Is anyone planing on attempting to port over the new version of VegaComb. I would try however I'm not quite that good at making roms yet?
I thought it would work without needing much done, but haven't tried it...
I tried flashing the gtabcomb 1.1 and 1.2 over to my viewsonic 10s and it did not work.
if anyone can pull this off the gtab will have full hardware acceleration on hc. I hope someone port this!
I always thought the Advent Vega and the G-Tablet were nearly identical devices. How the hell are they running perfect Honeycomb 3.2 with full flash and hardware acceleration and we're still stuck on Honeycomb 3.0 with bugs galore??
i install BUT no boot
i install BUT no boot
i see is the new Kernel for 3.2 is the problem
luis250 said:
i install BUT no boot
i see is the new Kernel for 3.2 is the problem
Click to expand...
Click to collapse
Thanks for trying! I wish someone will port this!
Sent from my Flashback HC-TAB using XDA Forum App
So how hard would it be to look at one of our honeycomb kernels to make changes on their kernel to get it to boot?
BLT24 said:
So how hard would it be to look at one of our honeycomb kernels to make changes on their kernel to get it to boot?
Click to expand...
Click to collapse
You'd probably need a good idea of low level programming languages and a good understanding of how the hardware is setup to interact with each other.
Sent from my Flashback HC-TAB using XDA Forum App
barqers said:
You'd probably need a good idea of low level programming languages and a good understanding of how the hardware is setup to interact with each other.
Sent from my Flashback HC-TAB using XDA Forum App
Click to expand...
Click to collapse
Well i know xml and some basic java which android is built with but i wouldnt know where to start lol
Also could it be that the advent is using diff boot loaders?
BLT24 said:
Well i know xml and some basic java which android is built with but i wouldnt know where to start lol
Also could it be that the advent is using diff boot loaders?
Click to expand...
Click to collapse
The android system isn't made with java. It is actually C so unfortunately that won't help. I know C but I have little experience with kernels so I'm useless as well.
maxdamage2122 said:
The android system isn't made with java. It is actually C so unfortunately that won't help. I know C but I have little experience with kernels so I'm useless as well.
Click to expand...
Click to collapse
Yes your right lol the android UI is built with java but the kernel is built with C. But I have great news! Check this out: http://tinyurl.com/3ejzpew
I guess we can just wait and see but it looks promising!!
Well to install Vegacomb 3.2, you have to install Moddedstock 1.10 v2 first. I tried it on my Gtablet but it fails during NVlash cmb script right at the end. Without this Vegacomb 3.2 rom will not install.
I was under the impression that the Viewsonic Gtablet and the Advent Vega tablet were the same units basically, but a poster replied that no Vega roms will work on the Gtablet when I asked for some help.
So now I'm not sure. But if anyone can figure out how to get Moddedstock 1.10 v2 to work then Vegacomb 3.2 could possibly install.
Hoping.....
Related
So got an android tablet with android 2.2 that came with an instalable flash lite.apk.
The processor is similar to what we have on our xperia so I guess it should work on one of the 2.2 rom's.
Here is the apk.
If it works let me know. I don't want to flash 2.2 on my phone yet, so I didn't test it. But works quite well on the tablet.
lgstoian said:
So got an android tablet with android 2.2 that came with an instalable flash lite.apk.
The processor is similar to what we have on our xperia so I guess it should work on one of the 2.2 rom's.
Here is the apk.
If it works let me know. I don't want to flash 2.2 on my phone yet, so I didn't test it. But works quite well on the tablet.
Click to expand...
Click to collapse
Have tried just makes browsers force close
good find though
Im usin the HideNSek flashlight,thats a nice app
anybody tried?
it won't work we don't have compatible processor but if it will work I'll be hapy
revenge50 said:
Im usin the HideNSek flashlight,thats a nice app
Click to expand...
