[MOD]^^^[9/28]**AOSP Modifier **Virtuous OC**Tiamat**Set I/O**^^^ - HTC EVO 3D

AOSP Modifier
Updated to version 2.0
Removed bcblend kernel(Bluetooth not working)
Added tiamat's kernel
Control Script Settings
Virtuous oc settings
Virtuous oc enable/disable
Set I/O Scheduler
Enable clean up on boot (Clears LOST.DIR and .trash on sdcard and clears dalvik and caches)
Tested on the latest MIUI Rom.
NEW
Set I/O Scheduler In the control script allows you to pick the default i/o scheduler and shows available i/o schedulers and current scheduler.
Must reboot before setting takes effect
The list shows which one is active with [ ] around the active one so it will look like this with sio:
0 performance
1 [sio]
2 conservative
...
Usage:
Flash zip file
Run terminal type "su" without the quotes
Then type "voc" without the quotes
Make your selections
You MUST enable virtuous oc before and freq settings will work and everything is remembered on reboot.
Enjoy​

My goodness, aren't you a man on a mission!
Sent from my PG86100 using XDA App

Tgood looking out
call me Mr.Chow

So if i flash this, then flash Tiamat 1.0.3 over it, will it keep all your scripts and tweeks intact?
I like Tiamat b/c of the Lagfree governer and the dim leds mod
EDIT**
How would I go about lowering OC to 1512? My phones doesnt seem to like anything higher than that. I'm guessing if you're using a script, setcpu will have a conflict??

DDiaz007 said:
My goodness, aren't you a man on a mission!
Sent from my PG86100 using XDA App
Click to expand...
Click to collapse
I like them FAASSTTT. And i like tweaking ****, lol.

How would this conflict with CM7 due to the native CPU settings?
& I was wondering if your dual core mod would be supported on AOSP as well?
私の"DU4L C0R3 SH00T3Rは"³Dであなたを撃墜!トゥパックをねじ込みます 。
"AOSPのBACK!" ┌П┐[◣_◢]┌П┐

smokin1337 said:
I like them FAASSTTT. And i like tweaking ****, lol.
Click to expand...
Click to collapse
LOL Same here ima give it a go

r0cky0790 said:
How would this conflict with CM7 due to the native CPU settings?
& I was wondering if your dual core mod would be supported on AOSP as well?
私の"DU4L C0R3 SH00T3Rは"³Dであなたを撃墜!トゥパックをねじ込みます 。
"AOSPのBACK!" ┌П┐[◣_◢]┌П┐
Click to expand...
Click to collapse
I dont think it will effect it. And idk about dual core yet
Sent from my PG86100 using xda premium

smokin1337 said:
I dont think it will effect it. And idk about dual core yet
Sent from my PG86100 using xda premium
Click to expand...
Click to collapse
Ok then I may give it a spin. Do you think your dual core mod was one of your better mods. I hear alot of negative comments towards enabling the dual core.
Sorry to throw your thread off topic. I just want to hear your input since you were the first (to my knowledge) to bring it to the 3D.
私の"DU4L C0R3 SH00T3Rは"³Dであなたを撃墜!トゥパックをねじ込みます 。
"AOSPのBACK!" ┌П┐[◣_◢]┌П┐

This...my phone just doesn't do over 17. GRRR... Maybe you could throw up a version with 1512 range? Thanks for doing all that you do and glad to see you on the MIUI train for a bit!!!
How would I go about lowering OC to 1512? My phones doesnt seem to like anything higher than that. I'm guessing if you're using a script, setcpu will have a conflict??[/QUOTE]

