Related
Hi all. My Droid x2 is stuck on the boot screen with the Motorola logo and won't go past that. I attempted to flash Speedy v6, and this caused this. I also tried fastbooting by going into Android Recovery and wiping cache/format data, and it still does not work. Please help me with this situation. Thanks
Try sbf if you can't get back into bootstrap recovery.
Sent from my DROID X2 using Tapatalk
itskevin94 said:
Hi all. My Droid x2 is stuck on the boot screen with the Motorola logo and won't go past that. I attempted to flash Speedy v6, and this caused this. I also tried fastbooting by going into Android Recovery and wiping cache/format data, and it still does not work. Please help me with this situation. Thanks
Click to expand...
Click to collapse
If you made a nandroid backup before you broke it, turn phone off and plug it in, hope it boots into bootstrap recovery, then restore backup. If no backup or doesn't boot into bootstrap, you will have to sbf
Sent from my DROID X2 using XDA App
Ihad the same problem but turned phone back on with power and down volume button on at same time until you get into the point where you can get into your android recovery. Remember to hit both volume buttons at same time when you get to the android and triangle. Wipe data factory reset and re boot and it worked for me. If not then you will have to sbf again. I was ready to sbf but this worked instead and saved some time.
---------- Post added at 07:11 PM ---------- Previous post was at 07:09 PM ----------
EvilTim said:
If you made a nandroid backup before you broke it, turn phone off and plug it in, hope it boots into bootstrap recovery, then restore backup. If no backup or doesn't boot into bootstrap, you will have to sbf
Sent from my DROID X2 using XDA App
Click to expand...
Click to collapse
If you have a backup you can get to it with the stock recovery.
Travisdroidx2 said:
Ihad the same problem but turned phone back on with power and down volume button on at same time until you get into the point where you can get into your android recovery. Remember to hit both volume buttons at same time when you get to the android and triangle. Wipe data factory reset and re boot and it worked for me. If not then you will have to sbf again. I was ready to sbf but this worked instead and saved some time.
---------- Post added at 07:11 PM ---------- Previous post was at 07:09 PM ----------
If you have a backup you can get to it with the stock recovery.
Click to expand...
Click to collapse
How do u get to a backup using stock recovery?
Travisdroidx2 said:
If you have a backup you can get to it with the stock recovery.
Click to expand...
Click to collapse
Really now?
That would be nice.
Sorry must be a noob mistake. I thought while I was in there to clear data/factory thought I also seen a spot to load zip from SD. Guess I was wrong you all know more than I do I have only been at it now for a couple of months
Pretty sure there is an option to apply update zip but my backups aren't named update and they aren't zips so that poses a problem __
I see I never tried I just figure that yo ucould get to it like you do with recovery app. I did get bootloop when flashing to 2.3.4 and thought I was going to have to sbf again. However starting up in backup recovery and clearing data and factory reset again fixed the issue. Eclipse went smooth and is looking good! Just concerned on my battery life as I need a strong battery for work.
Yes u will have to clear data/cache from stock almost every time u sbf. I know I have.
i sbf back to 2.3.3 and reflashed the script and worked perfectly. thanks for all your help!
Hello all,
For the life of me, I cannot get Cyanogenmod 10 Alpha 3 to install on the Droid X2 that my friend gave me. I have been able to root it and CWM is installed (though only accessible via the System Recovery app and when plugged into the wall).
When I go to install from sdcard, I get the following:
-- Installing: SDCARD:cm-10-20130113-UNOFFICIAL-daytona.zip
Finding update package...
Opening updated package...
E:Can't open /sdcard/cm-10-20130113-UNOFFICIAL-daytona.zip
(bad)
Installation aborted.
I had wiped cache and factory reset before attempting. I've tried redownloading it. I've tried copying it to the "internal sdcard", which gives me a kernel error if i try to install from there.
Any ideas? I didn't have anywhere near this kind of trouble getting CM10 on my HTC Aria.
Thank you in advance.
Menu>system settings>about phone>system version, is what.? 1.3.380
Sent from my Clear using xda premium
sd_shadow said:
Menu>system settings>about phone>system version, is what.? 1.3.380
Sent from my Clear using xda premium
Click to expand...
Click to collapse
1.3.418.MB870.Verizon.en.US
Thanks Shadow.
OGhoul said:
Hello all,
For the life of me, I cannot get Cyanogenmod 10 Alpha 3 to install on the Droid X2 that my friend gave me. I have been able to root it and CWM is installed (though only accessible via the System Recovery app and when plugged into the wall).
