Hi all,
I recently upgraded to CM7 Kang RC1. Before upgrading,I have backup my stock KPD 2.3.4 ROM using CWM 4.0.0.9. I am encountering problem restoring to the stock ROM. After restoring, phone screen frozen at startup at galaxy ace page. Anybody encounter this problem? Advise appreciated. Thanks in advance.
spicediablo said:
Hi all,
I recently upgraded to CM7 Kang RC1. Before upgrading,I have backup my stock KPD 2.3.4 ROM using CWM 4.0.0.9. I am encountering problem restoring to the stock ROM. After restoring, phone screen frozen at startup at galaxy ace page. Anybody encounter this problem? Advise appreciated. Thanks in advance.
Click to expand...
Click to collapse
You need to convert the system partitions back to RFS
Thanks for the quick reply. I assume I am able to do that using cwm? Can you be so kind as to guide me? Thanks!!
spicediablo said:
Thanks for the quick reply. I assume I am able to do that using cwm? Can you be so kind as to guide me? Thanks!!
Click to expand...
Click to collapse
Yes , format all partitions:
-Factory reset
-Wipe cache
-Wipe Dalvik cache
-Format /system
Thank you so much. I am on CM7 right now. It is very much diff from stock rom. I tried to restore swype but to no avail. Would u happen to know how I could do that?
spicediablo said:
Thank you so much. I am on CM7 right now. It is very much diff from stock rom. I tried to restore swype but to no avail. Would u happen to know how I could do that?
Click to expand...
Click to collapse
You need to get the Swype lib .
I managed to install beta version using swype installer. Still getting used to the whole new interface... I suspect as it is RC version, there are still some bugs here and there... but thank you so much for your help!!
More questions,
After upgrading to CM7 Kang RC1, I had problem with Lock menu and Flip4Silence.
Basically they are not working, Flip4silence is version 1.6 while lock menu is version 1.1.3. Since you are using the same firmware as well, I was wondering if u have alternative apps recommendation for this? Thanks.
I've found out that lock menu is redundant as CM7 has its own gesture controlled launcher. However, I'm not sure on flip4silence. Is there such a feature in CM7?
spicediablo said:
I've found out that lock menu is redundant as CM7 has its own gesture controlled launcher. However, I'm not sure on flip4silence. Is there such a feature in CM7?
Click to expand...
Click to collapse
None of such a feature natively. App don't work?
I have to try more to conclude. But for apps like alarm droid, I have configured the alarm to stop when shaked. It seems like it is less responsive and takes around 3 seconds to stop the alarm after I shake...Is it ok to install link2sd in CM7?
I have the same problem with the stuck galaxy ace screen and even if i reset and wipe all these thinhgs you said in CWM 4 and then restored my backup with touchwiz and all my data it doesnt help. Still stucked on the galaxy ace screen.. ( help please..
And I also flashed cooper kang CM 7 rc1 before this happend.. I want my data back :'(
Related
Hi!
Moving over from Desire to SGS2 and I'm excited
Couldnt find a Q-thread on Lite'ning-ROM (as I dont want to ask in dev-thread), so here goes:
After flashing latest 1.3, I get force close on:
com.google.process.gapps
and some more apps like Handcent
Tried wiping cache but no luck..
Any ideas?
If there's a thread I missed out on - plz feel free to delete!
Oh strange, I don't have this problem at all. My advice would be backup all user apps with Titanium Backup and wipe the whole thing.
I hope someone smarter than me can help .
mdmar said:
Hi!
After flashing latest 1.3, I get force close on:
com.google.process.gapps
and some more apps like Handcent
Often fix that sort of problem with a factory reset .
jje
Click to expand...
Click to collapse
Yep, I believe that would sort it also, but ROM-chef states that wipe etc isnt necessary, so if I can avoid a factory reset I would be happy
can i ask those who are on Lite'ning Rom 1.3, can you list all the apps it has stripped? I went to the Lite'ning Rom 1.3 dev page and its a massive 138 pages of info. So far i have memo, wifi sharing as the apps stripped from this rom. Could the OP or anyone list all the apps stripped so i know what to backup before updating from KE7?
thanks heaps
mdmar said:
Yep, I believe that would sort it also, but ROM-chef states that wipe etc isnt necessary, so if I can avoid a factory reset I would be happy
Click to expand...
