I've got an evo 3d with a tpu case and am looking for a dock that it would fit in so I can dock it while I'm at work.
Any advice would be appreciated, thanks.
Already a few threads on this. With that said I have the exomount universal mount and its great 20$ on Amazon and it sticks really well the grip is strong and sized well enough I can miss both the volume and camera buttons I've used it with no case ballistic soft gel and the platinum cases all with no problem.
Sent from my PG86100 using xda premium
celthunder said:
Already a few threads on this. With that said I have the exomount universal mount and its great 20$ on Amazon and it sticks really well the grip is strong and sized well enough I can miss both the volume and camera buttons I've used it with no case ballistic soft gel and the platinum cases all with no problem.
Sent from my PG86100 using xda premium
Click to expand...
Click to collapse
So you use a car mount at work? It sticks to your desk pretty good? The desks in my office would not allow a suction cup to stick. I'm about ready to make my own to work with a tpu.
I have the Ebay dock with a spot in the back for an extra better. Queue great with many thin cases. Tpu, Otterbox commuter, Seidio Surface, Otterbox Impact, etc. I have 0 complaints and I've had it since just after the Evo 3D launch
Sent from my PG86100 using xda premium
igrip works with tpu and hard case. i have it and its awesome.
I'm using a spider podium at work. I wanted a dock that I could use in portrait mode - and the spider podium works great once I got it shaped the right way. It's sturdy enough that I can use my phone and swipe as usual.
I'm surprised no one's made a dock that could be used in both portrait and landscape mode. It would just need L-shaped material - with the phone dropped in in landscape, then rotated as needed. It would seem an easy enough feature to add.
Kidigi makes one, http://www.4u-mobi.com/onlineshop/online_shop_detail.php?pid=5756
Related
The TPU cases look pretty great, I may end up going with one of them. But the camera portion is raised up so the phone still won't lay flat.
Any suggestions for a slim (the slimmer the better) case that just has a cutout for the camera?
Well the phone itself doesn't lie very flat. Any thin case that doesn't cover the camera should lie flat but personally I really want the camera covered so i got the tpu hybrid (white) from eBay and really enjoy it. Good luck finding the right one! Thankfully cases are so cheap nowadays that $15 will get you several cases.
besides TPU, i really enjoy Casemate's ToughCase.
REally nice design and not any thicker than the TPU
I like my Otter Box commuter and it lays flat.
Sent from my PG86100 using XDA Premium App
The Seidio Surface(aka The Platinum case at Best Buy) will make it lay flat, but as mentioned above, it doesn't cover the camera area.
If you look around, it seems like any case that DOESN'T cover the camera area will make the phone lay flat as the way those cases protect the camrea area is make their case thick enough so the camera area is slightly recessed.
bcoutlander said:
I like my Otter Box commuter and it lays flat.
Sent from my PG86100 using XDA Premium App
Click to expand...
Click to collapse
Just got mine yesterday, love it. Not as bulky as the one on my Hero.
I had a spare Garmin GPS mount laying around so i decided to use it since the dimension are very close to the 3D. I have a case-mate barely there so i had a slight gap(I'm not sure about otter-box case but the thicker the better fit). I bent the gps mount slighly invard until the gap was closed and padded it with rubber bands so there is no slipping and now it fits perfectly and very firm. As an added bonus both the cameras are exposed.
That's actually pretty slick man!! Well done, and looks better than a lot of car docks I've seen on eBay
Sent from my PG86100 using XDA Premium App
Works even better when you have the side tabs from the otterbox defender see my previous post.
http://forum.xda-developers.com/showthread.php?t=1160654&highlight=otterbox+car+dock&page=2
As the title says, I have the [iGrip car mount](http://www.htcdepot.com/igrip-perfektfit-charging-dock/3A78A8613.htm) and it has been my experience trying out phone protectors at the Sprint store that none of the cases fit into it.
Are there any nice cases that will fit in the car mount?
P.s. I know that the insert pulls out.
the two piece snap together cases fit, the bodyglove cases are slightely too big and they wont stay in the charge position.
the igrip car dock dash mount sucks it wobbles too much and doesn't have an adjustment knob at the neck like the pictures show.
I have had good luck with the hard plastic cases as well as the TPU cases. I even got my OB commuter to work with some mods.
Sent from my 3D EVOlution
I just got mine in today and I have the tpu hybrid case. can't get it to fit! I feel screwed by buying this. I would hate to have to take my case off each time to use the igrip
Edit: nm I removed a piece that allowed my case to fit
I have the igrip car dock and use a tpu-cases.com case and it fits perfectly. IMO, the tpu-cases brand fit great with fast free shipping. The tpu hybrid that you have is not the same as the tpu-cases. Hope this helps.
HiredGUN.45 said:
I have the igrip car dock and use a tpu-cases.com case and it fits perfectly. IMO, the tpu-cases brand fit great with fast free shipping. The tpu hybrid that you have is not the same as the tpu-cases. Hope this helps.
Click to expand...
Click to collapse
It actually fits with the tpu hybrid! just had to remove a plastic piece.
