Hi,
In another Forum I was recommended to ask for help here:
after successful flashing boot my new FG8 no longer the flash process went smoothly, booted, then did the another SD inserting card, I turned off,new SD card in, and since then I can press days and after the power button, nothing happens at all. Battery is charged.
The instructions I found in English ( china-iphone.ru) (cca page 70 onwards)the correct firmware for me was from March.
What can be done except throw out there? Is there any code in the buttons (or squeezing etc etc.) I would be grateful for any ideas ...
Actually the whole thing was due to GPS bug (which has twice the speed shown) which was also resolved, but I can test no more ..
I remembered that did not do factory reset. In google I found the manual from HTC Desiree, (First Volume Down button simultaneously then one-off button) Unfortunately for the Chinese scrap is only one times black and white strip down, but only so long until I hold down the Eischaltknopf.
If the device is left to save?
I look forward to each answer. The phone fg8 can be admired in Youtube.
Sorry for my English...
Thanks in advance
It means, NO HOPE , thx I understand.
I have the same issue :-( any updates? My phone has been working fine for months and suddenly stop responding to power button. (took battery put in ... no help)
please help!!!
Did you do a factory reset?
Related
Hi all
I have a Lobster 700tv phone which I think is brilliant, but I'm looking to upgrade the software from mobile 5 to mobile 6. I have windows xp on my pc is this possible?
The reason I'm asking is that my phone is somehow stuck in headset mode (even without the headset plugged in) and I can't figure out on how to get it back to normal. Even when the phone rings, I get the ring tone, but have to plug in the headset to answer the call. (I've done a cold reboot and it's done no good). I took it to a phone repair shop yesterday and they've said that it's a software error.
Has anyone else had the same sort of problems?
Or if anyone can advise on a possible solution (apart from throwing it out of the window!) I'd be grateful.
Thanks
If its a software issue a hard reset should bring you back im not sure what a cold reboot is so you may have tried this, also never heard of your phone so i wouldnt know ho to hard reset. If hard reset doesnt work then you will probably have to flash a new rom, possibly to wm6 if you can find the rom.My advice is lots of searching and reading... good luck
wm6 won't come soon to my and your lobby's screen
it requires a LOT of time to be done, special tools, extracted ROM for the operation and so on, (btw the phone isn't very commercial, wide-spread and so on, which is demotivating programmers)
ANYWAY, now on the topic:
you can try the CLEAR STORAGE option
found in accessories, it does almost fully hard-reset the phone, but preserves DAB app (I read somewhere, that hard resetting did remove the app, but I'm not sure now...)
anyway, here's how to do the hard reset:
1. Press and hold soft1 and soft2 keys (i.e. menu keys).
2. Press and hold power button for around 1 to 1.5 seconds. Release power button. Keep holding both soft keys.
3. After a while, black screen should show instructions asking user to press '0' key to reset to factory default.
4. Press '0' within the timeout period (which is very brief).
If instructions don't appear on the screen, repeat steps 1 to 4.
it'll show the boot screen, and afterwards a black background with the typings, quickly press 0 to reset, sit and wait
as usual, backup all contacts, data, apps, stuff like that, and then do the job
p.p. Hard reset info via http://wiki.modaco.com/index.php/HTC_Monet
p.p.2 Greetings from Bulgaria, and sorry for my dumba$$ English :]
Hi there Prodigyfied,
Greetings from cloudy and overcast England.
Thanks again for the info.
I've tried what you've suggested, and it's still the same. Do you or anyone else have any other ideas?
Thanks
Paula
Sorry I didn't see this thread sooner!
it is a common fault with HTC phones and is a hardware issue - here is one of the MANY threads on modaco
http://www.modaco.com/content/HTC-T...aCo-com/229405/C500-Stuck-on-Headset-profile/
Should have enough suggestions to get you working!
Good luck.
Thank you
Thanks Confusious,
The suggestion in that other thread has done the trick.
You've made my day
Thank you.
Paula
So here's a peculiar incident:
I have a CDMA TP with a stock ROM and a few basic apps I gathered from these forums and others. I've had it for less than a week.