Click to collapse
hes not talking about a flashlight application
hes talking about Adobe Flash Player
I was wondering if any devs had given this a shot? It seems to have been done for the Iconia tab. I was thinking about trying to work on this tonight, theres a lot of performance enhancements in the 3.2 system from what I have heard in the xoom forums
Sounds awesome, I can be your beta tester
Sent from my SGH-I897 using XDA Premium App
Im also working on this right now as i am a complete newbie to dev. well see if it work. im doing a nand backup right now and will be flashing afterwards
No go: I always get a E:error /sdcard/update.zip (status 0)
i think my script is messed up
Wed need a few things to get this rolling:
- A deodexed ROM and have CWM version made http://forum.xda-developers.com/showthread.php?t=1165998
- Bonsai or Pershoot or Supercurio builds a 3.2 kernel from source (do we even have that yet?)
- Is 3.2 for XOOM a vanilla?
Are there any hardware difference such as wifi, BT, screen, sound that are different between the A500, XOOM and Tab 10.1? Also, just like HTC, there might be specific framework that works with only the XOOM and nothing else.
EDIT: From what I can see, there is definitely a different kernel for the 3.2 and not compatible to 3.1. Therefore without the proper kernel support, things WILL break. The CWM for the XOOM needs an external SD card and modifying the script might work. I will have a look into it.
killer23d said:
Wed need a few things to get this rolling:
- A deodexed ROM and have CWM version made http://forum.xda-developers.com/showthread.php?t=1165998
- Bonsai or Pershoot or Supercurio builds a 3.2 kernel from source (do we even have that yet?)
- Is 3.2 for XOOM a vanilla?
Are there any hardware difference such as wifi, BT, screen, sound that are different between the A500, XOOM and Tab 10.1? Also, just like HTC, there might be specific framework that works with only the XOOM and nothing else.
EDIT: From what I can see, there is definitely a different kernel for the 3.2 and not compatible to 3.1. Therefore without the proper kernel support, things WILL break. The CWM for the XOOM needs an external SD card and modifying the script might work. I will have a look into it.
Click to expand...
Click to collapse
I was able to get it to install but would not boot.
You are correct only 3.2 kernels work. Tiamat now has 2 kernals for xoom. One pre 3.2 and on post.
At this point building a kernal from scratch mixing and matching they're 3.2 kernal with our drivers is the only way
At this moment, I think Bonsai has the latest kernel using nVidia's source. I will post a message in his forum and see if he is interested in building his next customer OS from the XOOM 3.2 CWM.
I just want to share my appreciation and anticipation of a ROM with 3.2
killer23d said:
Wed need a few things to get this rolling:
- A deodexed ROM and have CWM version made http://forum.xda-developers.com/showthread.php?t=1165998
- Bonsai or Pershoot or Supercurio builds a 3.2 kernel from source (do we even have that yet?)
- Is 3.2 for XOOM a vanilla?
Are there any hardware difference such as wifi, BT, screen, sound that are different between the A500, XOOM and Tab 10.1? Also, just like HTC, there might be specific framework that works with only the XOOM and nothing else.
EDIT: From what I can see, there is definitely a different kernel for the 3.2 and not compatible to 3.1. Therefore without the proper kernel support, things WILL break. The CWM for the XOOM needs an external SD card and modifying the script might work. I will have a look into it.
Click to expand...
Click to collapse
Yeah, I gave their patched update.zip a glance last night and it doesnt look good in terms of 3.1 kernel support. I am still going to try a couple of things over the weekend, but we will probably need pershoot/randy's help in working out a 3.2 supported kernel. For now though... going to just use pershoot's 3.1 kernel, and try and merge their system.img with what we have for stock 3.1 on the GT. I'll report back if that has any luck
I messaged Randy and he will have a look at it when he has time.
In the mean time, I took a quick look at the APP folders and seems that there are many Moto apps on there that need to be stripped out of before it can be usable.
Got the XOOM 3.2 rom to boot on my tab, but have a some bugs to fix. Work ongoing...
DocRambone said:
Got the XOOM 3.2 rom to boot on my tab, but have a some bugs to fix. Work ongoing...
Click to expand...
Click to collapse
Awesome dude !! What kernel did you use ???
