I had shutdown my phone and when i try to turn it on again it show me this message stuck at Motorola Scree.
Failed to boot 2
Starting RSD Mode
What should i do??
PS: Im on a rooted phone with Stock Rom. Froyo 2.2
Is your bootloader unlocked?
I dont know.
It was working fine for 1 weak and now i got this error msg.
I have tryed to reset the phone holding Power button and volume down but no deal =xxx
Problema SOLVED !
Download RSD Lite 5.0
Download the SBF file
Install all driver from motorola softwares ( Moto Helper )
Open RSD
Turn on the Phone and plug USB cable
and start to flash the SBF file.
After that my phone is working again and i havent lost any program or files in my atrix.
Related
Hello,
I have a rooted and BL unlocked atrix.
Tried to use rom manager to install CWM. Tried to go into recovery but now it is saying: "Failed to boot 2" and under that "Starting RSD mode".
I have pulled battery and no luck.
Please help
Well cant enter fastboot either. Was going to try to flash tenfar's CWM but when i hold down the power and vol down key it it displays the before mentioned error and turns the phone off a millisecond later.
Good news however is that RSD still picks up the phone. I will go home and try to flash the pudding sdf again and see if i can get it to boot up that way. If anyone else has any ideas, let me know please.
flashed pudding using rsd lite and it booted up. Lost root but apps stayed.
Bricked stock MoPho. One day crashed and will no longer properly boot.
Cracked screen for a while now so warranty replacement not an option.
”Failed to boot 1” appears on M Dual Core screen on regular power attempt
“Failed to boot 1
PwrReason: PWR_KEY_PRESS
Starting Fastboot protocol support” appears on M Dual Core screen when hold Power and Volume Up
Screen briefly flashes and then goes black when hold Power and Volume Down
I have already attempted to flash stock Photon sbf file. Failed message after 99%
I have also attempted to flash stock Electrify sbf. Failed message right after process started.
Tried to flash on both regular power on and also on Power and Volume Up
Using RSD lite on windows7 64 bit.
Any ideas?
What was your build number?
Which photon sbf flashed?
Which electrify sbf flashed?
We need informations.
bull the battery out of the phone. plug phone into the pc then put the battery back in the phone. the phone should boot to the m logo and say failed to boot 1 it wont say rsd mode but its in rsd mode if you open rsd lite on the pc you will see the phone.
Files used:
1FF-sunfire-user-2.3.4-4.5.1A_SUN_USC_16.7-16-release-keys-signed-USC-US.sbf
1FF-sunfire-user-2.3.4-4.5.1A-1_SUN-154_MR-3-CM-release-keys-signed-Sprint-US.sbf
I don’t know exactly what Photon software version was on phone when bricked.
Ok, this looks like you're on the same boat with me and you need to unlock your bootloader, nothing more. If you want to use 4g, than there is no other way, only upgrading to the world of 2.3.5 sv2 locked bootloaders. But I suggest you, don't do that.
Thanks anyways guys.....still looks like I'm stuck with a worthless piece of equipment.
I don't think so, but you need to read in tegra sbf thread in development section, did you try to unlock?
having same prob and cant figure out
gui529 said:
having same prob and cant figure out
Click to expand...
Click to collapse
And do you want some help?
http://theunlockr.com/2009/10/06/how-to-set-up-adb-usb-drivers-for-android-devices/
Download the device manager thing for Motorola and try SBF agian
Hello everyone.
I own Motorola Atrix 4g AT&T with 2.3.4 / 4.5.91 Build.
I have read every single thread about Unlocking the bootloader yet I still cannot do it.
First I tried directly the fastboot unlock command for unlocking it but I had an error saying that OEM Unlock is not implemented. Thats OK since the stock bootloader isnt unlockable. So I downloaded RSD Lite as well as the two SBF files (the small pudding and the huge pudding (full version) of AT&T unlockable/pre root) Here is where I got stuck! I have the drivers properly installed and I tried both Windows7 and WindowsXP still i cant get past the boot logo. Here is the situation.
I connect the Phone in RSD Mode. In RSD Lite it shows as NS Flash Olympus and stays connected. When I load the SBF file and press start it gets to 100%. Then phone reboots and RSD Lites says that its waiting for phone to re-enumeration and after a while it gets the error message: Phone[0000]: Phone did not re-enumerate after RAM-downloader was sent.. Phone is still stuck on the Moto Logo untill I remove the battery. If I remove the battery Phone starts.
Am I missing something?
