This adds a 3d setting to settings>display
i'd like to know if it works because i dont have an evo 3d currently with me to test on
just flash this zip in recovery and wipe cache and dalvik cache Thanks
And id appreciate some fast feedback because id like to include this in my rom that ill release later today
http://www.multiupload.com/GVV1XYP5XA
no 3d setting. put a bunch of new names for the settings like data roaming instead of wireless settings
personal data instead of privacy.
hope that helps
really no new settings?
in settings>display that says 3d homescreen?
I can tell you in a minute, im booting it back up now!
Deleted my settings, i have no settings now!
Forgot to delete cache and dalvike before flash and settings got deleted. Re-wiped then flashed again, and it worked. I turned settings on and home screen was 3d BUT the calibration seemed off it wouldn't return to normal when I stopped moving phone
SHOTS FIRED!!! From 3 Dimensions!
anti-up said:
Forgot to delete cache and dalvike before flash and settings got deleted. Re-wiped then flashed again, and it worked. I turned settings on and home screen was 3d BUT the calibration seemed off it wouldn't return to normal when I stopped moving phone
SHOTS FIRED!!! From 3 Dimensions!
Click to expand...
Click to collapse
yea try calibrating the g sensor
That worked... Thank you for all your work, it's greatly appreciated!
SHOTS FIRED!!! From 3 Dimensions!
First try no settings...second try seems as if it worked but is off. I tried taking a screen shot but it doesn't come out good enough to see. Very close though...good work
*update, I tried calibrating and it seems better but not 100%. I shall try some more and see what happens then update post.
**update, ummm I have no settings now. All I did was power down completely and reboot. Now I tap settings and nothing happens. From the pull down bar I hit All Settings and get the below error.
The application Status Bar (process com. android.systemui) has stopped unexpectedly. Please try again.
Can't seem to get my settings back :-(
Ive redone this 3 times and still no settings, but im getting an error, no sd-ext when i wipe dalvik
JoelZ9614 said:
This adds a 3d setting to settings>display
i'd like to know if it works because i dont have an evo 3d currently with me to test on
just flash this zip in recovery and wipe cache and dalvik cache Thanks
And id appreciate some fast feedback because id like to include this in my rom that ill release later today
http://www.multiupload.com/GVV1XYP5XA
Click to expand...
Click to collapse
Hey... I noticed this in the update script...
mount("ext4", "EMMC", "/dev/block/mmcblk0p23", "/system")
i just so happen to have my SD partitioned with an ext4, alongside with a 1gig swap partition [irrelevant]. idk just saying, might be helpful to have the ext4 right?
so i wiped both caches, flash, and wiped both again... boot up, and i have no settings (click menu>settings, doesn't work)... I checked the app drawer, and also, no settings there. So then I used root explorer to delete Settings.apk from /system/app... and then i added in your copy... Unfortunately, I forgot to enable non-market installs (fresh rom install). So, I'm reflashing the rom, and then you zip....
Works for me...Did you include a setting for the dock in it?
EDIT: I Turned it off because it is annoying when it just moves randomly as i move my phone when i dont want it to lol
southern87 said:
Works for me...Did you include a setting for the dock in it?
EDIT: I Turned it off because it is annoying when it just moves randomly as i move my phone when i dont want it to lol
Click to expand...
Click to collapse
Have you done any restarts on the phone? Did you do anything different during install?
I'm really curious why this is working for some yet, I still have no settings anymore.
You still working on this?
Related
I recently switched to this ROM and I've noticed the last couple of days when I unlock the screen it takes aprox 5-10 seconds for the clock widget and my app icons to appear. It dosent have the little black box that says loading but it actts like it should lol. Anybody have a direction they can point me in?
barberboy420 said:
I recently switched to this ROM and I've noticed the last couple of days when I unlock the screen it takes aprox 5-10 seconds for the clock widget and my app icons to appear. It dosent have the little black box that says loading but it actts like it should lol. Anybody have a direction they can point me in?
Click to expand...
Click to collapse
Dowload Cache Cleaner from the market. You should also be rebooting at least daily.
BrandoKC said:
Dowload Cache Cleaner from the market. You should also be rebooting at least daily.
Click to expand...
Click to collapse
I run Cache Cleaner NG and have it set to use the old cleaning method which is faster and cleans more, it just don't keep logs and I have it set to clean every 12 hours, but I'm guilty of not rebooting, and you can sure tell the difference, I'm gonna go grab dreds reboot app cause I'm very forgetful
Shifted to the extreme, cause I rawk Supreme
strapped365 said:
I run Cache Cleaner NG and have it set to use the old cleaning method which is faster and cleans more, it just don't keep logs and I have it set to clean every 12 hours, but I'm guilty of not rebooting, and you can sure tell the difference, I'm gonna go grab dreds reboot app cause I'm very forgetful
Shifted to the extreme, cause I rawk Supreme
Click to expand...
