hey, i overclocked to 806mhz using PaoloM70's OC Gingerbread kernel and my phone crashes very often... i'm using stock GB rom... even if i use 745 or 768 it chashes within a few hours... please help me.. should i install franco.kernel or use some different kernel for smoot functioning of my o1.. ??
umangleekha said:
hey, i overclocked to 806mhz using PaoloM70's OC Gingerbread kernel and my phone crashes very often... i'm using stock GB rom... even if i use 745 or 768 it chashes within a few hours... please help me.. should i install franco.kernel or use some different kernel for smoot functioning of my o1.. ??
Click to expand...
Click to collapse
The only thing u can do is use lower frequencies.
Sent from my LG-P500 using XDA App
Franco.kernel
Sent from my LG-P500 using xda premium
How much you can over-clock really depends from device from device. Some O1s are lucky and can OC to 806 but some never make it pass 729. Give Franco a try (its an awesome kernel regardless) but if it doesn't work it probably just mean that your phone can't OC to 806 (like mine) and just stick with something at a lower frequency.
If you install setcpu then it comes with a stress test. Use it to find out which frequency is the most stable for you.
what about governers ? if I use smartass it crashes while playing games.. and with ondemand, it feels stable.
Related
Could anybody owning a P500 run and post the results of the P500 in Neocore benchmark? I could not find it anywhere.
Thanks.
Standard kernel 44fps w/o touch display, but 15fps with touch.
OC kernel 748mhz 55fps / 24fps.
There display driver issue.
Sent from my LG-P500 using Tapatalk
Where canI get OC kernel?
Sent from my LG-P500 using XDA App
Development section, drellisdee created and uploaded oc kernel
Sent from my LG-P500 using Tapatalk
I flashed my P500 with CyanogenMod7 Mik_os and OC with setCPU on 245/806 Mhz and its stable and i get 59 fps and with touch 45!!! O.O
This is the best phone EVER!!! It runs Heavy Gunner 3d smooth now! framerate drop ocassionaly tho, but before flash it was bearly playable!!! ;D
this is at oc 787
smartassv2 governor
best i have got is 56fps
at 806oc
with min/max governor
at 480/600 mhz, this is what i get for each governor:
min/max: 56.5
scary: 56.1
smartassv2: 56.5
savagedzen: 55.8
interactivex: 55.6
ondemand: 54.9
performance: 56.5
sweetnsour said:
at 480/600 mhz, this is what i get for each governor:
min/max: 56.5
scary: 56.1
smartassv2: 56.5
savagedzen: 55.8
interactivex: 55.6
ondemand: 54.9
performance: 56.5
Click to expand...
Click to collapse
woah high scores u have there
and 55 on interactivex?
ur using megatron?
viv_jen said:
woah high scores u have there
and 55 on interactivex?
ur using megatron?
Click to expand...
Click to collapse
nope. i am using andy's phoenix rom, which in my opinion is the best rom out here performance-wise
The best Neocore scores are available with mik 6.6.1 ROM and crosses 70.0 and may reach 74-75 with smartass governor. With mik 6.5.7 and fserve .v19.4-gbs.v18a-cfs, I get around 62. IMHO mik 6.5.7 and fserve .v19.4-gbs.v18a-cfs are the best available ROM and Kernel for P500 in terms of battery life, performance and stability.
mik_os CM7 v6.6.1 @ 480/729 - smartassv2
latest franco's kernel
with sound:
- normal: 60.1
- touching: 43.6
without sound:
- normal: 63.8
- touching: 54.8
I really wanted to test Andy's latest ROM, but seems some more bugs have to be fixed. I will try it once it's bug free. As of now miks 6.5.7 is totally bug free, stable and powerful with fserve gbs kernel. The scores I get are with 480/768 smartass. Battery life is AWESOME! Goes on for more than 2 full days with moderate usage!
My best result is 76fps on mik's cm7 6.6.1 with franco's. 35 kernel
Oc'ed at 480 min 730 max @ smartass.
