Hi,
I am Bell Atrix User.
i want to know which radio should i flash.
Radio Images
(AT&T .91)
(Bell)
or i dont have to flash any just user the radio which come pre loaded with CM7.
P.S: i dont use 3g or HSPA+ or Edge, i just want gr8 battery life, quick wifi connection and low phone heat-up
Bell Atrix ? Bell radio ....
See this: https://code.google.com/p/atrix-dev-team/wiki/FAQ
ofek said:
Bell Atrix ? Bell radio ....
See this: https://code.google.com/p/atrix-dev-team/wiki/FAQ
Click to expand...
Click to collapse
I just flashed CM7 Beta and i checked my baseband and its N_01.77.15P (which i am assuming is of Bell Froyo, and i was very much happy with it on froyo)
so should i continue with it (GPS seams to be working fine) or should i flash N_01.77.33P (like i said i dont use data connection at all.
CM7 is based on Gingerbread, and the Bell radio that CM crew recommend is the Gingerbread radio for Bell Atrix.
So you should install this radio
It will give you better performance since you now using Froyo radio with Gingerbread system.
Related
Hey Guys,
After seeing what is going on with the GB radio/BAMF bricking situation, I just had a quick question about the radio I am using.
I am running CM7 (the newest based on 2.3.4), but not with the stock radio. I flashed the first one from the Obligatory Radio Thread (1.13.605.7 CDMA/LTE radio combo.
CDMA Radio version: 1.16.00.0402w_1
LTE radio version that came with 1.13.605.7)
Is this ok to be using? If not, is there a better one I could be/should be using?
On a side note, how can I get back to the stock radio that comes with cm7
nthnkrk said:
Hey Guys,
After seeing what is going on with the GB radio/BAMF bricking situation, I just had a quick question about the radio I am using.
I am running CM7 (the newest based on 2.3.4), but not with the stock radio. I flashed the first one from the Obligatory Radio Thread (1.13.605.7 CDMA/LTE radio combo.
CDMA Radio version: 1.16.00.0402w_1
LTE radio version that came with 1.13.605.7)
Is this ok to be using? If not, is there a better one I could be/should be using?
On a side note, how can I get back to the stock radio that comes with cm7
Click to expand...
Click to collapse
The radio you have is fine, there is nothing to worry about.
No radio comes "stock" with CM7.
thanks dude
Hi,
I have a french orange branded Atrix running under ORFR 2.3.4 and will most likely flash RedPill as soon as it gets in V4. I haven't changed the Radio yet, so I'd like to know
1) what radio would fit the best ?
2) is it safe to flash it ?
3) Can Intl and ATT users flash the same radios ?
We're having more and more ROMs but there's not much information about the radios, and I have to say that I'm starting to get lost with all those hardbrick problems...
Thanks for your help
Envoyé de mon Motorola Atrix
First off I'd recommend alien or picrust
But really, I would suggest trying the bell radio here first, then the ATT radio if that does not work.
It is safe to flash the radios found here.
http://forum.xda-developers.com/showthread.php?t=1163009
1) Try bell, then ATT (and speedtest). If that fails, use the telestra radio
2) Yes (if it is extracted from an update ie. only 10-30mb in size)
3) Yes
Cheers
Ok I'll try the Bell when I'll flash a new rom. Thanks for the information !
Just want to know...
After you updated your device to OTA 4.5.91 (2.3.4) AT&T , is your radio updated too ?
Thanks.
UP ..........
radio
You get the .91 radio also. So yes, new radio. (even if nothing changes, I heard they give it a new number.)
I am running unlocked 4.5.91, flashed via the SBF, and my Baseband version is N_01.77.30P.
Does that sound right, or do I need to flash something newer (for kernel support, etc; my phone is functioning fine with good cell speeds (5.4mbps down, 1mbps up) and gps lock, and although wifi is slow to start it works)?
Thanks!
Yeah, thats the radio you need to be on, its the at&t GingerBread radio.
OP, you can get just the radio .img here if you want to flash it before doing the OTA udpate (assuming you haven't already done this):
http://forum.xda-developers.com/showthread.php?t=1159505
"Very positive comments about this radio from everyone who's flashed. Looks like this is the best yet."
- Ken Pennington
Thanks but already update with Fruit Cakes
http://forum.xda-developers.com/showthread.php?t=1163009
How do i know what radio do I have? I flashed to oficial Gingerbread from ATT afterwards I rooted and unlocked my device and now I am at Alien #4 with stock kernel.
Any hint? I wanna flash this kernel and it says i need 1.97 radio so I'm not sure.
Kenchinito said:
How do i know what radio do I have? I flashed to oficial Gingerbread from ATT afterwards I rooted and unlocked my device and now I am at Alien #4 with stock kernel.
Any hint? I wanna flash this kernel and it says i need 1.97 radio so I'm not sure.
Click to expand...
Click to collapse
Go into phone settings-> about phone and tell us what your baseband. Pretty sure the 1.97 radio comes with alien and stock gb from att.
I have N_01.77.30P as Baseband version
That should be the latest radio.
Great! thanks... I'll flash the kernel and OC away!
I am also thinking about a similar question. My phone is Atrix Asian Retail version. I rooted, unlocked and installed Alien #4 straight out of stock 2.2.2. I saw that my radio is 1.95.
I want a reliable and not too much battery consuming kernel. Can you suggest me which one is the best?
A lot of folks on alien, myself included are running faux123's kernel. I can't tell you if there will be any issues with your experience in your market, but my own anecdotal experience suggests that it is the most popular non stock kernel at the moment.
> I have N_01.77.30P as Baseband version
You should keep your radio. Despite its numbers, this is the latest one.
Is it safe to flash N_01.100.00R radio on N_01.95.00R International Atrix with Alien Build 4 Rom System Version 4.5.91.MB860.ATT.en.US?
I have a Bell Atrix and i flashed N_01.100.00R radio without any problem.
Just to be on safe side download and backup ur current radio and flash back to it if u face any problems (mostly changing radio result in better or worse data and signal strength.
xateeq said:
I have a Bell Atrix and i flashed N_01.100.00R radio without any problem.
Just to be on safe side download and backup ur current radio and flash back to it if u face any problems (mostly changing radio result in better or worse data and signal strength.
Click to expand...
Click to collapse
Thanks!
Btw do you know if installing CM7 from 2.3.4 has any issues with the GPS? Cause I have that problem on those roms (like Neutrino and NottachTrix)...
well Neutrino is striped down version of CM7 so yes the problem will be there.