HiredGUN.45 said:
I have the igrip car dock and use a tpu-cases.com case and it fits perfectly. IMO, the tpu-cases brand fit great with fast free shipping. The tpu hybrid that you have is not the same as the tpu-cases. Hope this helps.
Click to expand...
Click to collapse
Love the tpu-cases. And they fit perfectly after removing the igrip insert. Love the combo!
The Body Glove Vibe kickstand case works perfectly with the iGrip. Great combo. I have gotten over the purple color. Chicks seem to dig it.
Works great with all 6 of my tpu cases
Sent from my PG86100 using XDA Premium App
Craysh said:
As the title says, I have the [iGrip car mount](http://www.htcdepot.com/igrip-perfektfit-charging-dock/3A78A8613.htm) and it has been my experience trying out phone protectors at the Sprint store that none of the cases fit into it.
Are there any nice cases that will fit in the car mount?
P.s. I know that the insert pulls out.
Click to expand...
Click to collapse
All of our cases at http://tpu-cases.com work with the iGrip car dock. You can also use coupon code XDA for a 10% discount
Craysh said:
As the title says, I have the [iGrip car mount](http://www.htcdepot.com/igrip-perfektfit-charging-dock/3A78A8613.htm) and it has been my experience trying out phone protectors at the Sprint store that none of the cases fit into it.
Are there any nice cases that will fit in the car mount?
P.s. I know that the insert pulls out.
Click to expand...
Click to collapse
The fit is incredible on the Platinum or Seidio case with the kickstand. I can confirm that this combo will be what I stay with on this phone for sure.
I had the iGrip PerfectFit charging dock. I tried to fit it with my Seidio Surface case with no avail, neither fits not close to touch the microUSB attachment. It's going back to the online store for a refund. Bummer.
I guess I have to wait for Seidio to come out an equivalent car mount as for the EVO 4G with Surface case. That mount from Germany is sick!
Barely There fits great.
Sent from my PG86100 using Tapatalk
I think a lot of people don't realize there's an insert in the igrip dock that you can take out if you have a case on your phone. It won't fit something as monstrous as an otterbox, but my tpu hybrid case fits perfectly
Sent from my PG86100 using XDA App
andrusk said:
I think a lot of people don't realize there's an insert in the igrip dock that you can take out if you have a case on your phone. It won't fit something as monstrous as an otterbox, but my tpu hybrid case fits perfectly
Sent from my PG86100 using XDA App
Click to expand...
Click to collapse
Yup, I tried all the cases my Sprint store had and it didn't fit despite removing the insert.
Thanks everyone for their help
Can someone confirm the Seidio Surface case does work with the iGrip? I think I saw both a yes and a no in this thread.
Is the Platinum case at BestBuy just a rebranded Seidio Surface? Looks like it.
TIA!
Does anyone know of a case that fits both the nav dock and desktop dock without the need to remove the case? I see the docks come with an adaptor plate that is used with cases, but which cases work? Want a good case that doesn't add too much bulk to carry in pocket and maybe on belt but also goes in docks.
Thanks
You would need either a thin, silicone case, one of the invisible shield-type skins, or a case that doesn't have anything near the ports on top of the phone.
I tried the Otterbox commuter case (the thinner of the two) with an HD station in the Verizon store here. Removing the insert on the dock allowed the ports to line up properly, but the male connectors were not long enough to make proper contact. Removing the plastic, outer case may have helped here, but not by much.
Have you tested it with one of the silicone cases?
I have both the Mobi hard shell and the Otterbox commuter cases. The otterbox fit really snug in the travel dock and charges fine. The 2piece mobi hard shell case fits the travel dock a little loose but works fine also.
My friend has the otterbox commuter case working with the home dock. He said he had to remove a very little amount of plastic from the dock with a hand file.
I have the incipio two-piece case (hard/soft shell combo) that fits very well.
Sent from my GT-P7510 using xda premium
The Verizon high gloss silicone case fits both.
Sent from my DROID RAZR using Tapatalk
I ended up getting a Qmadix case that works perfectly. No issues and light weight.
Sent from my DROID RAZR using XDA App
BigJArm said:
I ended up getting a Qmadix case that works perfectly. No issues and light weight.
Sent from my DROID RAZR using XDA App
Click to expand...
Click to collapse
Can you please upload some shots from your case?
Beeble said:
Thanx, i needed the same thing and forgot all about the password!
Just set to 0 mins and it will only lock on boot or when coming out of standby
/me is happy now![/
Sent from my DROID RAZR using Tapatalk
Click to expand...
Click to collapse
balla48801 said:
I have both the Mobi hard shell and the Otterbox commuter cases. The otterbox fit really snug in the travel dock and charges fine. The 2piece mobi hard shell case fits the travel dock a little loose but works fine also.
My friend has the otterbox commuter case working with the home dock. He said he had to remove a very little amount of plastic from the dock with a hand file.
Click to expand...
Click to collapse
I can confirm both of these about the commuter series otterbox. Fits really nicely in the travel dock with the insert removed. I thought the otterbox was made for it it fit so well.