Click to collapse
Did you do a nandroid backup before flashing? What Kernel were you using?
I had some FC's when I flashed it but that was because I had some incompatible mods (black phone dialer, black in call) that were for KE7.
porkchop8 said:
can i ask those who are on Lite'ning Rom 1.3, can you list all the apps it has stripped? I went to the Lite'ning Rom 1.3 dev page and its a massive 138 pages of info. So far i have memo, wifi sharing as the apps stripped from this rom. Could the OP or anyone list all the apps stripped so i know what to backup before updating from KE7?
thanks heaps
Click to expand...
Click to collapse
Do a nandroid, see whats missing, and then go back if not satisfied/make list of apps to back up
I flashed this on mySGII and I dont think any app was removed afaik!
I didn't have Handecent installed though; so I cant confirm that!
If this is going to be the Question thread for Lite'ning then I'll re-post my issue;
I flashed Litepro's Lite'ning ROM v1.1 a week or so ago and it caused Flash content in the browser to jump and move about whilst scrolling. When still, the content played fine, but the effect when scrolling is very ugly as you can end up with a flash banner accross what you're trying to read.
I went back to stock ROM and all was back to normal.
I've put v1.2 on hoping that the Flash problem might have been noticed and fixed but it's not.
Installed 1.3 and now want to go back
Hi Guys,
I am sorry for this stupid question but I am extremely new to this and have no idea anymore what I'm doing. I was wondering if there was a way to remove this rom and go back to the original one. Is there a way I can go back to the original way I received it. I thought flashing XWKE8 with PDA will return me back back to the original stock
You can find all the orginal stock roms & kernels here:
http://forum.xda-developers.com/showthread.php?t=1075278
Flash them with Odin like you did for Lite'ning
I tried wiping everything, but no luck
I tried flashing XWKE7 Stock Kernel, but no luck
Only way is perhaps to unroot and start over?
arii1986 said:
Do a nandroid, see whats missing, and then go back if not satisfied/make list of apps to back up
Click to expand...
Click to collapse
what i did was use titanium backup to backup all the system apps (e.g. memo, wifi sharing etc)
so after flashing to litepro 1.3 and i want to put some of these apps back, will it work?
Going back to Original Factory Rom
jeremy5390 said:
You can find all the orginal stock roms & kernels here:
http://forum.xda-developers.com/showthread.php?t=1075278
Flash them with Odin like you did for Lite'ning
Click to expand...
Click to collapse
Is their a specific way I have to do it? flashing XWKE8 by PDA doesn't seem to remove Lightening 1.3. I just want the original SII with CF-Root 3.7.
Kavinator said:
Is their a specific way I have to do it? flashing XWKE8 by PDA doesn't seem to remove Lightening 1.3. I just want the original SII with CF-Root 3.7.
Click to expand...
Click to collapse
I used this one:
CWP UK:**cant post url yet :S**
MD5: A5A59AE6374C7FC814E8901B40F7C8AA
I just flashed it as a PDA as per the normal instruction and it seemed to work fine. All apps and data were intact.
Hope it works
mdmar said:
Hi!
Moving over from Desire to SGS2 and I'm excited
Couldnt find a Q-thread on Lite'ning-ROM (as I dont want to ask in dev-thread), so here goes:
After flashing latest 1.3, I get force close on:
com.google.process.gapps
and some more apps like Handcent
Tried wiping cache but no luck..
Any ideas?
If there's a thread I missed out on - plz feel free to delete!
Click to expand...
Click to collapse
I got back to 1.1 + Original KE7, works perfect.
Still problems...
jeremy5390 said:
I used this one:
CWP UK:**cant post url yet :S**
MD5: A5A59AE6374C7FC814E8901B40F7C8AA
I just flashed it as a PDA as per the normal instruction and it seemed to work fine. All apps and data were intact.
Hope it works
Click to expand...
Click to collapse
Last question, I know this sounds n00bish but what is CWP? Is it stock kernel because I tried flashing that and still no luck. I heard I have to flash a bare nandroid backup. Anyone know where I can get those?
porkchop8 said:
what i did was use titanium backup to backup all the system apps (e.g. memo, wifi sharing etc)
so after flashing to litepro 1.3 and i want to put some of these apps back, will it work?
Click to expand...
