Related
Turn on everything( GPS, 4G radio and such) download a new rom and play music through the speaker
I'm hoping to overheat the phone enough to evaporate all the water haha
Well I'll see how it goes and ill report back soon
Sent from my toilet dunked PG86100 using xda premium
Stick a cut off qtip in the headphone jack (so rice doesn't get jammed in there) and throw it in a plastic sandwich bag filled up with rice, will work much better. Heat + water + electronic will just fog up the screen. Leave it in a bag of rice for a few days, battery out.
Seriously. I had water dripping from my MP3 player, and it's been working for a good year after that, because of rice.
BlaydeX15 said:
Stick a cut off qtip in the headphone jack (so rice doesn't get jammed in there) and throw it in a plastic sandwich bag filled up with rice, will work much better. Heat + water + electronic will just fog up the screen. Leave it in a bag of rice for a few days, battery out.
Seriously. I had water dripping from my MP3 player, and it's been working for a good year after that, because of rice.
Click to expand...
Click to collapse
That^
It worked for my key fob that got lost in the snow for 3 months.
BlaydeX15 said:
Stick a cut off qtip in the headphone jack (so rice doesn't get jammed in there) and throw it in a plastic sandwich bag filled up with rice, will work much better. Heat + water + electronic will just fog up the screen. Leave it in a bag of rice for a few days, battery out.
Seriously. I had water dripping from my MP3 player, and it's been working for a good year after that, because of rice.
Click to expand...
Click to collapse
I've done that before but it wasn't exciting haha I thought I'd try this for some laughs but its actually working my cameras lenses that were foggy and aren't now and I keep catching some moisture in the housing
Sent from my PG86100 using xda premium
Ahhhhhhh! No no no!
Take the battery out quick quick quick! If you have water damage the first thing you do is remove power to the device! Water isn't what damages an electronic device. In fact water itself in its purest form H2O isn't even an electrical conductor. Water conducts electricity when something is dissolved in it and the ions dissociate, allowing charge to be carried through the water. Therefore if there is a salt, or something, or in this case dust, it will be able to conduct electricity, which if two points of contact in the device are shorted it can be powerful enough to destroy it.
The rice thing can sometimes work, but if the device had a lot of water get inside it there will be water in all the nook and crannies, even inside the processor. If the physical damage is already done to one or many pieces of the electronics there may not be any fixing it.
However, there is always a possibility that the ionized water is shorting circuits and hasn't damaged anything yet. If the device is to the point where it will no longer turn on, or screen appears dead you have nothing to lose in trying to fix it. I have saved several devices in the scenario I just mentioned using a mild solvent. You need to find a tear down guide to disassemble it. When you have it taken apart you can soak each individual part in isopropyl alcohol. You need to use the purest isopropyl alcohol you can find, ideally 100% isopropyl alcohol so it doesn't contain ANY water. However if you can't find a place to get that quickly, locally, for low cost use 91% isopropyl alcohol from Walmart or any drug store. I have used that concentration to successfully cure two devices that wouldn't turn on after water damage.
Put the alcohol in a large enough container that the parts fit in, and completely submerge the parts, may even need to include the battery in the solution. Leave it there about ten minutes, occasionally swirling to get the alcohol deep inside everything, processor, etc. Then remove it from the alcohol and let it AIR dry. To be ultra safe let it air dry for twenty four hours. You can then reassemble the device and test.
Alcohol is very volatile in air, so it evaporates very quickly (specially if that air is heated). Water and alcohol are miscible, so it will remove the water from inside every part. Good luck!
Just take your phone back to sprint and get another....Im going to assume you have insurance. Why take a chance that the phone could sustain some long term damage? Get a shiny brand new one and call it a day..
SBERG117 said:
Just take your phone back to sprint and get another....Im going to assume you have insurance. Why take a chance that the phone could sustain some long term damage? Get a shiny brand new one and call it a day..
Click to expand...
Click to collapse
I would agree with that but he/she might not have $100 to drop around for a new insurance replacement phone. I have heard though of some repair centers replacing water damaged phones with a sprint ordered replacement as long as the phone works.
Sad Panda is 100% correct on the alcohol, so follow his directions! Alcohol has a high affinity for water and acts as a drying agent, drawing the water out of every corner and crevice.
oldjackbob said:
Sad Panda is 100% correct on the alcohol, so follow his directions! Alcohol has a high affinity for water and acts as a drying agent, drawing the water out of every corner and crevice.
