Hi , frens I got flash tool installed last time (latest version) incl all x10 mini pro driver with SE PC companions, I do all the steps correctly to flash Android 2.1 but is says "Unplug and turn USB debugging on" but I have already turn the USB debugging on, I have repeated these steps many times but hopeless...
Any idea or inspirations about these problem because my frens'x10mini pro have Android 1.6>>>
Help
Do you have the correct baseband? Not sure if it matters but check it any way Try to install the older version of the flash tool.
Sent from my U20i using xda premium
Black Plague said:
Hi , frens I got flash tool installed last time (latest version) incl all x10 mini pro driver with SE PC companions, I do all the steps correctly to flash Android 2.1 but is says "Unplug and turn USB debugging on" but I have already turn the USB debugging on, I have repeated these steps many times but hopeless...
Any idea or inspirations about these problem because my frens'x10mini pro have Android 1.6>>>
Help
Click to expand...
Click to collapse
the log always finish by this sentence
what are the lines before??
can you give more details as to what you are doing?
is your phone working fine? can it boot at least to the white sony ericsson logo?
if not, what does it do when you are trying to turn it on?
are you upgrading to a new update?
It is my fren's phone x10 mini pro old one with android 1.6, everything is working, I have rooted it using super one click and.....then I got flash tool error
1.6?
if your phone still boots, then it is better to use PC companion to update to newer firmware.
if your phone is branded, better read the Flashtool thread thoroughly.
and yes, x10 mini pro =/= x10 mini.
be careful what firmware you put in. it needs to be either u20i or u20a for the x10 mini pro.
Related
Hi
i tried to downgrade my X10 mini pro to 1.6 with this guide :
X10 Mini Pro 1.6 for Flashtool(Step-by-Step Guide & Getting Your Local 2.1))
but it did not work.
Then i tried to flash a other 2.1 region with this guide:
X10 Mini Pro 2.1 incl. Flashtool (Updated: Regions 9.11.2010)
I got no errors during this or the first guide.
But when i try to turn on my phone now it just vibrates shortly and nothing happens.
And when i connect it to usb it seems, that it just goes straight into flash mode, but the green led is blinking (every 10 seconds)
So that i cannot flash a firmware because it disconnects from my pc every
10-15 seconds.
I hope there is a solution for my problem.
maybe some kind of hard reset?
im thankful for every answer....
ps. sorry but for some reason i cant write the links to the guides and sorry for my bad english
repair via seus .... after the update or flash phone take time to start so waitt for few minutes....
Thanks man,
you are my hero
i still dont understand why it stops disconnecting when i use seus but it worked and my phone is running again
Hello, i need help because my X10 mini and not light or the sony logo, wanting to increase the baseband but I put a want of x8, now I've done everything but does not work, sony companion and seus says I have the latest software, and install a version 1.6 flashx10 e10i (when mine was E10A) accept the installation but still does not turn, I'm really desperate, I can only enter the flash mode, but I can not do anything else, and angry While Sony does not want to update the phone (which is why I wanted to minicm) and those who create custom rom both have to be well received thanks but when help ignore a problem, please help nesecito now.
Use Flash tools.
first download Flash tools
http://forum.xda-developers.com/showthread.php?t=920746
after download firmware
http://forum.xda-developers.com/showthread.php?t=825664
Ok im downloading the flashtool and e10a firm, but in the last time i got a UPDATE OF 15 hours, its normal to flash the phone got that time?
I succesful flash the phone, but now, i cant go to the flash mode, and the phone now completely dont turn on, only the red led flash 3 times, WTF? help
I also had the same problem . The red led flash three times because your phones battery is dead. So you plug in your phone with usb cable to the computer and let it remain for two or more hour . During this time the phone would not turn on and you can do nothing with your phone during this time. You will only see the red led . After two hours of charging disconnect and run seus and Follow the onscreen instruction. I followed the above mentioned procedure and I got my mini back .
Sent from my X10mini using XDA Premium App
Hi guys!
I think I killed my phone. I upgraded to the GingerDx - V13 ROM, the first day it was working fine. Then the next day the screen is getting messed up until it won't start anymore. I tried using PC companion to hopefully factory reset it but (which it manages to finish the restoration) but now it is really not booting. It just lights up and then turns off. No SE logo or anything. Now I'm stuck as I don't know what to do next.
Thanks in advance to anyone that can help.
pabling19 said:
Hi guys!
