Related
Hey guys,
I was wondering if these USB car chargers are compatible for the TP2?
http://cgi.ebay.com/Dual-2-Ports-US...Accessories?hash=item518f99b7a9#ht_3242wt_958
and
http://cgi.ebay.com/DC-Car-Cigarett...wItemQQptZPDA_Accessories?hash=item3a567814a2
and
http://cgi.ebay.com/Silver-Mini-Uni...Accessories?hash=item414bbc871c#ht_2000wt_958
I'm asking because I remember in the past I used a HTC charger to charge the O2 XDA Flame and it charged. However, the phone started acting VERY weird and freeze a lot. I ended up having to hard reset it
Thanks!
I think any USB charger for electronic gaget that has a output of 5.0 v should work. It does not matter if it is an AC charger or and car lighter charger. I got one of these AC and another car lighter charger. There are all 5.0 v output. I use them to charge Ipod and phones.
chompx2 said:
I think any USB charger for electronic gaget that has a output of 5.0 v should work. It does not matter if it is an AC charger or and car lighter charger. I got one of these AC and another car lighter charger. There are all 5.0 v output. I use them to charge Ipod and phones.
Click to expand...
Click to collapse
Thank you
It's best to choose one that can supply enough current (I think the wall charger supplies 2A, but 1A should be ok). Some devices will still trickle charge with a lower current, but others just won't trigger the charging circuits at all.
I had a cheap car charger that seemed to work ok most of the time, but it got worryingly hot after a while.
My TP2 came with an official HTC charger, so I use that now and it's great.
I have noticed that if the phone is OFF then 1A is not enough and usually stops charging but if the phone is ON it completes the charge..but takes for ever.
Has anyone experienced the charging overheat situation where the led flashes orange and green? I dont know if that is the situation but it only happens when I am charging in the car and the unit gets hot.
My old "OEM HTC" charger I got on ebay (the one with the blue HTC light) just stopped charging my phone after about 10-15 uses.
It lights on (charger), but my phone doesn't catch any charge lol
I got a 1A one, and unfortunately it cannot produce enough juice when running the GPS (copilot), after a while the phone shows a message telling the charge current is not enough.
The wall charger that came with the original box is 1A too, thus the problem might be with the cheap car charger.
Brando sells a 2A car adapter that should do the trick. They're out of stock right now, but it may be worth a look.
Hey!
Mine is a cheapo but does the trick. Charges the phone with satnav running, today went from 23% to full in less than 3 hours. Plus it's really tiny so I can keep my ashtray closed all the time. Using it with mini retractable cable, it all fits in the ashtray and it's handy to use.
http://cgi.ebay.co.uk/Micro-Nano-Ti...daptors_SM?hash=item5638c26773#ht_1747wt_1165
3waygeek said:
Brando sells a 2A car adapter that should do the trick. They're out of stock right now, but it may be worth a look.
Click to expand...
Click to collapse
The manual states that the output of the AC charger is 5.0 volts and 1 amp. That means the output of the DC/car charger should be the same. Using a 2 amp current might be charging the device faster but it would probably generate more heat and might shorten the battery life.
one tip, regardless of which charger you end up with, is to not leave the phone plugged in while starting the car. my understanding is that there can be be large voltage surges or fluctuations during the startup. depending on the design on the voltage converter inside the charger, some of that may be making it through to the phone.
i once had a AA NiCd battery smart charger that went wonky after using it in the car a lot, but that was with a straight-through 12V car to charger connector.
I made my own charger for using as a GPS on my motorcycles.
There is a charge select line in the plug. If the phone detects that it is connected to a USB port, the phone will not 'pull' more the 500ma. If that line is set to indicate a non USB port, then the phone will pull 1 amp. MAX (I never saw more then 900ma myself).
If you have the wrong charge plug, it may only charge at 500ma. If you have the correct plug and the charger can manage 5 amps, the phone will still only take 1 amp max.
For a while I used the phone in a waterproof box called an Aquabox. It would overheat during charging. I now only charge the phone when it is not in an enclosed hot space.
I'm still using the off-brand 'for Blackberry' car charger I got back when I had my Kaiser. Seems to be working just fine with this phone as well.
http://maxborgesagency.com/press/bracketron-launches-dual-usb-charger/
$24.99 dual USB Cigarette lighter adapter 1 & 2 amp
Reeves360 said:
http://maxborgesagency.com/press/bracketron-launches-dual-usb-charger/
$24.99 dual USB Cigarette lighter adapter 1 & 2 amp
Click to expand...
