{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
What the hell is the slot at the bottom of the right side? Looks like it comes out...
EDIT:
Just found an X-Acto knife and got it pried out!
It's an 'information card,' so to speak. It's got the serial number and product number on it. That's pretty slick!
Looks like a 3G/4G Touchpad, so its probably the Sim slot.
If you press it it pops out and has the serial#
TonyStark23 said:
Looks like a 3G/4G Touchpad, so its probably the Sim slot.
Click to expand...
Click to collapse
Nah, I've got a 32GB WiFi Touchpad and it has the slot. It's on all of them. There's a little plastic filler that moves around, but I can't seem to get it out.
Just found an X-Acto knife and got it pried out!
It's an 'information card,' so to speak. It's got the serial number and product number on it. That's pretty slick!
slot is dummy sim tray,
Sent from my $99 HP Touchpad
|Jason8| said:
Just found an X-Acto knife and got it pried out!
It's an 'information card,' so to speak. It's got the serial number and product number on it. That's pretty slick!
Click to expand...
Click to collapse
greengiant said:
slot is dummy sim tray,
Sent from my $99 HP Touchpad
Click to expand...
Click to collapse
No it contains the serial num and more info. No need to pry it out.....just push it in with your nail and it ejects....it is spring loaded.
Nburnes said:
No it contains the serial num and more info. No need to pry it out.....just push it in with your nail and it ejects....it is spring loaded.
Click to expand...
Click to collapse
Yep. On the 4G model (which is probably never coming out here), it's for a SIM.
|Jason8| said:
What the hell is the slot at the bottom of the right side? Looks like it comes out...
EDIT:
Just found an X-Acto knife and got it pried out!
It's an 'information card,' so to speak. It's got the serial number and product number on it. That's pretty slick!
Click to expand...
Click to collapse
I saw a tear down video and they called it a sim card slot.
Lots of HP products have these model/serial tags. Our Proliant servers at work all have them as well. They just pop out when pressed.
Mine pops out with a push as well. SN and MN, no SIM slot. 32GB here.
[Q] Unknown Port South of Volume Rocker
I looked through all of the posts here and couldn't find similar, so don't delete or move.
The area south of the volume rocker that pops out the serial number and FCC info. I have been suspicious of this for some time so I broke mine off. It still slides in and locks in but now I get to remove it.
Well it looks like some kind of port inside. Too big for a card reader unless there is a module that could be placed in the slot. Anybody else looked at this or know what it might be for? Any chance of a mod to make it a SD or MicroSD card reader?
Definitely some kind of expansion port..
okay, wow, this is interesting! perhaps our TP has some hidden qualities, from which we do not know anything yet i´ll stay in touch here...
It's supposed to be a sim card slot, but I forget whether or not most Touchpads have the actual board hardware installed aside from just the port. By the way, what is your TP's model # (from Device Info)?
I may have answered my own question here..
http://www.techrepublic.com/photos/...=11&tag=siu-container;photopaging#photopaging
Probably is a SIM card slot but looks like it wasn't connected to anything but could be room for improvement if anybody is good with that sort of thing..
---------- Post added at 07:32 AM ---------- Previous post was at 07:26 AM ----------
nidlaX said:
It's supposed to be a sim card slot, but I forget whether or not most Touchpads have the actual board hardware installed aside from just the port. By the way, what is your TP's model # (from Device Info)?
Click to expand...
Click to collapse
Model # HSTNH-129C
Hardware Version " A "
This has been known and there is a thread already here. Another user decided to xacto knife his out.
I forgot where I read it, but I'm pretty sure it's a SIM card slot. The casing is the exact same for the upcoming (now-cancelled) TouchPad 4G for At&t. I guess it was a way for HP to cut costs.
it is a placeholder for the simcard slot that would've been available for the touchpad with 3G if HP did not discontinued production. that is all.
it's not a mysterious port, just a safe place to keep your serial number.
mputtr said:
it is a placeholder for the simcard slot that would've been available for the touchpad with 3G if HP did not discontinued production. that is all.
it's not a mysterious port, just a safe place to keep your serial number.
Click to expand...