I think I killed my phone. I upgraded to the GingerDx - V13 ROM, the first day it was working fine. Then the next day the screen is getting messed up until it won't start anymore. I tried using PC companion to hopefully factory reset it but (which it manages to finish the restoration) but now it is really not booting. It just lights up and then turns off. No SE logo or anything. Now I'm stuck as I don't know what to do next.
Thanks in advance to anyone that can help.
Click to expand...
Click to collapse
PC companion is not good.. try flash with SEUS..!! Google it..u may find a download..
In order to restore a bricked mini pro:
-Launch SEUS (NOT PC Companion)
-When asked to plug the phone, press Home+Back (and keep them pressed) and then plug the phone on usb.
-Release Home and only keep the "back" button pressed.
If you followed the sequence properly, you will see the green led on and flashing process will start. If not, try it again.
faiyyaz said:
PC companion is not good.. try flash with SEUS..!! Google it..u may find a download..
In order to restore a bricked mini pro:
-Launch SEUS (NOT PC Companion)
-When asked to plug the phone, press Home+Back (and keep them pressed) and then plug the phone on usb.
-Release Home and only keep the "back" button pressed.
If you followed the sequence properly, you will see the green led on and flashing process will start. If not, try it again.
Click to expand...
Click to collapse
I forgot to say that my LED is not working anymore (dunno why) I am trying to find SEUS installer. It seemed like you can't download it through SE's website.
EDIT:
WTF?! I dunno there's another XPERIA Mini Pro which is NOT X10 Mini Pro. I flashed my X10 Mini Pro with the Xperia Mini Pro ROM Maybe that's why it's not booting anymore.
I tried reflashing it with the correct X10 Mini Pro (via PC Companion) ROM but still no effect. Maybe I messed up the phone big time? I will try SEUS if I can find one. I hope it works.
pabling19 said:
I forgot to say that my LED is not working anymore (dunno why) I am trying to find SEUS installer. It seemed like you can't download it through SE's website.
EDIT:
WTF?! I dunno there's another XPERIA Mini Pro which is NOT X10 Mini Pro. I flashed my X10 Mini Pro with the Xperia Mini Pro ROM Maybe that's why it's not booting anymore.
I tried reflashing it with the correct X10 Mini Pro (via PC Companion) ROM but still no effect. Maybe I messed up the phone big time? I will try SEUS if I can find one. I hope it works.
Click to expand...
Click to collapse
Looks like a hard brick in my opinion if you flashed the wrong phone's firmware I suggest you send the phone back to SE for repair.
pabling19 said:
I forgot to say that my LED is not working anymore (dunno why) I am trying to find SEUS installer. It seemed like you can't download it through SE's website.
EDIT:
WTF?! I dunno there's another XPERIA Mini Pro which is NOT X10 Mini Pro. I flashed my X10 Mini Pro with the Xperia Mini Pro ROM Maybe that's why it's not booting anymore.
I tried reflashing it with the correct X10 Mini Pro (via PC Companion) ROM but still no effect. Maybe I messed up the phone big time? I will try SEUS if I can find one. I hope it works.
Click to expand...
Click to collapse
You can get SEUS here
http://dl-www.sonyericsson.com/cws/download/1/110/61/1309763183/Update_Service_Setup-2.11.7.13.exe just see if it works
faiyyaz;17405774[QUOTE said:
]You can get SEUS here
http://dl-www.sonyericsson.com/cws/download/1/110/61/1309763183/Update_Service_Setup-2.11.7.13.exe just see if it works
Click to expand...
Click to collapse
Hi,
Thanks a lot for the link. I tried using it, still not working. I have a feeling that it really is hard bricked now. My next try will be using flashtool this time.
Edit:
Tried FlashTool, still dead. My phone needs an overhaul Too bad it's not under warranty anymore
try to unplug your batterie, wait ... plug the batterie, start into recovery ( clockmod ) and reflash with a new rom .
If your bootloader is lock, you cant brick your phone
How to rescue our bricked phone for x8 http://forum.xda-developers.com/showthread.php?t=1011071
PS: Are you sure you have the good firmware ?
In the post of doixant ( x8 ), you can see : Latest kernel and latest baseband xxx015
Another exemple : MiniCM7 for X10 mini ( not pro ) : Latest 2.1.1.A.0.6/2.1.1.C.0.0 SE firmware / Baseband: M76XX-TSNCJOLYM-53404015 due to kernel dependencies. This is automatically tested during the installation.
I guess, it's same for all custom rom
Sorry for my bad English
faiyyaz said:
PC companion is not good.. try flash with SEUS..!! Google it..u may find a download..
