Last day I gonna to Odin back to sotck ED05, but my Window Xp SP3 have an virus infection, so I decided to Reinstall my Window SP3.
After I install, okie, I install Samsung driver, and download Odin in forum ( v1.7 ),
Okie, i'm going to connect my USB cable and open Odin, and have found COM port
After that, atlas_v2.2.pit, and ED05_FROYO_REL.tar.md5, Start, but....keep on "Setup Connection...", and "Set Partition" on Odin, and...stuck at this
After waiting about 40 minutes, I disconnect my cable, and try to re-Odin, but... my PC can't recognize after plug-ins, and can't connect via Odin
Try to restart PC, and re-connect, and my PC recognize afterall, but When I try to Odin, it just say " Setup Connection...". And sometimes my PC didn't recognize driver USB
Now, my phone can't connect to Charger ( but I can go to Download Mode without battery, but it useless because my Odin struck at "Setup Conntection..." )
What should I do now ?
Edit: use HEIMDALL to flash again, no thing happened. I use EB01 in this thread
http://forum.xda-developers.com/showthread.php?t=1026746
First times, try HEIMDALL, it's going to " Failed to access device. Error : -12 "
Second, try again, it's going to " Uploading PIT file", "Uploading factory filesystem", and...stop, nothing happened ( Process Bar is 0% )
Third, again, it's say Failed to retrieve config descriptor.....
So, Should I buy new phone ?
try odin 1.3 instead of 1.7
droidstyle said:
try odin 1.3 instead of 1.7
Click to expand...
Click to collapse
Agreed use Odin 1.3 or 1.7 or vice versa...I use vista home basic edition never had a problem except when I first got into flashing..after much trail and error of trying generic drivers, fascinate drivers and nexus drivers, as well as bunch of driver mender programs, it was as simple as uninstalling and re-installing my Samsung drivers...never had a problem since?! if your phone was recognized before I would try UN installing and re installing those same drivers...don't forget to reboot after...I hope it helps...but if you can get to download mode you're far from fully bricked...if that makes you feel better?! You will get your phone up and running again.
Sent from my SCH-I500 using XDA App
efan450 said:
Agreed use Odin 1.3 or 1.7 or vice versa...I use vista home basic edition never had a problem except when I first got into flashing..after much trail and error of trying generic drivers, fascinate drivers and nexus drivers, as well as bunch of driver mender programs, it was as simple as uninstalling and re-installing my Samsung drivers...never had a problem since?! if your phone was recognized before I would try UN installing and re installing those same drivers...don't forget to reboot after...I hope it helps...but if you can get to download mode you're far from fully bricked...if that makes you feel better?! You will get your phone up and running again.
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
No, I've try Odin v1.3 and the same result: struck at "Setup Connection..."
Now my phone can't power on, and can't connect battery charger
The only thing I can do is put my Fascinate in Download Mode
I think I have an half - bricked
BIBUBO BCJ said:
No, I've try Odin v1.3 and the same result: struck at "Setup Connection..."
Now my phone can't power on, and can't connect battery charger
The only thing I can do is put my Fascinate in Download Mode
I think I have an half - bricked
Click to expand...
Click to collapse
If you want my opinion, from what it sounds like,I think it's a PC issue and not the phone. You say you can get to download mode..that's all you need to get it fixed. you just need to be able to enter download mode. you said you just re installed your os on your Pc due to a possible virus..I think that may be where your connectivity issues are stemming from the PC, not the phone...did you try reinstalling the fascinate drivers again?...I mean re download them and reinstall the freshly downloaded drivers?
Sent from my SCH-I500 using XDA App
efan450 said:
If you want my opinion, from what it sounds like,I think it's a PC issue and not the phone. You say you can get to download mode..that's all you need to get it fixed. you just need to be able to enter download mode. you said you just re installed your os on your Pc due to a possible virus..I think that may be where your connectivity issues are stemming from the PC, not the phone...did you try reinstalling the fascinate drivers again?...I mean re download them and reinstall the freshly downloaded drivers?
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
thank, I think exactly like you ^_^. I'wll try again in fresh-another-PC , and waiting for something new
EDIT: No result, Try many times, struck on "Setup Connection..."