Click to collapse
Unfortunately, worthless.
Transformer needs 11v-15v to charge reasonably well. Any 5v charger, even at 1000000 amps, will not charge the TF with screen lit, or charge takes days with TF turned off.
Much harder to find auto chargers in the 11v-15v range, some that say 12v are actually not. I found one advertised as 12v (that measures 9.8v actually) and it also did not charge TF. Good luck.
Wont work. Unlike most devices the Transformer does not use 5v to charge like the iPhone and many other Android devices. It does use USB but it will only charge via Asus's special chargers. This is because our Transformers charge via 15volt and the charger cable is actually a USB 3.0 cable that has extra pins in back, and the 15volt pin is one of these extra pins the USB 3.0 layout provides.
Edit Bob Smith42 beat me to it by a few seconds lol
Be aware that it's incorrect to say that the TF won't charge from a standard USB charger. It does charge however it only trickle charges and therefore takes much longer. So let's make sure we are clear when we respond about what works and what doesn't. I used my iPad 2 amp charger on the TF and went from about 30% charge to about 85% charge in about 6 hours (screen off). The absolute fastest way to trickle charge from a generic adapter is with the TF powered off. Hopefully Asus will come out their own car adapter for the TF.
The charger that the original poster mentioned WILL trickle charge the TF. Also new TF users should know that the TF will not give any charging indications when plugged into anything other than the Asus charger - but it is trickle charging none-the-less.
w4rmk said:
The charger that the original poster mentioned WILL trickle charge the TF. Also new TF users should know that the TF will not give any charging indications when plugged into anything other than the Asus charger - but it is trickle charging none-the-less.
Click to expand...
Click to collapse
One thing to mention that you can do if you have the tock is trickl-echarge THAT while still using the pad... then in 5-6 hours when the padd is getting low, you can dock it, and it will charge off of the dock while you keep using it. Once fully charged, undock it again, etc. This is what I want to do, and why I want a second USB cable.
I noticed a lot of people want a fast charger for the Note. This charger is for the Touchpad. I have this and it works really well. It charges faster than the OEM charger that came with the Note.
Not to mention, it is on sale right now for less than $5. Go grab one. From past experience, I used this at 15% battery life and charged for an hour and I was back over to 80%.:victory:
http://www.shopping.hp.com/en_US/ho.../FB341AA?HP-TouchPad-Power-Charger&aoid=35252
Is the usb cable that comes with it the same as the note takes?they don't show a pic of the other end and is it a charge only cable?If yes and yes I'm a gonna get one.Thanks
technut said:
Is the usb cable that comes with it the same as the note takes?they don't show a pic of the other end and is it a charge only cable?If yes and yes I'm a gonna get one.Thanks
Click to expand...
Click to collapse
Yes, it is a micro USB cable. One end is USB and other is micro USB. The cable length is longer than most phone cables. I haven't measured it, but from my plug to my desk, I still have excess cable compared to the original one from the phone.
Thank you, getting one!
This have been discussed hundreds time before....
That 1amp is the output of the charger which forwards the current to kernel of the device... NOTE can only intake 1 amp current... ( remove your battery and read the dam sticker :thumbup
Even though you will supply 2 3 4 5 amp... The maximum in would be 1 amp ONLY...
SECONDLY, micro usb cables have a restriction of carrying current... They cannot pass more than 1 amp current successfully... Therefore galaxy tab series does not come with micro usb slots....
Lastly my recommendation would be NOT to waste money on any other chargers...
Noted by the BEAST!!
dx.varun said:
This have been discussed hundreds time before....
That 1amp is the output of the charger which forwards the current to kernel of the device... NOTE can only intake 1 amp current... ( remove your battery and read the dam sticker :thumbup
Even though you will supply 2 3 4 5 amp... The maximum in would be 1 amp ONLY...
SECONDLY, micro usb cables have a restriction of carrying current... They cannot pass more than 1 amp current successfully... Therefore galaxy tab series does not come with micro usb slots....
Lastly my recommendation would be NOT to waste money on any other chargers...
Noted by the BEAST!!
Click to expand...
Click to collapse
It has been discussed, but it DOES charge faster than a conventional 1amp charger. If you don't have the charger and have nothing to compare with, then I don't think you can say it does not work.