Thanks alot smokin, I just flashed after a backup and the MIUI is running smooth as ever. Quadrant has improved as well.
****'ll Buff Out

chrisfales said:
This...my phone just doesn't do over 17. GRRR... Maybe you could throw up a version with 1512 range? Thanks for doing all that you do and glad to see you on the MIUI train for a bit!!!
How would I go about lowering OC to 1512? My phones doesnt seem to like anything higher than that. I'm guessing if you're using a script, setcpu will have a conflict??
Click to expand...
Click to collapse
Setcpu should work fine with it, the script only sets it once. After that it can be changed. You could edit the script [email protected] /system/etc/init.d/02tweaks edit the number in the line that ends with scaling_max_freq.
Sent from my PG86100 using xda premium

Damn. Very nice smokin!
Sent from the CMheaven powered 3d

Edit: Nevermind

I would love to see this done with Tiamat 1.0.3

Flashed this on the latest stable MIUI, and I'm stuck at white screen . Help?

LiquidSolstice said:
Flashed this on the latest stable MIUI, and I'm stuck at white screen . Help?
Click to expand...
Click to collapse
If ya have adb just plug in your phone and type adb reboot recovery then reflash MIUI. I am running the latest and this with no issues. I am adding tiamat and removing bcblend for now cause bluetooth works on tiamat.

smokin1337 said:
If ya have adb just plug in your phone and type adb reboot recovery then reflash MIUI. I am running the latest and this with no issues. I am adding tiamat and removing bcblend for now cause bluetooth works on tiamat.
Click to expand...
Click to collapse
Well, I just reflashed MIUI, but I haven't left recovery yet; is the Tiamat version already finished? If so, I don't mind waiting in Recovery for a bit if you're upping it
EDIT: Also, just wanted to say that my phone can't do anything higher than 1728. I tried to look through the scripts, but I couldn't find where you've set the Max freq?

LiquidSolstice said:
Well, I just reflashed MIUI, but I haven't left recovery yet; is the Tiamat version already finished? If so, I don't mind waiting in Recovery for a bit if you're upping it
EDIT: Also, just wanted to say that my phone can't do anything higher than 1728. I tried to look through the scripts, but I couldn't find where you've set the Max freq?
Click to expand...
Click to collapse
/system/etc/init.d/02tweaks and i am finishing it now i added a few things and i am testing them out now.

V2.0 added to op.

Related

Does no one.use smartass on kernels anymore

Wasnt that good for battery and good screen off setting?
sent covered.in venom from my viper 3D
xyojimbox said:
Wasnt that good for battery and good screen off setting?
sent covered.in venom from my viper 3D
Click to expand...
Click to collapse
that is a custom gov for custom kernels, and since HTC released a broken kernel source, it'll probably be a while before we see it. For not, get setCPU and set a screen off profile, if you want.
il Duce said:
that is a custom gov for custom kernels, and since HTC released a broken kernel source, it'll probably be a while before we see it. For not, get setCPU and set a screen off profile, if you want.
Click to expand...
Click to collapse
Ok cool thank you
sent covered.in venom from my viper 3D