SellswordShev said:
Awesome dude !! What kernel did you use ???
Click to expand...
Click to collapse
A mix of 3.1 and 2... real mess.
But seems ok, have some digitizer issues, but that should be fixable. More tomorrow
DocRambone said:
A mix of 3.1 and 2... real mess.
But seems ok, have some digitizer issues, but that should be fixable. More tomorrow
Click to expand...
Click to collapse
Ah ok, if there is kernel patching involved then I'm definitely not messing around with this . Let me know if I can help in any way.
Good luck, can't wait to see the results!
Nice to see doc working on this. Going to open some kitchen space?
Edited, new base
Is it stable at this point? Need some help around the kitchen? I'd love to learn my way around these ROMs.
awesome doc is here.
and the gtab owners rejoiced.
Damn your teasing ...
Doc is in the house! I've worked with him before, and I have confidence in him!
Any updates?
This is a port of AOKP.
/// I'm having a few issues with building from source, and wont put too much time into it until the 3.0 kernel has progressed a bit more. It's making it a little harder to test on the 8GB also. That's not to say that the devs aren't doing a great job because they are. I will try to get some more ports up when I get the time.
Be aware that any and all issues that are present in AOKP and in the current CM9 for the Nook will be here and then some.
CM9 Thread : Currently using Alpha 0.03
The AOKP Port used the build for the Kindle Fire ("Otter")
Remember that this was just for fun and not to expect any major fixes from me, also that this is less functional than any current CM9 build.
If anyone wants to help out feel free. And if any one finds any other issues post and I'll update the Op
The instructions will be the same as CM9.
The 8GB uses a different recovery and instructions can be found Here
Change log
AOKP
5/16/12
B36
5/10/12----
B35 Added
5/8/12------
Screen rotation fixed in build.prop, thanks Modded Darts
Original Release-------
The nook displays the screen as if it's orientation is 90 degrees off to one side, yet the touch points on the screen will correspond to the way that it should be. You'll see what I mean if you try it
Thanks to everyone involved with with development on the Nook without you I wouldn't have a CWM to flash with or a CM9 to port from (especially getting it working on the 8GB too).
Also thanks to the AOKP team.
Thanks
link
B36
AOKP B35 5/10/12
AOKP M5 Port
AOKP M5 5/8/2012
Gapps
If we can figure out the screen thing ill try it! Thanks for your work!
Sent from my Team A CM9 Alpha 0.03 Nook Tablet
Can you give us more details about the port, like from where you ported it or you compiled it from source etc?
Any other details that might be necessary for anyone else wanting to take up this project or wanting to help you?
I did a port(no source build), and used aokp for the Kindle fire ("otter"), as it was the closest device I could see.
Sent from my Nook Tablet using XDA
Is this running Kernel 3.0 or 2.6?
Could we have a link to the original rom thread? Is this it?
Screenshots?
Specific rom install instructions, if any.
I found this collection of themes and mods, maybe some will work.
Flashing
Flash it like you would Cm9 if you have a gingerbread based rom. If you have Cm9 simply flash over it.
NookTabletsPower said:
Is this running Kernel 3.0 or 2.6?
Click to expand...
Click to collapse
Its based on the current CM9, so likely the 2.6 Kernel.
lost101 said:
Could we have a link to the original rom thread? Is this it?
Screenshots?
Specific rom install instructions, if any.
I found this collection of themes and mods, maybe some will work.
Click to expand...
Click to collapse
I guess that was the thread for it although I didn't go there I just downloaded from the aokp server. Alot of mods may somewhat work, but remember that they are usually device specific so more issues may arise if you flash them.
And yes it should be what ever kernel and hardware files that cm9 is using as that is where they were all pulled from.
Rotation
I haven't tested it but about half down on the build.prop it says ro.sf.hwrotation=270 when it should say 360 instead of 270.
Edit:It works fixes the touches and rotation.
If Keith puts that fix in the .zip I'll try it. I'm exited for a new ROM to flash!