Go check FCC about the charge. Also, the cables provided DOES carry a 2amp charge. Our note can handle fast charging but throttles down to a slower charging rate after 80%.
having a micro usb slot or not have a micro usb slot has nothing to do with the current it can handle.
Ipads and Iphones have the same connector but yet one has a 1amp charger and the other a 2amp charger.
deliriousbb said:
It has been discussed, but it DOES charge faster than a conventional 1amp charger. If you don't have the charger and have nothing to compare with, then I don't think you can say it does not work.
Go check FCC about the charge. Also, the cables provided DOES carry a 2amp charge. Our note can handle fast charging but throttles down to a slower charging rate after 80%.
having a micro usb slot or not have a micro usb slot has nothing to do with the current it can handle.
Ipads and Iphones have the same connector but yet one has a 1amp charger and the other a 2amp charger.
Click to expand...
Click to collapse
Firstly, I have tried to use with a 2amp charger that came with my SGT P1000.. NO DIFFERENCE...
SECONDLY, PULL OUT BATTERY AND READ!
Google for micro usb cable max output... You will get your answers...
Noted by the BEAST!!
dx.varun said:
This have been discussed hundreds time before....
That 1amp is the output of the charger which forwards the current to kernel of the device... NOTE can only intake 1 amp current... ( remove your battery and read the dam sticker :thumbup
Even though you will supply 2 3 4 5 amp... The maximum in would be 1 amp ONLY...
SECONDLY, micro usb cables have a restriction of carrying current... They cannot pass more than 1 amp current successfully... Therefore galaxy tab series does not come with micro usb slots....
Lastly my recommendation would be NOT to waste money on any other chargers...
Noted by the BEAST!!
Click to expand...
Click to collapse
deliriousbb said:
It has been discussed, but it DOES charge faster than a conventional 1amp charger. If you don't have the charger and have nothing to compare with, then I don't think you can say it does not work.
Go check FCC about the charge. Also, the cables provided DOES carry a 2amp charge. Our note can handle fast charging but throttles down to a slower charging rate after 80%.
having a micro usb slot or not have a micro usb slot has nothing to do with the current it can handle.
Ipads and Iphones have the same connector but yet one has a 1amp charger and the other a 2amp charger.
Click to expand...
Click to collapse
Well its $5, which is not worth this discussion, I'll gladly give this money even for the stock samsung charger.
i_max2k2 said:
Well its $5, which is not worth this discussion, I'll gladly give this money even for the stock samsung charger.
Click to expand...
Click to collapse
Agreed! A good charger for cheap.
dx.varun said:
Firstly, I have tried to use with a 2amp charger that came with my SGT P1000.. NO DIFFERENCE...
SECONDLY, PULL OUT BATTERY AND READ!
Google for micro usb cable max output... You will get your answers...
Noted by the BEAST!!
Click to expand...
Click to collapse
You don't have to get your panties in a twist. Rather than just read forums and assume the worst of everything try it for yourself. I've tried both and it is faster. Just trying to help my fellow Note users to get the best out of their phones.
btw, what are you screaming about pull out the battery and read? you tell me what you want us to know. RATED: 3.7V; 1500mA... WOW ok that proves your point...sigh:silly:
dx.varun said:
This have been discussed hundreds time before....
That 1amp is the output of the charger which forwards the current to kernel of the device... NOTE can only intake 1 amp current... ( remove your battery and read the dam sticker :thumbup
Even though you will supply 2 3 4 5 amp... The maximum in would be 1 amp ONLY...
SECONDLY, micro usb cables have a restriction of carrying current... They cannot pass more than 1 amp current successfully... Therefore galaxy tab series does not come with micro usb slots....
Lastly my recommendation would be NOT to waste money on any other chargers...
Noted by the BEAST!!
Click to expand...
Click to collapse
As an HP TouchPad owner, I can confirm that the cable provided with the charger are 'special'. My TP will not charge with any other MicroUSB cable connected to the official charger, the same cables which won't charge the TP will charge the Note. (I also own the HP touchstone dock, which the TP spends most of it's life sitting on.)
deliriousbb said:
It has been discussed, but it DOES charge faster than a conventional 1amp charger.
Click to expand...
