Related
I've had a look around and this issue has been brought up a few times, but then just brushed over without a concrete answer.
I have a few MKVs that I want to play on my phone, but that don't have sound.
I've tried with the stock player and with Mplayer.
I've spent the last few hours googling how to convert MKVs to AVIs and whatnot and tried a few times all unsuccessful.
I don't really want to covert them anyway, they all work fine, just not on the phone.
The video plays smoothly, and subtitles show up if it has them, just no sound.
How can I fix this?
OGG Vorbis audio track? Try Moboplayer. I just found out it'll read and play it, subs included.
That's what I'm using, Moboplayer and the stock player.
No sound from either.
I just noticed Moboplayer has a bunc of codecs in the market, do I need to install one of them? Which one?
well i have sound with stock player and mkv.... what sound is it ? DTS, DD ?
i use Vplayer, works fine for me. shows picture sound and subs
SuperTheMando said:
I've had a look around and this issue has been brought up a few times, but then just brushed over without a concrete answer.
I have a few MKVs that I want to play on my phone, but that don't have sound.
I've tried with the stock player and with Mplayer.
I've spent the last few hours googling how to convert MKVs to AVIs and whatnot and tried a few times all unsuccessful.
I don't really want to covert them anyway, they all work fine, just not on the phone.
The video plays smoothly, and subtitles show up if it has them, just no sound.
How can I fix this?
Click to expand...
Click to collapse
Most mkv's contain an ac3 soundtrack.
The SII doesn't like that.
I convert mkv's to mp4 now with avidemux.
With these settings:
- video: copy
- audio: AAC
Works like a charm!
Edit: it's a 'cheap' conversion, it goes very fast because only the audio track is converted.
SuperTheMando said:
I just noticed Moboplayer has a bunc of codecs in the market, do I need to install one of them? Which one?
Click to expand...
Click to collapse
The Mobo Player app should have an option to point you to the correct codec.
If you don't install the codec then it will only play the same formats as the stock video player.
I use mVideoPlayer, works fine for all of mine.
But I think DicePlayer has the best support for audio codecs, though it's only free for a trial period and doesn't support embedded subs (AFAIK).
I have these installed permanently as one of them usually does the job, I usually try stock first followed by mobo, then rock with Act1 and QQ as backups.
Dice is probably the best but isnt free.
Dice
mobo
rockplayer
act1
qq player
I have tried pretty much all other players, honestly dont waste your time or money on any of the others.
EDIT - sorry I forgot, since moving to this Phone I hace scrapped qq for everything and rock for HD stuff as it doesnt seem to decode as well as stock or mobo, always try stock first.
On my GS2 I do not see any option Mobo Player to point me to the correct codec, any clue?
MyrddinLXXIIX said:
Most mkv's contain an ac3 soundtrack.
The SII doesn't like that.
I convert mkv's to mp4 now with avidemux.
With these settings:
- video: copy
- audio: AAC
Works like a charm!
Edit: it's a 'cheap' conversion, it goes very fast because only the audio track is converted.
Click to expand...
Click to collapse
I like this idea best, it means I can play through the stock player, so I don't need to have unnecessary apps. I do like the stock player.
Is there any quality loss when doing this?
Will embedded subtitles carry over?
Edit: I just tried this, and the file it pushed out had a really low framerate. I could see jaggeddyness in frames.
Mobo is good. it's free.
Mobo's ffmpeg codec support almost all codecs.
but ffmpeg sw codec use CPU more than HW codec.
when playing 720p H.264+DTS mkv. mobo ( or rock ... ) sw codec use almost 100% CPU power.
Stock Player and DicePlayer use only 20-40% of CPU power. ( Audio codec use cpu.. )
SW codec players use lossy color convert and resize routine.
dithering or color loss will occur. ( you can see when playing dark scene )
HW Codec's Pros.
1. Performance ( Can Play 1080p )
2. Battery
3. image quality
Cons.
