Hi everyone,
I've got a retail, international Atrix (bought from Expansys) that came with Android 2.2.2. Now it is unlocked and I installed Cyanogenmod on it (therefore, Android 2.3.7).
I am located in Italy.
The Radio I installed is Orange France N_01.100.00R, that appears to be the best one for Intl. users with Gingerbread.
When I am on the home screen, is it normal to see the 3G icon becoming H and coming back to 3G within a couple of seconds?
When I use an application requiring Internet (e.g. Google Maps, Browser, ..), the icon switches to H and appears to stay in that state. When the application does not need the connection anymore (e.g. when the web page has been loaded), the icon flips back to 3G.
Is this a normal behavoir, or is this a Radio problem?
Yes it's normal for it to toggle between 3G & H, the H means high speed data connection, does it on my UK Orange Atrix all the time
Sent from my MB860 using xda premium
decker39 said:
Yes it's normal for it to toggle between 3G & H, the H means high speed data connection, does it on my UK Orange Atrix all the time
Sent from my MB860 using xda premium
Click to expand...
Click to collapse
Can you elaborate? I think I have OPs problem as well. The "toggling" is constant. Like every half second it will switch from 3g to h, while standing in the same area. Its not like a toggle that happens every 20 minutes as we move from one cell tower to another. You get that too?
Sent from my MB860 using xda premium
I meant the same thing, the bouncing randomly happens in an interval between about a half second and less than ten seconds
Diasable fast dormancy
Sent from my GT-I9100 using xda premium
andresalonika said:
Diasable fast dormancy
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
fast-what? where is this option located and what is it needed for?
disabling fast dormancy is easier said than done on the Atrix.. use titanium backup to freeze modemfastdormancy_____ i forgot the end of it.. lol but yea freeze it and reboot
Ok I disabled fast dormancy (adb logcat confirms that). What is it for?
Anyway, the 3G/H flipping has not completely stopped,but it is more rare. A big thanks to everybody!
bodom_lx said:
Ok I disabled fast dormancy (adb logcat confirms that). What is it for?
Anyway, the 3G/H flipping has not completely stopped,but it is more rare. A big thanks to everybody!
Click to expand...
Click to collapse
More than likely you are in a fringe coverage area. Really the only way that I can see you improving this issue even more is flashing a different radio to your phone, but that's not even a guarantee that it will truly fix things. It could also make things worse.
For what it is my phone switches from H to Edge in my own home at different points during the day. I've tried forcing my phone in 3G only, but all that did was drain my battery faster.
Bottom line - you could change the radio, or try to get used to it...
Sent from my MB860 using xda premium
Related
I was wondering if there was something I could download, or something from the market that i could download that would make my phone say H instead of 3G? My vibrant is not rooted.
I'm wondering why... but there won't be an app to do that. The G E and 3G icons are held in drawables. So unless you make your own update.zip with replaces drawables, I don't that's going to happen.
teedawgg said:
I was wondering if there was something I could download, or something from the market that i could download that would make my phone say H instead of 3G? My vibrant is not rooted.
Click to expand...
Click to collapse
Why do you want it to display that? The H is generally displayed when you're using HSPA/HSPA+. If you're connected t 3G it will say 3G. If you're connected to Edge, you'll get an E and if you're on the barebones cell network all you get is the number of bars you have.
kelmerp said:
Why do you want it to display that? The H is generally displayed when you're using HSPA/HSPA+. If you're connected t 3G it will say 3G. If you're connected to Edge, you'll get an E and if you're on the barebones cell network all you get is the number of bars you have.
Click to expand...
Click to collapse
I think he wants his phone to be like nexus one is, or other android phones are running custom roms, specifically cyanogen mod. With cm, it will jump from 3g to h icon quite often when data is used, does it to me in my area. I get hspa speeds here, but 3g is the only icon displayed. I like it this way more, the constant jump from 3g to hspa in notifications pane is annoying. Maybe he just wants people to see that his phone is on hspa and not 3g, because the icon doesn't change to that on stock rom.
I remember the first time my g1 said h... Had to call a buddy with a g1 and had to find an i*hone to make jealous...
Its worth bragging about...