Click to expand...
Click to collapse
+1 sad panda to save the day
Sent from my PC36100 using xda premium
The only sensible thing to do would be to do what sad panda posted. What you're doing is just retarded.
I agree. I've been doing this for years on laptops. It also works well off you spill coke or tea on it. It also helps to brush off the components with a toothbrush while soaking them in alcohol.
Sent from my PG86100 using XDA App
Bag of rice will work 99.9% of the time. Depends on how much water it got will depend on how long u need to leave it in there. If it still turns on overnight should work. Take battery off and seal it up.
Sent from my PG86100 using XDA App
Hate to say it but it actually worked... No fog on the lenses, no foggy screen, capacitive buttons all work and respond, speakers sound just like they did before, I know it might just be dumb luck but it worked out and there's no visible signs of condensation I'm the phone so I'm a happy camper
I've done all the alcohol disassembling before but I only had a T6 instead of a T5 torx and I'm a broke college student so I didn't have rice so I tried my way and it worked! so continue with the bashing if you will
(Btw I have TEP but trying something new felt like a better thing to do than waste $100 on a 1.5 hboot replacement)
Sent from my PG86100 using xda premium
thatguy11285 said:
I'm a broke college student so I didn't have rice so I tried my way and it worked!
Click to expand...
Click to collapse
Dude, a bag of rice is like four dollars.
But your idea is possibly the worst thing you could do for a phone. ONLY reason it worked is because evidently the water didn't seep in enough to cause enough damage.
Running power through a wet phone is the easiest way to kill it. Don't count on it working again for you in the future, you're lucky as hell.
Wow! So happy for you that it worked, don't try it again though! Even for a broke college student a liter of alcohol is two bucks. There are lots of nice guys on here. Even I would have sent you my torx drivers for free to help you out!
Glad everything is a ok! Good job! Phew!
This is hilarious.
Sent from my PG86100 using xda premium
If you have nothing to lose put the phone in bleach. it will bleach the water strip thing back white and leave the red lines. Let it dry then take it to sprint.
but only use this as a last resort. lol
eastside08 said:
If you have nothing to lose put the phone in bleach. it will bleach the water strip thing back white and leave the red lines. Let it dry then take it to sprint.
but only use this as a last resort. lol
Click to expand...
Click to collapse
To my knowledge this won't get the sticker back to white and still maintain the original red lines. Those stickers work just like litmus paper works, they react over the neutral range of the pH scale. Bleach should react with the red chromophores but I just don't see how it will turn from solid red to anything but solid white, or worse a solid pink.
Have you personally tried that? Also bleach is chlorine + water + uhhh, hypochlorite at equilibrium. Since that is the case, the dissociation of ions have the same property as water and salt, or water and dust as I described before, so as long as one understood you are making the water damage worse, you could do that....your electronic device would likely burn up when electricity was applied again.
Just throw it in the microwave. I'd set the microwave to "defrost" though, just to play it safe.
Sent from my PG86100 using XDA App
flonker said:
Just throw it in the microwave. I'd set the microwave to "defrost" though, just to play it safe.
Sent from my PG86100 using XDA App
Click to expand...
Click to collapse
+ 1
Sent from my PG86100 using xda premium
Just letting you guys know that this phone can survive being fully submerged under hot soup for atleast 5 seconds.
Backstory:
So, I was trying to watch a youtube video ergonomically over lunch in landscape mode. Hitting the volume key with my left hand made the phone slip and fall into my soup. I was in disbelief and took me about 5 seconds to take it out. Phone was still working, I powered it off and took it home to dry for a few hours.
It seemed to manage to turn itself on when I came back to check on it (Probably accidentally powered it back on when i was putting it in rice).
And it still works! I decided to take it apart anyway to clean the internals and remove the condensation on the internal camera lense cover; it was pretty dry inside. I faced a few hiccups taking it apart; Due to the rubbing alcohol I used, the screen came off of its harness and I had to superglue it back on) and I managed to nicked the case trying to pry things out.
I decided to test how much liquid the cavities would allow. For the headphone jack the way the water traversed (from pouring rubbing alcohol into the jack) It flows to the side and into the back panel barely touching the shielded chipsets. The other cavities are pretty well sealed and those areas were dry with no salty residue except for the cavity covers.