Click to collapse
anyone know if titanium backup will restore apps on litepro 1.3?
mdmar said:
Hi!
Moving over from Desire to SGS2 and I'm excited
Couldnt find a Q-thread on Lite'ning-ROM (as I dont want to ask in dev-thread), so here goes:
After flashing latest 1.3, I get force close on:
com.google.process.gapps
and some more apps like Handcent
Tried wiping cache but no luck..
Click to expand...
Click to collapse
I like to follow up if anyone else is having the same issue:
had no choice but to unroot. The reflashed from beginning and that solved it!
Kavinator said:
Last question, I know this sounds n00bish but what is CWP? Is it stock kernel because I tried flashing that and still no luck. I heard I have to flash a bare nandroid backup. Anyone know where I can get those?
Click to expand...
Click to collapse
I don't know, I'm a noob too! All I know is that I was able to flash that and my GS2 was back to stock (as far as I could tell) and Lite'ning was gone. All apps and settings remained.
Sorry I can't be more help.
Hi, after install CM9 the phone has no signal, when I was install CM7 on captivate this work fine, but in vibrant is not working, what happened?
Does someone help me, please?
Note: I tried to install a modem to ICS but doesn't work.
Thank you in advance.
Pls try wipe cache and change KERNEL
Pls try wipe cache and change KERNEL
Good Luck！
RanuTo said:
Hi, after install CM9 the phone has no signal, when I was install CM7 on captivate this work fine, but in vibrant is not working, what happened?
Does someone help me, please?
Note: I tried to install a modem to ICS but doesn't work.
Thank you in advance.
Click to expand...
Click to collapse
Try downloading KA7 from here:
http://mediafire.com/modems
Flash it via recovery.
Sent from my CyanogenMod 9 powered Vibrant.
if i using stock rooted rom , can i get samsung updates?
another Q
i deleted samsung app & samsung account , how can i get this apps?
Hi budd...
yes you can get samsung updates on rooted gtab.I've tested it.
Here's the SamsungApps.apk(in the attachment)...
arashtarafar said:
Hi budd...
yes you can get samsung updates on rooted gtab.I've tested it.
Here's the SamsungApps.apk(in the attachment)...
Click to expand...
Click to collapse
thanks a lot
when i checked for updates it didnt ask me for samsung account , so there is no updates
how can i fix this
I can't make sense of what you say but i think cleaning data+cache in clockwork recovery can fix that...
For me it worked for the first time and without need of samsung account.try without it...
arashtarafar said:
I can't make sense of what you say but i think cleaning data+cache in clockwork recovery can fix that...
For me it worked for the first time and without need of samsung account.try without it...
Click to expand...
Click to collapse
it doesn't work
Me too with rooted tab, however, it does check for and download updates and asks for a samsung acc. However, installing the update got a message error. Btw, I'm looking for a fast stable ROM with HC 3.2 and a pre-installed launcher. Anyone got any ideas?
Hi.
to all: go to this address and follow the instructions:
http://www.androidauthority.com/galaxy-tab-10-1-p7500-honeycomb-xwkl1-firmware-72067/
then install samsung apps or a launcher or everything else...
I've flashed it myself several times till now(I've bought my tab nearly a week ago and have almost boomed it)
if you have the same prob again tell me to upload some videos...
Jacko2410 said:
Me too with rooted tab, however, it does check for and download updates and asks for a samsung acc. However, installing the update got a message error. Btw, I'm looking for a fast stable ROM with HC 3.2 and a pre-installed launcher. Anyone got any ideas?
Click to expand...
Click to collapse
If ur loking for stable HC3.2 try Overcome 10.1 Series. Most stable for 3G GTab but removes too much from TouchWiz.
I would personally recommend GALAXY TASK 14 or Clean ROM 2.0 but only if u have WiFi only GTab.
arashtarafar said:
Hi.
to all: go to this address and follow the instructions:
http://www.androidauthority.com/galaxy-tab-10-1-p7500-honeycomb-xwkl1-firmware-72067/
then install samsung apps or a launcher or everything else...
I've flashed it myself several times till now(I've bought my tab nearly a week ago and have almost boomed it)
if you have the same prob again tell me to upload some videos...
Click to expand...
Click to collapse
thanx it work
but why there is no updates?