1. Codec compatibility ( but SGS2's HW codec is AWESOME. )
2. not supported codecs ( RMVB, VP6/7.. )
** dice player 1.1.2 add mkv embedded subs.
SuperTheMando said:
I like this idea best, it means I can play through the stock player, so I don't need to have unnecessary apps. I do like the stock player.
Is there any quality loss when doing this?
Will embedded subtitles carry over?
Edit: I just tried this, and the file it pushed out had a really low framerate. I could see jaggeddyness in frames.
Click to expand...
Click to collapse
Generally I get good results, but haven't tried it with movies yet.
Only 720p series with 25fps, no subtitles.
Back at my desktop tonight I will try a movie with subs.
The file I tried was a movie, 720p, no subs.
I don't know what it's framerate was, but it's pretty damn high. It looks seamless.
When I tried loading it with the app, I got this error. Maybe it is actually important and not to be overlooked?
I answered no.
SuperTheMando said:
The file I tried was a movie, 720p, no subs.
I don't know what it's framerate was, but it's pretty damn high. It looks seamless.
When I tried loading it with the app, I got this error. Maybe it is actually important and not to be overlooked?
I answered no.
Click to expand...
Click to collapse
I answered no every time without much problems. Forwarding in the stock player seems a little slow sometimes but that might be normal.
25 is pretty standard for series I believe.
Converting gives the advantage of hardware acceleration and I do not want to loose that.
MyrddinLXXIIX said:
I answered no every time without much problems. Forwarding in the stock player seems a little slow sometimes but that might be normal.
25 is pretty standard for series I believe.
Converting gives the advantage of hardware acceleration and I do not want to loose that.
Click to expand...
Click to collapse
Diceplayer give you hw acceleration without converting.
As promised...
Promised a follow-up with an mkv with subtitles.
I must admit I didn't get it to work yet.
Unclear to me if it is even possible, I found some info that the stock player will accept separate subtitles like .srt but I have not confirmed that yet.
Ran across another problem that put me off track.
Tried a conversion to mp4 with a movie but didn't think about the size restrictions.
Could not connect in Storage mode for some reason, so I tried to use SD-cards / usb-otg. No succes with 4 Gig+ files yet ~ using windows which has exFAT and NTFS, neither is working.
Possibly there is a filesystem that will do the job on Win7 and Android 2.3.3?
My research tells me that exFAT is not really available for Android, too tired atm to look for alternatives from the Win side.
Like USB-OTG very much, would like a way to get 4G+ files to my SII that way!
As I said, got sidetracked seriously ~ apologies if I got too far offtopic.
Hello there, I am going on a two week holiday, and want to watch a movie or two on my phone, the files are about 700mb, file formats are .avi and .mp4 .... whats the best player to play these smoothly???
I've found QQPlayer gets the best performance on my hero.
Moboplayer .....
I Think moboplayer is Best .....
Sometimes, the players are only playing videos correctly incoded for your device.
As an example, with Mobo Player(that I found really great) I can't play any .avi video correctly, it freezes all the time, ...
But with .mp4 format I have no problem...
Moreover, some encoded mp4 videos have some video bitrates that are too high, and the player can't decode it...
So, as for me you should try to re-encode instead of trying to find the best player.
The player is only UI about, so it depends on the things you're looking for
I've tried a few different players, and most of them work really poorly on the Hero. RockPlayer plays everything I've tried, but the FPS is usually low, and the audio keeps getting out of sync. QQPlayer didn't play the clips i wanted to, so i can't say for that.
The best playback I've seen was with yxplayer. There were a lot of small artifacts, but the fps and audio was ok. The UI is pretty lousy though.
The simplest option IMO is to convert video beforehand, so it plays fine with the native hardware acceleration.
I put a bunch of videos on my new MicroSD that I got in the mail yesterday, and while all of them will run in Moboplayer (except for American Psycho which is in AVCHD in a .m2ts container), they all seem to stutter a bit.
So, I was wondering what is the most reliable video codec and container for the NT?
