Related
everything worked great till the part where i go into the superoneclick and press root, and then get this error:
SuperOneClick v1.9.5.0
Checking drivers...
Killing ADB Server...
OK
Starting ADB Server...
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
OK
Waiting for device...
OK
Getting OS Version...
Pushing psneuter...
error: device not found
FAILED
A try again with debugging mode turned on .
Are you using the extinct CF Root thread ???no longer used ???
http://forum.xda-developers.com/showthread.php?t=1056334&highlight=CF+ROOT
THIS THREAD HAS BEEN SUPERCEDED BY THE CF-ROOT THREAD: http://forum.xda-developers.com/show....php?t=1103399
jje
debugging mode is on.
http://forum.xda-developers.com/show...hlight=CF+ROOT i am using this, it isn't working anymore?
http://forum.xda-developers.com/show....php?t=1103399 this works?
btw ur second link(http://forum.xda-developers.com/show....php?t=1103399) won't work
help please :S
wow really nobody can help me?
amfly said:
wow really nobody can help me?
Click to expand...
Click to collapse
Follow instructions in ChainFire's post to root the SGS2. http://forum.xda-developers.com/showthread.php?t=1103399. I bought my phone last night and rooted it immediately.
ok, i will now try the other guide, but I have one problem:
I have procceeded these stages:
- Download the attached ODIN file and extract the .zip file
- Download the attached XWKDD, but do NOT extract the .tar file
- Download and extract SuperOneClick (Some say you should not be using the very latest version 1.9, but 1.5 or so)
- If you do not have Samsung's KIES 2.0 installed, download and install it. You need it to install the correct USB drivers, so the programs can communicate with the device. Reboot your computer after installation of KIES.
- Make sure your device is in USB debugging mode: Settings -> Applications -> Development -> USB debugging
- Reboot your device into download mode: Turn the device off, then power it on again by pressing and holding VolumeDown + Home + Power simultaneously. You will know when you are in download mode, it is really obvious
- Start ODIN
- Connect the device to your computer using USB
- Wait a few seconds, the ODIN screen should show you that a device is now connected
- Make sure that in ODIN NOTHING is checked, except the "Auto reboot" and "F. Reset Time" checkboxes. Press the "PDA" button, and select the "XWKDD_insecure.tar" file.
- Press "Start". ODIN you should now be flashing the kernel, and the device should reboot.
how can i reset them?
how can i reset them?
Guessing at what them are reboot your computer and phone .
jje
This is the easiest way to root the device?
Endoran said:
This is the easiest way to root the device?
Click to expand...
Click to collapse
Bump. I'd really like to root without having to install a new kernel...is this possible? Thanks!
1
JJEgan said:
how can i reset them?
Guessing at what them are reboot your computer and phone .
jje
Click to expand...
Click to collapse
no, rebooting the decide won't reset all those steps... i think...
any other suggestions?
help please
Cmon someone
amfly said:
everything worked great till the part where i go into the superoneclick and press root, and then get this error:
SuperOneClick v1.9.5.0
Checking drivers...
Killing ADB Server...
OK
Starting ADB Server...
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
OK
Waiting for device...
OK
Getting OS Version...
Pushing psneuter...
error: device not found
FAILED
Click to expand...
Click to collapse
Not sure if this helps... But Ive got very same log from Superoneclick after flashing CF root XWKF3 over XWKDD_insecure kernel. I already had root in KDD, maybe thats why.
Sent from my GT-I9100 using Tapatalk
u haven't what i recently asked. anyone else? please?
Once more then .
Flash stock firmware via Odin i suggest KF2 .