EDIT2: Ater fresh Window and install driver, struck at "param.lfs" ( when uncheck in Re-Partition, If I checked it, Odin also struck at "Setup Connection..." or "Re-Partition Failed" )
EDIT3: Complete(Write) operation failed. Odin also remove COM port
---------- Post added at 08:41 AM ---------- Previous post was at 08:00 AM ----------
anyone, please help me >_<
---------- Post added at 08:53 AM ---------- Previous post was at 08:41 AM ----------
EDIT4: Okie, check in Re-Partition, and .pit file, Set Partittion okie, but now I'm stuck at param.lfs
I'll try another USB port
BIBUBO BCJ said:
thank, I think exactly like you ^_^. I'wll try again in fresh-another-PC , and waiting for something new
EDIT: No result, Try many times, struck on "Setup Connection..."
EDIT2: Ater fresh Window and install driver, struck at "param.lfs" ( when uncheck in Re-Partition, If I checked it, Odin also struck at "Setup Connection..." or "Re-Partition Failed" )
EDIT3: Complete(Write) operation failed. Odin also remove COM port
---------- Post added at 08:41 AM ---------- Previous post was at 08:00 AM ----------
anyone, please help me >_<
---------- Post added at 08:53 AM ---------- Previous post was at 08:41 AM ----------
EDIT4: Okie, check in Re-Partition, and .pit file, Set Partittion okie, but now I'm stuck at param.lfs
I'll try another USB port
Click to expand...
Click to collapse
Okie, Problem is solved... It passed and is fired up !!!!! Again, Fascinations !!!
Thank you !!!
Glad to hear its working again such a bad feeling when your phone wont turn on.
Related
Hello all,
Ive got Kies and Odin3 v1.85 for my galaxy s2 and when i put my sgs2 into download mode, odin 3 does not find my phone. but when i turn the phone on and then open odin 3, it displays a com port???
Ive tried reinstalling kies several times with no luck!
Any help would be gladly appreciated.
thanks,
Alex
Weird! Try closing kies altogether. That includes exiting it from the system tray.
If that doesn't help, see if you have USB debugging on under settings / applications / development. If it's off turn it on.
Sent from my GT-I9100 using XDA Premium App
sxi200 said:
Weird! Try closing kies altogether. That includes exiting it from the system tray.
If that doesn't help, see if you have USB debugging on under settings / applications / development. If it's off turn it on.
Sent from my GT-I9100 using XDA Premium App
Click to expand...
Click to collapse
what do u mean system tray?
I do have usb debugging on.
thanks,
Alex
Even though kies is not open, it is still running. It usually starts automatically when PC boots up.
Not sure what you use, but on windows xp in the bottom right corner where the time is, you can see what is running. Sometimes you need to expand it to see what else is running. Or even press ctrl+alt+del and in task manager kill kies process from there.
Might not help but worth a try.
Sent from my GT-I9100 using XDA Premium App
alex4659 said:
Hello all,
Ive got Kies and Odin3 v1.85 for my galaxy s2 and when i put my sgs2 into download mode, odin 3 does not find my phone. but when i turn the phone on and then open odin 3, it displays a com port???
Ive tried reinstalling kies several times with no luck!
Any help would be gladly appreciated.
thanks,
Alex
Click to expand...
Click to collapse
u only need kies to install the drivers after that dont use the program kill all processes by using ur task manger open odin prior to pluggin in ur usb lead once in download mode then connect it then u should be able to see the yellow com box but maybe try a reboot of your comp/laptop which sure u already done
I didnt think Kies was supposed to be running full stop when your using odin??
Demon_man said:
I didnt think Kies was supposed to be running full stop when your using odin??
Click to expand...
Click to collapse
its not they both will conflict with each other hence reason i mention in my prev post to only use it to grab drivers then kill program crap anyways lol
thanks for yalls help!
im still working on this fyi
cheers,
Alex
Odin3 still my phone in download mode?
i tried uninstalling and re-installing odin3 again twice with no luck?
if you have any imput on what i should do, please let me no?
thanks,
Alex
Keep Driver SGS2 and Unstall Kies, and try
Or
Use Odin in different Version
Or
if nothing then use another PC and Try
javasaad said:
Keep Driver SGS2 and Unstall Kies, and try
Or
Use Odin in different Version
Or
if nothing then use another PC and Try
Click to expand...