Sent from my Team A CM9 Alpha 0.03 Nook Tablet
Cubanluke88 said:
Its based on the current CM9, so likely the 2.6 Kernel.
Click to expand...
Click to collapse
Lol but CM9 has the leaked Skyrocket kernel...
Sent from a better galaxy
Modded Darts said:
I haven't tested it but about half down on the build.prop it says ro.sf.hwrotation=270 when it should say 360 instead of 270.
Edit:It works fixes the touches and rotation.
Click to expand...
Click to collapse
Oh didn't realize that's all it was, good find . Since it was just a build prop edit I'll change it and post one up.
Sent from my CM7 Nook Tablet
Made a quick build.prop change and updated the OP
Ok, downloading right now. Do I have to find the right gapps? Will the current cm9 ones work? Can you link me to the gapps? Or are they built into it?
Sent from my Team A CM9 Alpha 0.03 Nook Tablet
Well I went ahead and flashed it. Found out I need some kind of gapps, I'll just wait until you link them. Overall the ROM is very...... alpha. Pretty much everything is laggy and when I tried to change the processor speed and governor under rom control it crashed settings. I did try changing some of the options under rom control and it worked great. Not a daily driver yet, but I think it has potential. Keep up the good work. I look forward to when I can use this full time
Sent from my Team A CM9 Alpha 0.03 Nook Tablet
AOKP uses the same gapps as cm9, so just flash that.
Sent from my SCH-I500 using Tapatalk 2
geeeee http://goo.im/gapps/ - pick from gapps-ICS-2012....
Just gave it a shot. Not a daily driver. Great work though!
SilentStormer said:
Well I went ahead and flashed it. Found out I need some kind of gapps, I'll just wait until you link them. Overall the ROM is very...... alpha. Pretty much everything is laggy and when I tried to change the processor speed and governor under rom control it crashed settings. I did try changing some of the options under rom control and it worked great. Not a daily driver yet, but I think it has potential. Keep up the good work. I look forward to when I can use this full time
Sent from my Team A CM9 Alpha 0.03 Nook Tablet
Click to expand...
Click to collapse
Yeah no daily driver here either, running CM7 until I can run video and probably until the kernel gets farther along.
I assuming that governors and different cpu states (at least ocing), aren't supported in the kernel.
I'll link gapps when I get to my pc its the same as cm9/ics.
Sent from my CM7 Nook Tablet
Not talking about oc'ing , I was talking about just making it always run at 1ghz. I'm doing that on Cm9 and it seems to help with a few of the bugs.
Sent from my Team A CM9 Alpha 0.03 Nook Tablet
CALLING ALL DEVS AND PORTERS
Galaxy s wifi/player 5.0
Ok guys ive been trying since the Galaxy Nexus OTA drop to try and port this to our device the GALAXY WIFI 5.0 but im having no luck so I am posting all i know here and I need help from devs please
Status:
Not booting Stuck on samsung logo
Here is a list of what I have done
Ramdisk diff
This is a diff file for the Jellybean ramdisk from ICS. This is from the galaxy nexus and will have to be changed for your specific device. Some notes that are not shown in the diff are that /sbin/adbd and init changed -- These are both binaries so they need to be manually taken from the jb ramdisk.
http://pastebin.com/xwCLRrT0
Files changed in /system/
This is a list of files that have changed in JB... Please check /vendor/{device vendor}/{device name}/ and[/SIZE][/SIZE] /device/{device vendor}/{device name}/ in the CM source to make sure they don't overlap... If any do, just keep your cm9 versions.