Sent from my LG-P500 using XDA App
I am not pleased with my Phone performance. I wanna set it to 769 MHz. Any good app there?
hey
use andy rom or mik rom 6.6.1 which is built in pure performance plus battery
and if you are thinking that what can I do with that rom which has lot's of bug
then think again becuase it's not big deal for performance and battery
Use setcpu.
Sent from my LG-P500 using XDA App
But as aspee said.if you want performance, then use mik's cm7 6.6.1 + Franco's kernel.
Sent from my LG-P500 using XDA App
I got some problems with it, no service, please help!
uh baseband old or new?
i dont use setCPU am using the built-in one on mik OS cm7 6.5.7 when on standby and of normal usage i OC it at max:600 min:480 and when am browsing the net(using Opera Mini i prefer speed i dont need need flash **** ) OC at max:672 min:480 and when playing angry birds my OC'ing is max:691 or 710 min:480 all with smartass governor using fserve's gbs kernel v18a i only OC and set the max higher (787) for quadrant,neocore,etc use since higher OC'ing when not in use reduce battery power IMHO..
yes, setCPU is alright with openOptimus 2.2.2
Use set cpu its a good app
my phone works well at max 806/245 OC
but the HD games or any games or app apart from the default ones crash if i open them
so now my cell is at OC 787/245
with smartassv2 governor
nice performance
no frills cpu
terratrix said:
no frills cpu
Click to expand...
Click to collapse
thanks
its really better than set cpu
can you just mention which i/o scheduler should i set?
noop
or vr??
So I have my atrix rooted, running Alien Rom #4 with Fauxs Kernel! (2.6.32.9-MB860-GB-Faux123-v0.2.0 [email protected]#3) so it is supposed to let me overclock but when I use SetCPU app my only scaling options are performance and powersave and I can't get the CPU up to more than the default 1GHz. Why is that?? I was trying to overclock to 1,1 or 1,2 but it doesn't go past the 1GHz.
Someone knows what's happening here??
Sent from my MB860 using XDA App
jeffmena93 said:
So I have my atrix rooted, running Alien Rom #4 with Fauxs Kernel! (2.6.32.9-MB860-GB-Faux123-v0.2.0 [email protected]#3) so it is supposed to let me overclock but when I use SetCPU app my only scaling options are performance and powersave and I can't get the CPU up to more than the default 1GHz. Why is that?? I was trying to overclock to 1,1 or 1,2 but it doesn't go past the 1GHz.
Someone knows what's happening here??
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
That's not the overclocked kernel. You need the 1.3 one if you want to go over 1GHz.
http://forum.xda-developers.com/showthread.php?t=1156040
Oh Thanks a lot bro!
ghost_og said:
That's not the overclocked kernel. You need the 1.3 one if you want to go over 1GHz.
http://forum.xda-developers.com/showthread.php?t=1156040
Click to expand...
Click to collapse
Sent from my MB860 using XDA App
Hello All.
I am a bit new to lg - p500
I installed custom roms and kernels like francos kernel and i used valid combinations for all..Still i have touchscreen bug (lag)..
Help me fixit.
Touch screen bug means ?? Btw Which rom?? & if laggy...change ur cpu frequency to 480/729 smartass v2
Sent from my HTC-desire using xda premium
I'm using mik's CM7 port 6.5.8 and latest franco's gbs kernel modified by fserve.
The touch lag is really much reduced with this combination than in 6.6.1 + franco's gb kernel
use kernels with touchscreen bug fix
The fix only minimizes the bug which means it should be there. There is no way to completely fix it and if your using a kernel with the fix, you just have to deal with it.
Sent from my Google Nexus S using XDA App
Try void forever with fserves 18a kernel.
IMO reduces the most.
If that doesnt work switch to official 2.3.3 based roms using paulos vtouch kernel.
That is a sureshot lagfix, how accompanied by lower moderate performance.
androidforeva said:
Hello All.
I am a bit new to lg - p500
I installed custom roms and kernels like francos kernel and i used valid combinations for all..Still i have touchscreen bug (lag)..
