Hey everyone, my 3vo connects just as it should to my laptop. No issues, however when I plug it into my desktop it won't do anything but charge.
I've installed the drivers, it says access denied, even when i plug my SD directly into the computer it will shows the drive but when i click it it just says insert disk into drive j.
At this point I don't know what else to try
If you have an empty CD drive..... Take the cover off, stick the "Evo 3d" inside the empty drive and reboot your computer.
Works for me.
Rootyourdroid.net. My nephews blog.
Try this.
Uninstall the driver's you installed then reboot. Then once your pc boots back up let everything get settle/start up. Then power off your phone and boot into recovery. Then plug your phone into your pc and it should start installing the drivers. Then uplug your phone once the drivers are done installing. Then reboot your pc once more and let everything settle/start up. Then power on your phone and plug it into your pc and it should recognize it. If not then try another USB port on your pc or a different USB cable. Hope this helps.
Locked & Loaded
" Shooter on Deck "
Or that ^^^^^
Rootyourdroid.net. My nephews blog.
laie1472 said:
Try this.
Uninstall the driver's you installed then reboot. Then once your pc boots back up let everything get settle/start up. Then power off your phone and boot into recovery. Then plug your phone into your pc and it should start installing the drivers. Then uplug your phone once the drivers are done installing. Then reboot your pc once more and let everything settle/start up. Then power on your phone and plug it into your pc and it should recognize it. If not then try another USB port on your pc or a different USB cable. Hope this helps.
Locked & Loaded
" Shooter on Deck "
Click to expand...
Click to collapse
I'll try this, thanks
Didn't work. I'm not sure what else to try
Seanc13 said:
Didn't work. I'm not sure what else to try
Click to expand...
Click to collapse
Pm sent
Locked & Loaded
" Shooter on Deck "
Related
Hi all
I have a problem with my hero not being recognized by my PC. This happened after a weekend trip and i charged the phone with iphone USB adapter as i lost my one and now after returning from my trip i connect my hero to my PC to be greeted with the "USB Device Not Recognized" message.
Also my Amon_Ra recovery i used has been wiped and i cant get into recovery or install any rom at all.
I am thinking this might be the same USB brick that affected some Desire owners but i am not sure.
So please if anyone can help me, please do.
Thanks in advance.
fizzle101 said:
Hi all
I have a problem with my hero not being recognized by my PC. This happened after a weekend trip and i charged the phone with iphone USB adapter as i lost my one and now after returning from my trip i connect my hero to my PC to be greeted with the "USB Device Not Recognized" message.
Also my Amon_Ra recovery i used has been wiped and i cant get into recovery or install any rom at all.
I am thinking this might be the same USB brick that affected some Desire owners but i am not sure.
So please if anyone can help me, please do.
Thanks in advance.
Click to expand...
Click to collapse
this happen to me. What i did was switch my phone off, plug in the usb and switched it back on. then wait for windows to say it not recognised. then go to to device and printers and uninstall the drivers for the phone. Disconnect and reconnect the usb back to the phone and it it will pick it up.
Can you try booting in fastboot and tell me if that is recognized?
it still doesnt recognize it in fastboot
fc_Kuro said:
this happen to me. What i did was switch my phone off, plug in the usb and switched it back on. then wait for windows to say it not recognised. then go to to device and printers and uninstall the drivers for the phone. Disconnect and reconnect the usb back to the phone and it it will pick it up.
Click to expand...
Click to collapse
i have tried that and it doesnt help
fizzle101 said:
i connect my hero to my PC to be greeted with the "USB Device Not Recognized" message
Click to expand...
Click to collapse
Sounds like its just a driver issue. Have you tried plugging it in, when you get that message open DEVICE MANAGER,... Find the yellow "!", right click it, uninstall, unplug phone, reboot PC.
.... Then use BTDAG's [Guide] How to Setup Correct Hero Drivers (for x86 & x64 users)
I hav the same problem. In recover mode it works but then turn on the phone, there is no popup options as before. Tried around with drivers but didnt work either. But found a solution which is very convenient. I dont know if it works on other ROM versions but I'm on 2.1 (Villain10).
- Install extended control widget (dont remember where I got it but you can google, it seems I cannot find it on the market)
- Add this widget to the home screen: Menu/Add to Home/Widget/ Extended Control bar (you can choose the size from 1x1 to 1x4) then select "Mass storage" at the bottom, apply.
