Hi,
I've just become an happy owner of the Atrix since a week.
I'm writing to ask about a strange behaviour that's happening to my phone: my battery it's at full charge, and the phone is switched off. I plug the usb cable to the pc and to the phone, and the phone boot up himself. Not to regharge mode (the screen with the battery charging), but in phone mode.
Usb setting on the phone is set to none, and I've tried it also on a pc without the motorola software. Do you know it as a bug?
My version is 4.4.20.MB860.Retail.en.DE (Android version 2.2.2) and I've rooted the phone.
Thanks in advance!
hmm that's odd because it happened to me last night. but i plugged it into the wall, booted right into cm7. i will have to look into this. although its not a major issue for me in any sense.
This has always happened with my Atrix, i just assumed it was the way the phone was designed.
if anyone has experienced any differently, please let me know.
It's the same for me too. If the phone is off and I plug in the USB cable (either connected to a pc or wall charger) the phone boots up. I assumed this is intended.
Sent from my MB860 using Tapatalk
Related
I noticed this issue, where the Photon powers on by itself when i plug it into the computer via usb.
When the phone is off and plugged to the wall charger I get the battery charging image. But When the phone is off and plugged into the computer via usb, it powers on. Also With the usb plugged in and in charge only mode, when i perform a shutdown on the phone, it restarts right after completing shutdown.
I know this might now be a serious issue, and no one have probably come across it but same thing happened when it was connected to the PS3, i powered it off while it was on and connected to ps3 via usb and it powered back on. This could be some weird usb sending out signals trying to mount the sd card and in return it forces the phone to turn on, can someone please verify this on their phone, my brother has a photon i am gonna try this on his later tonight, just need to know it is on mine,
Well i confirmed with another Photon, it is the same issue, whenever it is plugged into a USB it turns on by itself, dont know if this happens with other phones, but it is weird
Harry_Spade said:
Well i confirmed with another Photon, it is the same issue, whenever it is plugged into a USB it turns on by itself, dont know if this happens with other phones, but it is weird
Click to expand...
Click to collapse
Same thing here and it is so annoying when I am just trying to charge it and it keeps booting back up.
does anyone know of a solution, i ll try playing around with it, may be something with usb debugging, highly doubt it though
Same here. I think it must be designed this way for some reason.
Does it turn on if the USB is set to 'Charge Only' mode? I think it turns on automatically by design in Phone Portal or Sync modes but it probably shouldn't in Charge Only mode.
soo when i plug my phone to connect to my desktop it says it isn't recognized with a code error 43. It wouldn't install the phone and it won't charge while it is plugged in. and when i used my wall plug to try to charge my phone from there it still didn't work. help?
What did you do to make the phone un-responsive?
Sent from my SGH-T959 using xda premium
well it all started as i was upgrading my psu from my desktop and i guess the usb port was loose and when my desktop was put back together the usb i believe wasnt charging and i didn't notice at that time so i left it plugged with my microusb. i come back from eating finding my phone to be really hot like insanely hot and it wont turn on at all ! then i researched and found this thread to put it in download mode and so i did. but somehow i got stuck at the download mode, so i had this crazy idea that if i removed the driver .. it might work and it would install it's software like normal.. i guessed wrong. i turned off my phone since i didnt want to waste batteries. after removing the the driver i noticed that i cant charge my phone at all .. like i have two different chargers and both didnt work, the microusb and wallplug w/o the usb. now my computer won't recognize my device and won't even install at all
I think I just had an aneurysm.
Ow.
Hi I have a Atrix 4G and I was charging it fine yesterday and then today I tried to plug the phone to my computer but phone is not detected and then again the charging doesn't work too. what should I do and did anyone have this problem before? and there's no problem with the data cable cause I checked it with another phone.Please help me with this.
have you tried a different USB cable and it charger box for wall outlet?
Sent from my Galaxy Nexus using xda premium
What ROM have you got installed? I had this problem with CM7-ICS-MOD2 rom, but I reinstalled the ROM and its fine.
I've also had problems with buying cheap USB cables that pass some voltage/current to the phone (so it shows charging icon) but somehow Windows won't recognise the phone... doesn't sound like your problem tho
I think it's not the rom, I think it's the cable and it's not a cheap cable thought it's the normal motorola cable,well what could I say **** happens and all my data's gone cause I thought it might be a problem with the rom. thanks all
I had the same problem with a different phone.. The problem is connection point on the phone especially if it's not charging.. So I'm not sure if that's a part that can be replaced or not.
Hey all. I figured it out, went out side and took a different cable and it worked fine. it was a cable problem.thanks all for supporting.I'm gonna get a new cable from Motorola.
I have 4 cables that don't work on stock android 1.8.3 and I don't get it. I can use RSDLite and the computer detects it without the slightest issue. All the cables work flawlessly if I start rsd on phone boot and it detect right up. So what is wrong with the stock 1.8.3? Should I upgrade... I want to root my phone but can't since I can't use USB.... wtf?
When you plug in your phone, check if you see anything in device manager. Maybe you need to install drivers..
1chris89 said:
I have 4 cables that don't work on stock android 1.8.3 and I don't get it. I can use RSDLite and the computer detects it without the slightest issue. All the cables work flawlessly if I start rsd on phone boot and it detect right up. So what is wrong with the stock 1.8.3? Should I upgrade... I want to root my phone but can't since I can't use USB.... wtf?
Click to expand...
