Hello
Atrix and users in Korea is using.
Going into Android Recovery Failed to boot 2 error has occurred.
During the upgrade, the power was shut down.
Then came into Android Recovery error has occurred in
South Korea's Atrix did not crack the bootloader.
MID: Boot Recovery area were destroyed.
Is there no way to recover?
This error is really revolting.
Please help me.
1.power btn + volume key up
2. start rsd lite (status Connected!)
3. sbf flashing ..
4. done..
Related
I had shutdown my phone and when i try to turn it on again it show me this message stuck at Motorola Scree.
Failed to boot 2
Starting RSD Mode
What should i do??
PS: Im on a rooted phone with Stock Rom. Froyo 2.2
Is your bootloader unlocked?
I dont know.
It was working fine for 1 weak and now i got this error msg.
I have tryed to reset the phone holding Power button and volume down but no deal =xxx
Problema SOLVED !
Download RSD Lite 5.0
Download the SBF file
Install all driver from motorola softwares ( Moto Helper )
Open RSD
Turn on the Phone and plug USB cable
and start to flash the SBF file.
After that my phone is working again and i havent lost any program or files in my atrix.
Failed to Boot 1
Origionally the phone was on stock rom 2.3.6-4.5.141.
I had been running Nottachtrix's last rom and I needed to return to stock to give the phone to my daughter.
I decided to use RSD to flash back to stock and I ended up with failed to boot 1.
RSD gets to 99% and says "Switching to BP Pass through mode"(phone rebooting?) Screen on phone says "Failed to Boot 1"
RSD says "Error Switching failed flashing process" then says "error switching phone to BP passthrough mode(OX70BE);phone connected", results=fail
I re-downloaded the file:1FF-olympus-user-2.3.6-4.5.141-111212-release-keys-signed-ATT-US-GAS_NA_OLPSGBATTSPE_P012.sbf and retried three times with the same results.
Can I use any other ROM and use RSD to install it?
Any help on this would be appreciated.
Thanks in advance of any advice.
Bill
Update: After searching all day I got out of Failed to Boot 1 by flashing the preinstall image using RSD. Now I'm stuck in a boot loop!
Finally got my phone working.
My problem was with the latest update (4.5.145)and trying to go back to 4.5.141. From Moto website" You cannot downgrade back to original software 4.5.141 after this update".
I read in a post somewhere that if you go into recovery and mount the phone as usb storage you can get access to the internal storage.
I copied Nottach Trix 1.2.9 zip to the internal storage and flashed that through recovery.
Phone booted right up into Nottach Trix and no more boot-loop.
Bill
Hello everyone, I can not in any way to reinstall the stock rom 2.3.4 (Italy) to my Atrix. RSD stop after some reboot with "PASS" and on the phone and read "failed to boot4" "starting RSD mods." I read a guide on using the software "Automatic Unlock 4.2" option 3 but my phone if I reboot it with the volume key down hold not go in "fastboot mode" (M red and black screen after).
Can you help me?
Thank you.
Mauro
Rome
Hi Guys,
Help needed.
I followed the guide to unlock the Atrix MB860 running on froyo.
http://forum.xda-developers.com/showthread.php?t=1136261
After flashing the sbf file, it restarted and showed "failed to boot, entering in RSD mode". As it was given in instruction that this would happen and is called soft brick. So I restarted the phone trying to go in fastboot, but its not entering in fastboot, Screen gets on and it gets off immediately and nothing happens. Thought if powered on it shows:
SVF:108:1:2
Failed to boot 3
Starting RSD mode.
Please guide me out of this situation.
Thanks
I think I bricked my device big time in an effort to return to stock. I flashed 4.5.141 and later got a system update while bootloader was unlocked. I got Failed to boot 4.
Later, I tried to relfash the same 4.5.141 sbf and it failed to flash and I got "Failed to boot 1".
Now, I thought I will try to flash again using RSD lite and tried to get into RSD Mode using Vol Down+Power. I am supposed to see options to navigate to RSD and press Vol Up. The first option appears for half a second and the screen turns off.
I am not sure what this behavior is. However, it stays on if battery is low. It stays in NV Flash mode with a message "Battery too low... blah"
I tried to put into fastboot mode and did "fastboot reboot-bootloader". It rebooted but it does not get into RSD Lite mode. It just shows Failed to boot 1. I know how to fix Failed to Boot 1 issue. But this failure to enter RSD mode is killing..
Any one encountered this? Any help here please?
I got out of this problem by using sbf_flash and unlocked the bootloader (with pudding one). That unlocked my bootloader and my Vol Down+Power menu was accessible. And, I went to recovery, performed a wipe and rebooted.
Voila.. It booted very well. I am now in the latest stock. I went all the way from 2.3.6->4.1->4.4.4->Mokee 5.0 and then back to sweet old stock 2.3.6.
My experience with Atrix had been awesome from 2013 where i installed CM 10. It is a great phone and now it works as a music player for me.