Now you have a widget to turn on/off USB storage. When you connect Hero to the PC, just click on this widget then the PC will connect to the SD card, and click one more to turn it off.
ok i will give that a try
crk23 said:
I hav the same problem. In recover mode it works but then turn on the phone, there is no popup options as before. Tried around with drivers but didnt work either. But found a solution which is very convenient. I dont know if it works on other ROM versions but I'm on 2.1 (Villain10).
- Install extended control widget (dont remember where I got it but you can google, it seems I cannot find it on the market)
- Add this widget to the home screen: Menu/Add to Home/Widget/ Extended Control bar (you can choose the size from 1x1 to 1x4) then select "Mass storage" at the bottom, apply.
Now you have a widget to turn on/off USB storage. When you connect Hero to the PC, just click on this widget then the PC will connect to the SD card, and click one more to turn it off.
Click to expand...
Click to collapse
that didnt work. o well i guess i am stock with the rom i have there.
fizzle101 said:
that didnt work. o well i guess i am stock with the rom i have there.
Click to expand...
Click to collapse
i've got this problem once and it was as simple as the cable was damaged...
i changed the cable and since then, everything works try that.
robocik said:
i've got this problem once and it was as simple as the cable was damaged...
i changed the cable and since then, everything works try that.
Click to expand...
Click to collapse
i have tried everything. changed the cable, used different pc but nothing works. i think is a hardware problem, something might be broken inside or something like that
Did you ever got this solved? I have the same problem only i use stock rom 2.1 Hero.. driving me nuts ...
baklap said:
Did you ever got this solved? I have the same problem only i use stock rom 2.1 Hero.. driving me nuts ...
Click to expand...
Click to collapse
No i havent and i gave up trying because i dnt think there is a fix for it. if yours is unrooted and the warranty is still valid you should consider returning it to HTC maybe they might replace it
got the same problem. Any solution so far ??
ddotpatel said:
Sounds like its just a driver issue. Have you tried plugging it in, when you get that message open DEVICE MANAGER,... Find the yellow "!", right click it, uninstall, unplug phone, reboot PC.
.... Then use BTDAG's [Guide] How to Setup Correct Hero Drivers (for x86 & x64 users)
Click to expand...
Click to collapse
Did you try that?..... You need to do the reboot PC/Laptop after uninstalling ALL HTC drivers! Then when you reboot PC, plug phone back in, should say "not recognised" again,... then follow BTDAG's guide. T'is definitely a driver issue!
tried flashing 3 roms, modaco, radug and now kimera... none working.
can connect in fastboot, it shows up in device manager as android 1.0
ive tried 3 different usb cables and 4 differet pcs, still there is no response on my phone !!!
using villian rom 10.0 rite now.
okay it boots up into fastboot and fastboot usb shows up on the screen in red,
BUT when i use the "adb devices" command in adb it doesnt show the device,
it is showing as android 1.0 in devices and printers (windows 7)
You need to use....
fastboot devices
....when your are in fastboot.
What happens when you go into your recovery, select "Toggle MS/USB" with USB connected to PC?
okay
fastboot devices command shows some serial number.
then i tried adb remount, it gave an error....
enabling usb-ms with cable attached gives no response
ok i think it might be USB driver like ddotpatel said but i am not sure.
i reinstalled my whole windows 7 to 32bit now instead of the 64bit version i was using before and today i just connected my hero to my PC and windows 7 did its thing and installed the drivers and finally my hero can mount the SD card in my PC again although i kept getting this can perform faster in USB 2.0 port or something like that i didn’t care as long as i can mount my SD card again.
now went into fastboot and used the fastboot device command and i could see my hero serial no. but when i try to flash the amonra recovery i got the permission error (i cant really remember). i tried flashing using the adb method but still no luck.
so i went to market and downloaded rom manager and used it to flash clockwork recovery and now i could boot to clockwork recovery.
from this recovery i can now flash any rom i want and although there are still a few more problems i am glad now that i can flash custom roms again.
the problem i can see so far but i can deal with is
1. i don’t think fastboot commands work even if the phone is detected.