[MOD]Updated-8-30-PowerSave CPU Manager-W/Dual Core Support

Well with all the dual core stuff going on i figured it would be good to make this flashable so it can be used with anything. So here it is, All the credit goes to mike1986 for this technology found in his sensation rom here: http://forum.xda-developers.com/showthread.php?t=1098849 and -viperboy-
On to the good stuff, what this mod does.
It controls your cpu's for a good balance between power and performance by changing the following:
Enables the second cpu while phone is awake
Sets cpu frequency and governor for second cpu
Sets cpu frequency and governor for first cpu
While the phone is sleeping it underclocks the first cpu to 384000 and sets the governor to conservative, also disables the second cpu.
When the battery gets below 25% it will disable the second cpu and underclock the first cpu to 702000 and set the governor to conservative.
With this you don't need to use any other cpu managers ie., virtuous_oc, setcpu, etc.
The file can be edited at /system/xbin/pcm and init.d needs to be enabled on your rom.
Post any ideas or problems you have.
EDIT: I fixed the invalid argument problem occuring in logcat. It was happening cause it kept writing to the file when it was already changed. Fixed it by adding a check.
Users experiencing lag please try the new upload (PCM-DualCore1.1-signed.zip) and see if it works better and post results. Thank You.
Changes:
If you use virtuous oc daemon, i added a file that will work with it. It simply enables the second cpu and underclocks it while its sleeping. It can be used with any other cpu manager because it doesn't effect the first cpu core at all.
Awesome, thanks so much!! This will come in REAL handy!!
Sent from my PG86100 using xda premium
Dual core is awsome!!!!!! Thank you sir!
hTc Evo [3D]
Yes thank you for this
Sent from my PG86100 using xda premium
Yes Thank you for this, I understand everyone here has some computer's background but for guys like me?
I mean, I downloaded this file, what do I do with it?
How do I flash it and activate it?
Some help or a page of instruction would do good here.
Thanks.
luckylui said:
Dual core is awsome!!!!!! Thank you sir!
hTc Evo [3D]
Click to expand...
Click to collapse
So you've noticed a difference?
Sent from my PG86100 using xda premium
Thanks for this. As with everything though, I like to have a clear path back... To be able to turn it off. Would I have to reflash the ROM I'm using to go back? Also, I assume this would work on 2.3.4 ROMs.
Sent from my PG86100 using xda premium
Tiffany84 said:
So you've noticed a difference?
Sent from my PG86100 using xda premium
Click to expand...
Click to collapse
There are some differences. That's what we've been working on pretty much all day.
Sent from my PG86100 using Tapatalk
mikeyxda said:
Thanks for this. As with everything though, I like to have a clear path back... To be able to turn it off. Would I have to reflash the ROM I'm using to go back? Also, I assume this would work on 2.3.4 ROMs.
Sent from my PG86100 using xda premium
Click to expand...
Click to collapse
Just NAND backup before flashing
So, our phones should now have true dual-core integration/hw acceleration? Or am I mistaken?
Leo does this work with 2.3.4. My bad wrote this before the others was posted.
Rooted 3D shooter in full affect
interested in this...
sorry for the noob question, but what do you mean it enables the second cpu? weren't we using both cpu's all this time? isn't that the point of dual processors?
on the other end of things...can the file be editing for more aggressive underclocking when the screen is off, and other steps in between?
Its a huge difference w dual mode! Way way faster at opening things.
hTc Evo [3D]
Max_Pain said:
interested in this...