Once phone has booted up follow instructions as posted Chainfires CWM and root .
http://forum.xda-developers.com/showthread.php?t=1103399
Suggest KF2 root via Odin method works out of the box for millions .
jje
Please help! After flashing a new rom (Nexus_Prime_360_Vr-1_3-1),my PC (windows 7 64 bit), Odin and Heimdall doesn't recognize my Vibrant, after that i accidentally formatted boot in CWM. Now i can only acces to download mode and PC doesnt recognize my phone in anyway, i installed drivers correctly . When i power on the phone, nothing shows because the vibrant screen,pleaaaaaaaaaaaaaase help to fix my Vibrant!!!!!!!!!!!!!
vnh001 said:
Please help! After flashing a new rom (Nexus_Prime_360_Vr-1_3-1),my PC (windows 7 64 bit), Odin and Heimdall doesn't recognize my Vibrant, after that i accidentally formatted boot in CWM. Now i can only acces to download mode and PC doesnt recognize my phone in anyway, i installed drivers correctly . When i power on the phone, nothing shows because the vibrant screen,pleaaaaaaaaaaaaaase help to fix my Vibrant!!!!!!!!!!!!!
Click to expand...
Click to collapse
try this
http://forum.xda-developers.com/showthread.php?t=848737
---------- Post added at 02:27 PM ---------- Previous post was at 02:16 PM ----------
Mostdef said:
try this
http://forum.xda-developers.com/showthread.php?t=848737
Click to expand...
Click to collapse
there many way to unbrick your phone
here what i found
Try this, it is slightly different from what the guy earlier said..
1.) Take off your back cover, remove your sim & mirco sd card.
2.) Remove your battery.
Make sure you have Odin OPEN with admin privileges!
Make sure you have the USB plugged into your PC but NOT your phone!
3.) Hold the volume buttons.
4.) Put the battery in.
5.) Put the USB in.
Continue holding the volume keys & you should pop into DOWNLOAD mode within a few seconds
or
1. remove battery, sim and sd
2. Open Odin
3. Connect usb to phone
4. Hold down both volume keys and power
5. but battery back in
6. once the screen blinks, let go of the power button
7. keep holding both volume keys until the downloading screen starts
8. Flash back to stock. I always go back to stock after something like this just to make sure that nothing got corrupted. Also check the re-partition option.
---------- Post added at 02:41 PM ---------- Previous post was at 02:27 PM ----------
OOP wrong thread
i've tried all but pc and odin still dont recognize my phone
Another suggestion is to try the Jig
And if that is not working then your only option is Jtag
go to www.mobiletechvideos.com and he sells professional JIGs for $8 and he can also fix complete bricks for $40. I ordered my JIG yesterday but I'm expecting that I will have to have him do the Jtag on it because my phone just DIED badly yesterday. Nothing has worked. We'll see what happens.
---------- Post added at 12:54 PM ---------- Previous post was at 12:52 PM ----------
vnh001 said:
i've tried all but pc and odin still dont recognize my phone
Click to expand...
Click to collapse
does it even turn on?
Another suggestion is to try the Jig And if that is not working then your only opti
if i try the Jig, my pc will recognize phone or not?
vnh001 said:
if i try the Jig, my pc will recognize phone or not?
Click to expand...
Click to collapse
The Jig is to get it into Download mode. As you had stated earlier you can do this without issue.
I am guessing you are just missing the "Nexus S" drivers on your machine. I had to install them before it would recognize my phone when I first went to ICS.
You should find a link for the "Nexus S" drivers in the Development section. ICS does not want the Galaxy S drivers.
usb driver
http://forum.xda-developers.com/showthread.php?t=1459304&highlight=nexus+s+driver
Sorry this is the wrong driver, You gave him the HOST mode driver.
You will need the drivers listed here http://androiddrivers.net/samsung-android-drivers/download-nexus-s-drivers/
thank you for help but my phone after installing nexus s drivers still can not be recognized by pc and odin((((
vnh001 said:
thank you for help but my phone after installing nexus s drivers still can not be recognized by pc and odin((((
Click to expand...