Click to collapse
tried this: http://forum.xda-developers.com/showthread.php?t=1220045
but did now work! im using windows 7 on a Mac using parallels desktop and this is really all i've got at the moment!
any other suggestions?
thanks for your help
ODIN3 Problem
Hi yall,
Noob here im sorry but I was wondering if you guys can help me out.
I am trying to root my SGS2 and/or update firmware to ICS using ODIN and various ROMS.
I have the Samsung drivers and unistalled KIES since iv read in some forums it can conflict with ODIN. ODIN does recognize my phone as a COM.
I am having a problem with the ODIN3 software both v1.85 and v1.83. For some reason that I cant figure out, when I try to load the PDA file, I find the file and add it but it will not show the file in the PDA box (its like it wont allow any file to be loaded)
I tried going ahead and flash the phone assuming the file loaded with the PDA tick box checked...and nothing (doing everything by the books here i.e. using USB debugging, connecting the phone only when in download mode etc.)
Appreciate the help.
Tnx
Phone details:
Bought in Austria:
PDA: I9100XXKI1
Phone: I9100ATOKI1
CSC: I9100ATOKI1
Try to uninstall samsung drivers and install again. Works for me
078gregory said:
Try to uninstall samsung drivers and install again. Works for me
Click to expand...
Click to collapse
Thx for the quick response, I have tried that and still I am not able to see the the PDA file in the box on the ODIN window.
GustavGG said:
Thx for the quick response, I have tried that and still I am not able to see the the PDA file in the box on the ODIN window.
Click to expand...
Click to collapse
Are you using Windows Vista or Windows 7? Try running Odin as administrator. (right click > run as administrator)
GustavGG said:
Hi yall,
Noob here im sorry but I was wondering if you guys can help me out.
I am trying to root my SGS2 and/or update firmware to ICS using ODIN and various ROMS.
I have the Samsung drivers and unistalled KIES since iv read in some forums it can conflict with ODIN. ODIN does recognize my phone as a COM.
I am having a problem with the ODIN3 software both v1.85 and v1.83. For some reason that I cant figure out, when I try to load the PDA file, I find the file and add it but it will not show the file in the PDA box (its like it wont allow any file to be loaded)
I tried going ahead and flash the phone assuming the file loaded with the PDA tick box checked...and nothing (doing everything by the books here i.e. using USB debugging, connecting the phone only when in download mode etc.)
Appreciate the help.
Tnx
Phone details:
Bought in Austria:
PDA: I9100XXKI1
Phone: I9100ATOKI1
CSC: I9100ATOKI1
Click to expand...
Click to collapse
you sure it's a tar file your putting into pda and not zip
djseaneq said:
you sure it's a tar file your putting into pda and not zip
Click to expand...
Click to collapse
Im using vista and I am running as admin,
the file is a tar.md5 file what can I do?
PS: Once iv added the file the pda box checks I press start and I get:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<OSM> All threads completed. (succeed 0 / failed 1)
I still cant see the file right next to the pda box once ive added the file
have you tried using task manager and stopping kies like other posters have suggested.
Yes I did try that, I have kies uninstalled but still have the samsung drivers and still no luck.
What else can I do?
you tried opening odin first then putting phone into dl mode maybe try different usb ports or redownloading drivers.
good afternoon,
I have to installed the lewa rom and I want return back to a stock rom.
I tried to use odin but when I click on start I get this message:
cannot open the usb serial port. code: 32
Someone can help me?
I used odin in the past several times without any problem
I make the hard reset on phone and the wipe cache too.
thanks
is your phone being recognized by odin correctly?
---------- Post added at 10:35 PM ---------- Previous post was at 10:28 PM ----------
if the answer is yes, then all you have to do is shutdown samsung kies before flashing with odin!
Both programs get in conflict!
kies is jealous of odin!
--------------------------------------------------------------------------------
press "THANKS" if i helped
You might be missing the USB drivers inside the phone.....reflash the ROM and try again
Herpderp Defy.
coluichepensa said:
good afternoon,
I have to installed the lewa rom and I want return back to a stock rom.
I tried to use odin but when I click on start I get this message:
cannot open the usb serial port. code: 32
Someone can help me?