All in all, my lumia 800 lived to see another day :victory:
what kinda soup?
poope said:
what kinda soup?
Click to expand...
Click to collapse
It was Vietnamese Pho, chicken broth basically.
Yep. On Monday I dropped my S4 in the pool and it spend a good 20 seconds underwater. It was in the deepest part of my pool and I wasn't about to jump into the cold water to get it. I have insurance and all that, so I just grabbed a net and pulled it out.
I was almost certain that this phone wouldn't be working no matter what I did. Still, I pulled the battery out the second I got it out of the water and stuck it in rice for about 24 hours. The first 10 hours or so I left it in a hot room that may have had 10% humidity, and the last 14 hours I put it in a dry, cold room.
Lo and behold this morning when I put the battery in and held the power button, it powered up! Everything works - earpiece, speaker, both mic's, notification light, proximity, IR, screen, digitizer, headphone jack, capacitive buttons/lights, home button, etc. etc. Everything works!
Pretty awesome to be honest, Wanted to gloat a bit.
Had that happen to my S3. It worked pretty good for a few days and then it would get VERY hot and battery would only last about 4 hours.
I found some corrosion on the mobo from the chlorinated pool water. Perhaps you won't have that issue but if you do, PM me and I'll let you know what drastic measure I took to fix it. I rather not put it out there to all in fear someone will do it and then blame me for any issues they have lol.
It took nothing but about $7.00 and my time.
Good luck!
video or it didn't happen.
haha jk that's awesome man!
This has inspired me to start showering with my phone.
Sent from my SCH-I545 using Tapatalk
That's a awesome story there glad it still worked I do have a question did you have a case or no if so what?
FYI, If this happens to anyone else:
If an electronic device gets dunked in water one thing you can do is to disassemble it as far as you're comfortable doing and then re-dunk the device in distilled water. The distilled water will help remove residues left behind by tap water or pool water. Works best when said device is still wet from original dunk.
Then if you have some on hand, an electronics circuit cleaner can be sprayed liberally all over and in to displace the remaining water. The cleaning solvent will evaporate much faster and safer for the device.
Then I'd stick said device in a bag of rice in a heated room. And pray. Because more often then not it won't matter what you do the device will still be ruined.
Tried to recreate the pool drop......phone DID work fine, but screen cracked when it hit the ice. Gotta love Wisconsin!
Thats such crap! i get pulled into a pool by drunk friend with the S4 in my pocket. Wasnt even in the water for 10 seconds and my S4 never ever turned on again. I guess they are not all made equal lol
0reo said:
FYI, If this happens to anyone else:
If an electronic device gets dunked in water one thing you can do is to disassemble it as far as you're comfortable doing and then re-dunk the device in distilled water. The distilled water will help remove residues left behind by tap water or pool water. Works best when said device is still wet from original dunk.
Then if you have some on hand, an electronics circuit cleaner can be sprayed liberally all over and in to displace the remaining water. The cleaning solvent will evaporate much faster and safer for the device.
Then I'd stick said device in a bag of rice in a heated room. And pray. Because more often then not it won't matter what you do the device will still be ruined.
Click to expand...
Click to collapse
That sounds like it would be a good idea, using a clean water without any minerals, chemicals, etc. in it to go ahead and flush everything out. I didn't do this. I was cleaning my pool mainly because it hadn't been touched in a while and there wasn't any chlorine in the water. Usually that's bad for a pool owner, algae, but for me this time it seems to have been a blessing.
Gator Brah said:
Thats such crap! i get pulled into a pool by drunk friend with the S4 in my pocket. Wasnt even in the water for 10 seconds and my S4 never ever turned on again. I guess they are not all made equal lol
Click to expand...
Click to collapse
It also depends on how well taken care of the water is. If it had a high chlorine level it can cause corrosion much faster than usual.
swordmastr54 said:
That's a awesome story there glad it still worked I do have a question did you have a case or no if so what?
Click to expand...
Click to collapse
Yep! I had this Cruzer-Light case on my phone at the time. It's extremely tight fitting on the device, usually peels off the back-cover whenever I take it off. I'm sure it helped because it sealed the edges along the back cover.
The water-strip underneath the battery on the phone and the strip on the battery triggered, but I didn't find any water on the SDCard or the SIM. So maybe the case helped with that a little bit.