Click to collapse
I can't find the link to the reboot app :/. Found the thread but that's it
Sent from my PG06100 using Tapatalk
I've been using CacheMate for Root Users Free. Works great and it's Free.
I'm running the CM9 beta 0.2.0 by jokersax11 ([Ics] cm9 beta with camera CDMA/GSM/UMTS/HSDPA/WCDMA/roaming 2/22/12) and my capacitive touch buttons at the bottom of the screen*(Menu, Home, Back and Search) are not lighting up at all! I can't figure it out at all and I really need these buttons to light up, due to my recent switch from the LG Optimus S, and before that I had an AT&T HTC Inspire 4g (which have the home and menu buttons reversed). I use my phone alot at night and I desperately need to get this fixed! Is there something in the CM9 settings I'm overlooking? Or is there an app or mod that I could use to get control of them and get them working again? PLEASE HELP! I WOULD REALLY APPRECIATE ANY ADVICE OR ANY INFO ON HOW TO GET THESE BUTTONS TO LIGHT UP AGAIN! This is really frustrating!
Click the link below for the answer ...
http://forum.xda-developers.com/showthread.php?t=1526546
EDIT - Well that was fun. If you haven't figured it out, the link above goes to the other thread you started, with the same title, and the same body, in the same forum .... You should not create duplicate threads. For future reference best practice is create 1 thread and wait a minimum of 24 hours between bumps.
With that out of the way my actual advice is as follows, i dont believe the capacitive buttons are an issue with jokers CM build although i dont personally use it. This would indicate the answer lies in a) something you did b) something you didnt do c) something you installed
1. You can eliminate a and b without losing any info by going into your custom recovery and wiping cache and dalvik cache then doing a dirty flash on the rom (dirty flash = don't wipe data/factory). In this case there would be no reason to reflash gapps.
2. If that doesn't work, do a full wipe (data factory/system/dalvik) and reflash the ROM, then gapps. Be slow to in stall your apps and test the capicitive buttons frequently to ensure you haven't done anything to break them
Set the phone's brightness to Automatic.. Fixed..
People are so over dramatic sometimes lol.
Sent from my MB855 using Tapatalk
Thanks, that pointed me in the right direction. My auto brightness isn't working. I'm gonna do a "dirty flash" and see if that helps. Oh and btw,the second post was an accident and you can't delete your own thread.So, sorry about that.
eszumlas1985 said:
Thanks, that pointed me in the right direction. My auto brightness isn't working. I'm gonna do a "dirty flash" and see if that helps. Oh and btw,the second post was an accident and you can't delete your own thread.So, sorry about that.
Click to expand...
Click to collapse
Please come back and update the thread on if it works or not. Others may experience the same issue in the future and this thread could assist them.
Cheers!
i just now notices mine dont light up but o well my thumb pretty much know ware to push
Well, it's fixed. Don't know what the heck was going on but reflashed my CM9 & Google apps and voila my automatic brightness switch in settings started working again. No more problems and capacitive buttons work fine. Strange but at least it's fixed
Sent from my MB855 using xda premium
And sorry to anyone that needed a fix to this. I was involved in the tornado that hit Branson, Missouri and was unable to keep phone charged due to the power outage that lasted over a week, and had bigger things to worry about at the time, like getting shelter and food. But everything is ok now and hope this thread helps anyone that has this problem. Check to see if your automtic brightness switch is working under settings (mine wasn't working) So if it isn't working just reboot into recovery, wipe dalvik cache & /cache, and reflash your rom and gapps, then check in your settings to see if your automatic brightness is now working. If so your problem should be fixed and your capcitive buttons should now light up. It worked for me, hopefully it will work for you.
Sent from my MB855 using xda premium
eszumlas1985 said:
Check to see if your automtic brightness switch is working under settings (mine wasn't working) So if it isn't working just reboot into recovery, wipe dalvik cache & /cache, and reflash your rom and gapps, then check in your settings to see if your automatic brightness is now working. If so your problem should be fixed and your capcitive buttons should now light up. It worked for me, hopefully it will work for you.
Click to expand...
Click to collapse
Thanks man i just had to set the screen brightness to automatic and reboot once. It worked like a charm
So, I can't seem to be able to use a picture from the gallery as the lock screen wallpaper anymore. I used to be able to do this but it suddenly stopped working today. Any thoughts on what the problem could be?
Using a picture from the wallpaper gallery app still works though. But I can't add the picture I want to that gallery.
What happens exactly? It just doesn't show the gallery option?
Sent from my LG-P769 using xda app-developers app
So I've tried going through both the settings screen and the gallery. Everything will seem fine, it will even bring up the wallpaper changed notification, but when I go to the lock screen, the old wallpaper is still there. I'm at a loss so any help is appreciated.
Edit: I'm on a P769BK, if that helps.
Lord Basil said:
So I've tried going through both the settings screen and the gallery. Everything will seem fine, it will even bring up the wallpaper changed notification, but when I go to the lock screen, the old wallpaper is still there. I'm at a loss so any help is appreciated.