/system/app/ - Basically every apk, don't even bother copying individual changed files
/system/bin/
adb.p dumpsys.p mksh.p sdptool.p
applypatch.p fsck_msdos.p mtpd.p sensorservice.p
app_process.p gzip.p ndc.p servicemanager.p
bluetoothd.p hciattach.p netcfg.p service.p
bootanimation.p hostapd.p netd.p setup_fs.p
brcm_patchram_plus.p installd.p pand.p smc_pa_ctrl.p
bugreport.p ip6tables.p ping.p surfaceflinger.p
dalvikvm.p ip.p pppd.p system_server.p
dbus-daemon.p iptables.p racoon.p tc.p
debuggerd.p keystore.p rild.p tf_daemon.p
dexopt.p linker.p run-as.p toolbox.p
dhcpcd.p logcat.p schedtest.p vdc.p
dnsmasq.p logwrapper.p screencap.p vold.p
drmserver.p make_ext4fs.p screenshot.p wpa_supplicant.p
dumpstate.p mediaserver.p sdcard.p
NEW
atrace content e2fsck mdnsd requestsync uiautomator
/system/xbin/
dexdump.p/system/etc/apns-conf.xml.p fallback_fonts.xml.p permissions
audio_effects.conf.p gps.conf.p ppp
dhcpcd media_profiles.xml.p security
event-log-tags.p NOTICE.html.gz.p system_fonts.xml.p
NEW
audio_policy.conf media_codecs.xml security
fallback_fonts-ja.xml preferred-apps
/system/media/ & /system/fonts/ - Just take it all from jb as pretty much none is device specific.
/system/framework/ - Everything
Do we have to change the CM9 boot image ?
Im using CM9 as base
Good luck! I'd help, but I know ziltch about rom deving.
Sent from my YP-G70 using xda app-developers app
I still don't understand the obsession with SDK ports and winzip kangbang ports of firmwares from completely unrelated devices.
You're going to experience massive levels of frustration and achieve nothing in the next few weeks that won't be completely invalidated when source drops.
Entropy512 said:
I still don't understand the obsession with SDK ports and winzip kangbang ports of firmwares from completely unrelated devices.
You're going to experience massive levels of frustration and achieve nothing in the next few weeks that won't be completely invalidated when source drops.
Click to expand...
Click to collapse
I agree. I'm going to wait for the sources to be released before properly working on JB
Sent from my YP-G70 using xda app-developers app
Entropy512 said:
I still don't understand the obsession with SDK ports and winzip kangbang ports of firmwares from completely unrelated devices.
You're going to experience massive levels of frustration and achieve nothing in the next few weeks that won't be completely invalidated when source drops.
Click to expand...
Click to collapse
meh gives me something to do and I learn new things about Android development on the way, I enjoy expanding my knowledge lol
Rueben_ said:
meh gives me something to do and I learn new things about Android development on the way, I enjoy expanding my knowledge lol
Click to expand...
Click to collapse
Might join you on this if you don't mind? I also, have nothing to do at the minute.
What youa re trying to do is valid, and should be rewarding if it comes to fruition. But first you need a 4.1 kernel to use. If you don't have an appropriate kernel, it will be stuck at the bootloader like you described.
Why even port jelly bean if we dont even have a kernel for our ICS roms yet?
cleve321 said:
Why even port jelly bean if we dont even have a kernel for our ICS roms yet?
Click to expand...
Click to collapse
I am pretty sure this is for the 5.0, not the 4.0.
cleve321 said:
Why even port jelly bean if we dont even have a kernel for our ICS roms yet?
Click to expand...
Click to collapse
'Cause why not? If nothing else it could make it easier for when we Do have a kernel.
hanthesolo said:
I am pretty sure this is for the 5.0, not the 4.0.
Click to expand...
Click to collapse
I know that
DeLaVicci said:
'Cause why not? If nothing else it could make it easier for when we Do have a kernel.
Click to expand...
Click to collapse
Its gonna be awhile before we have a kernel.
hanthesolo said:
What youa re trying to do is valid, and should be rewarding if it comes to fruition. But first you need a 4.1 kernel to use. If you don't have an appropriate kernel, it will be stuck at the bootloader like you described.
Click to expand...
Click to collapse
Is that strictly true? With droid 4.1 not being a major update, I can't see there being a HUGE difference in Kernel.
cleve321 said:
Its gonna be awhile before we have a kernel.
Click to expand...
