Hello all,
I have a galaxy tab 10.1 GT-P7500 with 3G & WIFI.
I recently flashed a wifi only ROM unknowingly and lost the 3G capability.
I want that though !! Please let me know if I flash Broodcomb, will I regain 3G ability ? Or else should I switch back to stock and wait for someone to release a new working 3G + WIFI rom.
Help appreciated !!
i think right now broodcomb is the only custom rom with 3g, i'm waiting for more choice before flashing it...
Didn't you do a nandroid before flashing a new firmware??
Sent from my GT-P7500 using XDA App
Well I know I should have made a nandroid backup but did not :!
Now can't even revert back .. is there anywhere that I can get a flashable stock firmware for the P7500 for WIFI+3G ?
---------- Post added at 10:36 AM ---------- Previous post was at 10:31 AM ----------
Also is broodcomb an only 3G firmware - or does it have wifi support as well ? Coz I need both otherwise no point in flashing... the broodcomb post is not clear enough !!
Broodcomb supports booth 3g and wifi. There is no rom with only 3g that i know about.
You will get your 3g back if you flash a rom that supports it.
Stock firmwares you can find at samfirmware.com or at sampro.pl or in the development section.
/qsec
Sent from my GT-P7500 using Tapatalk
Related
Hello,
I have tablet 10.1 3g, I have 3.2 Stock rom, and pershoot kernel. I want to go back to stock everything.
I want it to be like taking it out of the box. 3.1 is ok, just want to be able to do it.
can anyone help me out on this?
I really want to be able to update through kies or OTA with samsung itself, I know its kinda nooby to do this.
I have my reasons please help me out.
Thanks a lot.
jsikaffy said:
Hello,
I have tablet 10.1 3g, I have 3.2 Stock rom, and pershoot kernel. I want to go back to stock everything.
I want it to be like taking it out of the box. 3.1 is ok, just want to be able to do it.
can anyone help me out on this?
I really want to be able to update through kies or OTA with samsung itself, I know its kinda nooby to do this.
I have my reasons please help me out.
Thanks a lot.
Click to expand...
Click to collapse
If you know how to flash a kernal, then just do it again with stock kernal. Or do a full wipe and factory reset in cwm or factory reset in settings/privacy that way it will be as out of the box and you will still have Pershoot's kernal.
Or
Forget all that and flash a custom rom like Task's, then you get the update, kernal, root and everything else improved and still get the out of the box experience with a whole new rom
---------- Post added at 02:08 PM ---------- Previous post was at 02:06 PM ----------
Just noticed you said 3g . All I said is still right except Task's rom is for wifi only.
Follow the instructions in "Re-“Stocking” Yer System…" section of http://p7510.teamovercome.net/?page_id=18 to get stock ROM.
After this flash the stock recovery using ODIN.
Then factory reset in stock recovery.(note: this will erase your SD card data too)
I followed a guide recently, but it took me to honeycomb.... Like the google io devices. Pissed me off.
Task.. just makes for WIFI... and overcome tab gave tooooo many FC when I flashed it. Did not enjoy it at all.
Im currently running stock 3.2 and pershoot kernel at 1.4ghz.
Screen rotation is extremly laggy... and many other things are laggy also.
hey guys,
i found a lot of theats for this topic, but no one can help me.
wi-fi will work and i find all wireless networks in my neighborhood, but if i connect, the signal strength decrease to 1 - 5%.
then android reconnect.
the signal strengh will great until i try to connect.
one solution i found descriped to install the stock rom and then update to cm. but if i try this i get the bootlook. i must factory reset the device. then all data will lost. and i get the same problem.
does anyone know what happens?
i tried 3 AOSP roms, cm9, cm10 and AOKP rom.
all 3 with android ui has the same problem. only the stock and samsung based roms works.
at the moment i use Android Revolution HD .
but i don´t like the samsung ui
greetz ravn
Hi, Just follow the instruction in op and you wont have a problem. Not to lose anything just backup them! Simple!
Sent from my GT-I9300 using xda app-developers app
You have to ODIN flash 4.0.4 stock rom before flashing CM10 to get rid of wi-fi issues. Thats all I know about that.
Did you lose your way to the cm10 discussion thread?
Sent from my GT-I9300 using Tapatalk 2
Hi every body,
I have been searching about 2 weeks in these threads but i couldn't find my answers.
I have a T-mobile samsung vibrant phone and I am slightly amateur about changing my ROM.
1- Is there any differences between T-Mobile and Samsung vibrant except sim-Lock? Can I use the ROM which mentioned in sasung vibrant thread?
2- I have 2.1 stock- rooted without CWM recovery yet, can I flash 2.2 ? if yes how(I don't have high speed internet connection so I prefer to flash it on my phone)?
3- How can I use CM ROM? Is it required to have special bootloader or something els? what are the bugs of CM Roms?
