hi i have a samsung galaxy 5 GT-I5503 , i have flashed cyanogenmod 1.7.1 as mentioned in development forums but now my phone wont start up. it is stuck in boot loop at samsung logo ...waited for like an hour but still wont work.....any sugggestion guyz?
yugant003 said:
hi i have a samsung galaxy 5 GT-I5503 , i have flashed cyanogenmod 1.7.1 as mentioned in development forums but now my phone wont start up. it is stuck in boot loop at samsung logo ...waited for like an hour but still wont work.....any sugggestion guyz?
Click to expand...
Click to collapse
Did you match the base band?
try re flashing clock work recovery via odin and match the base band and try flashing cyanogen
Also data wipe
Sent from my GT-I5500 using Tapatalk
thanks ,,,,i installed baseband and it works....finally installed cyanogenmod 7.1 successfully
Bootloop is baseband issue!!
I installed the CLEANROM rom on my I5503 via ODIN, was stuck in bootloop (boots to android written in letter then restarts). I then flashed the I5503JXJP5 baseband from the the baseband page at madteam.co and voila!! I didnt even have to use CWM to reinstall the rom the phone booted straight into android! No hussle!
Related
i am having galaxy ace s5830i and it had stock gb and it was not rooted. but i booted it into stock recovery ie android recovery system and flashed cm beta 7 rom
.. and after that flashing completed it said device is ready to use, installation successfull and after that when i rebooted it just got hung on start up logo.....
i tried to boot it in download mode but its not getting in download mode and when tried to boot in android recovery its booting up
i again tried to flash stock gb but installation aborts... and when again flashed cm beta 7 its successfull......
plz help me get out if this..........
Try volume up and power, basically every button combo you can till it gets into download mode (I think it's different on the 5830i.
99% of roms on this forum are for the 5830 only :/
Sent from my GT-S5830 using XDA
saffu said:
i am having galaxy ace s5830i and it had stock gb and it was not rooted. but i booted it into stock recovery ie android recovery system and flashed cm beta 7 rom
.. and after that flashing completed it said device is ready to use, installation successfull and after that when i rebooted it just got hung on start up logo.....
i tried to boot it in download mode but its not getting in download mode and when tried to boot in android recovery its booting up
i again tried to flash stock gb but installation aborts... and when again flashed cm beta 7 its successfull......
plz help me get out if this..........
Click to expand...
Click to collapse
But u CANT flash roms via stock recovery u need cwm recovery
you know you are rooted when you use XDA more than FB
u misunderstood that all methods and roms in s5830 are NOT for s5830i
here is the problem
i can still access my CWM
i do have android galaxy 5 with 2.1 VERSION
then i update my rom to Cyanogen :3
but it just keep on BootLoooping after android letters shows up it will restart
please help
i follow this thread
http://forum.xda-developers.com/showthread.php?t=1416190
i know its perfect but whats happening to my phone?
iamxxii said:
here is the problem
i can still access my CWM
i do have android galaxy 5 with 2.1 VERSION
then i update my rom to Cyanogen :3
but it just keep on BootLoooping after android letters shows up it will restart
please help
i follow this thread
http://forum.xda-developers.com/showthread.php?t=1416190
i know its perfect but whats happening to my phone?
Click to expand...
Click to collapse
you can still access CMW,
reboot onto recovery do dataWipe, dalvick cache, and flash again with another update,
If you had 2.1 you have to upgrade to 2.2 first then to Cyanogenmod as 2.1 could cause problems like bootloop, no 3g ...
Dear members,
I have been installing and using custom roms on my i9300 (32gb) for over a year now. just a few days ago, i installed a stock rom through odin after encountering a problem with wifi from one of the custom roms. The stock rom i installed is;
Version: 4.1.2
Baseband: i9300UBEMH1
BUILD: JZO54K.I9300UBEMH2
phone became smooth again with wifi problem resolved. however one problem arised..now i cannot install any custom rom. i tried rooting thorugh cf-root and installing recovery through odin n all other methods including the s3 toolkit. the root on aforementioned rom works absolutely fine but as soon as i try installing a custom rom through twrp or cwm, the system shows no error while installing but as soon as recovery reboots,the phone gets stuck on samsung logo.
please help!!!
Using latest philz recovery, wipe for new rom then format internal sd card. Install firmware then leave first boot for at least 5 minutes.
If it still doesn't work then check efs partition, possibly downgrade boot loader.
Sent from my GT-I9300 using Tapatalk
boomboomer said:
Using latest philz recovery, wipe for new rom then format internal sd card. Install firmware then leave first boot for at least 5 minutes.