Click to collapse
Hope progress on that is still continued, cause without the proper kernel, it will just make ICS on our devices render useless when it comes to core features.
Sent from XDA
abtekk said:
Is that strictly true? With droid 4.1 not being a major update, I can't see there being a HUGE difference in Kernel.
Click to expand...
Click to collapse
Not being a 5.0 dev or a kernel dev don't hold me to my words, but I believe you must change the kernel before it boots a next android iteration. At least that was the case with honeycomb.
YoBob said:
Hope progress on that is still continued, cause without the proper kernel, it will just make ICS on our devices render useless when it comes to core features.
Sent from XDA
Click to expand...
Click to collapse
And Jelly bean is gonna be the same way too
hanthesolo said:
Not being a 5.0 dev or a kernel dev don't hold me to my words, but I believe you must change the kernel before it boots a next android iteration. At least that was the case with honeycomb.
Click to expand...
Click to collapse
But if I remember rightly, in order to boot CM9 properly on the Nook TABLET, they had to use the GB kernel.
abtekk said:
But if I remember rightly, in order to boot CM9 properly on the Nook TABLET, they had to use the GB kernel.
Click to expand...
Click to collapse
I am not saying you cannot use a older kernel, I just think you cannot use a unmodified older kernel.
cleve321 said:
And Jelly bean is gonna be the same way too
Click to expand...
Click to collapse
Hope not. Definitely want to see a post GB ROM as a daily driver. Hope dev work is still continued.
Sent from XDA
hanthesolo said:
Not being a 5.0 dev or a kernel dev don't hold me to my words, but I believe you must change the kernel before it boots a next android iteration. At least that was the case with honeycomb.
Click to expand...
Click to collapse
Well Jackpot's CM9 port used the CM7 kernel, if I recall.
Even if it was ported, there still wont be many feature we could use
Hi all, As I said, here comes the first version of android 4.3 for the x10. This is based on the evervolv ROM.
The binaries can be found in evervolv 4.3 folder.
https://www.wuala.com/CMX10-Releases/?key=CMX10Team
BUGS
NO CWM delivered with kernel
NO CHARGEMON
The WLOD that because famous with android 4.3
Maybe a lot more.
Install
Copy ROM on your SD card.
Wipe Data and Cache
Get into CWM and install ROM.
Flash the kernel.ftf using flashtool
This is an early version, I might not have time to work on it a lot. If someone wants the sources before their released, PM me.
Scritch
PS: Forgot the little disclaimer.
No warranty about this. I can't be blamed if somethings goes wrong or if phone is damaged. Use at your own risk.
Hi
Nice to see You again on X10 forum. I always liked you ROM. I hope this will be good too. Now downloading and check how it works
Great... what kernel version is used?
FeraVolt said:
Great... what kernel version is used?
Click to expand...
Click to collapse
Unfortunately still the old 2.6.29.
Good job! But unfortunately we won't be able to achieve the smoothness we want if we can't get out of kernel 2.6.29.
Great job and nice to see you back
Sent from my XT890 using xda app-developers app
Tof37 said:
Great job and nice to see you back
Sent from my XT890 using xda app-developers app
Click to expand...
Click to collapse
Hey).. Have you got my email regarding kernel?
I wish i had x10 and newer pc.. on my one core 1.6Ghz netbook i cant do much...
thank you all
FeraVolt said:
Hey).. Have you got my email regarding kernel?
I wish i had x10 and newer pc.. on my one core 1.6Ghz netbook i cant do much...
thank you all
Click to expand...
Click to collapse
Hey
Yes I got it... "just" have problems with display drivers... As scritch released his 4.4.3, I will work harder to make the kernel working... hopfully 4.4.3 bugs would be solved with it...