Click to collapse
I have four different wall chargers, including two of this HP barrel adapter (one that came with the TouchPad, one that came with the Touchstone). With the supplied cable, it does charge the TouchPad very quickly. From webOS, the net charge rate is about 1.6 A with the screen on, so probably close to 2 A coming out the USB port.
However, when you plug a Note into this charger, the Note will still only draw 1 A. I have other AC chargers that are also able to supply 1 A to the Note, so in that respect this HP charger isn't anything special. However, it is only $5, which is a good deal.
---------- Post added at 11:39 PM ---------- Previous post was at 11:14 PM ----------
pTeronaut said:
My TP will not charge with any other MicroUSB cable connected to the official charger, the same cables which won't charge the TP will charge the Note.
Click to expand...
Click to collapse
I've found that the microUSB cable that comes with the Note, when paired with the HP TouchPad's AC charger, will supply 2 A. At least, that's what the OS reports: /sys/devices/platform/usb_gadget/current-mA shows "2000". Plugging the TouchPad into the Note's AC charger shows a value of "900". Plugging it into my laptop's USB port drops that value down to "500", as expected.
I bought two a week ago off Amazon for $10 each. $5 each with free shipping is a steal. I picked up three more. Thanks for posting this deal. I get 1A charging with either the stock charger or TP charger. I like to have a few extra chargers to sprinkle around at home or work (for my Note and the other devices I own that charge off USB.... including a TP).
deliriousbb said:
Yes, it is a micro USB cable. One end is USB and other is micro USB. The cable length is longer than most phone cables. I haven't measured it, but from my plug to my desk, I still have excess cable compared to the original one from the phone.
Click to expand...
Click to collapse
When you charge your phone using this HP microUSB cable, do you have issue with NO DEEP SLEEP when unplugging the Note from the charger?
There has been issues reported in XDA where, depending on the USB cables used to charge the Note (connected to computer OR power charger), if you unplug the Note, it will not go DEEP SLEEP, causing significant power drain.
This does NOT happen when the Note is charged using the cable that came with the Note.
Download Current Widget from the play store. Add widget to home screen and you will realize that your phone is not charging any more than 1 amp as designed.
Try the usb out from your pc and you will see about half an amp.
Sent from my SAMSUNG-SGH-I717 using xda premium
I have the galaxy tab brick charger the HP touch pad charger and my note charging brick....the touchpad charger works faster...but I feel like it doesn't get fully charged..seems to die faster?. I used the galaxy tab brick...slow to charge warms my phone up nicely...I'd stick with the original note charger.
Sent from my SAMSUNG-SGH-I717 using xda premium
lanwarrior said:
When you charge your phone using this HP microUSB cable, do you have issue with NO DEEP SLEEP when unplugging the Note from the charger?
There has been issues reported in XDA where, depending on the USB cables used to charge the Note (connected to computer OR power charger), if you unplug the Note, it will not go DEEP SLEEP, causing significant power drain.
This does NOT happen when the Note is charged using the cable that came with the Note.
Click to expand...
Click to collapse
I charge my Note overnight using my Touchpad's MicroUSB cable plugged into the Samsung charger, and I don't experience any difference in power drain.
Where is that post from the guy who put all these petty arguments to rest with scientific tests of all the various options and results??
Good lord people it's a charger for a phone .. no need to get so heated!
(unlike my stock charger.. which gets very heated!)
great price!!!
ordered 3 of them
the price is way cheaper than just a single micro usb cable shipped from other stores
i have 3 already
1 at work, 2 for home.
definitely faster than OEM. I charge overnight, no issues. had for around 5-6 months now. and i can use the phone while charging.
fact is that it DOES charge faster.
i recommend it
WOW***
Great price I bought 2!
Hi all,
When I use the charger that came with the HTC One my phone charges great, rapid.
But when I use any other charger that I have in my home/office it charges very slow. Even with a 2.1 amp charger!
The charger that comes with the phone has an output of 1 amp.
I've tried multiple other chargers (1 amp and 2.1 amp) and they all trickle charge.
Anyone else noticing this?
Thanks
Joe
I'm using old charges at home and in the office and it did seems slow but had not heard of rapid charge. Will the phone indicate this rapid charge mode? If not, is it real?
I'm getting slow charging even on the stock HTC charger. Not sure how I can enable this rapid charge cause 4+ hours from 0-1% to full is a bit ridiculous.
use orginal charger is best , maybe it has some relationship with your battery life
If anyone is coming from phones with smaller batteries, remember the larger the capacity the long it takes to charge.
