x10i continuously vibrates and hangs in flash mode - XPERIA X10 Q&A, Help & Troubleshooting

Hi there,
Here's my probelem and as i have read around the problem never has been helped out.
Oke after i have flashed my phone from 1.6 to 2.1 i never had any problems. but when i updated my phone from 2.1 using PC Companion to 2.3.3. the phone just died.
It keeps hagging in flash mode and after like 10 sec it vibrates and won't stop until the bat is dead.
What i have done:
I have tried to flashing it using the flash tools with many firmwares nothing worked, then i have used the SEUS repair function but when i use that it only wants to flash it to 2.3.3 and doesn't repair it, unless the repair is only reflashing and without whipe user data then it didn't work.
Oke anyone with ideas? There are like 3 other people with the same problem and i think we all have an X10i
So? The unbrickable phone has a weakness....

Um o think its a battery issue try either replacing it or charging it
Sent from my X10i using XDA App

I have the same issue, no, its not a battery problem, i have 2 x10i, i have no issue about the ulocked one. But with the x10i locked with Three Network the problem arised.
Is ur x10i unlocked? Coz if not, maybe its just a problem with locked networks.
Sent from my X10i using XDA App

I have bought a new bat so it's not a bat problem,
Yes it's a Vodafone NL Locked mob but i changed the firmware to global then it shouldn't be locked any more right???
Wel it won't boot only vibrates

Right, i also debranded my x10i to Global but still its simlocked to Three network.
Lets wait other ppl who have the same problem to confirm if it only happens with locked networks. If so, i think theres no solution ATM, we have to wait our devs to help us out.
Sent from my X10i using XDA App

It just looks like it happens with branded mob and X10(i) only....
I even tried to put it back to the original branded firmware, still no go....

Related

[Q] Briked my X10!

Hey,
I'm afraid I managed to somehow brick my X10 (although I know you all say that's impossible). But here's the problem:
My phone is on the cyanogenmod 6.1 (gingerbread), and was working perfectly fine for over a few months. But two weeks ago he suddenly went off, and I can't restart him. I think the phone freezes the moment the boot loader should load android. Because when I press the ON button, the LED flashes green, and the phone vibrates (as it would normally do), but then nothing! And the phone doesn't respond to anything else I do then. The only thing I can do is take out the battery, put it back in, and were back in the beginning stage
I tried to repair with SEUS and PC Companion. When it asks to plug in flash mode (plug in while holding the back button), I do so, and the PC recognizes the phone. But when it tries to repair, I get an error after a while. The progress bar shows no process at all, so I think the error is a time out error, because the phone is frozen.
I don't know what to do any more know, and I'm not really looking foreword to buying a knew phone already! So I hope you guys can help me!
Freekh
Have you tried flashtool? Its worth a shot.
Sent from my X10i using XDA Premium App
Tried, but I don't seem to find an entire rom to flash. Most roms I find are .zip or .7z, and those files don't contain an .ftf file.
Do know were I could find one?
Im on my phone now so I cant post a link, but search for "flashtool firmwares" in the devs section. It will take you back to stock 2.1 (Or 2.3 depending on the firmware you get)
Sent from my X10i using XDA Premium App
Tried Flashtool, but no succes! It says "Error Flashing. Aborted". No luck with that! But thanks anyway!
There must be some other way I can repair my phone..
i have exactly the same problem with my x10i, it only vibrates continuously but won't boot,
i tried everything, flashing with generic firmwares 1.6, 2.1 and 2.3.3 and repair using PC companion and SEUS still nothing ( i make sure that i have 50% battery before flashing)
when flashing it enters flash mode without even pressing the back key, when hooked to charger green LED lit immediately as if (flash mode)
i taught it was the LCD but i tried to use another xperia x10i motherboard and the LCD works fine (i have 2 xperia x10i btw)
any help will be much appreciated.
use the search option on this forum!
Sent from my X10 using XDA Premium App

[Q] WIFI keeps searching and didn't find anything.