sorry for the noob question, but what do you mean it enables the second cpu? weren't we using both cpu's all this time? isn't that the point of dual processors?
on the other end of things...can the file be editing for more aggressive underclocking when the screen is off, and other steps in between?
Click to expand...
Click to collapse
It's not a synchronous core. Meaning it only calls on the second core when needed. This hack forces both cores to run all the time when the screen is on.
What are the benefits? Eh. Well have to see. I think HTC set it up the way it is because it's better on battery. I'm interested on a little more info as well though.
Most people from the synergy rom nighties say it has no real difference. Besides...1.2ghz is fast enough for just about every application short a few games even on a SINGLE core
METHOD1911 said:
Leo does this work with 2.3.4. My bad wrote this before the others was posted.
Rooted 3D shooter in full affect
Click to expand...
Click to collapse
I wasn't talking about working on this script. Misfit and I have been working on chanting the ramdisk and creating a similar script. But yes it will work on any firmware due to its hardware related more than firmware.
Also, its fast for sure. But it needs to settle in too.
Sent from my PG86100 using Tapatalk
Leoisright said:
I wasn't talking about working on this script. Misfit and I have been working on chanting the ramdisk and creating a similar script. But yes it will work on any firmware due to its hardware related more than firmware.
Also, its fast for sure. But it needs to settle in too.
Sent from my PG86100 using Tapatalk
Click to expand...
Click to collapse
So when the screen is on...does it run both cores at the same clock speed with same governor?
So I went ahead and flashed this. I'm running viper ROM and silverneedle 1.0. I use system panel, and it appears that even after flashing this that core 2 is only being called on when needed. Core 1 is still handling most of the load.
Here's the monkey wrench. The rom supports init.d and also has oc daemon built into it. However, if you use a different kernel than stock on viper it stops the daemon from automatically running on startup. Could this be the same case here?
well I looked at the code and it looks alright. similar to my SetCPU profiles.
I might modify it a little though. i'm on a 4000mAh battery so I don't need powersaver to kick in at 25%
will use it all day tomorrow and report at night.
Could someone please post before and after quadrant or smartbench scores?
Most apps are not multithreaded so they will only use one CPU anyway. Turning the second one on is going to do nothing but drain the battery and it won't result in any increase in speed.
Thanks,
Mike
Sent from my PG86100 using xda premium
Success100 said:
It's not a synchronous core. Meaning it only calls on the second core when needed. This hack forces both cores to run all the time when the screen is on.
What are the benefits? Eh. Well have to see. I think HTC set it up the way it is because it's better on battery. I'm interested on a little more info as well though.
Most people from the synergy rom nighties say it has no real difference. Besides...1.2ghz is fast enough for just about every application short a few games even on a SINGLE core
Click to expand...
Click to collapse
Your not supposed to have the ocdameon, and this script running at the same time. If you are, that would be your problem, as they both will be contradicting eachother. You can only have one, or the other. It says this in the OP, to not have anything else controlling the CPU, but this script. You should prolly flash a different kernel without the dameon, then check it again with CPU master.
Sent from my PG86100 using xda premium
This works with Synergy/Viper ROMS correct? Interested in flashing this and seeing how much battery life it'll save...