Sent from my SGH-T959 using XDA App
afive720 said:
I think he wants his phone to be like nexus one is, or other android phones are running custom roms, specifically cyanogen mod. With cm, it will jump from 3g to h icon quite often when data is used, does it to me in my area. I get hspa speeds here, but 3g is the only icon displayed. I like it this way more, the constant jump from 3g to hspa in notifications pane is annoying. Maybe he just wants people to see that his phone is on hspa and not 3g, because the icon doesn't change to that on stock rom.
Click to expand...
Click to collapse
Not true. I have a stock rom on my Vibrant and it does toggle between 3g and hybrid. It just depends on whether or not you have the new radios broadcasting in your area. Some markets have a lot of hybrid running, while many others have little to none. One of my best friends is an RF tech for T-Mo.
Haha "H" doesn't stand for "Hybrid"
jnp1974 said:
Not true. I have a stock rom on my Vibrant and it does toggle between 3g and hybrid. It just depends on whether or not you have the new radios broadcasting in your area. Some markets have a lot of hybrid running, while many others have little to none. One of my best friends is an RF tech for T-Mo.
Click to expand...
Click to collapse
Sent from my SGH-T959 using XDA App
gravis86 said:
Haha "H" doesn't stand for "Hybrid"
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
No ****, Einstein! It stands for HSDPA, but ask any switch tech and he will tell you its hybrid. Right now in many markets, it is a true hybrid mix of HSDPA and 3g and not explicitly one or the other. Do some research before you criticize someone, retard!
Lol I'm cool too, see I'm posting from my vibrant!
Sent from my SGH-T959 using XDA App
I downloaded the user manual to the vibrant (not the one that comes in the box) and it definitely says that there is a 'H' icon. I wonder why they don't have it displayed when actually connected to a HSDPA+ connection?
This is the text next to the 'H' Icons:
Displays when the 3G+ network connection is active.
Displays when your phone is communicating with the
3G+ network.
What does it mean when there's just a G?
3G means 3G
E means EDGE
H means Hybrid/HSPA or whatever. I was out of town last weekend, and noticed that it was just a G.
GPRS, slooooow slooooow data speeds
Sent from my T-Mobile myTouch 3G Slide using XDA App
hurrpancakes said:
What does it mean when there's just a G?
3G means 3G
E means EDGE
H means Hybrid/HSPA or whatever. I was out of town last weekend, and noticed that it was just a G.
Click to expand...
Click to collapse
Grps I think it is called. Basically is faster than edge, but is still slow as ****, nit even close to 3g lol.
Gprs is a step below edge.
Sent from my Galaxy S using the XDA App
I read that our vibrant is not + capable, or just not supported by tmob currently.
Sent from my SGH-T959 using XDA App
I will look for some white icons and make a black bar with the H symbol
They are already in the phone...
Oh I figured they just left them out... I didn't look tho.. And haven't been to any good areas since I changed my bar... So I wouldn't see anything more than 3g...
Sent from my SGH-T959 using XDA App
jnp1974 said:
Not true. I have a stock rom on my Vibrant and it does toggle between 3g and hybrid. It just depends on whether or not you have the new radios broadcasting in your area. Some markets have a lot of hybrid running, while many others have little to none. One of my best friends is an RF tech for T-Mo.
Click to expand...
Click to collapse
Weird, because I get speeds which are way better than 3g, yet it never goes higher. My nexus with custom rom always displayed h in my area.
Sent from my SGH-T959 using XDA App
Well I got the pre release msguru radio and an h spot not too far from my house... I shall try to see the h today..
Sent from my SGH-T959 using XDA App
on my captivate i used to be able to set the network selection to use auto, 3G only and Edge. i dont see these options in wireless settings, i jsut see an option to select network. is there a way to set it to only use 3G?
No because the phone only shows either E for edge or H+ for 3G or HSDPA.
More than likely you could get an application from the market that lets you switch and see if that works, but.... what's wrong with the way it manages data now?
Sent from my Nexus One using XDA Premium App
Well lately ive noticed my H symbol flashing too 3g for a few seconds then back. Im on gingerblur and not sure if its the Rom or what, but its wierd. Has anyone with gingerblur seen the 3g symbol.
neotekz said:
on my captivate i used to be able to set the network selection to use auto, 3G only and Edge. i dont see these options in wireless settings, i jsut see an option to select network. is there a way to set it to only use 3G?
Click to expand...
Click to collapse
Newer phones are using "smart" radio management chips (or something like that). The newly released Thunderbolt is the same way. Which sucks because it was a good tool for battery management
it sometimes switches to edge and i wanted to force it to stay on 3G. my captivate would do the same thing and keeping it on 3G worked fine.
is there any hacks to add this setting?