Click to collapse
This ^. nothing more. Nothing about the "mystery slot" is usable in anyway "as is"
If, in any reach of the imagination a far reached mod involving adding a hardwired hack were possible, maybe, but it would not usable for the masses.
sim card slot ?¿
hi guys , just noticed that my HP touchpad seems to have a misc external slot seems you would put a sim card in there anyone knows what its for ?
its on the same side as the volume rocked at the bottom of the device
Related
Hi fellas,
I have recently bought a new HTC HD2 phone and it arrived a few days ago from Hong Kong.
Other than checking IMEI, is there any way to find out if the phone is a fake/replicate one from the phone appearance, etc.?
If I had known there are any fake HTC phones, I would have bough from more reputable retailers. I really didn't think the modern technology of HTC Hd2 can be faked...
Any idea would be appreciated.
If you can upload pictures that would be great. If its from Hong Kong and you bought it on eBay for a super low price its most likely fake. But you can tell if its real when while operating it the phone should feel like a badass piece of equipment. Or compare it to the people who show theirs on YouTube.
Sent from my HTC HD2 using XDA App
ceo4eva said:
If you can upload pictures that would be great. If its from Hong Kong and you bought it on eBay for a super low price its most likely fake. But you can tell if its real when while operating it the phone should feel like a badass piece of equipment. Or compare it to the people who show theirs on YouTube.
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
Look at the difference between Revisions of the two different parts of the box:
img17.imageshack.us/img17/287/img5655d.jpg ( REV B) look at the red arrow
img571.imageshack.us/img571/5381/img5656m.jpg (REV A ) look at the red arrow
Why they should differ in Revision? Is your phone boxing is the same?
--------------
And two pics from from the battery section.
img585.imageshack.us/i/img5658.jpg/
Is the IMEI stickers color inside of your phone is grayish? Or is it white? ( mine is grayish )
img38.imageshack.us/img38/4948/img5659n.jpg
Is the only word on your battery is "HTC"?
Thanks buddy
Our phone boxes are 500% different, when i get home i'll upload a picture of mine for you to see.
As for the phone itself i noticed a few differences b/w yours and mine, (NOTE) phones can get modified by the company and be released in a new batch to fix errors from first release.
But in the picture where the back of your phone was showing, at the bottom left theres a red dot.. On mine it's yellow, at the very top of that theres a white dot, mine is black. Small variations nothing too drastic, but as i said, when i get home (Currently in school) i will edit this post with pictures of mine.
The battery is the same
ceo4eva said:
Our phone boxes are 500% different, when i get home i'll upload a picture of mine for you to see.
As for the phone itself i noticed a few differences b/w yours and mine, (NOTE) phones can get modified by the company and be released in a new batch to fix errors from first release.
But in the picture where the back of your phone was showing, at the bottom left theres a red dot.. On mine it's yellow, at the very top of that theres a white dot, mine is black. Small variations nothing too drastic, but as i said, when i get home (Currently in school) i will edit this post with pictures of mine.
The battery is the same
Click to expand...
Click to collapse
Thanks buddy,
And kindly tell me if the IMEI sticker inside your phone is white or grayish when you got home.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The pic of my screen is like that because of the screen protection
Sent from my HTC HD2 using XDA App
Thanks mate. But I would delete the last image because all your phone specifications are visible...
Other than the box, our phones are almost similar.
I just tried to upgrade my ROM and received this message: The serial number you’ve provided appears to be invalid. Please try again.
So I am still worried.
What's the worse that can happen?
Sent from my HTC HD2 using XDA App
ceo4eva said:
What's the worse that can happen?
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
If you meant your phone specifications in the images provided, I have heard they can clone your phone using your phone specifications. So I would delete it soon!
So what is your conclusion, real or fake?
ceo4eva said:
So what is your conclusion, real or fake?
Click to expand...
Click to collapse
I am leaning towards real but not sure yet!
Can they even fake the phone?
sukru said:
Can they even fake the phone?
Click to expand...
Click to collapse
I was shocked as you are when I heard it! But apparently, yes!
So they have the same form factor, same processor, RAM, etc. And it's hard to spot a fake?
How can I know mine is not one (I got mine from eBay as well)?
sukru said:
So they have the same form factor, same processor, RAM, etc. And it's hard to spot a fake?
