i tried to upgrade my rom from wm6 pro to wm 6.5 pro
followed all the procedure step by step as given on this site. was successfull in 1st attempt. i could boot to wm6.5
then wanted to change the rom build. so downloaded new rom available. and followed the entire procedure again step by step. now i am not able to boot. my p3400i gets stuck at the startup screen with HTC logo. and it displays
ONBL 1.17.0000
SPL 1.07.Oref
GSM 02.79.90
OS 1.17.0.0
It does not boot further.
please help me urgently.
---------- Post added at 03:37 PM ---------- Previous post was at 02:39 PM ----------
I have also tried hard resetting. but didnt work. i tried flashing with another rom. while upgrading it with ROMUpdateutility it says that updation will take around 10 mins but with me the updation progress bar completes 100% in less than 5 secs. and then when the phone reboots it again gets stuck at the startup screen with HTC logo.
i am using HTC p3400i gene100 s/n HT8xxxxxxx
on boot up it shows HTC startup screen with HTC logo and
ONBL 1.17.0000
SPL 1.07.Oref
GSM 02.79.90
OS 1.17.0.0
it gets stuck here. doesnt boot further.
please some one help me urgently.
shail874u said:
i tried to upgrade my rom from wm6 pro to wm 6.5 pro
followed all the procedure step by step as given on this site. was successfull in 1st attempt. i could boot to wm6.5
then wanted to change the rom build. so downloaded new rom available. and followed the entire procedure again step by step. now i am not able to boot. my p3400i gets stuck at the startup screen with HTC logo. and it displays
ONBL 1.17.0000
SPL 1.07.Oref
GSM 02.79.90
OS 1.17.0.0
It does not boot further.
please help me urgently.
---------- Post added at 03:37 PM ---------- Previous post was at 02:39 PM ----------
I have also tried hard resetting. but didnt work. i tried flashing with another rom. while upgrading it with ROMUpdateutility it says that updation will take around 10 mins but with me the updation progress bar completes 100% in less than 5 secs. and then when the phone reboots it again gets stuck at the startup screen with HTC logo.
i am using HTC p3400i gene100 s/n HT8xxxxxxx
on boot up it shows HTC startup screen with HTC logo and
ONBL 1.17.0000
SPL 1.07.Oref
GSM 02.79.90
OS 1.17.0.0
it gets stuck here. doesnt boot further.
please some one help me urgently.
Click to expand...
Click to collapse
Are you sure that Olipro method was not suitable for your device?
If so then you are right.Make sure that you have downloaded ROM for New GENE not for Old GENE and flash it again.
Hope this will help you.
Sorry for Bad english.
problem solved..
Thankyou Mr. Harsh for that kind reply.
i tried the entire procedure again and again with the same rom. i did it with different things told in different threads here like flashing with SD card.. Hard reseting.. soft reseting.. stopping active sync services..etc etc. but was unable to restore my device.
then before trying it for the last time the thing that i remember i did was stopping the service wcescomm in the windows task manager on my pc. after stopping the service i followed the entire and same procedure again with the same rom and i was able to restore my handset to wm6.5
i dont know what all was going wrong. i also dont know what went right.. but fortunately after working on it for the full day by trying all sorts of things i was able to restore my device finally. Thanks to god.
Please can any one/expert here tell me what was going wrong and what went right so that other people facing the same problem can benefit??
Thanks in advance
Killing of wcecomm.exe didn't have solved your problem.There will be other reason.Because when you runs ROMupdateutility.exe,It automatically kills wcecomm.exe.
But as you are telling pehaps your Rom utlity was not killing wcecomm.exe.
so, is it working now???
viks120 said:
so, is it working now???
Click to expand...