2. SD card mounts at USB 1.1 speed. (i have tried different ports and cable but still the same thing and this is the ports i use for my N1, Desire and my other android phones with USB 2.0 speed)
PS: adb commands for pushing and removing apps is working.
Hope this can be helpful to those experiencing the same problem.
Instead of re-installing your entire OS just use usbdeview to remove the failing drivers.
Also remove any old HTC Sync installs and install the latest version.
For some reason, whenever I plug my X10a into my computer, I get "USB Device Not Recognized", and the phone doesn't charge and I can't mount SD Card or use ADB...
It still charges through the wall socket though.
Anyone know what the problem is?
chris_knows said:
Anyone know what the problem is?
Click to expand...
Click to collapse
Your computer or SD. Uninstall any SE drivers with USBDeview and reconnect which should install new drivers and hopefully sort it out.
Thanks for the suggestion, but it didn't work...I tried connecting to another computer too, and nothing happened. So my only option now is to get a new SD card?
Hi, I am experiencing the same thing and this happened after that I first rooted my phone using superoneclick and then replaced my fonts with arabic fonts.
I hope someone can find the root cause for this error.
chris_knows said:
For some reason, whenever I plug my X10a into my computer, I get "USB Device Not Recognized", and the phone doesn't charge and I can't mount SD Card or use ADB...
It still charges through the wall socket though.
Anyone know what the problem is?
Click to expand...
Click to collapse
I've had off and on problems in this area. Searched around and found this thread.
[GUIDE] ADB, Fastboot, and Nandroid for Noobs
This is what he suggests to solve problems with ADB and USB, (below is ALL the work of the Guide author):
"Im not getting a notification of Android ADB when i plug in my USB"
Why: Your computer has detected your phone but as a protable device and as a storage device.
Fix: This took me a lot of research and time to figure out so this is what your are going to do.
First download USBDeview - Here
Unzip it
Run USBDeview.exe as Administrator
You will see all drivers being used on your computer
Highlight and Uninstall all drivers with the description have HTC Android (Should be 3 of them)
Right Click on the driver and press uninstall
Once done, Unplug your phone and plug it back in
You should now get the notification of the ADB device
Plug in your phone through USB and DO NOT MOUNT IT!!!!!
Your computer should see a new device and try to install Android 1.0 driver (If it doesnt, scroll down to the "Im not getting a notification of Android ADB when i plug in my USB" section)
Let it load
Once it cant find them select "Install drivers from my pc"
The drivers you need are in the Android SDK 1.5r2 folder (C:\android-sdk-windows\usb_driver)
Depending on your OS pick x86 or amd64
You ADB Android Device should now be installed! Good Job
chris_knows said:
Thanks for the suggestion, but it didn't work...I tried connecting to another computer too, and nothing happened. So my only option now is to get a new SD card?
Click to expand...
Click to collapse
Had the same issue my friend. it's the USB socket within the phone that is gubbed. I spent days searching for a solution to no avail.
Why don't you install PC Companion? You can download it from SE. Once you've finished installation, connect your phone and let it detect your phone.
After that, you can uninstall PC Companion. The purpose is to let PC Companion installs all X10 drivers.
Hi guys,
Well it's not the socket because I can charge it normally with wall charger. Regarding the drivers, of course I have tried with PCcompanion and it didn't work.
Thanks...
well i think it can be the socket, becouse, wall charger only uses two wires of the five the socket has, so may be data+ or data- wire is broken. Have you tried with different usb cable?
As the mobile usb socket only has TWO solder points and it is very small socket and the position is not the best, may be some of the five lanes of the socket have unsoldered...and this is why it charges but it cant connect to computer.
It is only an idea..i hope the cause is some driver, mobile configuration (have you tried to reset your phone? ) or the USB cable.
after changing 3 cables I got it to work...
Thank you for your support.
USBDeview is giving me a virus, the .exe is the problem
x10user2011 said:
USBDeview is giving me a virus, the .exe is the problem
Click to expand...
Click to collapse
nvm i downloaded the file from nirosoft.com instead and it works fine.
USB Controllers
Usually if it works on another computer, but not your own, it is because your USB Controllers are messed up. In Device Manager go to Universal Serial Bus Controllers -> right click each one and say Uninstall(your USB mouse/other peripherals will stop working so be warned) -> restart your computer and let it install all the drivers again. Should be working now.