How can I know mine is not one (I got mine from eBay as well)?
Click to expand...
Click to collapse
I am looking for the same answer...
Sorry to bump, but compare the OS software. Can you do the same as another HD2?
Note that your device might be from a different region.
i see in the pic, the call keys are coloured but has no t mobile branding..which region is this from?......rom details please
pakure said:
i see in the pic, the call keys are coloured but has no t mobile branding..which region is this from?......rom details please
Click to expand...
Click to collapse
I don't know the region, and apparently unlocked and no-branded
trust me, if it would be really a fake, the differences would be definitelly bigger.
just to say, mine looks exactly like urs. the battery not, but ur battery is just a newer version than mine my friends got the same...
oh and the box looks like mine too, but i dont know my revision
lets just say, if its a t8585 and runs as it should, and if u can flash custom roms, run android and so on, its real. and i really think its real
EDIT: fakes look like this: http://www.engadget.com/2010/05/06/keepin-it-real-fake-htc-hd-too/
Its legit.
Sent from my Android HD2 via XDA app
Hey everyone
Just got a second hand i9100. Everything working except i have a part missing in the main board.
It seems to be some kind of black metal protector for the main board
My board looks like this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
And a normal board (from a YouTube disassemble video) looks like this:
I have both pictures in good quality but i can't post them....I'm a new member
Please help me, copy paste the links and you would see what I'm talking about
Can someone help me with the missing part? I can't find if in eBay cause i don't really now what to search for....
Search my posts from the past couple of weeks, I've attached the service manuals in a zip file to one of them, might help you identify the part (Has a full parts list down to the last tiny screw).
hey
Hey,
Found it. Very nice one! But, the metal mainboard protectors are not detailed there.
Searched the whole 6 PDFs but didn't find their name
I guess somehow a cheap local phone lab took it out deliberately because it an expensive parts (all 3 protectors gone (
What to do next?
Thanks!
You actually searched & found it ?! Well done (Most people would whine & say 'Give it to me now') Gold star for you
Not much of a hardware expert personally, I tend to leave that stuff to the experts. Perhaps KeithRoss or TheUnderling might read your thread soon & be able to help.
minkov said:
Hey everyone
Just got a second hand i9100. Everything working except i have a part missing in the main board.
It seems to be some kind of black metal protector for the main board
My board looks like this:
And a normal board (from a YouTube disassemble video) looks like this:
I have both pictures in good quality but i can't post them....I'm a new member
Please help me, copy paste the links and you would see what I'm talking about
Can someone help me with the missing part? I can't find if in eBay cause i don't really now what to search for....
Click to expand...
Click to collapse
Hi Dude,and welcome to XDA.I disassembled my phone yesterday(unmounted mainboard and everything,till the last screw,not for the first time)and I have to say that I don't have these protectors,and I've never seen them.So I don't know,but I think this makes nothing.My phone never had these protectors,but it worked fine everytime.No problems at all
Just read this thread and I can't see the photos......
I have disassembled an S2 recently and replaced parts, so if there's someway you can put the images into (for example) dropbox and provide the link, I can dl and take a look....
Sent from my Rooted, De bloated Stock JB powered S2 via PhilZ kernel and Tapatalk 2....
Ok....had a look at some pictures of motherboards on google and some video teardowns........
I am assuming those black plates are some sort of RF (radio frequency) shielding. I don't think they perform any critical electrical function. I did some part searches too.....without success.
My advice would be to re assemble the phone and use it as normal. If you notice any interference or static or any other "unusual" behaviour during use, then you will need to maybe contact Samsung to get those parts.....otherwise I wouldn't worry about it......
Edit.....I assume the picture below is what you're describing....
Sent from my Rooted, De bloated Stock JB powered S2 via PhilZ kernel and Tapatalk 2....
thanks for the help
keithross39 said:
Ok....had a look at some pictures of motherboards on google and some video teardowns........
I am assuming those black plates are some sort of RF (radio frequency) shielding. I don't think they perform any critical electrical function. I did some part searches too.....without success.
My advice would be to re assemble the phone and use it as normal. If you notice any interference or static or any other "unusual" behaviour during use, then you will need to maybe contact Samsung to get those parts.....otherwise I wouldn't worry about it......
