here is the problem
i can still access my CWM
i do have android galaxy 5 with 2.1 VERSION
then i update my rom to Cyanogen :3
but it just keep on BootLoooping after android letters shows up it will restart
please help
i follow this thread
http://forum.xda-developers.com/showthread.php?t=1416190
i know its perfect but whats happening to my phone?
iamxxii said:
here is the problem
i can still access my CWM
i do have android galaxy 5 with 2.1 VERSION
then i update my rom to Cyanogen :3
but it just keep on BootLoooping after android letters shows up it will restart
please help
i follow this thread
http://forum.xda-developers.com/showthread.php?t=1416190
i know its perfect but whats happening to my phone?
Click to expand...
Click to collapse
you can still access CMW,
reboot onto recovery do dataWipe, dalvick cache, and flash again with another update,
If you had 2.1 you have to upgrade to 2.2 first then to Cyanogenmod as 2.1 could cause problems like bootloop, no 3g ...
Related
hi i have a samsung galaxy 5 GT-I5503 , i have flashed cyanogenmod 1.7.1 as mentioned in development forums but now my phone wont start up. it is stuck in boot loop at samsung logo ...waited for like an hour but still wont work.....any sugggestion guyz?
yugant003 said:
hi i have a samsung galaxy 5 GT-I5503 , i have flashed cyanogenmod 1.7.1 as mentioned in development forums but now my phone wont start up. it is stuck in boot loop at samsung logo ...waited for like an hour but still wont work.....any sugggestion guyz?
Click to expand...
Click to collapse
Did you match the base band?
try re flashing clock work recovery via odin and match the base band and try flashing cyanogen
Also data wipe
Sent from my GT-I5500 using Tapatalk
thanks ,,,,i installed baseband and it works....finally installed cyanogenmod 7.1 successfully
Bootloop is baseband issue!!
I installed the CLEANROM rom on my I5503 via ODIN, was stuck in bootloop (boots to android written in letter then restarts). I then flashed the I5503JXJP5 baseband from the the baseband page at madteam.co and voila!! I didnt even have to use CWM to reinstall the rom the phone booted straight into android! No hussle!
Greetings,
dear all,
in the process of updating to jelly been from the ginger bread os i installed the cwm 5.x.x version and rooted after that i took complete backup then i have installed the jellybeen with doomnex rom or somthing once it is installed after restarting the deivce it started recovery loop and was getting the error e:drive/cache can't mount so then i tried to restore then also same message i tried and found latest cwm ver 6.x.x untouch installed over it thats it it is completely in unworakble condition options ar showing but no option can be selected just moving ther cursor up and down i cant enter any option neither booting
so kindly help me how can i fix this problem to restore to working state
waiting for your kind favour
thanks
If you are in Recovery - Loop, I think you have to flash a new Bootloader. Instructions and Files
Hi!
On start - sorry for my bad ENG
So..
I have i9300 (international, Poland) and it was installed branded PLUS GSM android 4.0.4
I want to install a Cyanogenmod 11.. and i brick it.. Any of cyanogenmod wont boot up...
CWM is 6.0.4.7 non toutched, I try install on this CM 10.2, CM 11, Omni-4.3.3 but nothing happend, worst - when i install STOCK ROM from samsung-update or sammobile, i download about 6 roms from there and nothing happend.. stuck on loading logo (loop), yes - i wiped after that over and over again but its not working...
(with my friend we tryed to install NEATEROM but the same thing.. loop )
Its one (almost) good thing... i thing is wrong kernel..
When i installed "cm-11-20140612-NIGHTLY-i9300" and after that WITHOUT WIPING! "PSN_AGNi_pureSTOCK-v4.3_Ported-4.4.2_I9300_AROMA-signed", samsung started...
Phone boot up, seems work but on start is error "
Unfortunately the process com.android.phone has stopped" ITS ONLY ROM WITH PHONE (seems to be) WORK
oh and my binary counts have number: 4, is this problem ? I cant reset this..
Help Please
Sorry again for bad ENG friends..
Thanks
here is vid how that rom working and installing
/watch?v=eae1y7JvIeM&feature=youtu.be
Try flashing 4.4 rom
Sent from my SM-N9005 using XDA Free mobile app
do you a full wipe every rom you try to flash ,it doesn;t work like that ,and search in forum there's a guide how to flash ,at least can you enter in recovey mode or download mode now ?
If you want to remove binary count search for triangle away
ok i will try flash to 4.4 but wait please a few minutes, i just uploading vid on youtube to show you all that "working" rom, i know how installing roms but its dont work, i know how to wpie and when do it bus seorusliy it not work...
and to use triangle away my phone must working, and thats problem.. i will show you that on vid just wait
and yes ofcourse i can enter in download mode and in cwm, just i say its only one rom with can boot.. stock and other roms stuck on sign "samsung i9300" stock roms stops at samsung logo and one of cyanogenmod starts up almost normal (u see what is wrong in vid) and is error with com.android.phone
VID is avalibe in first post
try to redownload zip file and try again ...maybe it should work . Happens to me once the same error ,i just rebooted in recovery mode ,did a wipe dalvik cache/ cache a factory reset and all went fine .
also you can try this https://www.youtube.com/watch?v=1iCq7fSqIqk (read the comments also)
switelolo124 said:
Hi!