Click to collapse
Hi,
did you try installing google's SDK? try installing Java SDK x64 http://www.oracle.com/technetwork/java/javase/downloads/index.html
then install http://developer.android.com/sdk/index.html
when installing Android SDK in the "extra" section check the usb drivers.
after it downloads you can try changing the drivers in the device manager of windows and use the drivers found here.
C:\Program Files (x86)\Android\android-sdk\extras\google\usb_driver
well thats what i did after odin didnt recognize my phone. but my phone wasnt bricked. hope it helps.
thank you for triying help to me!!!!!! I also installed ANDROID SDK bu noyhing help me to fix that problem and PC stil recognized my phone as an {unknown device} ((((((((
Edit: nvm i see that you can access download mode.
It is definitely a driver issue, try a different usb port or even a different computer.
thank's but i've already tried that in 4 different PCs but nothing helped me there are shown only unknown device
Please anybody Help to fix my vibrant!!!!
vnh001 said:
Please anybody Help to fix my vibrant!!!!
Click to expand...
Click to collapse
Try a new USB cable.
I can tell you from experience that I thought I was completely bricked...I went out and bought a brand new phone! BUT, when I got home from the store, I kept trying, and I finally got everything working.
I know it's been said, but really make sure you have the correct drivers on your computer! That's the thing that saved me. I didn't have them at first, and I finally found them...do you have a friend whose computer you can try?
I had the same issue with my phone a while back.. I called Samsung, told them it just stopped working, and somehow i managed to still be under warranty. I sent it to them, and they say they replaced some parts or something, and sent it back working like new.
However, i would suggest trying the JIG. Ive heard it works, just forces your phone into download mode, and ODIN at that point should recognize it. GL
(Might want to try cleaning your computer, the registry files, and rebooting. Cant tell you how often thats helped solve issues for me.)
Thanks all for help but my phone didnt fixedhttp://media.xda-developers.com/images/smilies/frown.gif
How I fix those bricks....
1. Download AI0 Vibrant Tool Box here...
http://www.google.dm/url?sa=t&rct=j...uJ2iBA&usg=AFQjCNHHTDPoSZz-8jqhAHy7S2lsO5Vq4g
2. Run the toolbox.exe file.
3. From menu do "Install Drivers" just to be sure & follow screen directions.
3. Remove the phone battery.
4. From AI0 Menu select "Flash to Stock"
5. From Menu select Reboot into download & Start ODIN
6. Connect your USB cable to phone.
7. Hold down both UP/Down Volume buttoms AND Power button.
8. While doing that Install your battery.
9. See if Odin will recognize the phone by highlighting the ID:COM to yellow.
10. If so then load the PIT & PDA files & flash back to stock Eclair 2.1
Thank you,but AIO Vibrant Toolbox 2.5 doesnt help me to fix my vibrant,there are still uknown device((((((((((((
My computer won't recognize my gs4. I have the latest drivers installed and have re-installed many times. The only thing it does when I plug it in is charge. It sometimes says windows is searching for the latest driver when I plug it in, but it then it then says it was unplugged. ODIN did manage recognize it once and that was enough for me too root it and then flash the stock kernel back on. My phone then soft-bricked at the padlock after some rom flashing and I had to go to my friends house to flash it back to stock. Is there anything else I can do?
Am I the only one with this problem?
Does it give you the error "USB device not recognized"? If so there are some fixes for it. I fixed my friends when I sold him my S3. His PC did it.
Yes, a couple of times it did that. Now it just does nothing.
If you try and remove the device from your device manager does it do anything?
Right click on computer and go to properties to get to the device manager.
What would it be named? I looked through all the usb stuff and everything else and couldn't find anything that would be my device.
d03p3yy said:
What would it be named? I looked through all the usb stuff and everything else and couldn't find anything that would be my device.
Click to expand...
Click to collapse
It would be any device with a yellow Triangle and an Exclamation point on it. Also uninstall KIES and your Samsung USB drivers, then reboot. Get updated USB drivers from the S4 link in my signature.