It says that it supports:
3GP, 3G2, MP4, M4V, MKV, WEBM, H.264 (Baseline/Main/High profile) up to 1920x1080, MPEG-4 Simple/Advanced Simple profile up to 1920x1080, & H.263
Click to expand...
Click to collapse
but H.264 seems to stop running every few seconds for me.
Quick edit: Just finished uploading an MKV file and it seems to be the best so far, although the subtitles are coming up even though I disabled them in Moboplayer.
Any other recommended video players perhaps?
i use mx video player personally
yea mx video player is most smooth IMO. If available SW Fast decoding provides best playback of HD files 720p or 1080p. Of course it drains more battery so yeah...
Just installed it and it's running much better than Mobo was for me, thanks you guys.
Any time. Btw handbrake is a great way to convert your dvd's to mkv or mpeg4 format. Blurays will be too large to play,but most dvd,s will be about 700meg. I also use anydvdhd to strip the drm. On the computer i also use media browser for listing the movies. Bluray dvd's i have are played with media player classic hd with shark 007 codec pack
I grabbed 2 Youtube music videos - one 720p and one 1080p - both mp4 files. They work with no issues with the B&N video player but mx video player installed from the market wont play them. I don't get any errors or warnings its just stuck there at 00:00 with no movement and a black screen with the video controls - all i can do is exit. If I am to install one of the codec packs from the market - arm6/7 etc - which one should it be? Not sure what the processor is!
OMGitsShan said:
I grabbed 2 Youtube music videos - one 720p and one 1080p - both mp4 files. They work with no issues with the B&N video player but mx video player installed from the market wont play them. I don't get any errors or warnings its just stuck there at 00:00 with no movement and a black screen with the video controls - all i can do is exit. If I am to install one of the codec packs from the market - arm6/7 etc - which one should it be? Not sure what the processor is!
Click to expand...
Click to collapse
From what I understand you shouldn't install ay codex pack unless mx player tells us to
Sent from my Nexus S using XDA Premium App
OMGitsShan said:
I grabbed 2 Youtube music videos - one 720p and one 1080p - both mp4 files. They work with no issues with the B&N video player but mx video player installed from the market wont play them. I don't get any errors or warnings its just stuck there at 00:00 with no movement and a black screen with the video controls - all i can do is exit. If I am to install one of the codec packs from the market - arm6/7 etc - which one should it be? Not sure what the processor is!
Click to expand...
Click to collapse
I think its ARM7 you want to get.
Also, mp4 is only a container filetype. The codec used for compression is also important, for example HuffyUV, H264, X263.
yea i have a video thats an avi but it closes out any media player right away...just opens the player then closes lol
Doctorword said:
yea i have a video thats an avi but it closes out any media player right away...just opens the player then closes lol
Click to expand...
Click to collapse
i have an avi on my NT and it loads fine. i think the previous poster was right about the codec. the codec is more important than the container. you might want to email the developers who made mx video player and ask them about it.
I need to run g-spot on it, it might have a weird codec or something
Been using Mx Video and it has worked with every video that I have thrown at it.
h264 codec is hardware accelerated in MX Video player. Even FullHD videos are played smoothly.
What container are you using? I can't get HW acceleration to work for any h.264 files in mkv, mp4, mov, or m4v. I use MX player and it kicks over to the SW decoder every time.
Here are my discoveries about HW video decoding in MX Player:
1. originally I uploaded some 1.5 gig MKV file downloaded from the web to SD card and tried to play it, but nothing happened - MX played it in SW mode.
2. Then, I created/converted some small video to MP4 (H.264 and AAC) and tried playing it with MX - and it worked fine
3. Strangely, but after playing hand-converted video MX started to play MKV, but with glitches...
So I think MX has some bugs when run on NT or it is not fully compatible with NT.
EDIT: ArcSoft Media Converter was used...
Hey guys,
Loving my Prime but I'm finding the video playback hit and miss to be honest.
I'm finding them all very buggy and most of them kick me out of the video randomly even without anything else running.
All of the below run perfectly on my friends Galaxy SII so it may be ICS?
I want to play back XVIDs and MKVs with subtitle support.