Edit.....I assume the picture below is what you're describing....
Sent from my Rooted, De bloated Stock JB powered S2 via PhilZ kernel and Tapatalk 2....
Click to expand...
Click to collapse
Hey
Yes you all right, I think that the exact description is RF shields… So it means the phone can destroyed perhaps a magnetic rail like on a credit card and so?
Besides that i hope i wouldn't be harmful to the phone overtime..
Also yes these parts are unobtainable, maybe you need to buy the whole motherboard to get those RF shields back....
It won't harm the phone if you put a credit card next to it as the card is "passive". You might have an issue if the phone is placed next to the credit card reader....or if the phone gets anywhere near something that uses NFC (near field communication) technology. But otherwise it *should* be ok.....
Sent from my Rooted, De bloated Stock JB powered S2 via PhilZ kernel and Tapatalk 2....
I hope some one help me to get this Idea to whom care from any company of memories ( SanDisk or Kingston....etc ) or inside of hawuei company accessories Dept
....
Memory card same holder of sim card 2 .
This holder install director to mobile as same as old one ...
This holder build with memory card and space to install Sim card 2
This holder came with many size 64 GB or 32 GB or 128 GB
The face of holder came with many Color Gold , white , gray ......etc
This only way can work together Sim card and memory Card at same time
hope some one help me to reach this Idea
thanks
Can any one email me if have more idea .... [email protected]
or email me on private
Hi,
it is already possible to do it (although I never tried) by modding your second sim as shown in this post: http://forum.xda-developers.com/showpost.php?p=56131654&postcount=68
Good luck!
mensouille said:
Hi,
it is already possible to do it (although I never tried) by modding your second sim as shown in this post: http://forum.xda-developers.com/showpost.php?p=56131654&postcount=68
Good luck!
Click to expand...
Click to collapse
Cannot be done. Wasted a good sim. The tray cant go in after the mod. Forcing it in will spoil the pin. I tried cannot work. Dont waste your time.
Omg this mod is perfect, but how we can "take off" the copper from the plastic of the sim and be able to paste it again in the sd card ?
The problem is that, since it's impossible to simply paste the nano sim into the sd card, the width is to big and don't work in tray
How do you take of the copper from the plastic @getmobilephone ?
getmobilephone said:
Dear ahmadcentral
Please ref to the attached photo. If you have further question, please post it here.
GetMobilePhone
Click to expand...
Click to collapse
like this photo ....
the tray built with memory card and space to install SIM card 2
the question is does the Device working together sim 2 and SD same time ,... Its programming ?
Just make them slimmer nonprograming needed.
I made it with my sim and SD card.
@ndrey said:
Just make them slimmer nonprograming needed.
I made it with my sim and SD card.
Click to expand...
Click to collapse
add photo to see
baso2000 said:
add photo to see
Click to expand...
Click to collapse
I posted my experience on another forum
http://4pda.ru/forum/index.php?showtopic=599369&st=1280#entry36589580
@ndrey said:
I posted my experience on another forum
http://4pda.ru/forum/index.php?showtopic=599369&st=1280#entry36589580
Click to expand...
Click to collapse
I can not ready this Lang....
posted again here if would please
@ndrey said:
I posted my experience on another forum
http://4pda.ru/forum/index.php?showtopic=599369&st=1280#entry36589580
Click to expand...
Click to collapse
Hi Andrey,
I couldn't find your post in the link. could you please repost here in XDA.
Thanks
hammody said:
Hi Andrey,
I couldn't find your post in the link. could you please repost here in XDA.
Thanks
Click to expand...
Click to collapse
I used nailfile to make sim and microsd card thinner.
Sharpen it carefully step by step just to prevent them from becoming broken. Then put them together in the slot(it goes there not so smooth as before but now i have 2 simcards and sd operating together)
Results and rate of sharpening you can see on the photos.
Profit.
But be carefull - All that you do is your own risk.
