Hi,
I am new in this forum and new to android. I am having it for few days now so don't be mad at me if I will ask something obvious. I installed 2.37 Android 2.3.7 Stock-like yesterday and everything worked like a charm, but then all os freeze. I didn't new what to do so i removed battery and after restart all programs I installed aren't working. I am getting force quit error. If I am re-installing it everything works again, but I want that it wouldn't happen again. Could you explain me what going on and how to prevent this? And what to do if everything freeze?
Thank you for help.
Those things happen sometimes, but not always.
If you haven't shut down the phone properly you may end up with that problem.
And how to shut down it properly if turn off button isnt responding?
lukasig said:
And how to shut down it properly if turn off button isnt responding?
Click to expand...
Click to collapse
Well the button's dead.. nothing can be done..Dont turn off the phone at all!!!!
hello guys,
i'm new at the forum and i tried to install the Android 2.3.7 Stock-like rom.
i was using on my device the psyke83 rom.
before i install i did a data wipe and wiped devicalk cache.
now i'm stuck in the samsung logo!
Can someone help me?
thanks a lot and sorry for the bad english
guioli1988 said:
hello guys,
i'm new at the forum and i tried to install the Android 2.3.7 Stock-like rom.
i was using on my device the psyke83 rom.
before i install i did a data wipe and wiped devicalk cache.
now i'm stuck in the samsung logo!
Can someone help me?
thanks a lot and sorry for the bad english
Click to expand...
Click to collapse
i had the same problem and same rom before
try to install the MIUI rom and if this is working install the stock-like 2.3.7 rom
Have you tried to do full wipe before flashing this ROM?
Guys I have a request (I can't post in "Android Development" section): is there a method to use a partition on microSD as internal memory and install a great number of apps?
Thank you...
lukasig said:
Hi,
I am new in this forum and new to android. I am having it for few days now so don't be mad at me if I will ask something obvious. I installed 2.37 Android 2.3.7 Stock-like yesterday and everything worked like a charm, but then all os freeze. I didn't new what to do so i removed battery and after restart all programs I installed aren't working. I am getting force quit error. If I am re-installing it everything works again, but I want that it wouldn't happen again. Could you explain me what going on and how to prevent this? And what to do if everything freeze?
Thank you for help.
Click to expand...
Click to collapse
Don't use this rom, use psyke83 latest CM7 rom
Related
hello every one, please help me i am really frustrated with this problem
I cannot go into browser, market, dialer, and other Google apps because a force close error keeps coming, even when im doing something else on my phone, 5 errors come 1 after another about different apps, they only give me a chance to click force close, then they come back again in 10-15 minuts, or so. The phone was working fine before the update came, when i updated it to "061", it started. please help me. thanks
Best solution clean install of the rom.
if problem still persist, re-flash stock 2.1
and clean install the v 6.1 rom
MrHome said:
Best solution clean install of the rom.
if problem still persist, re-flash stock 2.1
and clean install the v 6.1 rom
Click to expand...
Click to collapse
+1 thonk this is the best option
As do i
Sent from my X10i using XDA Premium App
Are you using data2sd? Cos i had exact same issue with gapps f.c. like every 10 minutes. Wiped and reflashed without data2sd and worked fine again. Or maybe just the wipe and reflash sorted the problem.
sent from my X10i running z's freeX10 b4 and lovin' it
Also try reinstalling the v061 update. Could help ;0
Hi all,
I recently upgraded to CM7 Kang RC1. Before upgrading,I have backup my stock KPD 2.3.4 ROM using CWM 4.0.0.9. I am encountering problem restoring to the stock ROM. After restoring, phone screen frozen at startup at galaxy ace page. Anybody encounter this problem? Advise appreciated. Thanks in advance.
spicediablo said:
Hi all,
I recently upgraded to CM7 Kang RC1. Before upgrading,I have backup my stock KPD 2.3.4 ROM using CWM 4.0.0.9. I am encountering problem restoring to the stock ROM. After restoring, phone screen frozen at startup at galaxy ace page. Anybody encounter this problem? Advise appreciated. Thanks in advance.
Click to expand...
Click to collapse
You need to convert the system partitions back to RFS
Thanks for the quick reply. I assume I am able to do that using cwm? Can you be so kind as to guide me? Thanks!!
spicediablo said:
Thanks for the quick reply. I assume I am able to do that using cwm? Can you be so kind as to guide me? Thanks!!