JayRolla said:
Well lately ive noticed my H symbol flashing too 3g for a few seconds then back. Im on gingerblur and not sure if its the Rom or what, but its wierd. Has anyone with gingerblur seen the 3g symbol.
Click to expand...
Click to collapse
I have, I even did a sbf and installed just the theme, adeo and rooted and am getting this issue. Not sure what the deal is.
Sent from my MB860 using Tapatalk
neotekz said:
it sometimes switches to edge and i wanted to force it to stay on 3G. my captivate would do the same thing and keeping it on 3G worked fine.
is there any hacks to add this setting?
Click to expand...
Click to collapse
Lol it switches to edge because you don't have a 3G ssignal; what else is it supposed to do if you don't have it?
You can choose (for throat part) to go down but you can't just magically get a better/faster signal.
Sent from my Nexus One using XDA Premium App
FLAC Vest said:
Lol it switches to edge because you don't have a 3G ssignal; what else is it supposed to do if you don't have it?
You can choose (for throat part) to go down but you can't just magically get a better/faster signal.
Sent from my Nexus One using XDA Premium App
Click to expand...
Click to collapse
my captivate used to switch to edge too but when i locked it to 3G it never lost signal just gets weaker. seems like it switch prematurely when 3G is weak NOT totally gone.
*#*#4636#*#*
Phone options
Click the drop down menu and select network mode you want
thanks! what setting should i choose for 3G, gsm only or wcdma only?
neotekz said:
my captivate used to switch to edge too but when i locked it to 3G it never lost signal just gets weaker. seems like it switch prematurely when 3G is weak NOT totally gone.
Click to expand...
Click to collapse
That's all well and good, however if you completely lost 3G then it wouldn't be there, even if you have the setting locked.
Setting =\= Result
Sent from my Nexus One using XDA Premium App
FLAC Vest said:
That's all well and good, however if you completely lost 3G then it wouldn't be there, even if you have the setting locked.
Setting =\= Result
Sent from my Nexus One using XDA Premium App
Click to expand...
Click to collapse
i understand that it wont give me a better signal. but i use my cell in low reception area and dont want it to constantly switching to edge and back and kill my battery. like i said i've used the captivate with 3g only and never completely lost 3G even with the captivate's crappy radio.
Wcdma only
neotekz said:
i understand that it wont give me a better signal. but i use my cell in low reception area and dont want it to constantly switching to edge and back and kill my battery. like i said i've used the captivate with 3g only and never completely lost 3G even with the captivate's crappy radio.
Click to expand...
Click to collapse
Lol I think I should state this.
I understand what you're saying and I am not saying I think you're wring; on the contrary, I actually do that as well, however I move mine down to edge when I'm not going to be doing anything data intensive.
I was just stating what I said to inform people, just in case someone thought you could force 3G at ALL times, which isn't possible if you aren't getting 3G in your area.
Sent from my Nexus One using XDA Premium App
hondaguy said:
*#*#4636#*#*
Phone options
Click the drop down menu and select network mode you want
Click to expand...
Click to collapse
How do you make the selection stick? I tried a reboot and everything
Sent from my MB860 using XDA App
i think you have to redo the setting when you reboot.
Edit: i just notice that it also changes back when i plugged it in overnight. is there a way to keep this setting permanently?
I too am needing to set my phone to connect to Edge only. I have 1 bar at the house when my network type is HSDPA. When connected to HSDPA at the house, with one bar, I constantly get dropped calls or my phone may not ring at all. If the phone decides to connect to Edge, which has a full signal, then everything seems to be a-ok. Most of the time the phone completely disconnects from all networks when it switches from HSDPA to Edge... not cool.
I can not get this sucker to connect to Edge only via setting the preferred network type to WCDMA. The phone will automatically set itself to GSM/CDMA auto (PRL) if I manually try to set WCDMA as the preferred network.