[Kernel/AOSP]Twisted Shooter v1 (11/8/11)

Table of contents:
Intro
Features/what this includes
Disclaimer
Latest kernel
Methods of flashing
Recommended apps
Locating cpu% Eaters && other negative items towards battery life
Notes
Source
Credits
Intro: I'm pwnyourace, this is only my second kernel to be released to the public, i made the umph kernel for the motorola triumph. I'm really still getting my feet wet with making kernels so yea, alot of my stuff will be based on others work, but credit is always given if it can be found.
What this includes
Based on Tiamats 8x60 branch, ill try to get the main points of the tiamat kernel also for those that arent familiar with it
OC up to 1944MHZ (tiamat)
SQLB (tiamat)
Simple IO, BFQ, V(R) I/O schedulers (tiamat)
Smartassv2, Lagfree govs (tiamat)
Tun, Cifs (tiamat)
Expose the vdd_sc values to the sysfs userspace (tiamat)
Snapdragon opts (ziggy)
Toasts updated GPU drivers (toastcfh duh)
Toasts new touchscreen drivers (toastcfh duh again)
3D and 2D overclocked
ZRAM
ZCache
Swap support enabled
Disclaimer: What everyone else puts in kernel threads, about me not being responsible, ect.
Latest kernel
Twisted_Kernel-v1_Evo3D
Methods of flashing
Joeykrim's "flashimage gui" app on the market using one of the zImage files from the zips
(To be added soon) Teamwin's "Kernel manager" app on the market.
Flashing via recovery using one of the zips here.
Recommended apps =)
CPU Master (personally what I use)
Nofrills - App to manage I/O scheduler, clock speeds & governors.
Adw ex or go launcher ex
Colorize widgets - Great widgets to replace the lpp ones for those converting to other launchers.
AppMonster(pro or free) - Great backup utility, automatically backs up all apps.(I like it better than TB)
GPS Status - Great application for finding satalites near you and helping get a quick lock.
Any go dev team app - Great dev team, all their apps are worth looking at.
Locating cpu% eating applications.
When in ADB shell type the following
top |grep app
or if your rom supports it htop is much better(Without grep, so just "htop")
Then look for items with high amounts of cpu% while the phone is idle.
changelog:
v1 Initial Release
Notes:
Will most likely stop mooching off tiamat and base this off the cm kernel when it get merged
Source
My github may be a few days behind or few commits behind sometimes
Credits:
Toastcfh for his amazing work with CM on the evo3d
Scaryghoul for being an inspiration and for the rubric for this thread
Tiamat for the base kernel
Josephmother for his help and answering my questions (before he retired)
Cyanogenmod for the amazing work they do period. lol
FIRST but good job, trying it out now
reserved for mee future
edit: nvm..lol
its what I want,thx
congrats
Omg, thank u so much for bringing multi touch back on CM7.
Swyped from my eVo 3d
Its always good to see more kernels around.
hTc 3D
Nice
Sent from my PG86100 using XDA App
Welcome and thanks!
Will have to try this out on MIUI
kernel is running great. nice and smooth.
Running great except getting random reboots
Swyped from my eVo 3d
ryanalan82 said:
Running great except getting random reboots
Swyped from my eVo 3d
Click to expand...
Click to collapse
R u overclocking? Try clocking it down maybe ur phone can't handle it. I've been running at 1912mhz for almost all week and I haven't gotten one random reboot
Sent from my PG86100 using xda premium
I'm getting great battery life on this kernel.. so far better then the rest of the AOSP kernels. That's with the smartassv2 gov. Good job!!
Been running for a couple hours on miui, so far so good.
Sent from my 3vo using Tapatalk Pro!
Yeah I'm a always o/c to 1728 no problem any other time. I did turn it down too, and what had between going on is freezing and the screen getting strange while playing shadow gun and samurai 2. Other times there are just random reboots. I'm just going to assume the new screen improvements that caused this. So I went back to tiamat kernel sadly.
Swyped from my eVo 3d
ryanalan82 said:
Yeah I'm a always o/c to 1728 no problem any other time. I did turn it down too, and what had between going on is freezing and the screen getting strange while playing shadow gun and samurai 2. Other times there are just random reboots. I'm just going to assume the new screen improvements that caused this. So I went back to tiamat kernel sadly.
Swyped from my eVo 3d
Click to expand...
Click to collapse
Alright man I'm sorry to hear that. The new drivers have been working great for me, my keyboard has completely stopped constantly not letting me press letters and the new gpu drivers like doubled my fps in quad when it does the 2d and 3d tests.
Sent from my PG86100 using xda premium
Just flashed twisted using miui will see how it goes.
Sent from my PG86100 using xda premium
pwnyourace said:
R u overclocking? Try clocking it down maybe ur phone can't handle it. I've been running at 1912mhz for almost all week and I haven't gotten one random reboot
Sent from my PG86100 using xda premium
Click to expand...
Click to collapse
What kind of battery life do you get with 1.9 GHz?
Sent from my PG86100 using xda premium
donniezazen said:
What kind of battery life do you get with 1.9 GHz?
Sent from my PG86100 using xda premium
Click to expand...
Click to collapse
Well, I'm a pretty heavy user but I'm home alot so battery life isn't all that much of an issue. But today I unplugged at 100% at about 10am and my phone died about an hr ago. Mind you I've listened to my Google music for a good few hrs out the speaker on Max vol and text and am on the internet nonstop lol. Ill try my best to be an average user tomarrow and report battery stats
Sent from my PG86100 using xda premium
This kernel rocks. Hope you keep development going. I got a2sd working on miui with this! It doesn't work on other kernels. MIUI is now a 2.3.7 rom so I don't know if that changes anything. It still works great!
Sent from my 3vo using Tapatalk Pro!