When I go to install from sdcard, I get the following:
-- Installing: SDCARD:cm-10-20130113-UNOFFICIAL-daytona.zip
Finding update package...
Opening updated package...
E:Can't open /sdcard/cm-10-20130113-UNOFFICIAL-daytona.zip
(bad)
Installation aborted.
I had wiped cache and factory reset before attempting. I've tried redownloading it. I've tried copying it to the "internal sdcard", which gives me a kernel error if i try to install from there.
Any ideas? I didn't have anywhere near this kind of trouble getting CM10 on my HTC Aria.
Thank you in advance.
Click to expand...
Click to collapse
Lets put it the easy way, are you on android version 2.3.5 or 2.3.4. You need to be on 2.3.4 to install or it will abort like that. If your on 2.3.5 then sbf back to 2.3.4 and then install.
Sent from my MB870 using xda app-developers app
AKShotgun said:
Lets put it the easy way, are you on android version 2.3.5 or 2.3.4. You need to be on 2.3.4 to install or it will abort like that. If your on 2.3.5 then sbf back to 2.3.4 and then install.
Sent from my MB870 using xda app-developers app
Click to expand...
Click to collapse
I'm on 2.3.5; it came that way from my friend and when I bricked it last night, I sbf'd it back to 2.3.5 because I was unaware that you could roll back (my experience lies in iPhone jailbreaking, and we can't roll back 99% of the time).
So the course of action is to then:
1. SBF to 2.3.4 [REF] Roms, Root, SBF, RSD, Bootstrap, Mods
2. root via This root tool on the Unlockr? This was the root I've used thus far.
3. flash CWM: http://forum.xda-developers.com/showthread.php?t=1169677
4. Copy my rom zips to the SD card (do I need the WiFI patch? It's labeled MX2, I have a DX2)
5. Use the System Recovery app to get into CWM and flash my CM10, right?
yes those steps should be fine
don't use Wi-Fi fix
Sent from my XT862 using xda premium
sd_shadow said:
yes those steps should be fine
don't use Wi-Fi fix
Sent from my XT862 using xda premium
Click to expand...
Click to collapse
Awesome, thank you. I'll report back once I give it a shot. Hopefully this evening.
you may want to look at my list
sd_shadow's [Collection] of Links: For Droid X2 (MB870)
all-in-one ezSBF DX2 2.3.4 with zergrush root option
(does not need rsd lite, or moto drivers, has SBF and root options)
or How To Flash a SBF Using RSD Lite and video
---------- Post added at 08:57 AM ---------- Previous post was at 08:56 AM ----------
more [HOW-TO-VIDEOS] for Droid X2
Since I've already used RSD Lite to get the phone working again on (2.3.5), would there be any issue just to use RSD Lite again for 2.3.4?
The Linux boot USB drive sounds like a viable option though. Using that though, wouldn't I run option 1 then 2?
Thanks again Shadow.
If rsd lite has worked before, it should be fine
Sent from my Clear using xda premium
sd_shadow said:
If rsd lite has worked before, it should be fine
Sent from my Clear using xda premium
Click to expand...
Click to collapse
Spinning Stargate of CM10...
No annoying DROOOOOID sound and eyeball...
But it's been on the Cyanogenmod logo for a while now. Several minutes actually.
if it doesn't boot in 2-3 mins it's not likely going to.
sd_shadow said:
if it doesn't boot in 2-3 mins it's not likely going to.
Click to expand...
Click to collapse
Ok. I'm factory resetting and going to start over completely from scratch.
After installing CM10 and Gapps, should I wipe or reset anything before restarting?
use Gaaps 20121011
and may want to try flashing rerecovery zip, in bsr after flashing rom, link link my list under Droid X2
---------- Post added at 08:02 PM ---------- Previous post was at 08:00 PM ----------
rerecovery
sd_shadow said:
use Gaaps 20121011
and may want to try flashing rerecovery zip, in bsr after flashing rom, link link my list under Droid X2
---------- Post added at 08:02 PM ---------- Previous post was at 08:00 PM ----------
rerecovery
Click to expand...
Click to collapse
I got it going. After that last reinstall, I wiped everything and factory reset. After about 3 minutes it booted in.
Thanks for all the help!