Wow, that's amazing!
well as the tittle said, there is water in my Z2 screen......
I wash my phone on bathroom with cold water like 30 secs... then I dry it using the toal... and later i started to blow air at the buttons, like power, volume and even the speakers. later I saw some kind of transparent spot inside mi screen at the right side of the screen.... The phone works fine camera, speakers, everything is working fine... touchscreen etc. but I dont know what to do with that water. maybe hairdry? rice? what else?
You used blower and push water around side keys with high pressure air into lcd panel.
I work in mobile service center and dismantle too many xperia Z series, these are water resistance, not water proof
Never use blower again, your phone dry water itself after a few hours
pedramgolchin said:
You used blower and push water around side keys with high pressure air into lcd panel.
I work in mobile service center and dismantle too many xperia Z series, these are water resistance, not water proof
Never use blower again, your phone dry water itself after a few hours
Click to expand...
Click to collapse
well after I dry the phone using the taol, with my mouth I blow some air on the keys..... Now I am using rice and hairdry and almost 90% of the water is gonne, some little white dots are missing....
Hey check if the water damage indicator is still white. I believe it's inside the micro sd card slot and the micro sim slot. If they are still white, go to Sony and tell them that you just wash the phone in tap water for awhile and dried it using a cloth. They should bring in to service it and it should be out pretty soon. Good luck!
Sent from my D6503 using XDA Free mobile app
Plain Water said:
Hey check if the water damage indicator is still white. I believe it's inside the micro sd card slot and the micro sim slot. If they are still white, go to Sony and tell them that you just wash the phone in tap water for awhile and dried it using a cloth. They should bring in to service it and it should be out pretty soon. Good luck!
Sent from my D6503 using XDA Free mobile app
Click to expand...
Click to collapse
yeh, the water damage indicator is still white....
pedramgolchin said:
You used blower and push water around side keys with high pressure air into lcd panel.
I work in mobile service center and dismantle too many xperia Z series, these are water resistance, not water proof
Never use blower again, your phone dry water itself after a few hours
Click to expand...
Click to collapse
but Sony says these are waterproof
I wash my z2 every week, so far no problem
You should nvr use a blower to blow water out as It could actually blow the water deeper into the phone.
Instead use a vacuum cleaner.
Leave your phone in rice for around 3-5 days with all ports open and micro sd card and Sim card taken out. ( that was the amount of time I used when I couldn't turn on my phone at all after dipping into a waterfall ?)
That ought to get all The Water out.
well after about 8 days on trying to fix the phone, I used Hair dryer, rice , etc. there was still some moisture on the screen, like white little dots, so I decided to sell the phone that way.. and now I got a new Z2 black color. now I dont know if I should wash my phone....I am afraid of water now for phones.....
I wash my z2 every time that I go bath
Don't hesitate on this, just when you wash it, don't use blower etc
pedramgolchin said:
I wash my z2 every time that I go bath
Don't hesitate on this, just when you wash it, don't use blower etc
Click to expand...
Click to collapse
can you tell us about the presure sensor the phone have? how it works on your phone?
I recently installed a screen protector that requires dipping in soapy water before applying and that I did.
This device is supposedly IP68 but after I applied the screen protector the phone went crazy!! screen turned off, no touch... after a couple hours screen back on but phone is buggy when it boots, laggy boot logo and touch after 1 full day still isnt responding!! Not to mention I hear camera noise (the one you hear when launching camera app) every time I boot the phone as if its launching camera as well?? WTH is this?? anybody got any suggestions? I placed the phone in a rice bowl and waiting for more hours or days to try it again but anybody faced similar issues? is my device broken because of this??? isnt it supposed to be water proof?!
I wash my phone regularly and don't have any issues. But I don't dip it into soap water, just wash it under stream and soap it outside of water (I also did this with not protected phone without any issue, just need to avoid the external ports).
IP rating is about clean water. Dipping it into soap water can mess the protection since the surface tension is not the same, so where water can't enter a hole of a certain size (for example the speakers grid), soap water could. And since soap are particules into water they can be conductive (water is not that conductive if pure) and mess with electronic if powered.
That is about the theory. Now Sony only make IP68 rated phones because their main market is japan, where people love to use their phone in their bath and that is a real selling point there. So it's weird your got broken by a small amount of soap. Did you try to remove the screen protector? Maybe it is messing with the touch part of the screen.