Hi mates!
Few months back I unlocked my bootloader and recently used many custom ROMs and kernels. Unfortunately I could not use my wifi properly - I was on FreeXperia kernel and at very start wifi worked ok, but it stopped finding any networks after couple days of rom usage. Problem was reported on the Android Development sections in the ROM thread by many users, so I thought it will be fixed soon. Couple days ago I switched to DoomKernelv3, his wifi modules and Oodies MIUI ROM - worked perfectly but my wifi worked occasionally and stopped working again. I got back to stock now and I'm on Z's Recovery (very first one I used and had no wifi problems) and problem with no wifi networks still persists. Did I brick my wifi somehow? Is it possible? Does anybody experienced similar problem?
Any help would be GREATLY appreciated.
hey
honestly... i think there is a hardware problem in your phone....
cuz even after switching rom's you still have the same problem....
i would sugggest that your use seus and get back to stock version... and just get it fixed by them.....just keep saying them that wifi doesnt works and all.....
rohit25 said:
honestly... i think there is a hardware problem in your phone....
cuz even after switching rom's you still have the same problem....
i would sugggest that your use seus and get back to stock version... and just get it fixed by them.....just keep saying them that wifi doesnt works and all.....
Click to expand...
Click to collapse
Seus says my phone is up to date. Besides, I assume I need to unoot it and lock the bootloader back to use varanty?
Sent from my X10i using xda app-developers app
easy pesy
botson said:
Seus says my phone is up to date. Besides, I assume I need to unoot it and lock the bootloader back to use varanty?
Sent from my X10i using xda app-developers app
Click to expand...
Click to collapse
very easy mate....
just open seus.... support->update phone->repair phone written in red color->wait and then from the list of phone choose your's->now take the battery out for 5 seconds(15sec might also work)->put the battery in->press back button and keep pressing it and then connect the usb cable....->it would flash the stock rom back plus automatically lock the bootloader again....
VOILA....
claim your phone is having hardware problems to the repair guys..... if under warranty
rohit25 said:
very easy mate....
just open seus.... support->update phone->repair phone written in red color->wait and then from the list of phone choose your's->now take the battery out for 5 seconds(15sec might also work)->put the battery in->press back button and keep pressing it and then connect the usb cable....->it would flash the stock rom back plus automatically lock the bootloader again....
VOILA....
claim your phone is having hardware problems to the repair guys..... if under warranty
Click to expand...
Click to collapse
I don't think seus locks your bootloader you have to use s1 tool I'm pretty sure I may be wrong though
sent from my x10 using xda premium
it does lock.... coz every-time i got f'd while flashing i used seus and had to unlock the boot-loader every-time.... even though i checked with s1 tool first if the boot-loader was locked or not....
any way if you r on stock rom... those repair guys... wont even notice that you flashed the device
Hi!
I have had the same problem as you. Still after repairing it in PC Companion, the problem was still there.
So I left the phone for couple of days because I got Xperia S, and when I turned it on one day and searched for WiFi networks, it finally found some networks!!!
I don't know what 'fixed' it, but I think it's a hardware issue and I was going to get it repaired until it fixed itself
Sent from my LT26i using xda premium
I repaired the system with SEUS, no Recovery or root available anymore. I assume bootloader is locked back. Wifi works same way as it worked. Is there some wifi debug software to figure out what is going on?
Anyone?
botson said:
I repaired the system with SEUS, no Recovery or root available anymore. I assume bootloader is locked back. Wifi works same way as it worked. Is there some wifi debug software to figure out what is going on?
Anyone?
Click to expand...
Click to collapse
yes, me use rom manager. browse all options. u should see one called wifi scan interval. if i am not wrong, default is 480. change to the lowest possible