Obviously I'm over my head, I'll tell you what I stupidly did. I have and razr xt910, I thought oh boy how bout upgrading my rom. I went to a few different rom and they all said i needed safetrap 3.75 and up, mine use to be 3.5 i think or something like that and i was just running a stock rom. When ever i would reboot safetrap would come up and tell me if i didnt do anything in 10 sec it would just boot normally. Well he is where i goofed because i wanted a new rom i uninstalled my old safetrap successfully and install the new one but for kitkat 4.4 but I'm sure i use to be 4.1. My phone no longer boots up the new safetrap boot up and say system will start in 10 sec but does not. PPPPPPlease pplse help I over my head and don't know what to do.
My phone no longer boots up the new safetrap boot up and say system will start in 10 sec but does not. PPPPPPlease pplse help I over my head and don't know what to do.
Click to expand...
Click to collapse
Power off, Hold volume buttons (or M key/droid 4), Power on, release buttons at
Boot Mode Selection Menu> Scroll down with volume down button, to BP Tools, Select with Volume UP button, should boot directly to SafeStrap (if it's still there).
Sent from my XT912 using Tapatalk
---------- Post added at 06:27 PM ---------- Previous post was at 06:22 PM ----------
ynotbu said:
Obviously I'm over my head, I'll tell you what I stupidly did. I have and razr xt910, I thought oh boy how bout upgrading my rom. I went to a few different rom and they all said i needed safetrap 3.75 and up,
Click to expand...
Click to collapse
you need safestrap 3.75 for CM12/lollipop/android 5.0 roms
mine use to be 3.5 i think or something like that and i was just running a stock rom. When ever i would reboot safetrap would come up and tell me if i didnt do anything in 10 sec it would just boot normally. Well he is where i goofed because i wanted a new rom i uninstalled my old safetrap successfully
Click to expand...
Click to collapse
you need to open old safestrap app and uninstall recovery, close app, then uninstall app
and install the new one but for kitkat 4.4 but I'm sure i use to be 4.1.
Click to expand...
Click to collapse
what was the exact name of the .apk?
sd_shadow said:
Power off, Hold volume buttons (or M key/droid 4), Power on, release buttons at
Boot Mode Selection Menu> Scroll down with volume down button, to BP Tools, Select with Volume UP button, should boot directly to SafeStrap (if it's still there).
Sent from my XT912 using Tapatalk
---------- Post added at 06:27 PM ---------- Previous post was at 06:22 PM ----------
you need safestrap 3.75 for CM12/lollipop/android 5.0 roms
you need to open old safestrap app and uninstall recovery, close app, then uninstall app
what was the exact name of the .apk?
Click to expand...
Click to collapse
Safestrap-I545-3.75-KitKat-A03.apk
ynotbu said:
Safestrap-I545-3.75-KitKat-A03.apk
Click to expand...
Click to collapse
@stargo has released a updated safestrap (v3.75 - Jan 2015)
Cm12 requires safestrap v3.75 (or newer)
Safestrap-XXXXX-v3.75.apk (31-Jan-2015 )
if you installed the debugged version likely do not need to upgrade, but if you have 3.74 or lower use Safestrap-XXXXXX-v3.75.apk (or newer)
follow the readme.txt instructions on the download site
Download the version for your device
Droid 4 = maserati, Droid Razr = spyder...
[Video] How to install Android 5.0.2 Lollipop on the Motorola Droid Bionic, Droid 4 and Droid Razr http://www.youtube.com/watch?v=2yMYUXV8FmI
Sent from my XT912 using Tapatalk
---------- Post added at 07:08 PM ---------- Previous post was at 07:05 PM ----------
use Safestrap-umts_spyder-v3.75.apk
---------- Post added at 07:12 PM ---------- Previous post was at 07:08 PM ----------
Safestrap-I545-3.75-KitKat-A03.apk is for the Samsung Galaxy S4
---------- Post added at 07:27 PM ---------- Previous post was at 07:12 PM ----------
I started the index, to avoid this kind of error
http://forum.xda-developers.com/showthread.php?t=3023837
[INDEX] Motorola Droid Razr Development (2015)
Sent from my XT912 using Tapatalk
So other than uninstalling the recovery through the old app, then deleting it then installing the newer 3.75 apk app, is there anything else someone should be mindful of?
I'm about to upgrade my safestrap from 3.73 to 3.75 myself on my XT912... Backing up everything while I read and reply...
Zymz said:
So other than uninstalling the recovery through the old app, then deleting it then installing the newer 3.75 apk app, is there anything else someone should be mindful of?