Rather annoying to say the least. ATT is the only carrier that has a full signal at the house. That's the only reason I that I signed up with them.
yokozuna82 said:
How do you make the selection stick? I tried a reboot and everything
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
i just select the band i want and press the back key. usually the signal strength indicator will show no signal for a couple of seconds, then it will change to what i had selected. thats it
yokozuna82 said:
How do you make the selection stick? I tried a reboot and everything
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
xenorabbit said:
I too am needing to set my phone to connect to Edge only. I have 1 bar at the house when my network type is HSDPA. When connected to HSDPA at the house, with one bar, I constantly get dropped calls or my phone may not ring at all. If the phone decides to connect to Edge, which has a full signal, then everything seems to be a-ok. Most of the time the phone completely disconnects from all networks when it switches from HSDPA to Edge... not cool.
I can not get this sucker to connect to Edge only via setting the preferred network type to WCDMA. The phone will automatically set itself to GSM/CDMA auto (PRL) if I manually try to set WCDMA as the preferred network.
Rather annoying to say the least. ATT is the only carrier that has a full signal at the house. That's the only reason I that I signed up with them.
Click to expand...
Click to collapse
thats because wcdma is 3g only. you need to the GSM option, thats edge.
GSM=edge only
wcdma=3g only
GSM auto=3g or edge, phone decides depending on signal strength
Hi
Does anyone know how to fix this issue? I am in a good area for signal and with previous phones am consistently on H. With my S2 it frequently switches between 3G and H even if it stays in the same spot. It will do it every few minutes.
This is causing havok when I try and tether and my Transformer and laptop keep getting signal interruptions.
Does anyone have a fix? I have Fast Dormancy disabled and I'm aware there may be some other engineer menus that have signal settings in that might work?
Thanks
Paul
Sent from my Transformer TF101 using XDA Premium App
Interesting.. And I thought it was just my network vodafone
Mine also switches between G/H/H+ all within 5 secs... yeah 5 seconds and it is kinda annoying.
Are you on GIFFGAFF as stated on you profile? or other network? cause I thought if might have do to something with vodafone..
Otherwise may be its something to do with the hardware settings, I too would like to know the answer
I've kept mine to use WCMA all the times...
tfn said:
Interesting.. And I thought it was just my network vodafone
Mine also switches between G/H/H+ all within 5 secs... yeah 5 seconds and it is kinda annoying.
Are you on GIFFGAFF as stated on you profile? or other network? cause I thought if might have do to something with vodafone..
Otherwise may be its something to do with the hardware settings, I too would like to know the answer
Click to expand...
Click to collapse
Yes, I'm on giffgaff.
Glad its not just me. Maybe the antenna is a little too sensitive.
Anyone know the secret code to get to the GSM/UTMS bits?
Sent from my Transformer TF101 using XDA Premium App
TheMathMan said:
Yes, I'm on giffgaff.
Glad its not just me. Maybe the antenna is a little too sensitive.
Anyone know the secret code to get to the GSM/UTMS bits?
Sent from my Transformer TF101 using XDA Premium App
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1069015
This thread has lots of codes, if any help i have no clue which might help us
OK. Found the 2263 code but that seems to want to enable/disable actual bands.
Am I looking into it too hard!?
Sent from my Transformer TF101 using XDA Premium App
hazem77 said:
I've kept mine to use WCMA all the times...
Click to expand...
Click to collapse
Now, for me wouldn't 3G and H/H+ both be considered as WCDMA under Mobile Network Settings? G and E would be GSM right?
If that is the case, staying on WCDMA wouldn't fix the problem.
Sent from my Transformer TF101 using XDA Premium App
Your phone shouldn't lock onto a H/H+ signal unless it has started to download data. That's how the protocol works.
If your phone is sitting idle it should be on 3G.
You should only get H/H+ when your phone is actively downloading.
Your phone shouldn't lock onto a H/H+ signal unless it has started to download data. That's how the protocol works.
If your phone is sitting idle it should be on 3G.
You should only get H/H+ when your phone is actively downloading.
Click to expand...
Click to collapse
OK. So how can I stop it flicking between the H and 3G. For instance when I am trying to stream it will get interrupted, or if I'm wirelessly tethered?
Sent from my Transformer TF101 using XDA Premium App
i'm from tunisia and have the same pronlem here.
Please developers help us to get rid of this 3g/h issue.
Guys,
I got the same problem here i n Brazil using a VIVO carrier.
I set in CONFIG -> WIRELESS AND NETWORK -> MOBILE NETWORKS -> NETWORK MODE -> WCDMA ONLY
I don`t know why it worked but now its working fine.
Could you test?
Rgds
Flavio
No problems to report in Amsterdam.
