[Q] [HELP] Bootloop with usb debugging disabled.... - Galaxy S II Q&A, Help & Troubleshooting

hi guys,
i tried replacing a frameword-res apk file, but unfortunately got stuck in bootloop.
the worst part is i dont have usb debugging enabled, so even after flashing my stock rom (KF1) is still doesnt work.
i tried clearing caches, wiping data and the delvik cache too. no help.
is their still hope??

http://forum.xda-developers.com/showthread.php?t=1108499
jje

but i dont have usb debuggin enabled.....

Related

[Q] USB mode

Hello Android users I have one problem with my phone so i need your advice.
Yesterday i installed new software 4.1.2 For my baltic region SEB i did factory reset before and after also by mistake i did wipe cache partition,
So today when i tried to connect my phone via usb in phone i see that it's are charging but on my computer there are no efects. But when i turn on downloading mode odin software finds the phone and see it.
I tryed reinstalling KIES also turning on debugin USB, reinstalling oldest firmware but there is no changes and my phone cant connect with usb to phone. Have you any advices ? :crying:
Wipe cache has no effect. Make sure your computer-side drivers are ok and check the cable (even if it works in download mode)
Remove the drivers completely if unsure and optionally reinstall them manually.

How to enable usb debugging mode

Hi! hello every one.......I'm new to XDA .... and may be I'm posting my problem in wrong discussion ...... any how I having a problem with my mt6589 Clone S4......
Yesterday I was using my phone and it's working fine but when I restart my phone I gets stuck on adroid logo..... I tried wiping cache / factory rest....but no luck...
I'm googling my problem for last 14 to 15 hours but I don't find any help full information......
I tried Installing custom rom by going to recovery mode .....but it gets unknown error....
I tried spflash tool ..... but it asks for enabling usb debugging mode but my stucks on android logo..... now basically my question is that how to turn debugging mode on when my phone get stucks on android logo.....
I also can't install cwm recovery because it's also ask for enabling a debugging mode.......

[Q] LG P760 not detected in windows with USB debugging ON

I tried to flash another ROM using CWM, but it failed. I did factory reset a few times, deleted cache, dalvik cache and data also a few times and now it is not detected in Windows anymore with USB debugging enabled. All drivers are installed and up to date. Remember that it was easily detected before I tried to flash other ROMs. Ah, I also tried to unlock the bootloader, but I think that it failed as well.
Can anyone help with this issue?

Hard bricked (bootloop)

Hello. I have a bootloop I think...or hard bricked device. I gave a wipe data reset, cache, dalvik cache, after reboot , I enter in the configuration of software . After 5-10 sec. the phone restarts and is blocked on samsung logo. For flashing with new firmware via odin, i don t have chances because usb device is not recognized...I tried other usb cables, I have driver for the device, all methods I tried...still is not recognized. I tried on another PCs. show the same thing. Any sugestions?
Nixetro said:
Hello. I have a bootloop I think...or hard bricked device. I gave a wipe data reset, cache, dalvik cache, after reboot , I enter in the configuration of software . After 5-10 sec. the phone restarts and is blocked on samsung logo. For flashing with new firmware via odin, i don t have chances because usb device is not recognized...I tried other usb cables, I have driver for the device, all methods I tried...still is not recognized. I tried on another PCs. show the same thing. Any sugestions?
Click to expand...
Click to collapse
What Android version?
what rom?
what kernel?
if you expect us to magically know every hardware/software specifics of your phone then you got another thing coming.
Nixetro said:
Hello. I have a bootloop I think...or hard bricked device. I gave a wipe data reset, cache, dalvik cache, after reboot , I enter in the configuration of software . After 5-10 sec. the phone restarts and is blocked on samsung logo. For flashing with new firmware via odin, i don t have chances because usb device is not recognized...I tried other usb cables, I have driver for the device, all methods I tried...still is not recognized. I tried on another PCs. show the same thing. Any sugestions?
Click to expand...
Click to collapse
Are you sure that you've installed the driver correctly? Check in device manager and you should see your phone in device manager (if your PC even detects your phone). You should install the usb driver manually by downloading the samsung usb drivers and then ODIN should be able to detect your phone. If your PC can not even recognise the device, there is a chance that the phone's usb port is stuffed up, so you will have to repair it before fixing your phone.

Galaxy S2 - GT-I9100 - Bricked - Flashing Samsung logo

Hello,
My phone died two evenings ago and now won't get any further than the flashing Samsung logo when booting up. I have tried:
- different batteries,
- leaving the phone with no battery in for hours before retrying
- going into download mode, but device is not recognised by Kies (although does appear under devices and printers as Samsung_Android)
- going into recovery mode and attempting ADB but again device is not recognised by Kies
- going into recovery mode and accessing CWM-based recovery v.6.0.1.4 (CWM-non-touch-6.0.1.4-i91000.zip) but restore fails due to an MD5 mismatch (??)
If the phone is totally tanked that's fine, I'll do a factory reset, but I would if possible at least like to be able to get last few months of photos off the phone before wiping and starting again.
Any suggestions for help?
Thank you :good:
try installing your ROM via recovery from the SD card wipe chache, dalvik, install the kernel you had, wipe cache, dalvik and reboot, worked for me with a similar problem
Flash cwm or trp recovery, and you can mount your internal & sd memory from recovery , then you can copy your files to pc first! Then your can resolve your problem! dont look for phone in devices and printers!!! go to device manager and check your usb cable, usb ports!
Also I had this problem, here is how I've solved it:
Reinstall USB Drivers
Turn off the device
Boot in download mode
Flash a stock firmware via ODIN
Reboot

Categories

Resources