Below are the players I've tried and their results:
Google Videos:
Reads MicroSD
Plays MKV (some without sound) but NOT XVID
Doesn't support subtitles
STABLE
Rockplayer
Plays XVID & MKV
No subtitle support
UNSTABLE
MX Video Player Pro
Plays XVID & MKV
Subtitle support
UNSTABLE
MoboPlayer
Plays XVID & MKV
No subtitle support
UNSTABLE
How have you guys been finding video playback on this guy?
I play on using this tablet for a lot of video consumption so I'd love to get this sorted.
Thanks for the help!
Dice Player has been gold for me, playing everything I've thrown at it (720p mkv, avi, mpeg). I haven't tried anything with subtitles, but it supposedly supports them.
There's currently only the ad-supported version available, but the ads are small and don't show up at all should you use microHDMI to display the video on an external screen.
MX video player has worked great for me. Try different encoders if something in your video isn't working well (ie, HW, SW, etc). Also, try re-installing if you think ICS broke it.
Diceplayer is the best I think. Plays everything just fine and have good setting for subtitle.
I watch my videos most with subtitle and i haven't had any problems. Easy to change size and if you long press on the subtitle text you can move it up and down. Also have easy access to change the subtitle sync. And the add only shows when the controls are showing. here You don't see the add when the video plays and the controls and status bar hides.
And if some videos don't play properly i say that the problem often is the video file that is encoded strange.
MX Pro works great for me even on my high profile x264 encodes. SW decoder works better than HW decoder (go figure right? I would have thought the opposite) with fast mode disabled.
Edit: I have to agree with Andreas, if you're having playback issues it's likely the video not the player. Encoding is a subtle art, not everyone gets it right. Get your vids from well known sources like Thora.
Thanks a million guys.
MX Player Pro doesn't support HW decoding on the Transformer Prime. At least on mine it doesn't. Dunno why. And its really flakey. It keep crashing out on any file I try to play (XVID, MP4, MKV)
DicePlayer is WIN so far! Thanks for the recommend!
It's playing everything with subtitles too.
The only thing I don't like about it is the background 'behind' the movie is a gradient from black at the top to grey at the bottom so on some movies you've got a grey at the bottom of the picture instead of it playing on a full black background.
Unless you guys know how I can change that I'll be using DicePlayer until something better comes along.
HURRY UP VLC!
HW decoding technically works on my Prime, but SW decoding performs better. Is the option not even available for you in settings? Free or Pro? Also, no VLC...ever. Just no.
OK!
Very happy to report that after purchasing the full version of MX Player Pro EVERYTHING WORKS GREAT!!!!
Many thanks again guys!
XDA ROCKS!
lediva said:
Dice Player has been gold for me, playing everything I've thrown at it (720p mkv, avi, mpeg). I haven't tried anything with subtitles, but it supposedly supports them.
There's currently only the ad-supported version available, but the ads are small and don't show up at all should you use microHDMI to display the video on an external screen.
Click to expand...
Click to collapse
Another vote for DICE. Hopefully they can get their payment issues sorted out.
Dice is the best IMO. I run huge 1080p files and only Dice can handle it without a hiccup. MX Player Pro has a skip every once and a while. Not that big but Dice doesn't do it so it wins.
VitalPlayer Pro seems to work well. It can't navigate to the MicroSD card though.
BSPlayer has worked well for me. I use the lite version and all is good. It handles all video/audio as well has HW decoding for supported video types.
My vote goes to Dice player. It is the only one that I have tested that doesn't have audio lag when I am using bluetooth headphones. Also it plays everything I can throw at it.
And don't forget to instal mx player codec pack for armv7.. In market too.
MX Player will prompt you if it needs a codec pack installed. In the Primes case it does not, it is good to go.