Sent from my XT890 using xda app-developers app
OMG!!! FeraVolt, Scritch007 & Tof37 are back together again! This is gonna be awesome!!!
you are the watchman of X10 my friend welcome back :highfive:
Thanks a scritch007 You're the Best
I am still using gingerbread developed by Feralab, I really want to use ice cream or jelly bean but there is no compete rom but the version is keep on releasing I don't understand it , then why there is no 3.x kernel developed is it impossible for our phone? Thanks for the people work hard to make us happy
Sent from my X10 using xda app-developers app
sudersanmurthy said:
I am still using gingerbread developed by Feralab, I really want to use ice cream or jelly bean but there is no compete rom but the version is keep on releasing I don't understand it , then why there is no 3.x kernel developed is it impossible for our phone? Thanks for the people work hard to make us happy
Sent from my X10 using xda app-developers app
Click to expand...
Click to collapse
There's some pretty cool version of JB. The CM10 now has every thing except hardware video encoding/decoding. Everything else is working nicely.
CM10.1 and Everolv 4.2 and 4.3 have an issue with the kernel. But I can't manage to fix it. So we've been working on newer kernel, 2.6.32 but it has a camera issue. And we're trying to port a newer kernel, but it's not that easy.
scritch007 said:
There's some pretty cool version of JB. The CM10 now has every thing except hardware video encoding/decoding. Everything else is working nicely.
CM10.1 and Everolv 4.2 and 4.3 have an issue with the kernel. But I can't manage to fix it. So we've been working on newer kernel, 2.6.32 but it has a camera issue. And we're trying to port a newer kernel, but it's not that easy.
Click to expand...
Click to collapse
I understand its very hard and you guys giving up your free time for this , i dont posses the knowledge so just wanted to know why version keeps moving on when latter is not finished yet thank you so much for you reply and ill try to be patient and support you guys :good:
I agree.. I was on the ICS version from FXP but when i recently switched back to Feravolt's GB, it was a lot more smoother and fast.. !!
people let us be fear .....to the fact that our phone is so old......and those ...guys has make the imposable daily usable tangible fact the>>>>>>>>> latest (4.3)
man this rock in it self let us give the credit for that >>>>>>>>>>>.thanks you all brother developer :highfive::highfive::highfive::highfive:
Superb
Wow... Superb...
Thanks guys, thanks for all your hard work in bringing 4.2 and (now) 4.3 version to our great x10 phone. I am using this phone from 2.5 years and used stock 1.6, 2.1, 2.3 and custom ROMs of Fera, Zahid5h, Scritch, Vasishta, Walker all 2.3, 4.1 and now 4.2.2 ROMs... It's been a great experience with this phone and with great ROMs by great Developers... Thanks a lot guys from all X10 users.
I really hope and wish this 4.3 ROM to be successfull and you people can able to get Linux 3.x kernel working for us..:good::good:
THANKS
:good::good::good:
Test day ;p
I installed this ROM yesterday. First thing - GPS work fine - dont know why you wrote on OP "NO GPS"?
ROM is fast and good - only problem is with WLOD usualy when first start some apps or doing something too fast ;p
Soplica said:
I installed this ROM yesterday. First thing - GPS work fine - dont know why you wrote on OP "NO GPS"?
ROM is fast and good - only problem is with WLOD usualy when first start some apps or doing something too fast ;p
Click to expand...
Click to collapse
Thanks for feedback.
I wrote, no GPS because I didn't find the icon to disable the GPS. But if you say it work's I'll update first page then .
Yeah WLOD, like for the 4.2.2, it's a shame, otherwise I like the Rom.
scritch007 said:
Thanks for feedback.
I wrote, no GPS because I didn't find the icon to disable the GPS. But if you say it work's I'll update first page then .
Yeah WLOD, like for the 4.2.2, it's a shame, otherwise I like the Rom.
Click to expand...
Click to collapse
Yeah, only place when You change something with GPS options is "Location access" in "Personal"
Some other options i cant find - for example i cant change icns on status bar - wifi, sync or something else - i dont know chow too change it ;p
But ROM can be nice in the future i like it too in alpha stage its better then other in beta ;p
One more thing - is it possible to restore USB charge or something like this to kernel? Becouse i read You remowe this options from source code and from 4.X kernel we cant use other then Sony charger - i have Philips charger for 2 phones but cant use it.