[KERNEL][SENSE] Ziggy471 Vigor GB Kernel

NOTE: If you have issues with WiFi, IT IS NOT DUE TO THE KERNEL, but due to the ROM you are running.
The kernel is now online....sorry, was working on a new server for us, we should have a ROM here soon too.
Features:
Low Power BCM Bluetooth mode
Backported 2.6.38 autogroup
Backported 2.6.38 ck3 patchset
Lagfree governor with fully functioning sysfs
Overclocked to 1.83GHz
Slight under-volting
In-Call recording
Sysfs vdd interface
Properly scales second processor without perflock and using stock mpdecision
Kernel
Z
saved..............
Ziggy's at it again, can't wait till we can test this!
Sent from my Xoom using xda premium
Already a great start! Just need s-off and ill be happy to give this one a run.
Sent from my ADR6425LVW using xda premium
Can't wait for soff. This sounds sweet
Sent from my ADR6425LVW using XDA App
making me jealous i don't have s-off i even powered off to check again when i saw this post
Ahhhhhhhh....Zigfy no **** brotha LOL....here we go fellas. Were just gettin started. Thanks man. Just made my night
Sent from my ADR6425LVW using Tapatalk
how high do you think the vigor can OC to stable??
combatmedic870 said:
how high do you think the vigor can OC to stable??
Click to expand...
Click to collapse
the most i've seen any msm8660 device overclocked it 1.99 ghz which is what vigor has
JoelZ9614 said:
the most i've seen any msm8660 device overclocked it 1.99 ghz which is what vigor has
Click to expand...
Click to collapse
but you guys are awesome! we gotta get 2.0 stable!!!
combatmedic870 said:
but you guys are awesome! we gotta get 2.0 stable!!!
Click to expand...
Click to collapse
Shouldn't be a problem, I'll start playing some more with it, I'm sure Virus will be happy too, since it's the same processor on the 3D.
Z
ziggy471 said:
Shouldn't be a problem, I'll start playing some more with it, I'm sure Virus will be happy too, since it's the same processor on the 3D.
Z
Click to expand...
Click to collapse
Do u got one Zigg? Or are u just Devin for it? Man this a great news!
Sent from my ADR6425LVW using Tapatalk
ziggy471 said:
Shouldn't be a problem, I'll start playing some more with it, I'm sure Virus will be happy too, since it's the same processor on the 3D.
Z
Click to expand...
Click to collapse
that would be sweet, i read that its only stable to 1.7.....thats what everyone keeps telling me as well. I dont think ive seen a phone yet hit the 2.0 barrier on a dual core!
what are the steps you use on your kernel. I know the stock goes from 1.18 straight to 1.5. did you change that so it atleast has 1.2,1.3 and 1.4? it also goes from 192 straight to 384. do you add a 200 in there at all. I think that would help with power savings. especially when it comes to haves a screen off profile. The phone gets a little laggy when you have it set to just 192mhz for screen off. its better when its 192-384mhz. But having a 290 or something in there would help out im sure and save a little bit of juice due to being able to set it to 192-290 or what not.
just wondering. i thought the stock kernel on the phone was a little odd in them regards. it really likes 1.5 and really hates 192mhz.
Yeah i haven't been able to get the evo 3d s3 to overclock past 1.7 without rebooting.
Sent from my ADR6425LVW using xda premium
fernando sor said:
Yeah i haven't been able to get the evo 3d s3 to overclock past 1.7 without rebooting.
Sent from my ADR6425LVW using xda premium
Click to expand...
Click to collapse
Well everyone's device handled the OC differently right? Like I was able to get up to 1.83 with no reboots, where some couldn't get above say 1.7 .....it seems as if some of the devices out there had higher capabilitys than others.
Sent from my ADR6425LVW using Tapatalk
fernando sor said:
Yeah i haven't been able to get the evo 3d s3 to overclock past 1.7 without rebooting.
Sent from my ADR6425LVW using xda premium
Click to expand...
Click to collapse
reverepats said:
Well everyone's device handled the OC differently right? Like I was able to get up to 1.83 with no reboots, where some couldn't get above say 1.7 .....it seems as if some of the devices out there had higher capabilitys than others.
Sent from my ADR6425LVW using Tapatalk
Click to expand...
Click to collapse
It all boils down to voltage, some devices require more voltage than others, some require less. My 3D handles 1.83 all day long, but I had 3D's running at 1.83 LONG before I even had one, remember, I'm on Verizon.
Z
ziggy471 said:
It all boils down to voltage, some devices require more voltage than others, some require less. My 3D handles 1.83 all day long, but I had 3D's running at 1.83 LONG before I even had one, remember, I'm on Verizon.
Z
Click to expand...
Click to collapse
Well good to have you on the rezound zigg
Sent from my ADR6425LVW using xda premium
reverepats said:
Well everyone's device handled the OC differently right? Like I was able to get up to 1.83 with no reboots, where some couldn't get above say 1.7 .....it seems as if some of the devices out there had higher capabilitys than others.
Sent from my ADR6425LVW using Tapatalk
Click to expand...
Click to collapse
Yeah I noticed some stated they could clock to that
Sent from my ADR6425LVW using xda premium
You would think duel cores would be more overclockable... I can oc my Inc2 to 1.8 all day long and be stable... But I run stock speeds anyways so no biggy, but ill definatly be using zigs kernels in my roms...
Sent from my Htc Rezound using taptalk pro
ziggy471 said:
It all boils down to voltage, some devices require more voltage than others, some require less. My 3D handles 1.83 all day long, but I had 3D's running at 1.83 LONG before I even had one, remember, I'm on Verizon.
Z
Click to expand...
Click to collapse
Jeez I didn't even know you were on Verizon the entire time. I thought u were on sprint LOL...ahh well. Pretty stoked about this.
Sent from my ADR6425LVW using Tapatalk