I'm on v2.3 and taking out the battery and SD card and re-inserting it solved the problem for me.
Saz
***
I'm still having this issue. 3 cables 3 computers I think its my port. Charges fine when I plug it into wall or computer.
Just nothing for data its like nothing is happening.
Sent from my X10i using XDA App
When I first got my phone the usb worked now when I plug it into the computer the computer says usb not recognized. It is coming up as an unknown device and the phone isn't even giving me the option to mount as a disk drive.
I have usb debugging enabled and the drivers are installed but I tried re installing them but the htcdrivers.exe isn;t working. I click the .exe but nothing happens.
jj71787 said:
When I first got my phone the usb worked now when I plug it into the computer the computer says usb not recognized. It is coming up as an unknown device and the phone isn't even giving me the option to mount as a disk drive.
I have usb debugging enabled and the drivers are installed but I tried re installing them but the htcdrivers.exe isn;t working. I click the .exe but nothing happens.
Click to expand...
Click to collapse
Check the cable, it could be damaged, use a different cable to verify and check the phones USB port as well, blow some compressed air into it if it needs cleaning, you can get the drivers from hasoons tool, uninstall and reinstall, that may help.
Sent from an Amaaaaaazing place :-D
The wire is a little messed up but I don't think it's the wire because it can hold a charge.
I uninstalled and re installed and it still says usb not recognized. In device manager it just says unknown device
jj71787 said:
The wire is a little messed up but I don't think it's the wire because it can hold a charge.
I uninstalled and re installed and it still says usb not recognized. In device manager it just says unknown device
Click to expand...
Click to collapse
I've found that there are some wires that only charge the phone, and does not carry data. You should try a different cable, preferably the one that came with the phone.
it is the one that came with the phone but the dog chewed it a little I guess I'll try and get another one on amazon
I also had an issue with the cable that came with my amaze as well on my older laptop. I tried the usb cable that came with my mytouch 4G will fortunately works with my amaze and I had no problems. I'm guessing the newer usb cable is not compatible with my laptop or something.
jj71787 said:
When I first got my phone the usb worked now when I plug it into the computer the computer says usb not recognized. It is coming up as an unknown device and the phone isn't even giving me the option to mount as a disk drive.
I have usb debugging enabled and the drivers are installed but I tried re installing them but the htcdrivers.exe isn;t working. I click the .exe but nothing happens.
Click to expand...
Click to collapse
http://hotfile.com/dl/141731525/b70ebac/HTCDriver3.0.0.007.exe.html these are the drivers
II. IF DRIVERS JUST WON’T AUTOMATICALLY INSTALL, DO IT MANUALLY HERE
1. A program called PDANet (used normally to allow you to wired tether your phone’s internet to your computer) can be used to install the ADB drivers for a lot of phones. Download it and follow it’s instructions to install it then go back to step 8 in Section I above and see if that gets you the serial number (if you do, you are all done). If not, then use one of the device specific programs below in step 2.
PDANet
2. Download your phone’s driver’s below then goto your Device Manager on your computer, look for the phone and click on it. Then click Properties > Update Driver > Browse > Let me pick > Computer > Have Disk > Browse > Then select the driver you downloaded below:
original post here http://theunlockr.com/2009/10/06/how-to-set-up-adb-usb-drivers-for-android-devices/
my phone will not be recognized by the computer no matter what i do. It recognizes my friends i777 just fine in odin and as a storage device so it isnt my drivers. With mine it only makes the connection sound and says device drivers failed to install. I am running shostock 3, philz kernel and windows 7. I have tried everything and i am out of ideas, please help. thanks
Install Kies fresh, install android sdk and update it, reboot, try different usb ports.
Also u have to disable usb debugging and let it install those drivers, enable it and let it install those drivers and boot into download mode and do a regular reboot and let it install those. Always worked for me after following those steps.
If he's friends phones works. Then I think it's the phone usb. My own phone has the same issues but my usb on phone is messed up. Says charging while its not chargin and that happens I get the whole Device not recognize and fail to install. Try cleaning your usb with 99% Isopropyl of the instructions above this post don't work out.
chibixzero said:
If he's friends phones works. Then I think it's the phone usb. My own phone has the same issues but my usb on phone is messed up. Says charging while its not chargin and that happens I get the whole Device not recognize and fail to install. Try cleaning your usb with 99% Isopropyl of the instructions above this post don't work out.