Help me fixit.
Click to expand...
Click to collapse
The best kernel with touchscreen lag fix for o1 is paolo v6 kernel(.35).My neocore goes down 1 frame when i touch the screen(my score is 63 fps without touching thescrreen).
hello guys,
its my 2nd day with blackbird(optimus net rom ported by mattof93) now and it seems really promising!
quite impressed with its performace,responsiveness..
initally it was slow,but after flashing paulo v6 touchfix kernel it became really good!
only big bug im suffering from is that usb mass storage doesnt work
however we can go to recovery and toggle usb there and use it!
other than that really small bugs expected to be fixed like autofocus,not switching on nce battery drains to 0%(remove battery and replace) !
so here im sharing a few screenshots of the rom!
i tested neocore yesterday and score was somehwere around 60-64fps (without sound) !mind its a stock modified rom..
games like asphalt 5,dungeon hunter,nfs shift,hero of sparta etc work flawlessly and quite smoothly!
most imprtant it has darktremors a2sd working really well!
have a look at it and if u like just grab it from dev thread ..
guys please vote !!poll on top of the page
some info as provided by matt on performace by kernel :
matteof93 said:
some bench's results:
Paolo's kernel
245\729 smoothass io:deadline vsync: on
antutu: 1529
neocore: 62.4 fps
Franco's kernel:
245\729 smartassv2 io:deadline vsync: on
antutu: 1552
neocore: 61.8 fps
Zacks' kernel
245\729 lightassv2 io:deadline vsync: off
antutu: 1564
neocore: 64.3 fps
Click to expand...
Click to collapse
continuation
Lol... Barack Obama in call logs
BTW how is the battery backup.
Sent from my LG-P500 using XDA App
Battery seams normal but with 3g it drains !just like any other rom
Sent from my LG-P500 using xda premium
Do u use other cm7 based roms before ? If yes whats your opinion comparing with them ?
Zacker90 said:
Do u use other cm7 based roms before ? If yes whats your opinion comparing with them ?
Click to expand...
Click to collapse
i have used almost all the available roms!!
cm7 is cm7!!thats something different cos the entire framework and sources are different!!
however with rc2 and paulo touchfix and a few app management in hand ,i feel this rom attracts me a lot!!!
however this is just rc2!!the stable release will definitely more rocking!hope sodunno when matt is goin to release but hez working on it and has promised to never stop developing on this rom!
androidusero1p500 said:
i have used almost all the available roms!!
cm7 is cm7!!thats something different cos the entire framework and sources are different!!
however with rc2 and paulo touchfix and a few app management in hand ,i feel this rom attracts me a lot!!!
however this is just rc2!!the stable release will definitely more rocking!hope sodunno when matt is goin to release but hez working on it and has promised to never stop developing on this rom!
Click to expand...
Click to collapse
Sorry for being this irritating 'questionare' but could you test asphalt 5 for me?
what's next (RC3):
rom partially deodexed
custom framework
some changes to scripts in init.d and build.prop
new kernel
androidusero1p500 could you add a survey to decide which kernel will be used by default in the RC3?
these are the options:
rome kernel by zacks (better performance)
franco kernel (best compromise between performance and stability)
paolo's kernel (the only kernel which solve the scrolling "bug")
matteof93 said:
what's next (RC3):
rom partially deodexed
custom framework
some changes to scripts in init.d and build.prop
new kernel
androidusero1p500 could you add a survey to decide which kernel will be used by default in the RC3?
these are the options:
rome kernel by zacks (better performance)
franco kernel (best compromise between performance and stability)
paolo's kernel (the only kernel which solve the scrolling "bug")
Click to expand...
Click to collapse
Finally i am willing to flash this rom
waiting for the update
Rutuj said:
Sorry for being this irritating 'questionare' but could you test asphalt 5 for me?
Click to expand...
Click to collapse
Didn't you read what i had written in the first post?