overclock

this may be dumb, but is there an app or something that can tell me where im clocked at? I think I'm supposed to be at 1.5 ghz
Sent from my PG86100 using XDA
tammyjustin said:
this may be dumb, but is there an app or something that can tell me where im clocked at? I think I'm supposed to be at 1.5 ghz
Sent from my PG86100 using XDA
Click to expand...
Click to collapse
SetCPU, System Tuner etc. You need to have a custom kernel in order to change cpu speeds. If you're not sure whether you have a custom one or not, try installing one of those apps and if you're able to change cpu settings, you're on a custom kernel. congratulations
thanks man...i am on a custom. I just want to know if im running at 1.5ghz like im supposed to, or does it not run at that all the time?
Sent from my PG86100 using XDA
tammyjustin said:
thanks man...i am on a custom. I just want to know if im running at 1.5ghz like im supposed to, or does it not run at that all the time?
Sent from my PG86100 using XDA
Click to expand...
Click to collapse
That depends on which governor you choose. I'm going to go ahead and guess you're on an Anthrax kernel. Each governor behaves differently, but only the performance governor locks your phone to the max speed you selected. I'd recommend intellianthrax or interactive, I personally use intellianthrax or lagfree. Lagfree is a really good one IF you don't overclock, but since you want to run at 1.5 ghz, I'd stay away from lagfree. If you use lagfree, your phone will rarely ever drop the clock speed down below 1 ghz when it doesn't need it.
Sent from my PG86100 using XDA
am I overclocked? and seriously I dont know, I have no clue....new to overclocking
Sent from my PG86100 using XDA
do I have a governor? how can I check and where can I find one? again thanks, I know dumb but thanks
Sent from my PG86100 using XDA
tammyjustin said:
am I overclocked?
Click to expand...
Click to collapse
Yes. 1.2 is normal.
tammyjustin said:
am I overclocked? and seriously I dont know, I have no clue....new to overclocking
Sent from my PG86100 using XDA
Click to expand...
Click to collapse
Yes you are overclocked. 1.18 GHz is the stock CPU speed for our phones, so any number over 1.18 for the max frequency is overclocked
tammyjustin said:
do I have a governor? how can I check and where can I find one? again thanks, I know dumb but thanks
Sent from my PG86100 using XDA
Click to expand...
Click to collapse
You are always using a governor, even if you don't have an app for it. The governor tells the phone how to use your CPU, basically. See where it says "ondemand" in that screenshot you posted? Well, ondemand is the governor you're using. If you click ondemand, there should be a drop down menu that opens up that gives you all the governor options available for the kernel you're using
thanks man
Sent from my PG86100 using XDA
I like to use the virtuous overclock deamon, it is said to work better. But most roms have not implement it here.
tammyjustin, I assume you're using MeanROM since 486MHz-1512MHz / Ondemand governor are the default settings built into that ROM. I just started playing around with Anthrax kernels and MeanROM a few days ago.
A word of advice if you're going to be playing with overclocking... You need to be aware that you shouldn't use any overclocking tools like SetCPU with MeanROM unless you modify a system file first to disable the built-in clocking and voltage controls, or you can use only the built-in controls. I was getting strange instability with MeanROM before I realized what was going on with the internal clock management and SetCPU (which I have always used). Basically SetCPU and the internal clock controls in the ROM were both trying to manage the clockspeed and it was causing stability problems. Now I'm using only the internal settings and it is far more stable.