I used odin in the past several times without any problem
I make the hard reset on phone and the wipe cache too.
thanks
Click to expand...
Click to collapse
try again with another USB port or use another PC
Sorry for my bad English
SOLVED. There were some Kies processes working in background even if the program was clossed. I terminated those processes and I flashed with odin without anyother problem.
that´s what i said! good
--------------------------------------------------------------------------------
Its free! hit tanks if i helped
Hello guys,
I really really need your help, I have spend like two weeks reading articles and possible solutions to my problem and none of them worked.
My cell is the international version GT-I9100 and my PC has W7 Ultimate installed
I have my phone in USB debug mode and have installed USB drivers with KIES
2 weeks ago I was able to get to download mode by using the 3 buttons method with no problems... so I decided to try to install the latest ICS I9100XXLPQ with ODIN
Odin did recognized the cellphone and the yellow label appeared and show the message accepted... so far so good, put the I9100XXLPQ file in PDA, check the Auto Reboot and F. Reset Time options and hit the Start button but the problem started there.... it just sits at setup connection and wont do a thing. wait for more than 30 mins and nothing just sits there.
So I unplugged the cellphone from the cable thinking that it would be ok since Odin didn´t started with the flashing process (or at least that what i thought)... there´s the problem, now my cellphone does not came up and I´m not even able to get into download mode. I just get a black screen (see attachment)
I have tried with the 3 buttons, with One-Click Unbrick and with the Jig cable and none of them worked, I just keep getting the same screen.
(by the way... i tried with One-Click Unbrick but it still saying that the drivers are not installed properly so it keep installing the drivers over and over and I have not been actually able to use it.)
Odin is still able to recognized the cellphone so I tried to re-flash the cellphone doing the same thing this time it passed the connection setup and seems that it will worked but after 5 to 10 mins it failed but with no error message. I guess that it wont do anything since the cell is not in download mode.
Any ideas or suggestions would be more than appreciate!
Regards...
I once had the same problem. When odin sees the mobile even if its not in download mode. This means its connected but the bootloader is broken.
To fix this u need to use some program called hamedal or hamidal or something. I used it to unbrick my galazy tab. you can flash the boot section (bootloader image) manually thru it and it will fix your mobile.
Try to google about it and how to use it. If you don't find anything. Pm me and I will try to help u .
Sent from my GT-I9100 using xda premium
try to use a JIG,it will force the phone to enter the download mode
fearkillerr said:
I once had the same problem. When odin sees the mobile even if its not in download mode. This means its connected but the bootloader is broken.
To fix this u need to use some program called hamedal or hamidal or something. I used it to unbrick my galazy tab. you can flash the boot section (bootloader image) manually thru it and it will fix your mobile.
Try to google about it and how to use it. If you don't find anything. Pm me and I will try to help u .
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
I think that you are taking about Heimdall
One Click Unbrick is the same thing.... (Heimdall One-Click project)
I tried that already... but thanks
I haven't worked much with i9000 or i777 to figure out heimdall compatibility. Your option is Odin right now.
Your only solution is a USB JIG.
shesho07 said:
I think that you are taking about Heimdall
One Click Unbrick is the same thing.... (Heimdall One-Click project)
I tried that already... but thanks
Click to expand...
Click to collapse
Just open that program, install the usb drivers for it while connecting your phone and try to flash the zimage.img into the phone manually. I believe it will work. I've fixed many bricked galaxy devices with that.
Sent from my GT-I9100 using xda premium
Hey all.... Long time lurker and reader here. I usually find all my answers through previous posts but I'm a little stuck here and cannot find the appropriate guide to help me out.
I have a GT-P7510 which has always been rooted and has had a few ROM lifes, so I'm no stranger to CWM and download mode, Odin Etc... (But I'm certainly no expert by any means)
Last week I tried a flash and ended up bricked. (Soft brick) I tried several times to flash back to stock with the current as well as last known good firmware from SamFiles, but ODIN would fail partially through the flash. I got the message "Can't open the specified file. (Line: 1876)", so I checked here: http://forum.xda-developers.com/showthread.php?t=1370433 But that didn't help me.... And now, my tab is not recognized in any of the laptops or desktops I plug it into. (WinXP, WinVista, Win7 -- Kies drivers all fresh from Samsung)
I can get into Download mode. I can get into recovery, (I have done a wipe/re-format Factory reset in recovery a few times now) but nothing seems to help. I'd be willing to learn how to probe around with ADB, but haven't tried for lack of a driver being recognized. I have a few Linux boxes here at the house and haven't tried them. I wouldn't know where to start if the device was recognized by them.