I already tested..works great;-)
Sent from my LG-P500 using xda premium
matteof93 said:
what's next (RC3):
rom partially deodexed
custom framework
some changes to scripts in init.d and build.prop
new kernel
androidusero1p500 could you add a survey to decide which kernel will be used by default in the RC3?
these are the options:
rome kernel by zacks (better performance)
franco kernel (best compromise between performance and stability)
paolo's kernel (the only kernel which solve the scrolling "bug")
Click to expand...
Click to collapse
I think no one would compromise for the scrolling bug !so obviously I'm predicting anyone would recommend paulo 's kernel
Sent from my LG-P500 using xda premium
androidusero1p500 said:
I think no one would compromise for the scrolling bug !so obviously I'm predicting anyone would recommend paulo 's kernel
Sent from my LG-P500 using xda premium
Click to expand...
Click to collapse
i agree....anyway, please add this survey
matteof93 said:
i agree....anyway, please add this survey
Click to expand...
Click to collapse
Check your pm
Sent from my LG-P500 using xda premium
@androiduser01p500
What version of the rom are u using?
The firestorm or the ICS rom?
Ohh and +1 for paulos kernel in rc3
How are you getting 60 fps??
Im getting 50 at OC 480/729 smartass
Rutuj said:
How are you getting 60 fps??
Im getting 50 at OC 480/729 smartass
Click to expand...
Click to collapse
governor? io scheduler? kernel?
I'm using firestorm n was clocked @122-787 interactive /smartass(dun remmber xactly wich one i was usin).. paulo v6 touch kernel!with darktremor a2sd..
I get minimum 60-62fps ..with ram running at 200mb ..(don't prefer killing em)..
Also I'm using autokiller memory manager pro(plays with minfree also)from market ,it has an option called adanced tweaks too..could that be the reason?
Editrutuj the values i mentioned was without sound !also could you give feedback on your experience with the rom?
Sent from my LG-P500 using xda premium
androidusero1p500 said:
I'm using firestorm n was clocked @122-787 interactive /smartass(dun remmber xactly wich one i was usin).. paulo v6 touch kernel!with darktremor a2sd..
I get minimum 60-62fps ..with ram running at 200mb ..(don't prefer killing em)..
Also I'm using autokiller memory manager pro(plays with minfree also)from market ,it has an option called adanced tweaks too..could that be the reason?
Editrutuj the values i mentioned was without sound !also could you give feedback on your experience with the rom?
Sent from my LG-P500 using xda premium
Click to expand...
Click to collapse
Ok.
Im running firestorm using paulos v6touch kernel at 480/729 smartass, OC using setcpu.
Im also using zepellinrox's v6supercharger, aggressive settings.
The neocore came upto 56~55..The gaming is superb especially HD games.
So, will autokiller memory manager mess up with v6 supercharger settings?
p.s. - Whats the ETA for rc3 ?
Rutuj said:
Ok.
Im running firestorm using paulos v6touch kernel at 480/729 smartass, OC using setcpu.
Im also using zepellinrox's v6supercharger, aggressive settings.
The neocore came upto 56~55..The gaming is superb especially HD games.
So, will autokiller memory manager mess up with v6 supercharger settings?
p.s. - Whats the ETA for rc3 ?
Click to expand...
Click to collapse
Why do you even need autokiller when you have v6supercharger.....Its the same thing
Rutuj said:
Ok.
Im running firestorm using paulos v6touch kernel at 480/729 smartass, OC using setcpu.
Im also using zepellinrox's v6supercharger, aggressive settings.
The neocore came upto 56~55..The gaming is superb especially HD games.
So, will autokiller memory manager mess up with v6 supercharger settings?
p.s. - Whats the ETA for rc3 ?
Click to expand...
Click to collapse
yeah auotkiller mm is simialr to v6 supercharger!
but i heard supercharger is something more than amm!
however you get 55-56 without sounD?
im getting constand scores above 61fps!with 122-787mhz,around 40-60 apps installed a lot of em in there and a lot of ram constanly being used!!
like when i ran neocore i had about 180-200mb free!