I'm biking through the whole city to get to work, no disconnects using TuneIn or Google Music. Provider is Vodafone, HSDPA+ all along the way.
Its Android issue
Think when iPhone, Windows phones have not had this issue, wat else other than Android. I have tried 3 different handsets. 3 different network - 3, O2 and Vodaphone. All has same problem. Android is the only thing common. I have been scouring the internet and posted everwhere possible since Dec 2010 from when I became Android user. There is no solution. Everone seems busy making their own Android versions and apps. Result there is no basic data and voice stability on Android. Have been relying on my decade old treo to receive n make important calls. Wonder where this is going. My heart n soul seems to sway to the iPhone lately. Atleast wat they give works well.
Its Android issue
BTW those config settings are useless too. I have even used the code to get into hidden menu and change config but no use. It's the same issue. From H to 3g and from G to E I gsm.
Sorry for the question, but whats the problem with switching? I have the same thing but is not a problem for me.
Sent from my GT-I9100 using XDA App
Nobody should get worried about that switching, THIS IS NORMAL!
H/H+ is an high speed 3G protocol.
Basically:
1. 3G means DL 384 Kbps tops. The modem is under 3G signal most of the time. Whenever something on your phone starts checking/d-loading it communicates at THE BEGINNING under 3G protocol. Also, long ping time> 210 ms.
2. HSDPA max 14 Mbps/HSDPA+ can go as high as 42 Mbps ( topped only by cell tower). If there's need for large packet data or shorter ping time, IT AUTOMATICALLY SWITCHES TO H/H+(IF AVAIL). Hsdpa consumes more power and it's a communication protocol. When connected under H/H+ error correction bits are transmitted along data stream. It's like switching your home wifi on b/g/n. ...or like the automatic gearbox going to overdrive.
If you see a lot of this switching it means there's a lot of downloading/uploading going on.
I have it switching too between 3g and h on o2 and its making the internet so unstable you cannot do anything at all. This is certain not normal as the switch happens every second and continues to do so until phone is off
Mine is also switching to 3G once connection is idle for about 3 seconds. So far no problem and it uses less power than my SGS1 for browsing since my SGS1 doesn't switch to 3G when idle.
Mine is no problem between this signal switching, check your area or check your country maybe too much communication devices there so that's why it is distorted. Just use the common carrier with plenty of cell sites for a good signal of your phone.
What do i need to dial to fix it to 3g only from 2g?
Does anyone else have this problem or is this normal?
Sent from my SGH-I777 using xda premium
it will only change to H+ when it is using data (depending on what ROM you are on). this is a feature that saves battery. If it keeps changing, your phone may be using data for apps or whatever.
Are you on the Stock gingerbread that came with the phone? need a little more info to really see if anything is wrong.
It will do this if you have background data and auto sync checked in your settings. Others will chime in and ask if your completely stock or what rom and kernel you're running.
Sent from my SAMSUNG-SGH-I777 using xda premium
From what I have read, correct me if I'm wrong, this is due to custom ICS ROMs reporting you're data connection directly whereas stock GB wouldn't update as frequently.
Clay
Sent from my SGH-I777 using XDA
I have seen this with all rome that i have used, stock kk6, also i have tried aokp and mystic rom as well as shostock which i'm running now. It does not seem to have any effect on the data performance but i'm just curious if this is something anyone has seen before with this phone. I am on straight talk though if that means anything however I do have an iPhone which i use also so that phone displays 4g at all times.
Question has been answered in a post above. It changes when data is being transferred.
personally i think it uses the h+ to get data faster then drops to 3g to maintain also saves battery like they said its nothing to worry about its normal
mrdead72 said:
personally i think it uses the h+ to get data faster then drops to 3g to maintain also saves battery like they said its nothing to worry about its normal
Click to expand...
Click to collapse
It is a battery thing but it will never use 3g for data unless there is no 4g network around. If our phones were on 4g all the time our battery would be dead in no time so it drops to 3g when its idle.
The actual ATTs roms keep the 4g symbol on constantly probably for marketing reasons. The switching between 3g/4g is how a rom really works, ATT just decided to hide it so they can look cooler with the "always on 4g" thing. That's my guess anyways.
Sent from my SAMSUNG-SGH-I777 using Tapatalk
What? For saving battery?
