screen and turns off in about 2 seconds.
Bump.
I've tried playing with it for some time. I can't get it to stay working without pressing power+reset buttons, it always shuts off...
Go to the device website, and download section, get the latest firmware and forget to download the flash driver.
Follow the steps that in firmware folder after unzip it, and you'll get your tablet on
Sent from my Enjoy 10 Plus using xda app-developers app
mramzi said:
Go to the device website, and download section, get the latest firmware and forget to download the flash driver.
Follow the steps that in firmware folder after unzip it, and you'll get your tablet on
Click to expand...
Click to collapse
... I was trying all the time to get it work on the PC without plugging the charger. Anyways~
(Tablet's turned off), I plugged charger, I plugged USB, I turned on the tablet and viola it actually worked and booted into OS. However, no buttons work AT ALL, and touch input doesn't work as well.
I tried to get into Recovery Mode and it worked, but I can go up/down using VolUp/VolDow buttons but I cannot click on any thing because the home button don't work nor any other.
Only Power + VolUp + VolDown + Reset buttons work... What to do now?
TL;DR I want to click on 'Update from SD Card' from the Android Recovery but I couldn't get the 'home' button to click enter on the selection. So what's the solution?
bump.
updates:
I tried to place the firmware from the official website as update.img on an SD Card and placed it in the tablet and went into the recovery mode and selected the 'update from sd card' but i couldn't click it. I tried to tap power, home, search, settings and back and nothing worked.
what I've got up until now:
I can boot into the ROM / RecoveryMod as long as I have the charger plugged in the tablet.
For Ubuntu, when I use the command $ tail -f /var/log/syslog and plug in my tablet, it shows this log http://pastebin.com/pBpBUA2Q (it identifies the tablet) [note, the tablet is booted into the ROM]
Also, if I'm in the recovery mode and I plug in the tablet, it would enumerate the USB... ~,~
Bump
bump
spilot said:
bump
Click to expand...
Click to collapse
Please don't bump your thread more than once in 24 hours, it's against the rules
Sent from my Galaxy Nexus using Tapatalk HD
bump
Hello,
I know it has been long since this thread stopped.
I'm currently in his shoes and for the life of me cannot find anything on the web to help me solve my problem.
My MSI Enjoy 10" Plus was flashed with the wrong MSI Enjoy 10" update. Now the tablet only turns on when in "Recovery Mode", but selecting in that mode is not possible using 10" Plus' buttons. Is there anyone from you good people that can help? Please? Thanks.
Uhm...bump?
Bump? Need help from the experts here. Please. I'm desperate.
Thank you very much in advance.

[Q] Soft Bricked/Samsung Centura

Hi all! I have a Samsung Centra have watched dozen's of youtube videos read a bunch and ya know what, I keep seeing and no one says anything is...If I am soft bricked, "USB device not found" wish people would stop telling others to plug your phone into your pc then go in adb-sdk-command prompt Usually if you are soft bricked your PC will not Reconize your Device....as in my case that means my Samsung logo is frozen on my screen. I can turn it off and on...Cannot use any 2-3 buttong combo and If I plug it in to my PC by way of USB, it turns off and on off and on, so thanks for letting me Vent ...lol!!! Just so frustrated really enjoy flashing rom's and Kernals and the whole Development aspect of Tecnology...So Please any one have any any Idea left Please help???
SoberD said:
Hi all! I have a Samsung Centra have watched dozen's of youtube videos read a bunch and ya know what, I keep seeing and no one says anything is...If I am soft bricked, "USB device not found" wish people would stop telling others to plug your phone into your pc then go in adb-sdk-command prompt Usually if you are soft bricked your PC will not Reconize your Device....as in my case that means my Samsung logo is frozen on my screen. I can turn it off and on...Cannot use any 2-3 buttong combo and If I plug it in to my PC by way of USB, it turns off and on off and on, so thanks for letting me Vent ...lol!!! Just so frustrated really enjoy flashing rom's and Kernals and the whole Development aspect of Tecnology...So Please any one have any any Idea left Please help???
Click to expand...
Click to collapse
You aren't going to get a connection of any sort when on that screen. You should pull the battery then pop it back in, and hold Vol Down while hitting Power (let go after a second, but keep holding Vol). This should get you into Download Mode. If it doesn't, then you should explain in more detail to what caused this as it is pretty difficult to get the phone to the point where it turns on but doesn't get into Download Mode or Recovery (Vol Up and Power).
es0tericcha0s said:
You aren't going to get a connection of any sort when on that screen. You should pull the battery then pop it back in, and hold Vol Down while hitting Power (let go after a second, but keep holding Vol). This should get you into Download Mode. If it doesn't, then you should explain in more detail to what caused this as it is pretty difficult to get the phone to the point where it turns on but doesn't get into Download Mode or Recovery (Vol Up and Power).
Click to expand...
Click to collapse
I originally had the Viper CWM then decided to put in Centura TWRP and when I did, I screwed up and clicked reboot without Clearing aything or wipe/Reset as soon as I hit the button I cringed new immediately what I did wrong?Now all Jammed up on a Soft Brick or maybe worse...I have tried a great many I deas even downloaded and Installed that Oneclick Unbrick no luck due to my Laptop just won't reconize USB Device If you have any Ideas I am all Ears and a good listerner, this... I look at as a Great Learning Expierence all frustrations are out of me lol!!!???
So what happens when you try to get to recovery or Download Mode? Just boots to the Samsung screen?
es0tericcha0s said:
So what happens when you try to get to recovery or Download Mode? Just boots to the Samsung screen?
Click to expand...
Click to collapse
Yes that is correct I have been do reserch and trying to find simple instrutions how to add my stock rom to my sd card which I have done but there is the same problem every youtube video or reading material I see, says to get into download mode..lol
Unfortunatly I cannot do anything or even get into fastboot or have my pc reconise usb drivers.I even actually tried that Oneclick unbrick program .jar file no luck. I did get a new lesson on how to open .Jar files so that was Cool...
I think a USB jig might work to force it into Download Mode.

Categories

Resources