Hi, i'm trying to fix this case for few days.
There's Jikantaru XE ROM on my WS - http://forum.xda-developers.com/showthread.php?t=1314430.
Everything works perfectly except GPS.
There is no any icon on notification bar. Of course iGo or Google Navigation is working.
I tried to turn on the GPS with settings=>location=>use GPS.. and with shortcut in notification bar. No response.
I installed GPSFix and after 15min fixing there's no response as well.
Anyone knows what's wrong?
I think updating recovery solved the problem.
Is it possible?
There has been much discussion on the GB ROM about GPS signal going in and out when using Maps. I'm now on ICS (NRG ROM) and it takes about 5 minutes to lock for me, and sometimes when i'm driving the GPS signal will loose the lock and can take some time to get it back.
People have suggested to disable the Filter GPS speed and the sensor filtering settings in GPS status app. What's everyone's thoughts? What's the best configuration?
Hi there,
Is there a way to run iGO Primo in the background with screen off?
I want to be able to lock the screen, put the phone in my pocket and just listen to the vocal instructions. At the moment iGO gets suspended after ~ 1 hour. When I unlock the phone and click the iGO icon in the notifications page, it restarts.
I tried some settings in [power] section of the sys.ini but with no luck. I also tried an app to keep the GPS module alive, nog (although I think iGO should have complained about 'gps sigmal lost').
Any clues, please?
Thank you
Problem solved.
It was the deep sleep mode that was choking iGO after a while.
Not for all...
Not so fast... In devices such 2din "pure" android, when the iGO goes to background (eg. by pressing the home button or at BT phone call), then you'll listen: "GPS signal lost..."
And "bye bye" speedcam alerts...
Any clue?
not bye bye ......
[android]
show_status_bar=1
fullscreen=1
tablet=1
has_physical_home_button=1
create_sdcard_dir=0
upside_down_bug=1
navigation_audio_stream = 4
background_shutdown_timeout=0
background_navigation_enabled=1
I'm used to having my Android phones use apps like KinScreen or Gravity Screen to keep my screen on by motion. On my new Mate 10 (ALP-L29 8.0.0.119 (C636) I'm finding that no matter what I do, the phone's setting for display on time always control, even though I've excepted out both apps from battery optimization and from automatic control of their launch (manually set to run in the background). Anyone experience the same issue or have any thoughts? I don't know if this is an Oreo problem or a Miui one. Thx.
I am having the same issues, no matter what, with persistent notification active, the screen does not stay awake with kinscreen. Installed Wakey, seems to be working at least sometimes... Should be based on your eyes watching the screen...
According to TecTiq, the maker of KinScreen, it's a Miui problem. I'm not the only one to report it. Oh well....
One other possibility is to set your default screen timeout to something long, and then install Proximity Service, which seems to work well on the Mate 10 and turns on and off your screen by covering the proximity sensor. Creates a permanent notification, but installing AutoNotification cures that (as well as the other running notifications, like background Android processes, that you don't want).
EDIT: Nope, belay that! Once the phone sleeps, Proximity Service is still killed (even if excepted from Launch and Battery Optimization). Back to the drawing board....
Can't seem to grab the changelog to paste here but it looks like a good update!
Srem said:
Can't seem to grab the changelog to paste here but it looks like a good update!
Click to expand...
Click to collapse
Yep
Here too
Sent from my TA-1004 using Tapatalk
I could get only so much in my long shot.
I have a screen shot. But unable to share here.