Wouldnt that double the use of battery power because the radio keeps switching from 3G to H+? correct me if im wrong because i thought staying at a constant Connection(IE:3G or EDGE) would be better on battery instead of it switching constantly
saw this link and i took in consideration that the tip for locking onto 3G would help
http://forum.xda-developers.com/showthread.php?t=1234264
Asit says in the title.This constant change between the two network types causes data to be slow and timeout quite a lot as well as drain battery. Even watching low quality youtube videos is impossible because of the switching. I'm on the current CM10.1 build right now. Is there anyway I can just stick to one network type instead of it switching every second? I've tried going into phone information and set it to gsm only, wcdma preferred, etc. But it also just goes back to gsm auto (prl). And finally the weird thing is that there will be moments of time where data can be consistent (for like 5 minutes) and then it'll revert back to being slow.
Ive read in older posts (early 2012) that going to build.prop and changing ro.ril.hsxpa or somethinf like that helps. I can't find that so I'm wondering if theres another way to keep it at UMTS or HSDPA and NOT have it switch.
I'm on the Wind Mobile Network right now with baseband 1.15 if that helps. (I'm also a noob who can just flash stuff and new to this phone so go essy on me ^_^)
They are the same network. The phone just switches from hsdpa to umts when data is not in use to save battery. But hsdpa+ is just a higher speed version of umts, just like edge is a higher speed form of gprs. So That is not what is causing the time outs. It's probably just had network where you are. Mine switches between umts and hsdpa+ all the time, and my connection never times out.
Sent from my GT-N8013 using xda app-developers app
masondoctorjt said:
They are the same network. The phone just switches from hsdpa to umts when data is not in use to save battery. Buot hsdpa+ is just a higher speed version of umts, just like edge is a higher speed form of gprs. So That is not what is causing the time outs. It's probably just had network where you are. Mine switches between umts and hsdpa+ all the time, and my connection never times out.
Sent from my GT-N8013 using xda app-developers app
Click to expand...
Click to collapse
Yes I know they're supposed to switch but that's the thing; even in standby it keeps switching constantly almost every other second causing battery drain. And the reasn why I'd prefer just hsdpa is that data is consistent on it whereas umts just times out on me almost everytime or rather when the two switch. Is this just a network issue?
I think it is just a network issue, as with tmobile as soon as the phone calls for data, it goes to hspa and there is not lag when it switches.
Sent from my GT-N8013 using xda app-developers app
masondoctorjt said:
I think it is just a network issue, as with tmobile as soon as the phone calls for data, it goes to hspa and there is not lag when it switches.
Sent from my GT-N8013 using xda app-developers app
Click to expand...
Click to collapse
I tried everything I can and data is still inconsistent. I'll try testing out different baseband versions to see if that does something but unfortunately, it could be a hardware issue with the radio :/ Thanks for the help.
CaffeineGiant said:
I tried everything I can and data is still inconsistent. I'll try testing out different baseband versions to see if that does something but unfortunately, it could be a hardware issue with the radio :/ Thanks for the help.
Click to expand...
Click to collapse
Hey CaffeineGiant, did you try the latest OTA radio.zip? Someone named jordin posted it in a bunch of threads a while back. If you rename it to PH85IMG it could flash in bootloader and help!
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
SuperAfnan said:
Hey CaffeineGiant, did you try the latest OTA radio.zip? Someone named jordin posted it in a bunch of threads a while back. If you rename it to PH85IMG it could flash in bootloader and help!
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Are you talking about the 1.15 version, cuz I've already done that and the problem persists.
Quick question, I've opened up BetterBatteryStats and over a course of 7 1/2 hours idle, under partial wakelocks, google checkin service has had 967 counts, alarm manager 723 and a couple days ago RILJ and sdio dmux were up there. The difference between then and now is that I've had wifi. Is that anyway related? I don't wanna give up hope on this phone because I like it despite its poor battery life and this radio
CaffeineGiant said:
Are you talking about the 1.15 version, cuz I've already done that and the problem persists.
Quick question, I've opened up BetterBatteryStats and over a course of 7 1/2 hours idle, under partial wakelocks, google checkin service has had 967 counts, alarm manager 723 and a couple days ago RILJ and sdio dmux were up there. The difference between then and now is that I've had wifi. Is that anyway related? I don't wanna give up hope on this phone because I like it despite its poor battery life and this radio
Click to expand...
Click to collapse
I think you should download Greenify and hibernate your apps. That saves tons of battery. It looks like you're getting wakelocks which are causing the drain.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app