I'm about to upgrade my safestrap from 3.73 to 3.75 myself on my XT912... Backing up everything while I read and reply...
Click to expand...
Click to collapse
Download the correct version, make sure it is correct size, follow the readme.txt instructions.
Sent from my XT912 using Tapatalk
Success, it went smoothly, thank you.
I had just recovered from a RDS lite flash and installed ss 3.73 on android 4.0.4 and was booting fine. I used ss recovery to do a system+webtop+(one more) backup. After that I could no longer boot to stock ROM. I then wiped dalvik but that didn't help. Is there any other way then RDS lite to disable ss?
Sent from my HTC One using XDA Free mobile app
micnolmad said:
I had just recovered from a RDS lite flash and installed ss 3.73 on android 4.0.4 and was booting fine. I used as recovery to do a system+webtop+(one more) backup. After that I could no longer boot to stock ROM. I then wiped dalvik but that didn't help. Is there any other then RDS lite to disable ss?
Sent from my HTC One using XDA Free mobile app
Click to expand...
Click to collapse
No way to disable Safestrap and still boot stock, unless device is already in stock.
Suspect that if stock will not boot, it is no longer bootable, did you try restoring stock backup in safestrap?
That's what it's for.
or you could try my 6.16.207.XT908.LRA.en.US stock backup should work fine on the XT912, just doesn't have the Verizon bloatware
---------- Post added at 03:39 PM ---------- Previous post was at 03:37 PM ----------
Forgot that you wrote that it's on 4.0.4, my backup may not work.
sd_shadow said:
No way to disable Safestrap and still boot stock, unless device is already in stock.
Suspect that if stock will not boot, it is no longer bootable, did you try restoring stock backup in safestrap?
That's what it's for.
or you could try my 6.16.207.XT908.LRA.en.US stock backup should work fine on the XT912, just doesn't have the Verizon bloatware
---------- Post added at 03:39 PM ---------- Previous post was at 03:37 PM ----------
Forgot that you wrote that it's on 4.0.4, my backup may not work.
Click to expand...
Click to collapse
If you mean if I activated stock slot, then yes. I can't remember if I tried to restore my backup or not. I ended up just flashing with rds again. Of cause I had to do the setup all over again but it worked fine. I would just have hoped ss had a back-out option.
@sd_shadow, I rooted my droid razr T912 using the iRoot method. I have bootstrap 3.72 installed and I had made a back up of the image prior to installing CM 11. I'm running into errors installing anything on my razr now. I tried to go back to my old image copy but I erased system along with dalvic, data so now it won't boot up. I still have access to bootstrap, can you help me please? Do I need to restore the factory image or since I have bootstrap is there a way to get a new image on without the system files?
villian1998 said:
@sd_shadow, I rooted my droid razr T912 using the iRoot method. I have bootstrap 3.72 installed and I had made a back up of the image prior to installing CM 11. I'm running into errors installing anything on my razr now. I tried to go back to my old image copy but I erased system along with dalvic, data so now it won't boot up. I still have access to bootstrap, can you help me please? Do I need to restore the factory image or since I have bootstrap is there a way to get a new image on without the system files?
Click to expand...
Click to collapse
All Questions are to be posted to Q & A forum, I have requested that this thread be moved to Q&A.
---------- Post added at 12:23 PM ---------- Previous post was at 12:21 PM ----------
Which model number is on back cover of phone?
What are the full file names used? safestrap? rom? gapps?...
sd_shadow said:
All Questions are to be posted to Q & A forum, I have requested that this thread be moved to Q&A.
---------- Post added at 12:23 PM ---------- Previous post was at 12:21 PM ----------
Which model number is on back cover of phone? XT912
What are the full file names used? safestrap? rom? gapps?...
Click to expand...
Click to collapse
I used Rootmaster.apk to root the phone. I used stargo's 3.75 Safestrap 31-Jan-2015 for the recovery.
I used cm-12.1-20150519-NIGHTLY-spyder.zip and
gapps-lp-20150314.zip
but like I said these fail, which is fine but I can't get my old image back because it fails at the system install. I think it's because I initially wiped system?
In op you wrote that you used 3.72?
Sent from my XT907 using Tapatalk
Sorry
sd_shadow said:
In op you wrote that you used 3.72?
Sent from my XT907 using Tapatalk
Click to expand...
Click to collapse
I'm literally doing this while go in/out of meetings today. I think I need to re-root the phone again?
villian1998 said:
I'm literally doing this while go in/out of meetings today. I think I need to re-root the phone again?