It did the same thing and game me the unknown device thing. It also said that the device malfunctioned. I guess ill just try again.
d03p3yy said:
It did the same thing and game me the unknown device thing. It also said that the device malfunctioned. I guess ill just try again.
Click to expand...
Click to collapse
Ok let's try this fix first.
1. Remove phone from PC and shutdown and remove battery to shut off phone.
2. Plug USB cable into PC and phone.
3. Put battery back in and boot phone but…
4. As the phone boots, hold down Volume up and down and don't let go until you see you are in safe mode on the phone. It should say safe mode on the front screen.
5. This should reboot your phone into download mode and install drivers that are needed.
6. Your PC will indicate and recognize the phone.
7. Now if you check the notification drop down on your phone you should see USB/MTP options there in the notification area. MTP should be checked.
Still no luck. Maybe later I will re-install windows or just re install every driver on my computer.
The other fix to try is listed below.
1. Uninstall any previous instance of Kies/USB driver
2. Download the latest Kies, specific to your S3.
3. Download Samsung USB drivers 1.4.6.0 (I've tried newer versions but they all failed)
4. REBOOT
5. Disconnect from internet (VERY IMPORTANT!!! - forcing Windows to install local drivers ONLY)
6. With the phone disconnected, install Kies + USB drivers downloaded in steps 2,3
7. Connect the phone and let Windows install the drivers.
8. Reestablish the internet connection.
---------- Post added at 08:33 PM ---------- Previous post was at 08:31 PM ----------
If that doesn't work PM my your system specs IE RAM, CPU, and HDD Space and current OS.
The computer doesn't do anything when I plug the phone in. The only thing that starts to happen is that the phone starts charging.
d03p3yy said:
The computer doesn't do anything when I plug the phone in. The only thing that starts to happen is that the phone starts charging.
Click to expand...
Click to collapse
Send me the PM with the requested info.
I'm not really requesting anymore info. I am just going to re install windows because I have done so much stuff to this install that it is time for a new one.
Bump
Any luck? My computer won't recognize my phone either anymore.
PeterifficX said:
Bump
Any luck? My computer won't recognize my phone either anymore.
Click to expand...
Click to collapse
have you done the simpliest thing like reboot your computer?
PeterifficX said:
Bump
Any luck? My computer won't recognize my phone either anymore.
Click to expand...
Click to collapse
My experience with the "Device Malfunctioned" thing was due to a bad cable. It would charge, but wouldn't allow me to connect.
You might also try a different USB port on your computer. Often times the connectors on the back of a desktop system, which are hardwired to the motherboard, work more reliably than the front ones.
I've installed rootkitXperia_20140719 on my windows 7 laptop. USB debugging is set. Unknown sources is set. I've run the ADB-setup-1.3 with the blue cmd screen several times. I've downloaded and extracted Xperia Z2 Device Driver. On the Command screen I run the "install.bat" and I get "waiting for device... What else am I missing? Please help. Thank you
Swarai said:
I've installed rootkitXperia_20140719 on my windows 7 laptop. USB debugging is set. Unknown sources is set. I've run the ADB-setup-1.3 with the blue cmd screen several times. I've downloaded and extracted Xperia Z2 Device Driver. On the Command screen I run the "install.bat" and I get "waiting for device... What else am I missing? Please help. Thank you
Click to expand...
Click to collapse
Maybe "run as administrator". Wild call
Thanks but that didn't work either
HugePotato said:
Maybe "run as administrator". Wild call
Click to expand...
Click to collapse
I rooted my .314 with Easy Root Tool. Try this http://forum.xda-developers.com/showthread.php?t=2784900.
Sometimes it works on a second run. And backup TA too with the tool if you haven't already, that is very important.
My Adb is set because when i prompt it from a version it responds. The computer can "see" my Z2 because when the USB is plugged in it shows a pop up window for options. The problem is when I prompt it >adb devices it does not see the z2. When i launch the root kit it shows "waiting for device" what can I do now?