If you mean updates for android os,Ice cream sandwich and jelly bean have already been released(ICS without camera and JB without anything right now...).
I recommend only ICS CM nightly if you ever want to flash...
I rely on the tab to take pics a lot, so I cant afford to lose the camera. Clean ROM's developer seems to have moved on to another device, so I think I'm gonna go with Task. Thanks!
Ps: This may sound dumb, but how do you update CWM, and how to install the b00sted's themes here ? I downloaded it but have no idea how. Does it run on stock launcher?
Jacko2410 said:
how do you update CWM, and how to install the b00sted's themes? I downloaded it but have no idea how. Does it run on stock launcher?
Click to expand...
Click to collapse
you must flash clockworkmod using odin and pc.get it from:
http://www.clockworkmod.com/rommanager
the b00sted theme doesn't run on the launcher it replaces it...flash this too using clockworkmod...
arashtarafar said:
If you mean updates for android os,Ice cream sandwich and jelly bean have already been released(ICS without camera and JB without anything right now...).
I recommend only ICS CM nightly if you ever want to flash...
Click to expand...
Click to collapse
yes i meant updates for adnroid OS
arashtarafar said:
you must flash clockworkmod using odin and pc.get it from:
the b00sted theme doesn't run on the launcher it replaces it...flash this too using clockworkmod...
Click to expand...
Click to collapse
Yeah, I figured out how. But dont know how to install the CWM touch, it's a *.img file. And about b00sted's themes, I meant do they run with stock ROM, sorry!
Jacko2410 said:
Yeah, I figured out how. But dont know how to install the CWM touch, it's a *.img file. And about b00sted's themes, I meant do they run with stock ROM, sorry!
Click to expand...
Click to collapse
In order to install cwm touch, you have to put it in a .tar file and use odin. Or make a cwm flashable zip.
you can find non-touch recovery in here:
https://sites.google.com/site/arashtarafar/
sorry for the under-construction(UC) parts...
Hi,
I am new in this forum and new to android. I am having it for few days now so don't be mad at me if I will ask something obvious. I installed 2.37 Android 2.3.7 Stock-like yesterday and everything worked like a charm, but then all os freeze. I didn't new what to do so i removed battery and after restart all programs I installed aren't working. I am getting force quit error. If I am re-installing it everything works again, but I want that it wouldn't happen again. Could you explain me what going on and how to prevent this? And what to do if everything freeze?
Thank you for help.
Those things happen sometimes, but not always.
If you haven't shut down the phone properly you may end up with that problem.
And how to shut down it properly if turn off button isnt responding?
lukasig said:
And how to shut down it properly if turn off button isnt responding?
Click to expand...
Click to collapse
Well the button's dead.. nothing can be done..Dont turn off the phone at all!!!!
hello guys,
i'm new at the forum and i tried to install the Android 2.3.7 Stock-like rom.
i was using on my device the psyke83 rom.
before i install i did a data wipe and wiped devicalk cache.
now i'm stuck in the samsung logo!
Can someone help me?
thanks a lot and sorry for the bad english
guioli1988 said:
hello guys,
i'm new at the forum and i tried to install the Android 2.3.7 Stock-like rom.
i was using on my device the psyke83 rom.
before i install i did a data wipe and wiped devicalk cache.
now i'm stuck in the samsung logo!
Can someone help me?
thanks a lot and sorry for the bad english
Click to expand...
Click to collapse
i had the same problem and same rom before
try to install the MIUI rom and if this is working install the stock-like 2.3.7 rom
Have you tried to do full wipe before flashing this ROM?
Guys I have a request (I can't post in "Android Development" section): is there a method to use a partition on microSD as internal memory and install a great number of apps?
Thank you...
lukasig said:
Hi,
I am new in this forum and new to android. I am having it for few days now so don't be mad at me if I will ask something obvious. I installed 2.37 Android 2.3.7 Stock-like yesterday and everything worked like a charm, but then all os freeze. I didn't new what to do so i removed battery and after restart all programs I installed aren't working. I am getting force quit error. If I am re-installing it everything works again, but I want that it wouldn't happen again. Could you explain me what going on and how to prevent this? And what to do if everything freeze?
Thank you for help.
Click to expand...