Here's the changelog:
Amazfit OS update log
Version: 2.8.4.0
- Added German Translation
- Added news notification support for Korean and Thai
- Added "Sports Reminder"
a. sports start reminder: automatically recognize the running and walking mode after opening, will remind start of the corresponding sports mode after 5 minutes of exercise, and save the official data before;
b. End of motion reminder: automatically recognizes the end state of running and walking after opening, reminds the end and automatically suspends the movement after 10 minutes of exercise
- Added music playback control function during sports (the watch will display the control screen on the last screen after the music is played)
- Added "3 data big characters" mode for sports interface
- Update GPS firmware for more stable location service
- Update indoor running algorithm
- Update heart rate algorithm to improve the stability of heart rate measurement
- Optimize connection stability for iOS devices
- Optimize emoji emoticons (temporarily does not support non-standard emoji emoticons)
- Optimized motion record, slope distribution data display
- Optimized GPS signal may be missing when the GPS signal is not good
- Optimize possible power consumption in some watches
- Optimize initial altitude data inaccuracy
- Fixed problem with continuation of motion pause and trajectory drawing error
- Repairing abnormal mileage in some areas
- Fixed speed and speed anomaly due to GPS loss
- Fixed partial altitude data showing inconsistencies in watches and apps
- Repair outdoor cycling/skiing/indoor running, automatic suspension, continuous vibration bug
- Fixed some bugs in speed data and improved real-time speed stability
- Bug fixes
My Timeline Widget won't work after the update
Always on display not working anymore.
To bad. How to downgrade?
Error again
2.8.4 update make an error again and again, even factory reset, anyone else to help this problem?
ds1rbi said:
2.8.4 update make an error again and again, even factory reset, anyone else to help this problem?
Click to expand...
Click to collapse
I got an answer I think
https://forum.xda-developers.com/smartwatch/amazfit/fw-tool-stock-firmware-installers-2017-t3725494
Melhiat said:
Always on display not working anymore.
To bad. How to downgrade?
Click to expand...
Click to collapse
Huh? Pace always have AlwaysOnDisplay, what are you taking about? If you get a black screen while screen is locked and you are using a custom APK watchface then you need to uninstall the current version, restart the device and seek for a new version that also works with Stratos firmware 2.3.7.0+, older APKs don't work anymore....
Calories are now much more accurate on my cycle
lfom said:
Huh? Pace always have AlwaysOnDisplay, what are you taking about? If you get a black screen while screen is locked and you are using a custom APK watchface then you need to uninstall the current version, restart the device and seek for a new version that also works with Stratos firmware 2.2.7.0+, older APKs don't work anymore....
Click to expand...
Click to collapse
Noticed that afterwards. Thanks for info anyway.
kedlub said:
Here's the changelog:
Amazfit OS update log
Version: 2.8.4.0
- Added "Sports Reminder"
a. sports start reminder: automatically recognize the running and walking mode after opening, will remind start of the corresponding sports mode after 5 minutes of exercise, and save the official data before;
b. End of motion reminder: automatically recognizes the end state of running and walking after opening, reminds the end and automatically suspends the movement after 10 minutes of exercise
Click to expand...
Click to collapse
I think some of them exists in older roms already. ?
How do you disable the sport autostart ? Every time, as I am returning from walking the dog, I get a message saying I have started a walk - about 30 mins after it started
From some other thread:
lfom said:
Latest firmwares for all watches (Pace/Stratos/Verge) introduced "Activity reminders" (also called Sports reminders on Verge) that are supposed to auto-start and auto-stop recording activities, but they have a bug (besides the fact that I don't think they actually work as of now): even if both are disabled by default you must enable and then disable both options in watch Settings -> General or your activity most probably will miss the first initial and final minutes of GPS data. Simply enable both, quit settings then go back and disable them again and it should be fine.
Click to expand...
Click to collapse
Finally, Thai language support, but it renders text incorrectly in standby screen as it doesn't render upper and lower character, for example, words like "หู้" will be rendered as "ห" in standby screen, but it will be rendered correctly in active screen. Also, its Thai font is too wide.
Do you think that this update is useful?
gps not working
gps is not working after the update for me, did a factory reset but still not working
Apk watchfaces not working correctly with this new rom.
When the watch goes to sleep after x second timeout the screen either goes black or out showes previous wfz watch face or showes correct apk watchface but very grainy.
Srem said:
Calories are now much more accurate on my cycle
Click to expand...
Click to collapse
Same with my elliptic. Went from around 100-130 for an intensive 30-min session to around 420-440, about the same as what the machine actually gives.
yaronkle said:
Apk watchfaces not working correctly with this new rom.
When the watch goes to sleep after x second timeout the screen either goes black or out showes previous wfz watch face or showes correct apk watchface but very grainy.
Click to expand...
Click to collapse
Old APK watchfaces should be updated to work with newer firmware (for both Pace and Stratos), check if the developer released a new version.