Swarai said:
My Adb is set because when i prompt it from a version it responds. The computer can "see" my Z2 because when the USB is plugged in it shows a pop up window for options. The problem is when I prompt it >adb devices it does not see the z2. When i launch the root kit it shows "waiting for device" what can I do now?
Click to expand...
Click to collapse
when you plug device in does it show a screen on phonethat you have to select ok press ok if not unplug phone and plug it back in
@Swarai Sorry m8 I didn't know that you were using rootkit Xperia. I used http://forum.xda-developers.com/showthread.php?t=2784900 like @HugePotato it was the version that worked for me. What I did was extract everything to my desktop and put it all in the same folder then download tr.apk and put it inside the files folder then run install.bat as administrator. A couple of things I noticed were that restarting your phone before connecting ( so you get the trust this computer adb message) and not letting your phone go to sleep helped. If you have any more Q's just let me know. It may take a couple of runs but, it will work. Good luck m8:good:
It does show on the phone screen, but still nothing from the computer
ron31 said:
when you plug device in does it show a screen on phonethat you have to select ok press ok if not unplug phone and plug it back in
Click to expand...
Click to collapse
Swarai said:
It does show on the phone screen, but still nothing from the computer
Click to expand...
Click to collapse
did you push any key on computer post ascreen shot of computer sreen
Okay so now I get " * daemon not running.starting it now on port 5037 * " " * daemon started successfully * " waiting for device, connect USB cable now... I connect the phone then nothing happens
stress40 said:
@Swarai Sorry m8 I didn't know that you were using rootkit Xperia. I used http://forum.xda-developers.com/showthread.php?t=2784900 like @HugePotato it was the version that worked for me. What I did was extract everything to my desktop and put it all in the same folder then download tr.apk and put it inside the files folder then run install.bat as administrator. A couple of things I noticed were that restarting your phone before connecting ( so you get the trust this computer adb message) and not letting your phone go to sleep helped. If you have any more Q's just let me know. It may take a couple of runs but, it will work. Good luck m8:good:
Click to expand...
Click to collapse
What happens if you try >adb devices just a thought but you do have USB debugging enabled on the phone?
Try This
First Reset Your Phone From Settings>Backup And Restore>Factory Reset Then Download This Link ( http://doomlord.xperia-files.com/download.php?dlid=YWRiX2Zhc3Rib290) And Extract The zip In A Folder Then Put The Root Install.bat Inside The folder You Extract The Link In Then Plug The Phone With Debugging On And Start The Install.Bat (SomeTime Adb And Fast Boot Dont Work Properley Mine Did The Same And I Did This And It Worked For Me So Good Luck Buddy)
My Adb is set because when i prompt it from a version it responds. The computer can "see" my Z2 because when the USB is plugged in it shows a pop up window for options. The problem is when I prompt it >adb devices it does not see the z2. When i launch the root kit it shows "waiting for device" what can I do now?
ghostofcain said:
What happens if you try >adb devices just a thought but you do have USB debugging enabled on the phone?
Click to expand...
Click to collapse
If your not getting a response to >adb devices, the pc isn't seeing it in adb mode. First things is I'd remove all the Sony drivers from Windows and try reinstalling them, ensure that you've got the upto date adb in the android-tools folder and let us know how you get on.
---------- Post added at 11:47 AM ---------- Previous post was at 11:43 AM ----------
Swarai said:
My Adb is set because when i prompt it from a version it responds. The computer can "see" my Z2 because when the USB is plugged in it shows a pop up window for options. The problem is when I prompt it >adb devices it does not see the z2. When i launch the root kit it shows "waiting for device" what can I do now?
Click to expand...
Click to collapse
USB debugging is definitely enabled on phone?
Debugging is always on. Is there an adb more up to date than what has been posted?
ghostofcain said:
If your not getting a response to >adb devices, the pc isn't seeing it in adb mode. First things is I'd remove all the Sony drivers from Windows and try reinstalling them, ensure that you've got the upto date adb in the android-tools folder and let us know how you get on.