As far as I remember, once you flash pudding the phone will indeed seem unusable. Immediately after flashing pudding you need to go into fastboot and run the oem unlock commands, then you need to flash a custom recovery, then boot into recovery and flash a custom ROM. You miss any of these steps and the phone will very likely not boot.
ravilov said:
As far as I remember, once you flash pudding the phone will indeed seem unusable. Immediately after flashing pudding you need to go into fastboot and run the oem unlock commands, then you need to flash a custom recovery, then boot into recovery and flash a custom ROM. You miss any of these steps and the phone will very likely not boot.
Click to expand...
Click to collapse
The problem is that i cannot flash pudding since I get an error message after the extracting process when the phone is suppose to reboot and flash itself. It just reboots and stays with Motorola logo (RSD Lites gives me the error) and phone freezes untill I remove battery. After that when I power on the phone it just loads normally.
So the problem is that I cannot flash pudding.... simply because phone dosnt reenumerate after reboot....
Bump ...
I want to add that the phone dosnt have backlight in boot menus (ak. background light is turned off but i can still see the options in boot menus)
Also I am not able to install OTA Updates I get a triangle on the screen and phone boots into os with failed to update message.
Else phone is fully functional. I havnet done anything except rooting the phone and doing the tethering and webtop over hdmi hack.
m140n1 said:
Bump ...
I want to add that the phone dosnt have backlight in boot menus (ak. background light is turned off but i can still see the options in boot menus)
Also I am not able to install OTA Updates I get a triangle on the screen and phone boots into os with failed to update message.
Else phone is fully functional. I havnet done anything except rooting the phone and doing the tethering and webtop over hdmi hack.
Click to expand...
Click to collapse
Try this automated tool. There are several options to choose from.
Download tool here.
I wiped stock on my rooted droid razr. Now I'm unable to get back to normal. When plugged in to wall I get m logo. I can get into recovery n try to flash firmware but no luck. Reads file_getprop:failed to stat " system/build.prop:no such file or directory
Rsd didn't work either .got XML file n was connected fast boot but phone was not recognized. N/a
I'm stuck need help
This never happened to me... but i hope that somebody can help you in this thread:
http://forum.xda-developers.com/showthread.php?t=2194825
freddyfingaz said:
I wiped stock on my rooted droid razr. Now I'm unable to get back to normal. When plugged in to wall I get m logo. I can get into recovery n try to flash firmware but no luck. Reads file_getprop:failed to stat " system/build.prop:no such file or directory
Rsd didn't work either .got XML file n was connected fast boot but phone was not recognized. N/a
I'm stuck need help
Click to expand...
Click to collapse
try to boot to stock recovery and do a complete wipe...next boot into ap fastboot and your phone should now be detected by rsd lite...
and then you can flash a firmware depending upon your preference...
hope this helps
freddyfingaz said:
I wiped stock on my rooted droid razr. Now I'm unable to get back to normal. When plugged in to wall I get m logo. I can get into recovery n try to flash firmware but no luck. Reads file_getprop:failed to stat " system/build.prop:no such file or directory
Rsd didn't work either .got XML file n was connected fast boot but phone was not recognized. N/a
I'm stuck need help
Click to expand...
Click to collapse
Just flash it using rsdlite
download the file to flash depending your region
install the motorola device manager on your system
charge your phone for a few hours
then press the power and volume down buttons for five seconds (when your phone is off) then let go it should say ap fasboot mode and at the bottom battery ok
connect it to your system and then flash it
I think I bricked my device big time in an effort to return to stock. I flashed 4.5.141 and later got a system update while bootloader was unlocked. I got Failed to boot 4.
Later, I tried to relfash the same 4.5.141 sbf and it failed to flash and I got "Failed to boot 1".
Now, I thought I will try to flash again using RSD lite and tried to get into RSD Mode using Vol Down+Power. I am supposed to see options to navigate to RSD and press Vol Up. The first option appears for half a second and the screen turns off.
I am not sure what this behavior is. However, it stays on if battery is low. It stays in NV Flash mode with a message "Battery too low... blah"
I tried to put into fastboot mode and did "fastboot reboot-bootloader". It rebooted but it does not get into RSD Lite mode. It just shows Failed to boot 1. I know how to fix Failed to Boot 1 issue. But this failure to enter RSD mode is killing..
Any one encountered this? Any help here please?
I got out of this problem by using sbf_flash and unlocked the bootloader (with pudding one). That unlocked my bootloader and my Vol Down+Power menu was accessible. And, I went to recovery, performed a wipe and rebooted.
Voila.. It booted very well. I am now in the latest stock. I went all the way from 2.3.6->4.1->4.4.4->Mokee 5.0 and then back to sweet old stock 2.3.6.
My experience with Atrix had been awesome from 2013 where i installed CM 10. It is a great phone and now it works as a music player for me.