Just for info I damaged one 64Gb card trying to do this.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sure are Using Mate 7 ??????
the holder not enough Sim Card and Memory Card together ,,,, if Make Thinner will Damage Sim Card or Memory >>
what tools did you Used it to Make Sim and memory more Thinner
Can please post hole this operation with Video link to Watch it
.....
its impassible to do it that ... really ..
i tried sharpen memory card and sim card step by step demaging all of them . i tried after demaged to install them on trayer very high to inside them to solt not installing
I DID IT!
I used nailfile too
try the fire method
stanlawren said:
try the fire method
Click to expand...
Click to collapse
What is fire method?
tasar said:
What is fire method?
Click to expand...
Click to collapse
The fire method involves holding your Sim with a pair of pliers or scissors and heating the plastic part under the chip on a small flame ( matchstick, lighter, candle flame etc) to separate the gold chip from the plastic and gluing the chip to your SD card. Sounds weird but works 100% if you do it well
Thanx, i test it immediately and it seems to work Look at pictures. Now i need the Dual Mate 7
tasar said:
Thanx, i test it immediately and it seems to work Look at pictures. Now i need the Dual Mate 7
Click to expand...
Click to collapse
You're welcome
I tried the lighter method and it actually better than the nail file. The plastic and the glue will melt and you can easily take off the chip.
Hi guys,
I am from Germany and bought a Mo*to*ro*la Moto E in the US. Unfortunately I realized too late that the Tracfone US model does not support German sim cards since there is no sim card slot available. There seems to be a small metal cover where the slot shoud be. Maybe it can be removed?
Some Moto G models seem to have the same restrictions and although the cover can easily be removed there seems to be no way to use any other sim card because the slot is empty (no pins, no reading device or so).
Does anybody of you know if it is possible to remove this cover and use a sim card in the Moto E? I don't want to open and maybe damage the phone if it won't help anyway... On the other hand I have absolutely no idea what to do with a phone that cannot be used in German networks.
You probably also bought this phone because you found a deal for it on mydealz.
If you take a look at the thread over there you can see the Boardshots I took:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is the rear facing side of the board, you can see the soldering spots for a sim card slot there.
I don't have one lying around, but I highly doubt it would help soldering one onto the spot.
The thing is, that the phone is also CDMA, which isn't even supported in Germany.
EDIT: Oh cool, you're living in Speyer! I used to go to school there ;D
That's right, although I did not find this deal on mydealz but on schnaeppchenfuchs. I was one of the early birds on that site who ordered the phone and could not cancel the order in time. So you think that - even if we got such a card slot -it still would not work on GSM or German 3G / LTE? I thought that if one was able to get a "German card slot" and flashed a German ROM, there could be a way to make it work... Too bad if this is not possible. What is the use of a phone that cannot make phone calls?!
What school did you attend? I was born in Speyer but went to Schifferstadt Paul-von-Denis-Gymnasium. Later, after my career in the forces, I went back to Speyer, but now I live in Oberhausen - which is still in your "neighbourhood", as I can see in your profile.
P-A-L-A-D-I-N said:
That's right, although I did not find this deal on mydealz but on schnaeppchenfuchs. I was one of the early birds on that site who ordered the phone and could not cancel the order in time. So you think that - even if we got such a card slot -it still would not work on GSM or German 3G / LTE? I thought that if one was able to get a "German card slot" and flashed a German ROM, there could be a way to make it work... Too bad if this is not possible. What is the use of a phone that cannot make phone calls?!
What school did you attend? I was born in Speyer but went to Schifferstadt Paul-von-Denis-Gymnasium. Later, after my career in the forces, I went back to Speyer, but now I live in Oberhausen - which is still in your "neighbourhood", as I can see in your profile.
Click to expand...
Click to collapse
There is no country specific SIM card slot. The thing is that the radio on this phone is only for CDMA networks. And anyway, the Tracfone "SIM" is also still active somewhere (might be an eSIM) - and I don't think this phone has DualSIM in this configuration. LTE isn't even included in the specs btw
Flashing a German ROM is also impossible right now, cause we can't unlock the bootloader - so if we take a original signed image by motorola it will fail cause the model checks will fail - if we mod the model check it will fail cause the signature is tampered.
You can still use this phone as Remote for home automation, your FireTV (Stick), use it as MP3 Player (it even has a SD Slot). I think I'm gonna use it as offline spotify player at the gym, it'd fit better in my pocket there than my OnePlus One.