I use the cable and charger from my Nexus 7 and it charges fast. Off my USB it is slow.
Real AC chargers have two pins shorted. You can hack a USB to micro USB cable and short the same two pins to enable AC charging with any adapter, wall, USB, or car. Should be pins 3+4, but don't hold me to that.
Sent from my HTC One using xda app-developers app
flooty333 said:
Hi all,
When I use the charger that came with the HTC One my phone charges great, rapid.
But when I use any other charger that I have in my home/office it charges very slow. Even with a 2.1 amp charger!
The charger that comes with the phone has an output of 1 amp.
I've tried multiple other chargers (1 amp and 2.1 amp) and they all trickle charge.
Anyone else noticing this?
Thanks
Joe
Click to expand...
Click to collapse
Try to change your phone
c5satellite2 said:
Real AC chargers have two pins shorted. You can hack a USB to micro USB cable and short the same two pins to enable AC charging with any adapter, wall, USB, or car. Should be pins 3+4, but don't hold me to that.
Sent from my HTC One using xda app-developers app
Click to expand...
Click to collapse
i've done exactly this, and damned if the One still refuses to draw more than ~500 ma off of anything but the 2.1 A wallwart it came with (i don't have any others to try with). i'm about to dig out an old inverter to see if that will actually work. wish i'd paid more attention to my EE dad when i lived at home; i've gotten a serious crash course in this stuff while trying to get my One to charge in my car, when it's on.
edit: so i got my old inverter out, and spent about 15 minutes testing. i used the 2.0A adapter that came with my Nexus 7 to test, as well as the 3.1A Mediabridge adapter i got here. my phone was at about 45% when i started testing. unplugged, Battery Monitor Widget reported a drain of anywhere between 500ma and 650ma (running Ingress, wifi on). plugged in to the Mediabridge adapter showed, at best, a drain of 50ma. the Nexus adapter plugged in to my inverter charged at a fairly consistent ~120ma. i didn't touch my phone the entire time.
i left my Nexus 7 at work so i can't use it to repeat the test, but i will do so tomorrow. the cable i'm using is this one. i'm not crazy about having a ridiculous DC-AC inverter in my car for my phone, but if that's what i have to do so it can be used and not drain, then so be it. admittedly, i don't really understand these things enough to explain these variations, but i plan on learning ASAP. perhaps somebody else can shed some light on why the device charges different, and how it identifies an AC-USB adapter vs a DC-USB adapter.
sluflyer06 said:
If anyone is coming from phones with smaller batteries, remember the larger the capacity the long it takes to charge.
Click to expand...
Click to collapse
Math doesn't support what is happening though. Phone has a 2300mAh battery. The OEM charger outputs 1A (1000mAh)
At most, it should be around 3 hours for full charge, when in fact it is closer to 4-4.5 hours. It's the last 10% that is the issue, it will trickle charge to 100% rather than rapid charge.
nest75068 said:
Math doesn't support what is happening though. Phone has a 2300mAh battery. The OEM charger outputs 1A (1000mAh)
At most, it should be around 3 hours for full charge, when in fact it is closer to 4-4.5 hours. It's the last 10% that is the issue, it will trickle charge to 100% rather than rapid charge.
Click to expand...
Click to collapse
Yes, I think that's exactly what the HTC does... I read a pretty good article recently about Li-Ion batteries that talks about how trickle charging is the best for battery life, and it wouldn't surprise me if HTC got a little aggressive the way the this phone charges since we can't swap the battery ourselves.
I'm trying one last car charger, which matches the wattage of my Nexus 7's 5Vdc/2A AC adapter (which I've had the best luck with, when charging the phone while in use): http://www.amazon.com/gp/product/B009TBF7IG/ref=oh_details_o00_s00_i00?ie=UTF8&psc=1
If that doesn't work, I'm going to put a 300W inverter in my car with the AC adapters themselves and stop buying stinking DC adapters. This phone clearly pays very close attention to the wattage available from whatever it's plugged in to.
veener79 said:
I use the cable and charger from my Nexus 7 and it charges fast. Off my USB it is slow.
Click to expand...
Click to collapse
Same here, 2a Nexus 7 brick with a long Logitech USB cable, much faster than stock (and longer)
Harbinger1080 said:
Yes, I think that's exactly what the HTC does... I read a pretty good article recently about Li-Ion batteries that talks about how trickle charging is the best for battery life, and it wouldn't surprise me if HTC got a little aggressive the way the this phone charges since we can't swap the battery ourselves.