On start - sorry for my bad ENG
So..
I have i9300 (international, Poland) and it was installed branded PLUS GSM android 4.0.4
I want to install a Cyanogenmod 11.. and i brick it.. Any of cyanogenmod wont boot up...
CWM is 6.0.4.7 non toutched, I try install on this CM 10.2, CM 11, Omni-4.3.3 but nothing happend, worst - when i install STOCK ROM from samsung-update or sammobile, i download about 6 roms from there and nothing happend.. stuck on loading logo (loop), yes - i wiped after that over and over again but its not working...
(with my friend we tryed to install NEATEROM but the same thing.. loop )
Its one (almost) good thing... i thing is wrong kernel..
When i installed "cm-11-20140612-NIGHTLY-i9300" and after that WITHOUT WIPING! "PSN_AGNi_pureSTOCK-v4.3_Ported-4.4.2_I9300_AROMA-signed", samsung started...
Phone boot up, seems work but on start is error "
Unfortunately the process com.android.phone has stopped" ITS ONLY ROM WITH PHONE (seems to be) WORK
oh and my binary counts have number: 4, is this problem ? I cant reset this..
Help Please
Sorry again for bad ENG friends..
Thanks
here is vid how that rom working and installing
/watch?v=eae1y7JvIeM&feature=youtu.be
Click to expand...
Click to collapse
You can download this ROM. It is 4.3 for Poland (Plus)
Please read the guides on how to flash properly. If you flash the wrong way, then you can end in trouble.
did this Rom has kernel inside ?
and guys... i KNOW HOW INSTALLING ROM, i just write like that to make it shorter
@edit
not working i told u guys its not working only cm11 without wiping plus stock aroma rom kinda working...
did is some way to installing firmware with odin but emerygency mode ? i doing that in galaxy s2 mini but i know its diffrend samsung.. but maybe.. ?
Did u try flashing rom without sd card ??
Sent from my SM-N9005 using XDA Free mobile app
Hello,
I have SGS3 i9300 that was installed on it Cyanogenmod 11 for along time and it working great!!
until i did some mistake because i have a problem with the power button and i thought it was the CM that cause this resets.... but now it's too late/
i fix the problem and tried to install CM11 back, but the phone showing black screen after the Samasung s3 logo... and nothing.
the steps that i try is:
1. install recover CWM and install ROMs.
2. install recover TWRP and install ROMs.
3. install Stock Rom from Odin.
4. install CM10 snapshot or CM11 nightly.
5. binary code reset.
6. install throw CM windows installer.
7. install BlissPop.
none of the above works :crying:
the only ROM that i manage to install where "Android Revolution HD 29.0"
PLEASE HELP ME....
thanks
were you running a custom kernel also?
Phantogenic said:
were you running a custom kernel also?
Click to expand...
Click to collapse
i don't know
but i do install Stock Rom
Does it not change to the Stock Kernel?
UP
up please i still get my phone work
i recently install stock rom 4.0.2
and this work but when i do upgrade with Kies or even Odin to new version
i get this problem with the black screen immediately after the Smasung S3 logo :crying:
please help
hello all,
i had the orignal samsung ver 4.0.4 on my samsung tab 10.1 rom P7500xxlq8.i wanted to upgarde to marshmallow so download odin3 1.85v and the rom for marshmallo. I entered in downloading mode and connected vai odin3 and got errors. then rooted the tab sucessfully with the following method https://forum.xda-developers.com/showthread.php?t=2361571 .after that i put the marshamallom in the root sd-card and went in download mode did the wipe cache /dalvik and not the next I know i am stuck with my tab booting in a loop to TWRP 2.2.0 .
Please can someone tell me the best way to get this started.Also stupid of me did not backup my rom before rooting.Would really appreciate it if anyone can tell me step by step as i am new to this.
thanks again
re boot loop
hi again,
finally i got the orignal stock rom europe and flash it with odin method. Son now my tab is back to square one .This time i root the tab again with twrp and with superSU and also taken backup of the rom.
So now i have 4.0.4 ics rooted with twrp 2.2.0, now how do i update to marshmallow from here and which methods to use.also need to know how to update twrp 2.2.0 to 2.7.8.0 so i can flash marshmallow 6.0.1. ohh forgot to mention mine is a 3g tab can i enable voice callin too.
thanks again.
looking for a favourable reply struggled for 3-4days and still at point A
Hi, could you please give a link where you got the stock rom from?