I went to FMSG, now I'm studying computer science in Karlsruhe
Ok, I have spent so much time on xda devs that I took for granted that there is an unlocked bootloader for each and every phone in the world! Well, since there seems to be no way to make it work at the moment, the Moto E will become a nice remote (although I do not really have much use for this) or maybe a music player for going jogging... Anyway, thanks for your explanations!
A friend of mine studied in Karlsruhe, too but he quit some months ago to start dual studies somewhere else. Too much mathematics and theory, he told me. Seems to be a really hard piece of work. Well, I could not make all this maths stuff anywhere. I was happy to get along with statistics in political sciences (which was even almost too much mathematics for me).
Dear Respected Members,
I am in a huge problem so I got myself Google Pixel 128GB Phone. After the use of 1 Month the WiFi Dropped. I wonder what happened. The Bluetooth was working fine. The wifi toggle went off completely. Try to slide it to the ON position it slides back to the OFF. Obviously, the phone was out of warranty and I got very much concerned. So ultimately I went to my trusted Phone Repair guy who has professionally opened the phone carefully and applied the heat to the wifi chip so that re-balling happens. Once it was done the WiFi worked but only for 10 - 20 minutes. After so many tries and with no success it was mutually decided to lift the chip and this was happening because the resistor next to the chip was shorting to the ground. It was mutual understanding the WiFi Chip is short. Once the chip was lifted the short was resolved automatically.
THE PROBLEM :
I was unable to find the replacement Chip for the WiFi and now the phone is without Bluetooth and WiFi. I have tried to check AliExpress and even US / UK based websites but couldn't find any solution. If any respected member can help me or sell the chip or find the chip I shall be very thankful. I need guidance in this regard. This is the first phone I am so much messed up in finding the replacement CHIP.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Much Appreciated your help.
did you find this chip?
No still haven't found it. It's been 2 months now.
Maybe try getting a water damaged or physically damaged one off ebay and try a chip swap, might be hard to do a reball with it though since there clearly aren't going to be stencils and the smd components on the bottom side seem to be right in the line of heat fire. Would love to see progress if you move forward
Same Issue with My Pixel.
Both WiFi and Bluetooth is not turning on. Any solutions?
Buy a used pixel with a cracked screen and use screen from your phone and the rest from the other phone.
adnanjabbar said:
No still haven't found it. It's been 2 months now.
Click to expand...
Click to collapse
Still looking for the WiFi chip?
pzr3z said:
Still looking for the WiFi chip?
Click to expand...
Click to collapse
hello dear do you still need that wifi+ bluetooth ic .. i have from my pixel board i can send you
reply if you need
fitguy said:
hello dear do you still need that wifi+ bluetooth ic .. i have from my pixel board i can send you
reply if you need
Click to expand...
Click to collapse
DM'ed you!!!
Wifi marking
Someone can indicate the marking of the chip is not the one that is on top, but the one inside?
vs4vijay said:
DM'ed you!!!
Click to expand...
Click to collapse
I am from pakistan i can send you board via postmail take 15th to 30 days it cost 25$ with delivery
how you pay me
---------- Post added at 05:11 PM ---------- Previous post was at 04:55 PM ----------
vs4vijay said:
DM'ed you!!!
Click to expand...
Click to collapse
it cost 25$ total with shipping to India arrived in 15 to 30th days . i am from Pakistan
vs4vijay said:
DM'ed you!!!
Click to expand...
Click to collapse
hello, you still have a google pixel board, can you send it to me?
sempl911 said:
hello, you still have a google pixel board, can you send it to me?
Click to expand...
Click to collapse
yes i have it cost with shipping 25$ to post you via postmail it arrived 25 to 30 days under ..
how you pay 25$ first
sempl911 said:
Someone can indicate the marking of the chip is not the one that is on top, but the one inside?
Click to expand...
Click to collapse
The problem with wifi was solved by replacing the chip with a non-working motherboard. The chip itself consists of two chips, you can not buy separately. The Chinese write that they can make from 100 pieces. Now google pixel xl is under repair with the same problem, I'll sort it out what's wrong with it.
[Deleted]