I'm trying one last car charger, which matches the wattage of my Nexus 7's 5Vdc/2A AC adapter (which I've had the best luck with, when charging the phone while in use): http://www.amazon.com/gp/product/B009TBF7IG/ref=oh_details_o00_s00_i00?ie=UTF8&psc=1
If that doesn't work, I'm going to put a 300W inverter in my car with the AC adapters themselves and stop buying stinking DC adapters. This phone clearly pays very close attention to the wattage available from whatever it's plugged in to.
Click to expand...
Click to collapse
I'm fortunate my car has a built in inverter that I use for charging my phone.
nest75068 said:
I'm fortunate my car has a built in inverter that I use for charging my phone.
Click to expand...
Click to collapse
My next car will too, because I can only imagine that power requirements for these devices is going to increase.
That said, I think I have a winner, and instead of retyping my posts, I'll just link to that thread instead: http://forum.xda-developers.com/showpost.php?p=41797839&postcount=6
Since the snap Dragon 600 has fast charging capabilities, why didn't HTC Include it in the kernel??? I've noticed my 2500 mAh note battery charges faster than my 2300 MAH HTC one
Sent from the Sexiest Android Device (HTC One)
Since I got my note 3 I've been charging it with my old AC chargers I bought on ebay which is a generic micro-usb charger (I got a couple of them laying around the appartment). I use my old chargers often because the samsung USB cable which was provided with the phone is always pluged into my desktop computer, and I didn't want to go trough the hassle of moving the cable all around the house to charge my phone.
Well anyway, so far I've notice charging times were pretty long(6-8hours), but I shrugged it off because I simply thought a bigger battery require longer to charge. But this weekend I slept off at my in-laws and I brought my samsung cable and AC adapter. I looked up with better battery stats and notice the charge time was around 3times as fast. (2hours or so for a 100% charge). Dammmn!
So why am I getting long charges with my ebay chargers?
Is it because they are cheap china product?
Is it because they don't have the USB3.0 port?
I'm thinking the USB3.0 has nothing to do with charging times if it's pluged with an AC adapter right? So my long charge time must be because of cheap products? Ok then, but if I want to buy additional chargers, or even a cradle for my bedside table. How can I know if they will have the best charge time? Am I forced to buy samsung branded stuff just to make sure?
Cause I'd be interested in something like this :
http://www.ebay.ca/itm/For-Samsung-Galaxy-Note-2-3-Cradle-Sync-Dock-Mode-2-1-amp-Otterbox-Fits-/251362752408?pt=US_Cell_Phone_PDA_Chargers&hash=item3a86633798&_uhb=1
but I'm not gonna buy it if it takes double/triple charging time..
Patbach said:
Since I got my note 3 I've been charging it with my old AC chargers I bought on ebay which is a generic micro-usb charger (I got a couple of them laying around the appartment).
Click to expand...
Click to collapse
The Note 3 should charge in just over two hours with either USB 2 or 3 cables. If you download https://play.google.com/store/apps/details?id=com.abmantis.galaxychargingcurrent.free&hl=en that will tell you the charging current. It should be 1200mA with the screen on and 1800mA with it off (trick is turn the screen off for 10s then back on and refresh and you should see 1800mA).
As long as the charger can deliver 1800mA and you are using a decent quality cable that should be all you need. Plugged into a USB port you'll only see 450mA on either USB 2 or 3.
Usually the ones that charge this quickly have an output of 2 amps. That is the output of the charger that came with the phone.
Sent from my Verizon Samsung Galaxy Note III.
Prevous Owner/Hacker of... numerous other devices!
CraigAmey said:
The Note 3 should charge in just over two hours with either USB 2 or 3 cables. If you download https://play.google.com/store/apps/details?id=com.abmantis.galaxychargingcurrent.free&hl=en that will tell you the charging current. It should be 1200mA with the screen on and 1800mA with it off (trick is turn the screen off for 10s then back on and refresh and you should see 1800mA).
As long as the charger can deliver 1800mA and you are using a decent quality cable that should be all you need. Plugged into a USB port you'll only see 450mA on either USB 2 or 3.
Click to expand...
Click to collapse
wow thanks there lots of useful stuff