Click to collapse
If your GENE is working then it is working
Related
First im sorry if this has been asked before
but i already search and tried the solution and still unresolved
i have dopod 818pro that stuck and 2nd Splash Screen
G4 with ipl 2.15.0001 and spl 2.20.0001
Now i already tried to upgrade using original rom dopod 818pro (RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_Ship.exe)
in the bootloader and its succesfull update but after hard reset
it still stuck at the splash screen
already tried a couple times on a different computer also and its still the same result
after i that i take nerve to upgrade using qtek (RUU_Prophet_220734_2207114_024721_NVID_2.exe)
the update was successfull and the 2nd splash was changed from dopod to qtek
but its still stuck at the 2nd Splash Screen
At different thread a guy suggest to update using PVTemp rom (ROMUpdateUtility_NV_G4.exe) and hard reset.
i download it and try it and its still stuck at the 2nd splash screen.
So please help me guys by giving a solution or
tell me how to get back the 2nd splash screen to dopod
cos maybe i tried to sent it back to original service center.
cos now everytime i update using the original dopod rom it always say "Please use newer nbf" this was after i update using the qtek rom..
Thx guys
I have HT7 Phone it bricks during upgrading the SPL because it had WM5 and I went to install WM6
I can boot the Phone in Recovery Mode ( Holding the Camera Button and Boot ). Three Color Screen and I can communicate with the phone through the MTTY but during installing the Update it says ERROR 300
is there anyway to get the phone alive again ?
Thanks for your Help
** I have Kaiser and it's not mine , it was belong to my friend and I damaged his phone
PS : Phone is out of warranty and there is no service center here , also I can't use the JTAG Method
jafer mainly error 300 comes in when you are using wrong rom update utility... atleast in my case...after running spl pgm from phone and mtty program make sure you run the rom update utility inside the spl folder before running the rom update utility inside the rom folder... hope this helps.. and make sure that the rom is for old gene...
which spl its nowing at the tricolor screen now... oref or olipro?
which spl its showing at the tricolor screen now... oref or olipro?
ONBL 1.10.0000
SPL 1.07.oref
Thank you
Could you please explain more , where to get those files
I got Unbricker from here
http://forum.xda-developers.com/showpost.php?p=2784291&postcount=66
Thank you again
Question : when TriColor Launched can I re-flash the original firmware ? i don't know what to do now
Please look at the stickey, krazy has made quite a good tutorial about flashing etc and has all the tools hyperlinked. LoL
Hi Thanks but please don't refer me to reads topics , because i've already read all of them
The Phone is HT7 , during the upgrade it bricks , I used the " Orefkov " but it seems it only works for new Phones
Anyway by no I can Boot the Phone in Tri Color Mode but when i try to upgrade a rom it says ERORR 300
is there any way to BOOT the Phone through the SD Card ? I already had the same issue with another phone , I boot the phone with SDCard and it became alive again !!
But I don't know the Instructions for this GENO Crappy Phone
try removing the SD card and update the ROM. BTW as far as i know oref Is for new Gene. post a query on the right thread and ankit or krazy or any proficient member will definitely help you out. or you may pm basha for help.
I ran hspl.exe. It's didn't restart but went off. I press soft reset now only bootloader is showing with ONBL 1.10.0000 and SPL 1.10.Olip. there is also RUU at the top right corner. What can I do now to flash another rom or get back my gene?
your_suraj said:
I ran hspl.exe. It's didn't restart but went off. I press soft reset now only bootloader is showing with ONBL 1.10.0000 and SPL 1.10.Olip. there is also RUU at the top right corner. What can I do now to flash another rom or get back my gene?
Click to expand...
Click to collapse
First try to remove the battery and then put it back in and try to switch it on see if it boots into the windows...if not then follow the step given below...
Download any custom rom for OLD gene and run the rom update utility (RUU) it will be back to normal...
Note : Most importantly don't panic ...even if the phone is taking its usual time to boot up it may seem longer cos we are worried....have patience...
hay man
tell us the serial number of your device to tell you exactly what to do
is it (ht8xxx) or (ht7xxx) ?
it is very important
and for god's sake guys read the sticky threads first.
do not do anything before getting answers from other members.