SE Xperia X10a refuses to boot no matter what

Okay, I was told to go here since people on AndroidForums.com had no clue on what to do.
Okay, here are my problems -
I received this Android from my mom and it was running Android 2.1. When I first got it, I turned it on without charging it. It booted up, came to the lockscreen, then about a second later turned off and now refuses to boot. I have tried flashing it with generic Android 2.1 and Stock ATT Android 2.1. But it refuses to do nothing but flashes a green light and vibrates. But that all it does. And PC Companion, SEUS, FlashTool have done nothing! So what do I do now? It accepts Flashes and restores, but it's like the Boot Files are corrupted. And I cannot JTAG, so is there any other options?
Thanks in Advanced,
NetworkLabs
NetworkLabs said:
Okay, I was told to go here since people on AndroidForums.com had no clue on what to do.
Okay, here are my problems -
I received this Android from my mom and it was running Android 2.1. When I first got it, I turned it on without charging it. It booted up, came to the lockscreen, then about a second later turned off and now refuses to boot. I have tried flashing it with generic Android 2.1 and Stock ATT Android 2.1. But it refuses to do nothing but flashes a green light and vibrates. But that all it does. And PC Companion, SEUS, FlashTool have done nothing! So what do I do now? It accepts Flashes and restores, but it's like the Boot Files are corrupted. And I cannot JTAG, so is there any other options?
Thanks in Advanced,
NetworkLabs
Click to expand...
Click to collapse
Plug in the charger while its off its most likely reallt dead!!!!
sent from my x10 using xda premium
stephenhiscock98 said:
Plug in the charger while its off its most likely reallt dead!!!!
sent from my x10 using xda premium
Click to expand...
Click to collapse
No, because I charged it all night and tried to turn it on with no success. So that isn't the problem...
Flash 2.3 firmware then do root,recovery(just in case you don't have it) and a kernel.
Sent from my Desire HD using xda premium
Here is the firmware, thank the logic please.http://forum.xda-developers.com/showthread.php?t=1749426
Sent from my Desire HD using xda premium
My only fear is after restore/flash to 2.3, it will most likely sit there forever. The screen doesn't even light up! So if is to happen, what do I do?
NetworkLabs said:
My only fear is after restore/flash to 2.3, it will most likely sit there forever. The screen doesn't even light up! So if is to happen, what do I do?
Click to expand...
Click to collapse
No it wont if you flash stock 2.3 it will wotk!
sent from my x10 using xda premium
I had quite the similar issue with my x10i. One day it just decided to stop working completely. No lights no nothing, tried everything, just dead. So I contacted SE and they said they could do nothing if the software had been tampered with, no matter how much I assured them if was a hardware related fault.. So I went to my carrier and they sent me to a phone repairing company (Fonemenders here in Ireland), who try fix the phone themselves by getting parts in from the manufacturers. If they deem your phone irreparable they will get you a new replacement. This is exactly what happened me. So the other day I received an email saying that seeing as my x10 couldn't be fixed, I'd be receiving a Sony Arc as a replacement! So i'm happily waiting for the Arc to get here while I use my moms old x8.
So my best advice if nothing is working, go to your carrier and hopefully they can get you through to a phone repairing place, and I wish you as good luck as my own
Well, I cannot replace the Phone since I am not really using it as a Phone. It will not be activated, it's just to mess around with. And I really don't want to buy a Samsung Galaxy Player just so I don't have to deal with this. So I'm going to try the Stock ROM now and see if it works. Do I have to wait for boot up or something?
Try to flash with SE Companion. It will work.
Well, I restored using SEUS because it's the only one that recognized the phone, other than FlashTool. After it restored, it said Unplug the phone and wait for first time. It will take a while. So I am currently doing that. Hope it turns on!
Well, I've restored it and it still sits here. What's next?
I am going to try to flash it using s1tool and see if that helps. Also, can someone please respond with what they think is wrong?
Okay, here's another question - In order to load the firmware you told me, does my Bootloader have to be UNLOCKED? If so, how do I do that without ROOT... Because I cannot do anything with the Phone.
NetworkLabs said:
Okay, here's another question - In order to load the firmware you told me, does my Bootloader have to be UNLOCKED? If so, how do I do that without ROOT... Because I cannot do anything with the Phone.
Click to expand...
Click to collapse
Nooo to flash a stock firmware you don't need unlocked bootloader
sent from my x10 using xda premium
Well, it won't let it. It either doesn't recognize the device or it returns a error... =/
I cannot flash the firmware that you suggested! It get's to system.sin and then aborts with no error information...
Any additional help?
NetworkLabs said:
I cannot flash the firmware that you suggested! It get's to system.sin and then aborts with no error information...
Click to expand...
Click to collapse
I have a question for you... is the phone rooted ? If not then try following
1) start your PC companion and select update software
2) if software say, your phone is up to date then use here will be repair option you need to select it.
3) once you select repair it will download stock GB 2.3.3 and after download it will ask you to plug you phone in flash mode
4) remove phones battery and connect the phone to your laptop.
5) now place the battery back while holding down the back button (3rd button from left) { this step is important as this will get your phone into flash mode.
6) above steps should get your phone back onto stock unrooted ROM...
if you want then use flash tool to root it again but be careful with kernels and bootloader
Set from my Transforer TF101 using xda app-developers app
Well, I think I have tried that and it still won't boot. But I will try again. (PS - Sorry for this old thread, but I just needed a break on working on it! I am going to try again and see if it works!)