Click to expand...
Click to collapse
I will try this. I appreciate the help
I tried the suggestions.....
I downloaded the samsung drivers correctly because my pc recognizes any other samsung but no matter what i've tried it says usb device not recognized for my galaxy. Im stuck in a boot loop and the only thing i can access is download mode when i plug it in the computer. I can't access anything with the battery in, it just flashes the galaxy logo over and over. Thank you for you time in advance
My computer won't recognize my gs4. I have the latest drivers installed and have re-installed many times. The only thing it does when I plug it in is charge. It sometimes says windows is searching for the latest driver when I plug it in, but it then it then says it was unplugged. ODIN did manage recognize it once and that was enough for me too root it and then flash the stock kernel back on. My phone then soft-bricked at the padlock after some rom flashing and I had to go to my friends house to flash it back to stock. Is there anything else I can do?
Am I the only one with this problem?
Does it give you the error "USB device not recognized"? If so there are some fixes for it. I fixed my friends when I sold him my S3. His PC did it.
Yes, a couple of times it did that. Now it just does nothing.
If you try and remove the device from your device manager does it do anything?
Right click on computer and go to properties to get to the device manager.
What would it be named? I looked through all the usb stuff and everything else and couldn't find anything that would be my device.
d03p3yy said:
What would it be named? I looked through all the usb stuff and everything else and couldn't find anything that would be my device.
Click to expand...
Click to collapse
It would be any device with a yellow Triangle and an Exclamation point on it. Also uninstall KIES and your Samsung USB drivers, then reboot. Get updated USB drivers from the S4 link in my signature.
It did the same thing and game me the unknown device thing. It also said that the device malfunctioned. I guess ill just try again.
d03p3yy said:
It did the same thing and game me the unknown device thing. It also said that the device malfunctioned. I guess ill just try again.
Click to expand...
Click to collapse
Ok let's try this fix first.
1. Remove phone from PC and shutdown and remove battery to shut off phone.
2. Plug USB cable into PC and phone.
3. Put battery back in and boot phone but…
4. As the phone boots, hold down Volume up and down and don't let go until you see you are in safe mode on the phone. It should say safe mode on the front screen.
5. This should reboot your phone into download mode and install drivers that are needed.
6. Your PC will indicate and recognize the phone.
7. Now if you check the notification drop down on your phone you should see USB/MTP options there in the notification area. MTP should be checked.
Still no luck. Maybe later I will re-install windows or just re install every driver on my computer.
The other fix to try is listed below.
1. Uninstall any previous instance of Kies/USB driver
2. Download the latest Kies, specific to your S3.
3. Download Samsung USB drivers 1.4.6.0 (I've tried newer versions but they all failed)
4. REBOOT
5. Disconnect from internet (VERY IMPORTANT!!! - forcing Windows to install local drivers ONLY)
6. With the phone disconnected, install Kies + USB drivers downloaded in steps 2,3
7. Connect the phone and let Windows install the drivers.
8. Reestablish the internet connection.
---------- Post added at 08:33 PM ---------- Previous post was at 08:31 PM ----------
If that doesn't work PM my your system specs IE RAM, CPU, and HDD Space and current OS.
The computer doesn't do anything when I plug the phone in. The only thing that starts to happen is that the phone starts charging.
d03p3yy said:
The computer doesn't do anything when I plug the phone in. The only thing that starts to happen is that the phone starts charging.
Click to expand...
Click to collapse
Send me the PM with the requested info.
I'm not really requesting anymore info. I am just going to re install windows because I have done so much stuff to this install that it is time for a new one.
Bump
Any luck? My computer won't recognize my phone either anymore.
PeterifficX said:
Bump
Any luck? My computer won't recognize my phone either anymore.
Click to expand...
Click to collapse
have you done the simpliest thing like reboot your computer?
PeterifficX said:
Bump
Any luck? My computer won't recognize my phone either anymore.
Click to expand...
Click to collapse
My experience with the "Device Malfunctioned" thing was due to a bad cable. It would charge, but wouldn't allow me to connect.
You might also try a different USB port on your computer. Often times the connectors on the back of a desktop system, which are hardwired to the motherboard, work more reliably than the front ones.