Thanks guys, but I solve it already but I am not able to download any rom for my gene.
Can somebody give me another mirror apart from rapidshare and megaupload............. and which ROM is good, like with cube for my gene HTC 3400?
your_suraj said:
I ran hspl.exe. It's didn't restart but went off. I press soft reset now only bootloader is showing with ONBL 1.10.0000 and SPL 1.10.Olip. there is also RUU at the top right corner. What can I do now to flash another rom or get back my gene?
Click to expand...
Click to collapse
Its normal thing that ur device got off after hspl.exe
it seems like u hv new gene....so now u should use Oref unbricker...
u just followed step 1....
so u should move on to step 2
which is unbricking gene by oref method
http://forum.xda-developers.com/showthread.php?t=472169
read this bro n follow instructions...
Thank you once again but I have solved my problem already. Now all I need is a new rom for my old gene.
Could anyone give me alternative mirror for any rom? Rapidshare and megaupload is not working for me.
Help - Gene stuck at boot loader after upgrading ROM 6.5
ONBL 1.07.0000
SPL 1.07.olip
GSM 02.79.90
OS 1.7.0.0
This happened when i upgraded the ROM from WM 6.1 to 6.5
Kindly help me how to restore my phone
same here
same happened to my Gene. I tried upgrading ROM to 6.5. after restart, it get struck on bootloader screen. it is not even detected by activsync
i have a Old gene on which i had upgraded the rom to windows 6.5 using Olipro.
Now i had given the phone to my brother he again tried to upgrade! But the phone is stuck at the tricolour screen showing;-
ONBL (blank)
SPL 1.28.0000
Dont Power off!
pls update new image Now!
Re-formatting OK!
PLease help me....my phone is stuck
http://forum.xda-developers.com/showpost.php?p=4894163&postcount=388
it may help u as its an official ROM which contains IPL, SPL, RADIO, EXT & ROM
Same problem
Please help exact same problem ...prob cid locked and no bootloader...
Hey Guys I have a HTC Gene p3400i previously i spoke to guys like sumit and Krazy also, first i had a motherboard series of HT8X, i somehow unlocked the CID using Orefkov method, but everything was fine oneday i flashed it with a Wrong Stock ROM and thats where the problm started, it got bricked i took it to service center the technicians were very helpful they changed the motherboard to a new one of HT8X series, i tried to unlock the CID/Change the SPL to either Olipro or Orefkov both didnt work when i tried with Olipro jumpspl method it says the Update Utility is invalid, when i tried with Orefkov mtty it says cant unlock the CID or basicaly it says cant place the SPL and finally i tried the Olipro HSPL method it goes to boot loader shows Olipro 1.10 in SPL but when i flash a Old gene ROM the RUU utility says or wants a new RUU i tried it around 5 times continously starting from monday to Friday and totally it got bricked for 5 times also, i took it again and again to service center the guys didnt hesitate they were really helpfull they unbricked it, i even asked would i get my previous motherboard they said its already been sent to HTC for Fault Repair.
Now the methods which i can't use:
1) Olipro HSPL (which again bricks)
2) the Orefkov mtty (which says cant place the spl)
3) the Olipro Jumpspl method which shows a Blank white screen but when try to update using RUU says requires new RUU
PLEASE HELP.....!! THIS HAS BECOME A CHALLENGE FOR ME>>>>>>>> I READ ABOUT THE SAME PROBLM IN THE FORUM BY NEW BEES ALSO PLZ HELP......!!
Now i m using the stock rom which came with gene,i added a lot applications i somehow managed to get touch control for scrolling and all everything ok.....but i miss the WM 6.5 style MENU, TASKBAR, FREE RAM and most of all the TITANIUM it was my favourite i was using Duron's WM 6.5 for new gene it was very cool...
Now i feel like crying i am addicted to WM 6.5 PLZ HELP...