The home dock on the other hand is another matter. I think ill try what your friend has done as it seems the hard plastic piece seems to be the troubling piece. Ill let you all know what i find. Hopefully posting some pics later on this week.
I have the Boxwave Duo Suit they are also known as the Cimo-S case (they appear to be identical). These fit but you need to remove the insert from the dock.
http://www.amazon.com/s/ref=nb_sb_noss?url=search-alias=aps&field-keywords=cimo-s+razr&x=0&y=0
http://www.amazon.com/s/ref=nb_sb_n...s&field-keywords=Boxwave+duosuit+razr&x=0&y=0
The belt clip combo case that Verizon sales fits in the Navigation dock. At first I thought that it wouldn't work because it was too snug of a fit, but a few days later I realized that there was an insert that I needed to remove from the dock. After a little pry work, the insert popped out and it fits securely enough.
Sent from my DROID RAZR using Tapatalk
try ebay 150705998786
that most thin case i can found
Got one black and one clear quality is very good and the price too!
http://www.ebay.ca/itm/260919589412?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
I just bought the Mobo Carrera slim Horizontal case (for the Galaxy Nexus) and I have to say that I'm very happy with it. It fits the LTEvo nice and snug. The phone doesn't budge at all, especially when shaken vigorously. Also magnet doesn't come off when turned upside and shaken hard. The case is nice and slim to complement the slimness of the LTEvo. The interior is outlined in red leather (sort of complements the phone as well). The belt clip is made of metal (but covered in leather) and swivels but the swivel is rigid and doesn't move with little force with is good to me; stays in the position it is set to. Has the opening at the bottom to allow you to push the phone up to easily remove it.
If you are interested in a horizontal case, then this might be the one for you. Just google Mobo Carrera Horizontal case Galaxy Nexus; amazon has it here Mobo Carrera Horizontal Carrying Case. Other site sell it as well.
I bought 2 more slim cases and I'll write about them here as well when they come in this coming week.
I am looking into a belt case.... Waiting for your review
DarkManX4lf said:
I am looking into a belt case.... Waiting for your review
Click to expand...
Click to collapse
Well I didn't keep the other two cases. One was too big for the LTEvo that the phone flopped around in the case. That was a killer for me, so I didn't even bother to give it another thought.
The other one is the one pictured below. It was a case for the Galaxy Nexus so it didn't really fit all that well. Don't get me wrong the case was well designed but the dimensions were just short of fitting the LTEvo. The LTEvo was hanging out of the case. If they make one specifically for the LTEvo, it would be worth investing in it.
unknown_owner said:
Well I didn't keep the other two cases. One was too big for the LTEvo that the phone flopped around in the case. That was a killer for me, so I didn't even bother to give it another thought.
The other one is the one pictured below. It was a case for the Galaxy Nexus so it didn't really fit all that well. Don't get me wrong the case was well designed but the dimensions were just short of fitting the LTEvo. The LTEvo was hanging out of the case. If they make one specifically for the LTEvo, it would be worth investing in it.
Click to expand...
Click to collapse
If you don't mind my asking, what cases were the ones that were too big? Also do you think they'd fit the Evo with a silicone or TPU case on? Thanks!
Ditto to the above I like a gorm fitting holster but I never go out without a case. For work I use the Otterbox commuter with the seido active holster but for regular use, I use a thin TPU case. I have yet to find a holster that is thin and long enough to fit the phone with a TPU case.
Any suggestions?
Sent from my EVO using Tapatalk 2
wonton2049 said:
Ditto to the above I like a gorm fitting holster but I never go out without a case. For work I use the Otterbox commuter with the seido active holster but for regular use, I use a thin TPU case. I have yet to find a holster that is thin and long enough to fit the phone with a TPU case.
Any suggestions?
Sent from my EVO using Tapatalk 2
Click to expand...
Click to collapse
I'm still on the hunt too.
I picked one up from Walmart, its been holding up well and fits great with my tpu
crucial929 said:
I picked one up from Walmart, its been holding up well and fits great with my tpu
Click to expand...
Click to collapse
Do you know the brand? I went to Walmart and they had nothing that fit.
DarkManX4lf said:
Do you know the brand? I went to Walmart and they had nothing that fit.
Click to expand...
Click to collapse
It's made by case logic
wonton2049 said:
Ditto to the above I like a gorm fitting holster but I never go out without a case. For work I use the Otterbox commuter with the seido active holster but for regular use, I use a thin TPU case. I have yet to find a holster that is thin and long enough to fit the phone with a TPU case.
Any suggestions?
Sent from my EVO using Tapatalk 2
Click to expand...
Click to collapse
DarkManX4lf said:
I'm still on the hunt too.
Click to expand...
Click to collapse
The seidio surface holster fits the tpu covered evo like a glove. This is what i use.
Sent from my EVO using xda app-developers app
I bought my dad a side clip holster from siedioonline and he was ecstatic with it.
Even I loved it, and I really dislike holsters in general.