Any suggestions on how to get the device recognized? Or, maybe what I can do from CWM (Sideload?). or even if I get an ADB connection from one of my linux boxes, would I be able to re-flash the firmware?
Thanks in advance.
first thing is to check your cable, then your pc drivers, if u can get in to cwm, try a new cable and mount the usb from there, put in a new rom, and flash it.
hope this helps, dude. Good luck.
If you foobarred the tab by a failed flash using Odin as you described logic would dictate that it has absolutely nothing too do with pc drivers suddenly not being good if they worked before, same for pc and cable.
You need to reinstall using Odin as you say you can get into download, using a .pit file, ticking repartition, and a stock firmware file. If that works you can go on to play another day....
If you're not sue about stuff you're using, good version of Odin (not all versions flash the 7510 properly) for 7510 and drivers are here http://forum.xda-developers.com/showthread.php?t=1518895
I'll put a .pit file up here when I get to a computer and get yourself a STOCK rom from samfirmware to flash thro Odin and you should be good to go
Sent from my GT-P7510 using XDA Premium HD app
stinky73 said:
If you foobarred the tab by a failed flash using Odin as you described logic would dictate that it has absolutely nothing too do with pc drivers suddenly not being good if they worked before, same for pc and cable.
You need to reinstall using Odin as you say you can get into download, using a .pit file, ticking repartition, and a stock firmware file. If that works you can go on to play another day....
If you're not sue about stuff you're using, good version of Odin (not all versions flash the 7510 properly) for 7510 and drivers are here http://forum.xda-developers.com/showthread.php?t=1518895
I'll put a .pit file up here when I get to a computer and get yourself a STOCK rom from samfirmware to flash thro Odin and you should be good to go
Sent from my GT-P7510 using XDA Premium HD app
Click to expand...
Click to collapse
That sounds great man.... THANKS! I do have the correct Odin, and I have a clean firmware from SamFiles. But I have tried looking for a pit for the 7510 and haven't had much luck. If you could post one, I'd be forever in your debt.
Here y'are
stinky73 said:
Here y'are
Click to expand...
Click to collapse
Thank you brother! I'll report back in a day or so.
Good luck!
sent from my still superb Google I/O 7510
stinky73 said:
Good luck!
Click to expand...
Click to collapse
Back to the drawing board I guess... I have a new cable on-order. However I was able to get the driver loaded by utilizing the dreaded "Plug - Unplug" routine several times until I just got lucky.
Odin can see it as COM5, and I used your pit (Again, TY!) I tried using the "P7510XABLPL_P7510UELPL" file I got from Samsung, but Odin is locked up at this point. (See screen cap)
I'll keep beating my head against this wall
:silly:
Odin 1.85 is just about the most random version of the prog when it comes to the 7510...
Try the one I have posted below (v1.3) it has never let me down (whereas 1.85 often has done to me what it is doing to you)
Worth a try
stinky73 said:
Odin 1.85 is just about the most random version of the prog when it comes to the 7510...
Try the one I have posted below (v1.3) it has never let me down (whereas 1.85 often has done to me what it is doing to you)
Worth a try
Click to expand...
Click to collapse
Yes. Sorry I forgot to mention that.
I saw your other post and did grab that 1.3 version. However, When I get the drivers loaded (When windows "sees" the tablet after plugging and unplugging numerous times) It will show up as COM3 or COM5 in any version of odin Except 1.3.
I tried various versions of Odin and when they all see the com port, 1.3 does not. Truly bizarre to me.... With 1.85 and or 1.7 I was successful in just loading the pit file, but if I try to load a PDA, it just freezes.
I installed Android SDK and started playing with ADB yesterday. I haven't had much success in addressing the Tablet. Also, I cannot get into recovery any more. It appears that the tablet is stuck in download mode, as if it's in a loop. ('the device states that it's downloading even after a reboot with no cable attached.)
My new cables will be here in a couple of days. Until then, I'm letting the battery die completely and will try again with the new cables.