[Q] Help I killed? my customers X10i

OK Im pretty new to Android flashing etc, so go easy please
Customer brought in X10i locked to Orange-UK and running firmware 1.6
I used flashtool to flash 2.1 rom and after flash completed, phone boots to SE logo (writing) and then is stuck.
I have tried updating using both SEUS and PCCompanion. Both say that they have updated the phone successfully but phone still does not start.
After flashing with PCC boot process was same problem as before except I briefly saw an image of a camera and a blue arrow pointing down to a phone.
After flashing with SEUS, the phone does not start at all. When I press the power button I see red led flash 3 times repeatedly.
I thought maybe battery has died, so I have connected to mains charger.
Now the phone seems flashes red led once (repeatedly) for about 2 minutes, then led changed to solid green for about 2 minutes,then powers-up to SE logo/writing and camera/blue arrow image briefly, before repeating the process again.
I am not sure if the phone is charging or not? (or maybe battery is not even depleted?)
I am trying to unlock the phone for my customer using SETool or (Omnia?) but both say that 1.6 is not supported and handset must be flashed to 2.1
Seems like I have fallen at the first hurdle
I have searched the www and read forums and tutorials etc and have been at this for nearly 7 hours solid now
Please help.
Thanks.
MK5
The red flashing light sounds like battery issue! Do you have another x10 to charge the battery?
Have you rooted the device and unlocked the bootlaoder?
If so and you can enter xrecovery and flash a custom ROM wolfs for example?
Simply power off the device unplug USB cable and just press back button repeatedly while it starts up!
Sent from my Nexus 7 using xda premium
---------- Post added at 08:24 AM ---------- Previous post was at 08:16 AM ----------
For future reference this application unlocks the sim lock of xperia x10i its free and simple to do
http://www.x10unlocked.com/
Sent from my Nexus 7 using xda premium
Thanks for replying
Hi,
Thank You for replying.
You are absolutely right about the battery/flashing lights. I have charged the battery externally and the red flashing light issue has gone.
The phone now powers up to SE writing, then camera and blue arrow, then back to SE writing and stops.
The phone was fully working on Orange-UK before I flashed it. It looked as though everything on it was stock and it had never been flashed or updated ever.
I have not tried to root it or unlock bootloader (Im not even sure what unlocking bootloader means?)
What can I try next to bring this back to life?
Should I just keep trying to flash different roms?
Maybe I should try to flash stock Orange-UK firmware?
Thanks for your help so far, and look forward to your reply
MK5
help
Sorry I dont mean to double post or annoy anyone but please can someone help me with this.
Thats nearly another day and still I am stuck at SE logo/writing
I have flashed 5 or 6 different roms now, all with same end result.
I think I am missing something somewhere?
Do I need to upgrade/downgrade kernel?
and what is usb debugging setting? I set it to 'on' when phone was working at the very start, but I think now it is off.
Do I need this to be on before flashing? and if so, how do i do this if the phone is not booting?
Thanks.
MK5
You will need the phone to boot up to put debugging on! This needs to be on to root the device! It wont root without it. It makes sense why your stuck at se logo im sure if you flash the wrong firmware to the phone it wont boot up flash the orange firmware 2.1 or 2.3. British orange version then root using flashtool and use the program in the link above to unlock the sim
Let me know if it works?!!
Good luck!!
Sent from my Google Nexus S using xda premium
1eyedmonster said:
You will need the phone to boot up to put debugging on! This needs to be on to root the device! It wont root without it. It makes sense why your stuck at se logo im sure if you flash the wrong firmware to the phone it wont boot up flash the orange firmware 2.1 or 2.3. British orange version then root using flashtool and use the program in the link above to unlock the sim
Let me know if it works?!!
Good luck!!
Sent from my Google Nexus S using xda premium
Click to expand...
Click to collapse
Thanks m8, I'll give that a go. Battery has just died again, so giving it another charge just now.
Just a point to notw? - When i update the phone in SEUS, the process tells me that the update has completed successfully, but phone doesnt boot, and if I connect to SEUS again, it tells me that an update is available and this goes 'round in circles'
Is it possible that the phone somehow isnt actually getting flashed properly?
anyways will try the Ora-UK firmware first.
Should I look for stock 1.6 as that is what wason it originally? or can i go right ahead with 2.1?
Also where can I download these from? The only links I found for 2.1 orange were dead (megaupload)
Thanks for all your help so far m8. I appreciate it
star
m8 you are a star
I got firmware from omnius and unzipped and made a couple of modifications (as per tutorial on the site)
flashed my newly created ftf file and the phone booted
Back to running stock 1.6
I need to make sure I do things properly this time.
Can you give me any pointers as to the correct tutorials to follow?
I just want to unlock the phone so it will accept a Vodafone sim card.
Not too bothered about debranding and custom roms etc.
Thanks.
MK5

!! (Need Help) Hard bricked xperia mini pro!!

Hey i Need Help! :crying:
I Hard Bricked My xperia mini pro,
I Change the imei number on the phone (i know its iligal) with octopus, i turned it on and was working great, but after 15 minutes it started turning off every minute. I tried reflashing it but after 5 times trying to flash it now i cant get "flash mode" (green led) to work, when i connect to pc i dont get nothing no even "unknow device" all i can get is test point is there any way to get it back working
PD: The bootloader wasnt unlocked its locked, i already tryed unlocking it but no luck! :crying:
sorry my english is bad
Changing IMEI will always have a great big risk...my only supposed answer for your problem is to send it back to service
Sent from my LT28h using xda premium
Change imei? Why did you do that?What for?
UchihaDareNial said:
Changing IMEI will always have a great big risk...my only supposed answer for your problem is to send it back to service
Sent from my LT28h using xda premium
Click to expand...
Click to collapse
Use Sony PC Companion 2.1 for flashing & updating rom originaly
I hear so many times about restarting every 15 minute, and the problem is IC power brick, u need to change u'r phone I guess :crying:

Categories

Resources