Since I use and like DVD Catalyst 4 to convert my DVD's to video I also use their video app called Movie Gallery. Not sure if it plays all codecs but it sure works great with my converted DVD's
I used to use VPlayer when it was beta/free but now I use vlc for android http://cvpcs.org/blog/2011-09-18/videolan_for_android_pre-alpha
I get my TFP tomorrow but it works on my phone and the OG transformer according to the post so it should work on the prime. NONeon btw at least the OG was NONeon
I sure hope that it does.
video and sound on tv, subtitle on prime
I've tried Dice- and MX player and with both programs I get sound and video on my tv playing avi but the subs will be displayed only on the Prime. Has anyone the same problem or does someone a solution?
Does MXPlayer require an internet connection for the key verification? I saw some reviews that stated it did. Obviously on a wifi only device i may be without internet... Anyone have trouble with this?
Schutter said:
I've tried Dice- and MX player and with both programs I get sound and video on my tv playing avi but the subs will be displayed only on the Prime. Has anyone the same problem or does someone a solution?
Click to expand...
Click to collapse
You have to use software decoding if you want soft subs, the hardware decoder on the prime doesn't handle them when outputting.
I have lots of movies in .mkv format with .srt subtitles.
Can you recommend a free Windows program that can convert these into one package that my S3 can play?
setspeed said:
I have lots of movies in .mkv format with .srt subtitles.
Can you recommend a free Windows program that can convert these into one package that my S3 can play?
Click to expand...
Click to collapse
instead of converting you can try using mx video player from market, it has support for all types of subtitles
That's a good idea, and I will probably go with that - however at the moment I'm wanting to show off the features of my new phone to work colleagues, and popup play (although it's a gimmick) seems to impress! So I want to use the standard built in video player for that reason
Any suggestions? Is it even possible to combins .mkv & .srt into one file? I'm pretty ignorant when it comes to audiovisual stuff :-D
setspeed said:
That's a good idea, and I will probably go with that - however at the moment I'm wanting to show off the features of my new phone to work colleagues, and popup play (although it's a gimmick) seems to impress! So I want to use the standard built in video player for that reason
Any suggestions? Is it even possible to combins .mkv & .srt into one file? I'm pretty ignorant when it comes to audiovisual stuff :-D
Click to expand...
Click to collapse
hmm, here you go
http://www.videohelp.com/tools/MKVtoolnix
guide
bala_gamer said:
hmm, here you go
http://www.videohelp.com/tools/MKVtoolnix
guide
Click to expand...
Click to collapse
I tried using that and it seemed to be doing the job ok - (using the associated program MKVExtractGUI) it allows you to select the elements of video/sound/subs you want.
However the H264 file it spat out at the end won't play properly in VLC on my computer - it's jerky, jumping up and down from about 8 frames per second to 25fps and back again, lots of artifacts, and no sound or subtitles (despite me selecting those elements to be included).
If it barely plays in VLC on my laptop I doubt it's going to play on my phone...
Any more ideas?
Have you tried using the stock video player? It plays MKVs and subtitles out the box.
I tried that, that would be ideal - but it didn't play the mkv files i gave it. I'll try a couple of others and report back...
Ok well I've just found the first chink in this phone's armour:
It's very fussy about the .mkv files it will play.
It outright refuses some. Others it will play the video but no audio. Some it will play perfectly, unless you try and activate subtitles under the settings menu, in which case it craps out, freezes, and gives me a "this video cannot be played message." Even if I do manage to get it to play subtitles along with the video and audio, it's well out of sync - like minutes out of sync....
setspeed said:
Ok well I've just found the first chink in this phone's armour:
It's very fussy about the .mkv files it will play.
It outright refuses some. Others it will play the video but no audio. Some it will play perfectly, unless you try and activate subtitles under the settings menu, in which case it craps out, freezes, and gives me a "this video cannot be played message." Even if I do manage to get it to play subtitles along with the video and audio, it's well out of sync - like minutes out of sync....
Click to expand...
Click to collapse
Well if you do have to end up re-encoding your videos, try out Format Factory. It's free and has a ton of options.
I would suggest using MP4 and 'burning in' the subtitles. If you can't understand the the language you might as well have them a part of the video.
Thanks, I'll give that a try