P-tek said:
Yes. Sorry I forgot to mention that.
I saw your other post and did grab that 1.3 version. However, When I get the drivers loaded (When windows "sees" the tablet after plugging and unplugging numerous times) It will show up as COM3 or COM5 in any version of odin Except 1.3.
I tried various versions of Odin and when they all see the com port, 1.3 does not. Truly bizarre to me.... With 1.85 and or 1.7 I was successful in just loading the pit file, but if I try to load a PDA, it just freezes.
I installed Android SDK and started playing with ADB yesterday. I haven't had much success in addressing the Tablet. Also, I cannot get into recovery any more. It appears that the tablet is stuck in download mode, as if it's in a loop. ('the device states that it's downloading even after a reboot with no cable attached.)
My new cables will be here in a couple of days. Until then, I'm letting the battery die completely and will try again with the new cables.
Click to expand...
Click to collapse
That's an odd one for the download reboot.... As normally you should get choice of recovery or download as first step... Would tend to signal a failed download
I've often seen people say here "have you tried a different computer?" and scoffed a bit at that but maybe in your case...
However to be scientific you should only change one variable at a time so as to know where the result comes from, so start with the cable and we can see where you go from there
sent from my still superb Google I/O 7510 (xda hd)
Victorious
stinky73 said:
That's an odd one for the download reboot.... As normally you should get choice of recovery or download as first step... Would tend to signal a failed download
I've often seen people say here "have you tried a different computer?" and scoffed a bit at that but maybe in your case...
However to be scientific you should only change one variable at a time so as to know where the result comes from, so start with the cable and we can see where you go from there
sent from my still superb Google I/O 7510 (xda hd)
Click to expand...
Click to collapse
Thank you again for all your help!
My new cables arrived and appeared to be at the center of the issue. Once plugged in, the drivers properly loaded and I was successful with Odin. I used the pit you gave me for a re-partition, and the UELPL PDA from Samfiles.
It was initially stuck in a boot loop after the successful flash, but I was able to reboot to recovery, F/R, wipe and clean it up and now it's ALIVE! :victory:
Yeeee. Haaaaah!!!!
sent from my still superb Google I/O 7510 (xda hd)
Guys can anyone help me please?
I was trying to update my p765 firmware by using offline fix method.
I did every step correctly all drivers installed exactly as in the tutorial.
But flashing stopped at around 17-20% saying communication problem with pc and phone thereby my phone got stuck in software upgrade mode and won't come out of it.I tried it again and again with no success..
Please help me with my 2 days old phone.
FLASHING ERROR AT THIS POINT? If you have installed JB before then your flashing may stop at 4% to 14%. This may be due JB rom already installed before or due to driver not completely installed for "SW Upgrade Mode".
WORKAROUND: Cancel flashing by exiting LG Update Tool. Phone should be still in SW Upgrade Mode, Remove USB Cable, wait 10 seconds, Insert USB cable again and let all drivers install for this mode. The device manager should look LIKE THIS SCREENSHOT. START AGAIN FROM STEP 6 (Read about Post-JB Issue)
I have already jb ... When i buyed this phone was already jelly bean... What shoul i do? My phone go in SW mode Luke a charm. you forget to upload the screenshot
Sent from my Galaxy Nexus using xda app-developers app
---------- Post added at 10:48 PM ---------- Previous post was at 10:47 PM ----------
Sent from my Galaxy Nexus using xda app-developers appim tryng your steps
garik345 said:
FLASHING ERROR AT THIS POINT? If you have installed JB before then your flashing may stop at 4% to 14%. This may be due JB rom already installed before or due to driver not completely installed for "SW Upgrade Mode".
WORKAROUND: Cancel flashing by exiting LG Update Tool. Phone should be still in SW Upgrade Mode, Remove USB Cable, wait 10 seconds, Insert USB cable again and let all drivers install for this mode. The device manager should look LIKE THIS SCREENSHOT. START AGAIN FROM STEP 6 (Read about Post-JB Issue)
Click to expand...
Click to collapse
I had ics when i bought it and was trying to install jb.Tried everything all drivers perfectly installed including the adb fastboot ones.
Just unable to flash it beyond maximum 21%...i m sending it to the service centre..give up