---------- Post added at 11:47 AM ---------- Previous post was at 11:43 AM ----------
USB debugging is definitely enabled on phone?
Click to expand...
Click to collapse
I'm going to wait until everything else fails before I do this. Why? Because if I do this and it still doesn't work, I'm going to be very upset that I went through all this for nothing.
bassil_zein said:
First Reset Your Phone From Settings>Backup And Restore>Factory Reset Then Download This Link ( http://doomlord.xperia-files.com/download.php?dlid=YWRiX2Zhc3Rib290) And Extract The zip In A Folder Then Put The Root Install.bat Inside The folder You Extract The Link In Then Plug The Phone With Debugging On And Start The Install.Bat (SomeTime Adb And Fast Boot Dont Work Properley Mine Did The Same And I Did This And It Worked For Me So Good Luck Buddy)
Click to expand...
Click to collapse
Personally don't think that'll help, the problem you are experiencing is your pc not recognising your device in adb mode, try using a different USB cable and a different USB socket on your pc.
You can check that adb is up to date in the android SDK console.
Do It
Swarai said:
I'm going to wait until everything else fails before I do this. Why? Because if I do this and it still doesn't work, I'm going to be very upset that I went through all this for nothing.
Click to expand...
Click to collapse
Come On Dude Just Try It, It Will Work Like Charm
First Try It Without Reseting Your Phone If Its Not Working Try It With Reset :T
I would try easy root tool also m8. If one doesn't work try something else. I tried 2 methods until it worked. So keep trying m8. It is a learning process in itself:thumbup:
Sent from my D6503 using xda premium from "Somewhere, but not here..."
thank you everyone! i have finally figured out the problem. my computer was broken so i purchased a new one.
stress40 said:
I would try easy root tool also m8. If one doesn't work try something else. I tried 2 methods until it worked. So keep trying m8. It is a learning process in itself:thumbup:
Sent from my D6503 using xda premium from "Somewhere, but not here..."
Click to expand...
Click to collapse
HI everyone
I am using 4.4.4 rooted galaxy alpha with developer mode on.
I have installed usb drivers supplied by samsung, despite many attempts my phones storage wont show up in My computer and because of that i am not able to transfer files to and fro from my phone.
Whenever i try to connect, a notification pops up in my PC saying USB device not recognised, however the phones seems to be charging.
also there is no notification on my phone relating to USB connection with my PC.
i have dchecked into settings and havent seen any menu inside relating to USB connections or Mass storage etc.
please help me with it thankyou
I had this problem a while ago. Turn debugging off and developer options. Then plug in the USB and turn dev/debugging back on. Worked for me
Nope, still not working. its still showing device not recognised
Do u have revoke debugging option?
---------- Post added at 03:00 PM ---------- Previous post was at 02:54 PM ----------
Device not recognised.. didn't see that part.. right click my computer. Select manage.. uninstall the drivers you have for the phone.. then reboot. Reinstall Samsung drivers before plugging in the USB cable.. it should then install no problem
I had the exact same problem.
The problem comes from your usb cable, try with another one.
use this secret cod to access ro sicret menu of MTP
Code: *#0808#
after that chouse MTP+ABD
Try using different usb data cord
hensk said:
use this secret cod to access ro sicret menu of MTP
Code: *#0808#
after that chouse MTP+ABD
Click to expand...
Click to collapse
WOW thanks it worked.
anyways everyone else thanks a lot for your help.
greetings
hensk said:
use this secret cod to access ro sicret menu of mtp
code: *#0808#
after that chouse mtp+abd
Click to expand...
Click to collapse
having this problem as well for a very long time now and this worked like a ****in charm!!!! If i had a sister i would let you date her haha thanks
lol for me it didn`t work...i try with like 10 cables and all the things ... nothing happend...please someone help me