Click to expand...
Click to collapse
Yes , format all partitions:
-Factory reset
-Wipe cache
-Wipe Dalvik cache
-Format /system
Thank you so much. I am on CM7 right now. It is very much diff from stock rom. I tried to restore swype but to no avail. Would u happen to know how I could do that?
spicediablo said:
Thank you so much. I am on CM7 right now. It is very much diff from stock rom. I tried to restore swype but to no avail. Would u happen to know how I could do that?
Click to expand...
Click to collapse
You need to get the Swype lib .
I managed to install beta version using swype installer. Still getting used to the whole new interface... I suspect as it is RC version, there are still some bugs here and there... but thank you so much for your help!!
More questions,
After upgrading to CM7 Kang RC1, I had problem with Lock menu and Flip4Silence.
Basically they are not working, Flip4silence is version 1.6 while lock menu is version 1.1.3. Since you are using the same firmware as well, I was wondering if u have alternative apps recommendation for this? Thanks.
I've found out that lock menu is redundant as CM7 has its own gesture controlled launcher. However, I'm not sure on flip4silence. Is there such a feature in CM7?
spicediablo said:
I've found out that lock menu is redundant as CM7 has its own gesture controlled launcher. However, I'm not sure on flip4silence. Is there such a feature in CM7?
Click to expand...
Click to collapse
None of such a feature natively. App don't work?
I have to try more to conclude. But for apps like alarm droid, I have configured the alarm to stop when shaked. It seems like it is less responsive and takes around 3 seconds to stop the alarm after I shake...Is it ok to install link2sd in CM7?
I have the same problem with the stuck galaxy ace screen and even if i reset and wipe all these thinhgs you said in CWM 4 and then restored my backup with touchwiz and all my data it doesnt help. Still stucked on the galaxy ace screen.. ( help please..
And I also flashed cooper kang CM 7 rc1 before this happend.. I want my data back :'(
as a beginner I can´t post in the main thread, sorry
I´ve update from DSC 2.0.1 to 2.1 and now I have not apps that need root and also no wifi :crying::crying::crying::crying:
I didn´t do any nandroid :crying::crying::crying::crying::crying:
next time use dsc 1.0 first... usually anything above 1.0 is for people who already tried dsc 1.0 ...
Root issues
josinho00 said:
as a beginner I can´t post in the main thread, sorry
I´ve update from DSC 2.0.1 to 2.1 and now I have not apps that need root and also no wifi :crying::crying::crying::crying:
I didn´t do any nandroid :crying::crying::crying::crying::crying:
Click to expand...
Click to collapse
I have the same problem, i think nop is looking into it for us.
Meanwhile nandroided back to v2.0.1
i got mine too..wifi doesnt work so i did nandroid
I really don't get it.
I've checked and reflashed update twice already.
Which recovery was used?
_n0p_ said:
I really don't get it.
I've checked and reflashed update twice already.
Which recovery was used?
Click to expand...
Click to collapse
as a very beginner in android I´m not sure that my answer is really what you are asking,
first I updated my original Froyo to Olleh stock rom via streakmode, as the thread in this forum,....after I updated to DSC 2.0 directly over Olleh gingerbread, without passing by DSC 1.0
It worked great, compared to stock rom wich is a potato,.... but now I´ve losed my paradise :crying::crying::crying::crying:
anyway thanks a lot to nop, I will reinstall 2.0, is a very very very good ROM:laugh::laugh::laugh:
josinho00, you entered recovery when you was flashing update.
Which recovery was that?
_n0p_ said:
josinho00, you entered recovery when you was flashing update.
Which recovery was that?
Click to expand...
Click to collapse
I used the streakmode, the one that I´ve downloaded from de forum when I updated from froyo to olleh gingerbread, I really dont know anything more now, I´m not at home and can not look for any more
is that what you want to know nop?
thanks a lot
Yes, thank you.
I have root problem with Dsconfig and Dsc cpu voltage.
Sent from my Dell Streak using xda premium
Fixed.
http://forum.xda-developers.com/showpost.php?p=35054721&postcount=5631
_n0p_ said:
Fixed.
http://forum.xda-developers.com/showpost.php?p=35054721&postcount=5631
Click to expand...