Click to collapse
Don't use this rom, use psyke83 latest CM7 rom
as a beginner I can´t post in the main thread, sorry
I´ve update from DSC 2.0.1 to 2.1 and now I have not apps that need root and also no wifi :crying::crying::crying::crying:
I didn´t do any nandroid :crying::crying::crying::crying::crying:
next time use dsc 1.0 first... usually anything above 1.0 is for people who already tried dsc 1.0 ...
Root issues
josinho00 said:
as a beginner I can´t post in the main thread, sorry
I´ve update from DSC 2.0.1 to 2.1 and now I have not apps that need root and also no wifi :crying::crying::crying::crying:
I didn´t do any nandroid :crying::crying::crying::crying::crying:
Click to expand...
Click to collapse
I have the same problem, i think nop is looking into it for us.
Meanwhile nandroided back to v2.0.1
i got mine too..wifi doesnt work so i did nandroid
I really don't get it.
I've checked and reflashed update twice already.
Which recovery was used?
_n0p_ said:
I really don't get it.
I've checked and reflashed update twice already.
Which recovery was used?
Click to expand...
Click to collapse
as a very beginner in android I´m not sure that my answer is really what you are asking,
first I updated my original Froyo to Olleh stock rom via streakmode, as the thread in this forum,....after I updated to DSC 2.0 directly over Olleh gingerbread, without passing by DSC 1.0
It worked great, compared to stock rom wich is a potato,.... but now I´ve losed my paradise :crying::crying::crying::crying:
anyway thanks a lot to nop, I will reinstall 2.0, is a very very very good ROM:laugh::laugh::laugh:
josinho00, you entered recovery when you was flashing update.
Which recovery was that?
_n0p_ said:
josinho00, you entered recovery when you was flashing update.
Which recovery was that?
Click to expand...
Click to collapse
I used the streakmode, the one that I´ve downloaded from de forum when I updated from froyo to olleh gingerbread, I really dont know anything more now, I´m not at home and can not look for any more
is that what you want to know nop?
thanks a lot
Yes, thank you.
I have root problem with Dsconfig and Dsc cpu voltage.
Sent from my Dell Streak using xda premium
Fixed.
http://forum.xda-developers.com/showpost.php?p=35054721&postcount=5631
_n0p_ said:
Fixed.
http://forum.xda-developers.com/showpost.php?p=35054721&postcount=5631
Click to expand...
Click to collapse
I´ll try the new patch this afternoon
yesterday nigth I reflashed v 2.0 and after 2.0.1, it became to normal .... wifi was all rigtht and DSC apps also were allright.
but "battery counter" did not work properly (it was full charged and showed just 1%) and some apps like "ES file explorer" did not work with root privilegies, I reflashed superuser zip, and after every thing including battery counter were fixed"""
You should always flash updates on full charge, that'll get rid of 1% problem.
_n0p_ said:
You should always flash updates on full charge, that'll get rid of 1% problem.
Click to expand...
Click to collapse
OK, again thanks a lot,
I´m starting with android, comming from iOS ... I´m learning a lot
congratulations for your ROM it´s really fast and stable ... I´m not missing apple´s OS
Hi pro..how can i use fm on dsc 2.1.thanks
Sent from my Dell Streak using Tapatalk 2
Yes.
I've tried to update DSC 1.7 to 2.0 than 2.2, everything is ok.
After flashing updDSCv2.2-PDroid.zip, system hangs on boot animation.
Using nandroid back to 2.2(no PDroid), system is no problem.
How to fix it? Thanks!
Have you flashed PDroid for 2.0 first?
I understand that's not clear, but you should flash 2.0, then 2.0's Pdroid, then 2.2 with PDroid.
_n0p_ said:
Have you flashed PDroid for 2.0 first?
I understand that's not clear, but you should flash 2.0, then 2.0's Pdroid, then 2.2 with PDroid.
Click to expand...
Click to collapse
Problem solved. Thank you, n0p !
Steps for DSC 2.2 with PDroid
1) Flash DSCv2.0-rel.zip
2) Flash PDroid-v1.31-DSCv2.0.zip
3) Flash updDSCv2.2-PDroid.zip
4) Wipe cache partition, dalvik, fix permissions
5) Reboot
continuing to reboot...
Recently, my phone has been restarted many times. Trying to solve it by reflashing DSC 2.3, but it remains. I flashed the baseband back to 407, it works!
Now it works like a charm but loudly...