Click to expand...
Click to collapse
If you can boot to twrp recovery, root doesn't matter
Sent from my XT907 using Tapatalk
---------- Post added at 02:09 PM ---------- Previous post was at 02:05 PM ----------
What files do you have on device now?
Sent from my XT907 using Tapatalk
sd_shadow said:
If you can boot to twrp recovery, root doesn't matter
Sent from my XT907 using Tapatalk
---------- Post added at 02:09 PM ---------- Previous post was at 02:05 PM ----------
What files do you have on device now?
Sent from my XT907 using Tapatalk
Click to expand...
Click to collapse
An update, I tried to re-install the old backup but without system, in which it didn't do anything but eventually came up to the bootstrap screen. It stated that I didn't have su and If I wanted to install the SU binaries. I clicked yes thinking that would get it to work and now I can't get the bootstrap screen, but I can only get to the bootloader now. It seems like I will need to revert back to the old firmware correct? In the AP Fastboot Flash Mode it says the device is locked btw.
villian1998 said:
An update, I tried to re-install the old backup but without system, in which it didn't do anything but eventually came up to the bootstrap screen. It stated that I didn't have su and If I wanted to install the SU binaries.
Click to expand...
Click to collapse
TWRP is used with many devices. With some devices twrp can be flashed before rooting, and then you can root with TWRP, the XT912 is not one of those devices.
When you get not rooted warning in twrp, that almost always means Rom is not bootable or completely missing.
Do not reboot if you get that warning.
It seems like I will need to revert back to the old firmware correct?
Click to expand...
Click to collapse
Yes now you need to flash stock firmware with RSD Lite.
Sent from my XT907 using Tapatalk
---------- Post added at 02:33 PM ---------- Previous post was at 02:29 PM ----------
villian1998 said:
In the AP Fastboot Flash Mode it says the device is locked btw.
Click to expand...
Click to collapse
the XT912 bootloader is not unlockable.
---------- Post added at 02:34 PM ---------- Previous post was at 02:33 PM ----------
villian1998 said:
An update, I tried to re-install the old backup but without system,
Click to expand...
Click to collapse
The twrp nandroid backup includes system and user partitions, if done correctly.
Ok, I'm in the process of using RSD lite
sd_shadow said:
TWRP is used with many devices. With some devices twrp can be flashed before rooting, and then you can root with TWRP, the XT912 is not one of those devices.
When you get not rooted warning in twrp, that almost always means Rom is not bootable or completely missing.
Do not reboot if you get that warning.
Yes now you need to flash stock firmware with RSD Lite.
Sent from my XT907 using Tapatalk
---------- Post added at 02:33 PM ---------- Previous post was at 02:29 PM ----------
the XT912 bootloader is not unlockable.
---------- Post added at 02:34 PM ---------- Previous post was at 02:33 PM ----------
The twrp nandroid backup includes system and user partitions, if done correctly.
Click to expand...
Click to collapse
But the link to get to the recovery firmware for the Razr xt912 doesn't work, do you have another mirror?
villian1998 said:
But the link to get to the recovery firmware for the Razr xt912 doesn't work, do you have another mirror?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=58684545&postcount=2
You sir are a life saver!!
sd_shadow said:
http://forum.xda-developers.com/showpost.php?p=58684545&postcount=2
Click to expand...
Click to collapse
I'm sure I can get it back to normal now.
Thank you so very much
Alright, I'm back again. But this an interesting development. Let me describe the whole process.
I originally rooted using the Saferoot - [Video]Safe Root for Jelly Bean Android Devices like the Droid Bionic 4.1.2 & More @Tomsgt to root again. It worked like a charm. I updated the SU binaries from the updated SU app and placed SU in my system. My next step was to install safestrap 3.75 which I had the apk still on my internal memory and was able to install it successfully. I booted to the recovery and made a back up(which I'm curious to know if it actually worked this time, but I haven't flashed back to yet) which worked flawlessly. Now this time I wiped with just doing a simple dalvik cache wipe and installed CM12 per the directions and Gapps in this thread Official CM12 thread - Official Downloads (XT912). Everything appears to be fine but I noticed that I didn't have SU, I checked to see if the phone was rooted, which the jRummy root checker says no root. I've tried flashing a SU zip from this post Quote:
Originally Posted by andreimoto
i found my razr in cm12 not root...
maybe this is silly question.... then how to make it root?
thanks dude...
https://download.chainfire.eu/396/Su...etrieve_file=1 just flash superSU in ss recovery to gain root access.