Hildr said:
I wash my phone regularly and don't have any issues. But I don't dip it into soap water, just wash it under stream and soap it outside of water (I also did this with not protected phone without any issue, just need to avoid the external ports).
IP rating is about clean water. Dipping it into soap water can mess the protection since the surface tension is not the same, so where water can't enter a hole of a certain size (for example the speakers grid), soap water could. And since soap are particules into water they can be conductive (water is not that conductive if pure) and mess with electronic if powered.
That is about the theory. Now Sony only make IP68 rated phones because their main market is japan, where people love to use their phone in their bath and that is a real selling point there. So it's weird your got broken by a small amount of soap. Did you try to remove the screen protector? Maybe it is messing with the touch part of the screen.
Click to expand...
Click to collapse
Baths are generally taken with water only. You shower before getting in the tub so I think you're right about the soap changing the water tension.
3 days ago (8 sept) my Xperia 1 died. I used to wash it regularly in the shower (and a little soap), then that day, a couple of hours after shower, simply turned off. No lights, no charging indicator, no screen, nada. This is really a sad week for me... And sad to say im moving to Samsung
I only could think in blaming the shower.. And if you ask why i washed regularly my phone, is that i work at a hospital er.
wasn't first time i washed it with little soap, practically did it every day, for 5 months. And it's weird my phone suddenly died hours after the shower.
Weird, same problem practically same day. Planned obsolescence??
Hildr said:
I wash my phone regularly and don't have any issues. But I don't dip it into soap water, just wash it under stream and soap it outside of water (I also did this with not protected phone without any issue, just need to avoid the external ports).
IP rating is about clean water. Dipping it into soap water can mess the protection since the surface tension is not the same, so where water can't enter a hole of a certain size (for example the speakers grid), soap water could. And since soap are particules into water they can be conductive (water is not that conductive if pure) and mess with electronic if powered.
That is about the theory. Now Sony only make IP68 rated phones because their main market is japan, where people love to use their phone in their bath and that is a real selling point there. So it's weird your got broken by a small amount of soap. Did you try to remove the screen protector? Maybe it is messing with the touch part of the screen.
Click to expand...
Click to collapse
but its not like I dipped it... the screen protector was dipped and then placed on my device, it wasnt soaking it just left water marks that had to be removed using a tool to stick the protector Id understand if it was dipped in soapy water it could break it but it was just a few drops and it hurts to see the phone got broken...
I dont know this is bad I used to do this on my XZ premium and it worked flawlessly immediately I mean if a phone is water proof and your theory applies on waterproof phones, that means a pool water could break it cuz its full of chlorine or sea water can break it due to salt and other elements...
but I spoke to a lab in my country and they ordered an original screen from Sony officially, but its gonna cost me around 300$...
madshark2009 said:
but its not like I dipped it... the screen protector was dipped and then placed on my device, it wasnt soaking it just left water marks that had to be removed using a tool to stick the protector Id understand if it was dipped in soapy water it could break it but it was just a few drops and it hurts to see the phone got broken...
I dont know this is bad I used to do this on my XZ premium and it worked flawlessly immediately I mean if a phone is water proof and your theory applies on waterproof phones, that means a pool water could break it cuz its full of chlorine or sea water can break it due to salt and other elements...
but I spoke to a lab in my country and they ordered an original screen from Sony officially, but its gonna cost me around 300$...
Click to expand...
Click to collapse
My bad, I understood you dipped the phone, I found that weird but who am I to judge? xD
There is no way some water on the screen that is just glass, or even into the speaker cut could break your phone, even non IP phone will not have problems with that.
Did you try to remove the screen protector? It would be the first thing to do, since it's the only new thing that could mess with the touch screen. And a bad screen protector could easily do that.
If you have already removed the screen protector and the phone is still bugged, then I really don't know what happen. I would try to use the warranty and ask a repair from Sony. In Europe there is a 2 year manufacturer warranty, so any Xperia 1 should still be able to use it. Dunno where you are from and what are the conditions there.
And yes, often it's written in the user manual that waterproofing is just against accidental immersion, and are not meant to go into a pool, and especially not into sea water (salt is the worst thing you will commonly find for electronic and generally any metal that can oxidize).
There were case of advertising showing phone taking photo under sea water, but with warranty void if done, written in the user manual...