If it still doesn't work then check efs partition, possibly downgrade boot loader.
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
ok i will check the philz recovery...plus there is no boot loop of rom stuck on boot logo..the phone gets stuck on the "Samsung galaxy siii" logo and does not proceed.
i would greatly appreciate if u can guide me or point me to the thread for downgrading bootloader...i think its the bootloader issue.
c4capricorn said:
ok i will check the philz recovery...plus there is no boot loop of rom stuck on boot logo..the phone gets stuck on the "Samsung galaxy siii" logo and does not proceed.
i would greatly appreciate if u can guide me or point me to the thread for downgrading bootloader...i think its the bootloader issue.
Click to expand...
Click to collapse
u could try another kernel like http://forum.xda-developers.com/showthread.php?t=2528624 and watch if the Devil kernel logo came or only the samsung logo.
to me its something of a partition problem..experts please share your view...
anyone???
Hi!
On start - sorry for my bad ENG
So..
I have i9300 (international, Poland) and it was installed branded PLUS GSM android 4.0.4
I want to install a Cyanogenmod 11.. and i brick it.. Any of cyanogenmod wont boot up...
CWM is 6.0.4.7 non toutched, I try install on this CM 10.2, CM 11, Omni-4.3.3 but nothing happend, worst - when i install STOCK ROM from samsung-update or sammobile, i download about 6 roms from there and nothing happend.. stuck on loading logo (loop), yes - i wiped after that over and over again but its not working...
(with my friend we tryed to install NEATEROM but the same thing.. loop )
Its one (almost) good thing... i thing is wrong kernel..
When i installed "cm-11-20140612-NIGHTLY-i9300" and after that WITHOUT WIPING! "PSN_AGNi_pureSTOCK-v4.3_Ported-4.4.2_I9300_AROMA-signed", samsung started...
Phone boot up, seems work but on start is error "
Unfortunately the process com.android.phone has stopped" ITS ONLY ROM WITH PHONE (seems to be) WORK
oh and my binary counts have number: 4, is this problem ? I cant reset this..
Help Please
Sorry again for bad ENG friends..
Thanks
here is vid how that rom working and installing
/watch?v=eae1y7JvIeM&feature=youtu.be
Try flashing 4.4 rom
Sent from my SM-N9005 using XDA Free mobile app
do you a full wipe every rom you try to flash ,it doesn;t work like that ,and search in forum there's a guide how to flash ,at least can you enter in recovey mode or download mode now ?
If you want to remove binary count search for triangle away
ok i will try flash to 4.4 but wait please a few minutes, i just uploading vid on youtube to show you all that "working" rom, i know how installing roms but its dont work, i know how to wpie and when do it bus seorusliy it not work...
and to use triangle away my phone must working, and thats problem.. i will show you that on vid just wait
and yes ofcourse i can enter in download mode and in cwm, just i say its only one rom with can boot.. stock and other roms stuck on sign "samsung i9300" stock roms stops at samsung logo and one of cyanogenmod starts up almost normal (u see what is wrong in vid) and is error with com.android.phone
VID is avalibe in first post
try to redownload zip file and try again ...maybe it should work . Happens to me once the same error ,i just rebooted in recovery mode ,did a wipe dalvik cache/ cache a factory reset and all went fine .
also you can try this https://www.youtube.com/watch?v=1iCq7fSqIqk (read the comments also)
switelolo124 said:
Hi!
On start - sorry for my bad ENG
So..
I have i9300 (international, Poland) and it was installed branded PLUS GSM android 4.0.4
I want to install a Cyanogenmod 11.. and i brick it.. Any of cyanogenmod wont boot up...
CWM is 6.0.4.7 non toutched, I try install on this CM 10.2, CM 11, Omni-4.3.3 but nothing happend, worst - when i install STOCK ROM from samsung-update or sammobile, i download about 6 roms from there and nothing happend.. stuck on loading logo (loop), yes - i wiped after that over and over again but its not working...
(with my friend we tryed to install NEATEROM but the same thing.. loop )
Its one (almost) good thing... i thing is wrong kernel..
When i installed "cm-11-20140612-NIGHTLY-i9300" and after that WITHOUT WIPING! "PSN_AGNi_pureSTOCK-v4.3_Ported-4.4.2_I9300_AROMA-signed", samsung started...
Phone boot up, seems work but on start is error "
Unfortunately the process com.android.phone has stopped" ITS ONLY ROM WITH PHONE (seems to be) WORK
oh and my binary counts have number: 4, is this problem ? I cant reset this..