MeanRom ICS 2.4
Hey. I have been using meanRom for a while now, and the newest version (MeanROM ICS v2.4) is eating my battery too quickly. I was wondering if there was a way to disable dual cores all the time or reduce the processor speed to try and save some battery. I have never attempted to change max speed or change the number of cores being used before so i really don't know where to start.
I saw in inbREDed 5.2.5 they have a "Core control in quicksettings, change to dual/single core on the fly". Is that available to use in MeanROM?
Any help would be appreciated.
igiddyuup said:
Hey. I have been using meanRom for a while now, and the newest version (MeanROM ICS v2.4) is eating my battery too quickly. I was wondering if there was a way to disable dual cores all the time or reduce the processor speed to try and save some battery. I have never attempted to change max speed or change the number of cores being used before so i really don't know where to start.
I saw in inbREDed 5.2.5 they have a "Core control in quicksettings, change to dual/single core on the fly". Is that available to use in MeanROM?
Any help would be appreciated.
Click to expand...
Click to collapse
I think Mikey has it set to dual core with screen on, single core with screen off.
Sent from my ICS 3VO with Tapatalk 2
coal686 said:
I think Mikey has it set to dual core with screen on, single core with screen off.
Sent from my ICS 3VO with Tapatalk 2
Click to expand...
Click to collapse
Yes that is correct. but I text a lot and don't need dual core while sending texts. I have to charge my phone twice a day right now. =\
I was hoping I could on the fly turn on / off dual cores or change the CPU speed.
With previous versions of MeanROM I only had to charge my phone at night. I have thought about down grading, but it's pretty stable right now, i just want better battery life. So that is why I wanted to change the CPU settings.
igiddyuup said:
Yes that is correct. but I text a lot and don't need dual core while sending texts. I have to charge my phone twice a day right now. =\
I was hoping I could on the fly turn on / off dual cores or change the CPU speed.
With previous versions of MeanROM I only had to charge my phone at night. I have thought about down grading, but it's pretty stable right now, i just want better battery life. So that is why I wanted to change the CPU settings.
Click to expand...
Click to collapse
Mikey did say something about his next version (which will be based on the Sprint OTA when it finally arrives) will dial back performance a little to extend battery life. Maybe this is what he has in mind.
Here's my 2 cents.... Overclocking is great for speed but it cripples battery life. I used to be obsessed with OC and quadrants, but then I realized I can't tell a difference from 1.2 GHz to 1.8 GHz. OC can also make your phone unstable. Honestly you probably wouldn't need to over clock if you don't know much about it. So I wouldnt spend too much time worrying about it
Do what you want though cause that's just my opinion
tammyjustin said:
thanks man
Sent from my PG86100 using XDA
Click to expand...
Click to collapse
by stock kernel from ICS , we can overclock ?
saeedk64m said:
by stock kernel from ICS , we can overclock ?
Click to expand...
Click to collapse
No. The stock kernel is not overclockable.
Sent from my ICS 3VO with Tapatalk 2

Categories

Resources