In order to restore a bricked mini pro:
-Launch SEUS (NOT PC Companion)
-When asked to plug the phone, press Home+Back (and keep them pressed) and then plug the phone on usb.
-Release Home and only keep the "back" button pressed.
If you followed the sequence properly, you will see the green led on and flashing process will start. If not, try it again.
Click to expand...
Click to collapse
I ve never press Home+Back , only back.
Sorry for double post
Edit :
pabling19 said:
Hi,
Thanks a lot for the link. I tried using it, still not working. I have a feeling that it really is hard bricked now. My next try will be using flashtool this time.
Edit:
Tried FlashTool, still dead. My phone needs an overhaul Too bad it's not under warranty anymore
Click to expand...
Click to collapse
Do you have already use Flashtool ?
If your are under Vista or Win 7, you must disable the UAC ( User Account Control ) for flashtool works. Search in google, I m french and i've found lots of pages, but in french.
Sorry if is useless, and for my bad English
pabling19 said:
faiyyaz;17405774
Hi said:
How is that the flash tool isnt workin?? Are u followin the steps properly..??
Well follow the 1st two instruction's here for flashtool of steps for installinng any ROM..
http://forum.xda-developers.com/showthread.php?p=16412835
Download flashtool n stock files.. See if it works.. N if on vista see wat spliff said..
Gintonic.SE by slade..
Click to expand...
Click to collapse
Click to expand...
Click to collapse
I don 't know if you must put your phone into debugg USB for flashtool works. Try
@OP
I'm sorry, but I really think your phone IS a hard brick now . I remember reading about a user that flashed a Galaxy S firmware onto his Galaxy S2, in the end he had to send his phone to the repair shop.
The same is probably true of your phone. I think you had better send it to the repair shop .
So here's the deal...i was following Patembe's guide on how to root my mini pro.
I flashed the 4.0.3 neo V firmware, got the black screen then bam...when i was about to start rooting with doomlord's toolkit i get stuck with the daemon started successfully part. I tried executing doomlord's app still there but it got to cleaning and killing and bla bla then it prompted me to try enabling usb debugging.
I think i forgot to turn it on? Because when i try to flash back to my 4.0.4 sk17i firmware using flashtool, it says there my usb debugging is off...with that said, i can't flash any other firmware because i'm using a neo V firmware with the black screen. I also think i'm on MTP. Damn can anybody help me? I hope there's still a solution to this. Thanks guys! Sorry for my bad english
Flashing firmwares doesn't need USB debugging. If you can't flash, repair with PC Companion.
Do you get in flashmode? Try to press volume down key and then plug the usb cable in the computer. If the green light shines, you can flash the gingerbread rom, cause I guess you tried to root ics.
Do it like its in this tutorial to root and repair your phone.
Have you got unlocked bootloader and have you only flashed kernel or the rest of rom, too?
Doomlord kit has issues getting blocked by antivir.have you disabled it before running the kit?(pressing ignore doesn't help)
Sent from my ST17i using xda app-developers app
Hi all,
sorry for starting new thread. But i have some strange problem on my Xperia x10 mini pro.
I was trying to install a custom rom on my xperia x10 mini pro. i've successively installed ICA kernel on my phone. then i've installed Mini CM7 gingerbread rom on my phone. but after successful completion my phone stuck at ica logo only. so i have flash again the kernal to its original xperia kernal with the help of flash tool.
but as i flash the kenel, my phone become dead. no restart, no light signal, no any sign of working. I have also tried to put the phone in charger about an hour but still i cant able to start the phone. Even my phone is not detected on pc in PC companion or SEUS.
how can i get back my phone? Kindly help me..
Thanks in advance!!!
hrdpgajjar said:
...
but after successful completion my phone stuck at ica logo only. so i have flash again the kernal to its original xperia kernal with the help of flash tool.
but as i flash the kenel, my phone become dead. no restart, no light signal, no any sign of working. I have also tried to put the phone in charger about an hour but still i cant able to start the phone. Even my phone is not detected on pc in PC companion or SEUS.
how can i get back my phone? Kindly help me..
...
Click to expand...
Click to collapse
Flashtool doesn't have the original xperia kernel. What you flashed is the bootloader relock kernel for the X10 (the huge one) not the X10 mini pro.
Only solution for you is a JTAG.
Secondly... What is the ICA kernel? Never heard of it.
What is JTAG and how can i use it to get my phone back...????
hrdpgajjar said:
What is JTAG and how can i use it to get my phone back...????
Click to expand...
Click to collapse
Did you solve the problem? Ihave the same... and no idea about waht to do!