4- Please help me,
Thank you thank you thank you
molimo said:
Hi every body,
I have been searching about 2 weeks in these threads but i couldn't find my answers.
I have a T-mobile samsung vibrant phone and I am slightly amateur about changing my ROM.
1- Is there any differences between T-Mobile and Samsung vibrant except sim-Lock? Can I use the ROM which mentioned in sasung vibrant thread?
2- I have 2.1 stock- rooted without CWM recovery yet, can I flash 2.2 ? if yes how(I don't have high speed internet connection so I prefer to flash it on my phone)?
3- How can I use CM ROM? Is it required to have special bootloader or something els? what are the bugs of CM Roms?
4- Please help me,
Thank you thank you thank you
Click to expand...
Click to collapse
Ok
1. The phone IS the Samsung Galaxy S
T-mobile Vibrant SGH-T959. It comes sim locked fro tmo but it can very easily be unlocked by an app from playstore, if youd like but isnt required to flash custom roms. So yes Samsung vibrant=T-mobile vibrant.
2. The official 2.2 from Samsung is installed through kies mini but dont do it! There probably is an official odin image floating around as well but again dont worry about that. You are at the best place to begin using custom roms. All you need is to flash cwm recovery and its go time. I will link some threads for you. **You may run into some issue not having HS internet connection as there are a lot of files that need downloaded.**
3.In order to use a CM rom, you must have a custom (CWM) recovery. As far as boots, there are froyo bootloaders and gingerbread bootloaders. Most roms are fine with froyo boots, some recommend GB boots, some require GB boots and all will work with GB boots so its best to install GB boots. Any known bugs on a custom rom are usually posted in op. Some bugs in alpha and beta builds might not have been reported yet. Thus far, cm7 7.1-2=stable, cm9=stable, cm10=stable, cm10.1=beta. I havent used it myself but check the thread for bugs.
Read this thread first! It is the vibrant bible from N00B, a must read.
http://forum.xda-developers.com/showthread.php?p=33906780
What you don't know could fill a book.
---------- Post added at 12:14 PM ---------- Previous post was at 12:04 PM ----------
Here is a guide that has directions to get cwm recovery. Use option b.
http://forum.xda-developers.com/showthread.php?p=9375927
What you don't know could fill a book.
---------- Post added at 12:17 PM ---------- Previous post was at 12:14 PM ----------
Here is the thread for GB boots. http://forum.xda-developers.com/showthread.php?p=14588896 You will need odin on your pc to do this.
Hopefully I have helped, if so hit that button.....thanks.
What you don't know could fill a book.
Hey guys I don't know if anyone can help me but here's the situation.
I recently unrooted and flashed stock on my GS3. After the procedure was done I noticed I was getting no signal and couldn't send texts nor use mobile data. I researched and read about flashing the XXEMG4 modem to get my network working again. I did so and it's all working fine on the stock rom currently. However I prefer Cyanogenmod to Touchwiz and was wondering if I flash cyanogenmod will it install a custom modem again and stop my network from working? If so can I just flash the XXEMG4 to make it work with cyanogenmod?
I'm using an i9300 with stock (4.1.2)
Aosp roms dont come with a modem
Sent from my GT-I9300 using Tapatalk 4
you will still have your old modem.
---------- Post added at 01:24 PM ---------- Previous post was at 01:23 PM ----------
that is the modem from the stock you flashed lately
Stock and lagging as heck. I have always rooted and am almost done with rooting the TMO S5. I am looking for a rom that is complete and does not lag. I have always used the Stock roms on my other samsung verizon phones and felt the most comfortable with them.
Which is the Fastest lag free rom for the TMO s5 and closest to stock minus bloatware etc.
Thanks in advance.
Do you need wifi calling if not then
Use my maverick rom v4 on international thread it had s6 features because it is a port
If you need WiFi calling use my area 51 rom I update fast
Sent from my SM-G903F using Tapatalk
---------- Post added at 04:07 PM ---------- Previous post was at 04:05 PM ----------
However their is a rom by raname that is debloated on tmobile android development and is pretty fast but I haven't seen him in a while
They are plenty roms on international just find one you feel that suits you
My answer will always be bias
Sent from my SM-G903F using Tapatalk
malbert16442 said:
Do you need wifi calling if not then
Use my maverick rom v4 on international thread it had s6 features because it is a port
If you need WiFi calling use my area 51 rom I update fast
Sent from my SM-G903F using Tapatalk
---------- Post added at 04:07 PM ---------- Previous post was at 04:05 PM ----------
However their is a rom by raname that is debloated on tmobile android development and is pretty fast but I haven't seen him in a while
They are plenty roms on international just find one you feel that suits you
My answer will always be bias
Sent from my SM-G903F using Tapatalk
Click to expand...