Help Please
Sorry again for bad ENG friends..
Thanks
here is vid how that rom working and installing
/watch?v=eae1y7JvIeM&feature=youtu.be
Click to expand...
Click to collapse
You can download this ROM. It is 4.3 for Poland (Plus)
Please read the guides on how to flash properly. If you flash the wrong way, then you can end in trouble.
did this Rom has kernel inside ?
and guys... i KNOW HOW INSTALLING ROM, i just write like that to make it shorter
@edit
not working i told u guys its not working only cm11 without wiping plus stock aroma rom kinda working...
did is some way to installing firmware with odin but emerygency mode ? i doing that in galaxy s2 mini but i know its diffrend samsung.. but maybe.. ?
Did u try flashing rom without sd card ??
Sent from my SM-N9005 using XDA Free mobile app
Hello all, I recently had a problem with my Samsung Galaxy S2 GT-I9100, I installed CM11 on it, but It had some bugs, and I bought Galaxy Alpha, so I wanted to give it to my mother, but since she is used to TouchWiz phones, I installed 4.1.2 JB ROM, but device is stuck on boot loop because flash failed? I want to get into recovery, but I have a bit of problem..... , I dropped my phone 4 weeks before this happened, and I replaced shattered screen, but unfortunately I lost power button, and that metal plate is destroyed by pencil I used to lock the device, now I can't boot into recovery, tired combo with download mode reset and vol up + home button, nothing, just samsung logo and boot loop continues, so I tried with adb, but devices recovery is not supported, because I flashed CMR 6.0.5 (that is newest version for GT-I9100) but black screen on boot appeared, so I finally flashed stock rom for the last time 5 hrs ago and nothing, evrything is stock and chache memory also dalvik chache is not deleted, so how can I delete that so I can finally turn device on and set it up? Im not pro\ with Android, just enthusiast so I am mad on myself for doing that, I do not want to waste working device, just how can I delete chache, or can I even fix the phone??
Hi
Thanks for writing to us at XDA Assist. Please standby while we have your thread/question moved to the appropriate sub-forum for your device.
For future reference you can find your device sub-forum here (bookmark/subscribe this):
Samsung Galaxy S II I9100
Within that section you will find a dedicated q&a sub-forum (this is where your thread is going to be moved to):
Galaxy S II Q&A, Help & Troubleshooting
Good luck!
Vuxa said:
Hello all, I recently had a problem with my Samsung Galaxy S2 GT-I9100, I installed CM11 on it, but It had some bugs, and I bought Galaxy Alpha, so I wanted to give it to my mother, but since she is used to TouchWiz phones, I installed 4.1.2 JB ROM, but device is stuck on boot loop because flash failed? I want to get into recovery, but I have a bit of problem..... , I dropped my phone 4 weeks before this happened, and I replaced shattered screen, but unfortunately I lost power button, and that metal plate is destroyed by pencil I used to lock the device, now I can't boot into recovery, tired combo with download mode reset and vol up + home button, nothing, just samsung logo and boot loop continues, so I tried with adb, but devices recovery is not supported, because I flashed CMR 6.0.5 (that is newest version for GT-I9100) but black screen on boot appeared, so I finally flashed stock rom for the last time 5 hrs ago and nothing, evrything is stock and chache memory also dalvik chache is not deleted, so how can I delete that so I can finally turn device on and set it up? Im not pro\ with Android, just enthusiast so I am mad on myself for doing that, I do not want to waste working device, just how can I delete chache, or can I even fix the phone??
Click to expand...
Click to collapse
You will have to flash a kernel or recovery that is compatible with stock 4.1.2. Use apolo kernel 4.15 or dorimanx 8.44 v004 and see if it boots up. Look at my create kernel tar from zip guide for pre-made odin kernels.
gsstudios said:
You will have to flash a kernel or recovery that is compatible with stock 4.1.2. Use apolo kernel 4.15 or dorimanx 8.44 v004 and see if it boots up. Look at my create kernel tar from zip guide for pre-made odin kernels.
Click to expand...
Click to collapse
So can you please send me link for apolo kernel for gt-i9100, if possible? Thanks fwd.
Vuxa said:
So can you please send me link for apolo kernel for gt-i9100, if possible? Thanks fwd.
Click to expand...
Click to collapse
Here is the odin kernel for apolo kernel: https://drive.google.com/folderview...&usp=sharing&tid=0B3ApZsjOd2bzRk5zc19RVnI3c0k