So I can't seem to get root access which is bothering me, but not a deal breaker. I've also noticed that when I try to connect to the computer, my computer can't connect to the phone for some reason. So I'm curious to know how I can get root access again? Should I try saferoot again? I hope this is makes sense.....
villian1998 said:
Alright, I'm back again. But this an interesting development. Let me describe the whole process.
I originally rooted using the Saferoot - [Video]Safe Root for Jelly Bean Android Devices like the Droid Bionic 4.1.2 & More @Tomsgt to root again. It worked like a charm. I updated the SU binaries from the updated SU app and placed SU in my system. My next step was to install safestrap 3.75 which I had the apk still on my internal memory and was able to install it successfully. I booted to the recovery and made a back up(which I'm curious to know if it actually worked this time, but I haven't flashed back to yet) which worked flawlessly. Now this time I wiped with just doing a simple dalvik cache wipe and installed CM12 per the directions and Gapps in this thread Official CM12 thread - Official Downloads (XT912). Everything appears to be fine but I noticed that I didn't have SU, I checked to see if the phone was rooted, which the jRummy root checker says no root. I've tried flashing a SU zip from this post Quote:
Originally Posted by andreimoto
i found my razr in cm12 not root...
maybe this is silly question.... then how to make it root?
thanks dude...
https://download.chainfire.eu/396/Su...etrieve_file=1 just flash superSU in ss recovery to gain root access.
So I can't seem to get root access which is bothering me, but not a deal breaker. I've also noticed that when I try to connect to the computer, my computer can't connect to the phone for some reason. So I'm curious to know how I can get root access again? Should I try saferoot again? I hope this is makes sense.....
Click to expand...
Click to collapse
every rom has a separate superuser/binary, root access for stock has nothing to do with a custom rom.
if you can boot to twrp recovery, stock slot should be rooted.
rom slot you are installing cm12 in?
full file names?
verified md5s?
---------- Post added at 04:51 PM ---------- Previous post was at 04:50 PM ----------
How did you move SuperSu to system?
sd_shadow said:
every rom has a separate superuser/binary, root access for stock has nothing to do with a custom rom.
if you can boot to twrp recovery, stock slot should be rooted.
rom slot you are installing cm12 in?
full file names?
verified md5s?
Yes I can boot to twrp recovery.
I installed to internal slot
cm-12.1-20150528-NIGHTLY-spyder.zip
md5sum: e230e1b71b7158c6d89a961e9c6c6087
For GApps, I used these: https://s.basketbuild.com/gapps
Tried this zip for SU https://download.chainfire.eu/396/Su...etrieve_file=1 just flash superSU in ss recovery to gain root access.
Yes verified all MD5s.
Click to expand...
Click to collapse
villian1998 said:
I installed to internal slot
.
Click to expand...
Click to collapse
? slot options are 1 , 2, 3, 4 and stock.
If you installed Mentor.37's you also have a safe slot
Sorry, I'm new to the razr
sd_shadow said:
? slot options are 1 , 2, 3, 4 and stock.
If you installed Mentor.37's you also have a safe slot
Click to expand...
Click to collapse
I've googled and searched on xda about slots for the xt912, but I'm merely confused. So to answer your question I don't really know, but I'll keep searching....
villian1998 said:
I've googled and searched on xda about slots for the xt912, but I'm merely confused. So to answer your question I don't really know, but I'll keep searching....
Click to expand...
Click to collapse
You don't need to search, it says in twrp which slot is selected.
see my [Video] Installing/Upgrading Safestrap 3.75 and Installing a Lollypop Rom
or Tomsgt's [Video]How to install Safestrap 3.75 and Android 5.0.2 Lollipop on the Motorola Droid Bionic, Droid 4 and Droid Razr
Ah, thanks for the clarification
sd_shadow said:
You don't need to search, it says in twrp which slot is selected.
see my [Video] Installing/Upgrading Safestrap 3.75 and Installing a Lollypop Rom
or Tomsgt's [Video]How to install Safestrap 3.75 and Android 5.0.2 Lollipop on the Motorola Droid Bionic, Droid 4 and Droid Razr
Click to expand...
Click to collapse
It's intalled on the stock slot
villian1998 said:
It's intalled on the stock slot
Click to expand...
Click to collapse
try installing on a rom slot