Click to collapse
I travel a lot internationally for work. so wifi calling is important to me. I will try the area 51.
Thanks, I want to support the guy that made the hispasian kernel how do i do that.?
i am on f0j4 to use your area51 rom do i need to be on og6? is flashing back as simple as using the bootloader and stock modem tar's in odin and flash back? Then can I flash the v9.6 of your rom onto my phone through odin as well using the pds button? or do i need to find a 0g6 version of the rom and flash that first?
ccommcomm said:
i am on f0j4 to use your area51 rom do i need to be on og6? is flashing back as simple as using the bootloader and stock modem tar's in odin and flash back? Then can I flash the v9.6 of your rom onto my phone through odin as well using the pds button? or do i need to find a 0g6 version of the rom and flash that first?
Click to expand...
Click to collapse
area51 is oj4. if you want to support hispasian kernel you can flash it over the kernel used in 51. You might need to install the correct supersu but i would think it would work fine.
---------- Post added at 06:37 PM ---------- Previous post was at 06:36 PM ----------
hispasian kernel v8 i believe
destructionj said:
area51 is oj4. if you want to support hispasian kernel you can flash it over the kernel used in 51. You might need to install the correct supersu but i would think it would work fine.
---------- Post added at 06:37 PM ---------- Previous post was at 06:36 PM ----------
hispasian kernel v8 i believe
Click to expand...
Click to collapse
I got rooted I am just getting ready to flash the new rom. I used the hispasian kernel and sent him some love.
I don't need to stay with it if there is something better to run with the area 51 rom.
My question now is as follows? I already am running f0j4 do i need to flash the stock modem and bootloader? Can I just skip those steps and go straight to the odin and flash the rom?
ccommcomm said:
I got rooted I am just getting ready to flash the new rom. I used the hispasian kernel and sent him some love.
I don't need to stay with it if there is something better to run with the area 51 rom.
My question now is as follows? I already am running f0j4 do i need to flash the stock modem and bootloader? Can I just skip those steps and go straight to the odin and flash the rom?
Click to expand...
Click to collapse
I guess it would depend on the method that was used for getting the phone to OJ4.
If it was a full install then your bootloader is OJ4 which the area51 is based off of.
My modem and bootloader is OJ4 however others have said OG6 works as well too.
If your OG6 or OJ4 then you dont need to flash a modem or bootloader.
Also Area51 and 9.6 are flashed in custom recovery not odin.
destructionj said:
I guess it would depend on the method that was used for getting the phone to OJ4.
If it was a full install then your bootloader is OJ4 which the area51 is based off of.
My modem and bootloader is OJ4 however others have said OG6 works as well too.
If your OG6 or OJ4 then you dont need to flash a modem or bootloader.
Also Area51 and 9.6 are flashed in custom recovery not odin.
Click to expand...
Click to collapse
I got to Oj4 by OTA I assume. When I bought the phone off of Craigslist it came this way.
I maybe confused in regards to V9.6 and Area 51. I though that Area 51 was the rom and it was currently in Version 9.6.
I have downloaded it from the download tab on this forum link. http://forum.xda-developers.com/tmo...t/maverick-5-1-1-improved-edition-v2-t3159387
It says it is version 1 when I download it. Area 51 v1.zip to be precise.
I was also planning on following the instructions on this page #3 forum post to flash the rom. Is this wrong? Am I going in the wrong direction?
ccommcomm said:
I got to Oj4 by OTA I assume. When I bought the phone off of Craigslist it came this way.
I maybe confused in regards to V9.6 and Area 51. I though that Area 51 was the rom and it was currently in Version 9.6.
I have downloaded it from the download tab on this forum link. http://forum.xda-developers.com/tmo...t/maverick-5-1-1-improved-edition-v2-t3159387
It says it is version 1 when I download it. Area 51 v1.zip to be precise.
I was also planning on following the instructions on this page #3 forum post to flash the rom. Is this wrong? Am I going in the wrong direction?
Click to expand...
Click to collapse
Post 3 is not needed if you are on OJ4 already. Area51 and 9.6 are different roms. you do need to flash in twrp and install the rom from within twrp.
so step 4 and 5.
malbert16442 said:
Step 4
Close and then reopen Odin, pull the battery for 30 seconds, pop back in and boot into download mode all with your phone disconnected from your computer. Now grab the TWRP recovery image from here https://dl.twrp.me/klte/ (I use 2.8.7.0) and place into the PDA button inside odin, uncheck F Reset Time and Repartition then flash or click start.
Step 5
When step 4 completes, now you can do the 3 finger boot into TWRP recovery to flash V9.4 of this ROM.
Click to expand...
Click to collapse
However post 3 is old you would flash area51
Just for future reference. This section is only for developing. There is a Q&A section where you can post for questions like this. No offense but people always go crazy when others post in the wrong section.