Edit: I'm on a P769BK, if that helps.
Click to expand...
Click to collapse
I have the same model. This happened to me after rooting a few times. You may need to re-run the root and reboot a few times. If that does not work try a factory reset.
Honestly I would do a factory reset
Sent from my Lg Optimus L9 P769BK using xda-premium
Imma try both methods when I get home. Thanks for the suggestions.
Well it turns out I didn't need to do either of those things. I just used titanium backup to wipe the lock screen settings app's data and it worked like charm. Thanks anyway for your help.
Lord Basil said:
Well it turns out I didn't need to do either of those things. I just used titanium backup to wipe the lock screen settings app's data and it worked like charm. Thanks anyway for your help.
Click to expand...
Click to collapse
Thanks for the tip, I've struggling with this issue for days I didn't want to do a factory reset it's just to much for a simple wallpaper change.
I did a wipe form titanium... and Voila it worked flawlessly.
Woke up this morning and the screen on my DNA is possessed! Cannot Swype...certain letters on the stock keyboard do not work or do other letters or symbols...
so I did a factory reset/wipe data, then wipe cahced, then dalvik, then in mounts and sotrage did format /system, /data, /cache for good measure then started over with Viper 1.10
Swype still does not work, though the stock keyboard now does. Also on the home screens, there is like a Sense "forcefield" that doesn;t allow me to move shortcuts in the last row up and shortcuts above the last row I can move anywhere, but I cannot bring them down into the last row.
In apps, when I try to scroll touching that "area' it exhibits very sensitive erractic behavior
I'm thinking at this point total hardware issuetime to use the warranty but does anyone have any other troubleshoots I should do? I'd hate to get a new or refurb withthe OTA and not be able to be S-Off...
Much appreciated in advnace.
bakemcbride21 said:
Woke up this morning and the screen on my DNA is possessed! Cannot Swype...certain letters on the stock keyboard do not work or do other letters or symbols...
so I did a factory reset/wipe data, then wipe cahced, then dalvik, then in mounts and sotrage did format /system, /data, /cache for good measure then started over with Viper 1.10
Swype still does not work, though the stock keyboard now does. Also on the home screens, there is like a Sense "forcefield" that doesn;t allow me to move shortcuts in the last row up and shortcuts above the last row I can move anywhere, but I cannot bring them down into the last row.
In apps, when I try to scroll touching that "area' it exhibits very sensitive erractic behavior
I'm thinking at this point total hardware issuetime to use the warranty but does anyone have any other troubleshoots I should do? I'd hate to get a new or refurb withthe OTA and not be able to be S-Off...
Much appreciated in advnace.
Click to expand...
Click to collapse
Try a completely different ROM and see if its still doing it
.torrented said:
Try a completely different ROM and see if its still doing it
Click to expand...
Click to collapse
Thanks! .that will be my Saturday morning plan...throw a stock rooted Rom on.
Hi. As of two days ago, my phone no longer vibrates when it is set to do so nor do I get the vibration/haptic feedback when pressing the home, back or menu buttons.
I've checked all the settings where I know to look and it appears to be set to on....anything I am missing? Running Viper 1.3.3 (for almost 2 months now)
places I've checked - Settings- Sound. Virbrate mode is set to ON and Vibrate on Touch is checked
I don't see anything in Viper Tweaks that would shut this off...
Going to eventually back everything up and reflash to see if it's just a software corruption before going the replacement route. Have already done the reboot into recovery wipe cache/dalvik cache
Any ideas or suggestions are welcome!
My guess man is try the ruu and see if that fixes it then just go back through the s-off process again and rooting
Sent from my HTC6435LVW using xda app-developers app
Vibrate motor probably died. Replacement time
bakemcbride21 said:
Hi. As of two days ago, my phone no longer vibrates when it is set to do so nor do I get the vibration/haptic feedback when pressing the home, back or menu buttons.
I've checked all the settings where I know to look and it appears to be set to on....anything I am missing? Running Viper 1.3.3 (for almost 2 months now)
places I've checked - Settings- Sound. Virbrate mode is set to ON and Vibrate on Touch is checked
I don't see anything in Viper Tweaks that would shut this off...
Going to eventually back everything up and reflash to see if it's just a software corruption before going the replacement route. Have already done the reboot into recovery wipe cache/dalvik cache
Any ideas or suggestions are welcome!
Click to expand...
Click to collapse
charge your battery.
beaups said:
charge your battery.
Click to expand...
Click to collapse
Think it's a hardware issue...I did a complete wipe and fresh install of viper 1-3-1 then OTA to 1-3-3 and still the same behavior..
Replacement phone en route.
Once the fresh wipe didn't work I just ran my nandroid to get back to normal...I'll run the same nandroid once rooted with the replacement as I now know it isn't software.
Thanks everyone for the replies! Hopefully I'll keep my string of fast binned DNA's in tact!