Click to collapse
Windows doesn't have a clue no matter how many perfect cables I use. It works and connects perfectly and immediately over rsdlite. I have 5 known to be working fine in cm7 cables. It will show as charging over AC if I restart the phone and keep the usb cable plugged in. It says it's charging over ac and it doesn't detect it in Media portal or mass storage or anything. Nothing shows up. Why is it that rsdlite works perfectly. This makes me seem that the android OS is at fault. Right? Nothing shows up in Device Manager. Only when in rsd lite mode, it will detect the phone and it will show up in Device Manager.
it's been about 48 hours one a full battery and it'll still at like 80%. I need to charge my phone soon...
Maybe I'll re-flash in rsdlite again? I flashed all the sbf's for stock roms with the same result. Should I reinstall again?
thanks
My Nook charges fine when turned off but does not charge at all when powered on. My nook also does not show up as a connected device when I plug it into my computer. I am rooted running CM9. Any advice?
Thanks
mikenexus said:
My Nook charges fine when turned off but does not charge at all when powered on. My nook also does not show up as a connected device when I plug it into my computer. I am rooted running CM9. Any advice?
Thanks
Click to expand...
Click to collapse
IF you mean that it doesn't charge while the screen is on and connected to the PC, that's normal behavior... the current draw is too much for the USB port to maintain the operational draw as well as provide any extra to charge it. Most of the time, you'll notice that you're actually still losing charge even though it's plugged into the PC... albeit at a much slower rate than usual.
As far as it not being recognized... what do you mean? You don't get the drives mounted? It's not being recognized by ADB? There's plenty of threads related to ADB, try giving it a search. If you mean that the drives aren't being recognized, you have to have a SD card in and turn on USB Sharing (or whatever it's actually called) it should be in the notification area.
Thanks for the reply,
It does not charge from an outlet while powered on; only when powered off.
What I mean in regards to it not showing up on the PC: I plug it in and it does not even recognize a device is plugged in - I don't even get to the install new drivers part. Its as if nothing was ever plugged to begin with.
The nook is recognized when I use my galaxy nexus usb cord and attach it to the computer. I am starting to think this is a hardware issue; I just find it strange that the hardware works as intended while the Nook is powered off.
Mike
There's a chance that you have a broken Nook cable then.
Try getting a battery monitoring app to see what sort of current you're getting while it's on. Is the "n" on the cord lighting up while it's plugged in and on?
Yes, when it is on and plugged in the "n" is green no matter the charge
I think you should try a different Nook cable, they can do that for you at B&N's actual store without you having to buy a new cable. If that doesn't work I would wager that it would be the port.
Now, I feel I should point out that for reasons unknown to me that manual specifically says you should not plug the unit in to charge while the unit is off. As I said, I don't know why. I know I have done that with my iPhone when I need a really fast charge (plug it in, then turn it off) but never had to do that with the Nook. Just... Some FYI for you.
I just picked up a used atrix that the owner said wouldn't charge. I swapped a known good battery in it and was able to get it to boot up. Thinking the USB port probably need replaced I looked for damage but could not find any and all the water sensors are fine. It wont charge from AC or from my computer and I have tried with 3 different known good USB cables and 3 different known good wall units that provide at least 5v (2 were official motorola chargers). Oddly enough my computer only detects that the phone is plugged in if the phone is in RSD mode or fastboot mode. I used rsdlite to flash back the 4.5.91 sbf hoping that a factory restore would do some magic but still no charging or mass storage mode identification. Any ideas or do I need to get comfortable with a soldering iron?
rmriggin said:
I just picked up a used atrix that the owner said wouldn't charge. I swapped a known good battery in it and was able to get it to boot up. Thinking the USB port probably need replaced I looked for damage but could not find any and all the water sensors are fine. It wont charge from AC or from my computer and I have tried with 3 different known good USB cables and 3 different known good wall units that provide at least 5v (2 were official motorola chargers). Oddly enough my computer only detects that the phone is plugged in if the phone is in RSD mode or fastboot mode. I used rsdlite to flash back the 4.5.91 sbf hoping that a factory restore would do some magic but still no charging or mass storage mode identification. Any ideas or do I need to get comfortable with a soldering iron?
Click to expand...
Click to collapse
same problem here, hopefully someone finds a fix.
For the heck of it i created an active usb cable and re did the auto unlock procedure and flashed epinters latest cm10 build. After boot the charge indicator came on but still didn't appear to be charging. Rebooted into recovery and factory reset then powered it down. I then plugged it into my tablets usb charger that outputs at least 9v and for the first time it went to the charge screen. Now it seems that it's able to charge again finally.
Sent from my MB860 using xda premium
rmriggin said:
For the heck of it i created an active usb cable and re did the auto unlock procedure and flashed epinters latest cm10 build. After boot the charge indicator came on but still didn't appear to be charging. Rebooted into recovery and factory reset then powered it down. I then plugged it into my tablets usb charger that outputs at least 9v and for the first time it went to the charge screen. Now it seems that it's able to charge again finally.
Sent from my MB860 using xda premium
Click to expand...
Click to collapse
how did you create an "active usb cable?"
thegogetter- said:
how did you create an "active usb cable?"
Click to expand...
Click to collapse
can i get an answer? mine still wont charge
thegogetter- said:
can i get an answer? mine still wont charge
Click to expand...
Click to collapse
Google it. In a nutshell, an active cable is a cable that has the fifth micro-USB pin (which is normally unused) connected to the (+) pin.