Click to collapse
I´ll try the new patch this afternoon
yesterday nigth I reflashed v 2.0 and after 2.0.1, it became to normal .... wifi was all rigtht and DSC apps also were allright.
but "battery counter" did not work properly (it was full charged and showed just 1%) and some apps like "ES file explorer" did not work with root privilegies, I reflashed superuser zip, and after every thing including battery counter were fixed"""
You should always flash updates on full charge, that'll get rid of 1% problem.
_n0p_ said:
You should always flash updates on full charge, that'll get rid of 1% problem.
Click to expand...
Click to collapse
OK, again thanks a lot,
I´m starting with android, comming from iOS ... I´m learning a lot
congratulations for your ROM it´s really fast and stable ... I´m not missing apple´s OS
Hi pro..how can i use fm on dsc 2.1.thanks
Sent from my Dell Streak using Tapatalk 2
Yes.
I've tried to update DSC 1.7 to 2.0 than 2.2, everything is ok.
After flashing updDSCv2.2-PDroid.zip, system hangs on boot animation.
Using nandroid back to 2.2(no PDroid), system is no problem.
How to fix it? Thanks!
Have you flashed PDroid for 2.0 first?
I understand that's not clear, but you should flash 2.0, then 2.0's Pdroid, then 2.2 with PDroid.
_n0p_ said:
Have you flashed PDroid for 2.0 first?
I understand that's not clear, but you should flash 2.0, then 2.0's Pdroid, then 2.2 with PDroid.
Click to expand...
Click to collapse
Problem solved. Thank you, n0p !
Steps for DSC 2.2 with PDroid
1) Flash DSCv2.0-rel.zip
2) Flash PDroid-v1.31-DSCv2.0.zip
3) Flash updDSCv2.2-PDroid.zip
4) Wipe cache partition, dalvik, fix permissions
5) Reboot
continuing to reboot...
Recently, my phone has been restarted many times. Trying to solve it by reflashing DSC 2.3, but it remains. I flashed the baseband back to 407, it works!
Now it works like a charm but loudly...
Hello everybody,
I have problem, after I flashed omega v39(after that I try flash another roms and still the same) is my galaxy s3 laggy, some aplication doens´t work and wipe data/factory reset takes little bit longer.
I tried another version of CWM and it doesn´t help.
Thanks for help
Well... What do you want to know?
try aosp then. Read up on how to install
orangerot. said:
Well... What do you want to know?
Click to expand...
Click to collapse
well, what´s wrong? I don´t understand why this happed right now because I flash allmost every new omega roms. I need to get it back. Hope it´s possible.
dada.cz said:
well, what´s wrong? I don´t understand why this happed right now because I flash allmost every new omega roms. I need to get it back. Hope it´s possible.
Click to expand...
Click to collapse
Omega questions in the Omega thread do not post multiple times the same question .
A guess is that it was a bad flash wipe phone re download rom or use V40 and flash again .
Problems flash stock rom .
jje
Well, i already warning my english is not good.
My trouble is when i'm install the "Arcatarc's SuperleggeraV6", i do "full wipe": factory reset, wipe data, wipe system...
So flash the " Arcatarc's SuperleggeraV6" base rom, after i install the patch for my neo v, i reboot, and the phone keeps rebooting, appears the kernel logo, so appears "xperia" what is the rom starter, and the phone reboot again, and start all of this.
Someone can help me?
notes:
the kernel works in another ICS rom, i followed every step of the thread, and i'm not a noob (i flash roms by the last 2 years)
Arcatarc's SuperleggeraV6 thread:
http://forum.xda-developers.com/showthread.php?t=2290310
Sorry again for my horrible english.
(i learned by myself)
You need to flash: 1 baserom->2 odexed or deodexed pack->3 device patch..
Inviato da me!
Thanks, i will try.
thanks man, i had installed your rom right and i tested the rom, sorry, but, the rom don't work perfect on my phone, it keeps "lagging", i will come back to another rom, sorry.
Sherlocked said:
thanks man, i had installed your rom right and i tested the rom, sorry, but, the rom don't work perfect on my phone, it keeps "lagging", i will come back to another rom, sorry.
Click to expand...
Click to collapse
Hmm,strange,you're the first one reporting lag on Superleggera....
Inviato da me!
Maybe i had done one thing wrong, but nice rom anyway.