Tonite, I went to check my text messages. Suddenly, the screen went black and the phone stopped responding. After pressing the power button and fiddling with the keys, I pulled out the stylus and did a soft reset. No response. Confused by this, I tried again, but still nothing. I removed the battery, and turned the phone back on. It froze at the "Touch Pro" screen with the rom/radio/etc info at the bottom. After repeating this a few times I decided to do a hard reset. So, I turn the device on and perform the hard reset. By this point the TP is only turning on SOME TIMES, and I have to take the battery out and put it back in often just to get it to start successfully. So, I finally get the device to boot up and it starts to configure WinMo. Suddenly, while configuring, it freezes. Now I try to turn it back on, and nothing happens.
Basically the device is stuck like this, shifting between not turning on at all and turning on but freezing at the "Touch Pro" screen.
So, my question is, what the heck is going on here? Has anyone else had this problem, or does this sound familiar to anyone? Any help would be greatly, greatly appreciated.
p.s. Yes, the battery is fully charged.
kameisama said:
So here's a peculiar incident:
I have a CDMA TP with a stock ROM and a few basic apps I gathered from these forums and others. I've had it for less than a week.
Tonite, I went to check my text messages. Suddenly, the screen went black and the phone stopped responding. After pressing the power button and fiddling with the keys, I pulled out the stylus and did a soft reset. No response. Confused by this, I tried again, but still nothing. I removed the battery, and turned the phone back on. It froze at the "Touch Pro" screen with the rom/radio/etc info at the bottom. After repeating this a few times I decided to do a hard reset. So, I turn the device on and perform the hard reset. By this point the TP is only turning on SOME TIMES, and I have to take the battery out and put it back in often just to get it to start successfully. So, I finally get the device to boot up and it starts to configure WinMo. Suddenly, while configuring, it freezes. Now I try to turn it back on, and nothing happens.
Basically the device is stuck like this, shifting between not turning on at all and turning on but freezing at the "Touch Pro" screen.
So, my question is, what the heck is going on here? Has anyone else had this problem, or does this sound familiar to anyone? Any help would be greatly, greatly appreciated.
p.s. Yes, the battery is fully charged.
Click to expand...
Click to collapse
Time to take it in and get a new one.....
Same problem here phone started b not coming out of lock mode. Backlight is on but no display on screen (if i tilt the screen left and right i can see light coming from behind) did about 6 hard resets and still same problem. also power button works whenever it wants to. this phone sucks @ss, i want my mogul back. on a second note my replacement will be here on wednesday.
Touch Pro stock rom purchased back in nov when it came out
yeah, i've had the same problem, i found if i hit my phone on the back or side and then batter pull and hit the soft reset while off, not the power button to turn it back on, it comes back on with color on the screen not just blank black screen with backlight, this works mostly every time, but when it doesn't, i just hold the power button down and do battery pull and hit the power button and it works, its like its got a combo of things you have to do before it works.. weird
Boot Up
I have also had similar problems. I for some reason sometimes have to remove my SD card and boot up without it for some reason. Not all the time, but every once in a blue moon. Not too sure how that affects anything, but you may try that too.
well i started a thread here ***help*** because i kinda have the same problem.
i downloaded some cabs, nothing fancy but i had some problems with a theme i downloaded. when i went to deleted i couldnt..... to make a story short, i took it to the sprint store where they tried to do a master reset/ hard reset and it wont take it. it wont do a thing... they say some important files are missing...
the phone works but not the way it should... the time on the home screen wont show up. and some other small things...
dont know how this happened but i would like to know... im worried about new programs to the phone now. ( getting a new one)
still want to see if i can fix this one.
Mayonesa said:
well i started a thread here ***help*** because i kinda have the same problem.
i downloaded some cabs, nothing fancy but i had some problems with a theme i downloaded. when i went to deleted i couldnt..... to make a story short, i took it to the sprint store where they tried to do a master reset/ hard reset and it wont take it. it wont do a thing... they say some important files are missing...
the phone works but not the way it should... the time on the home screen wont show up. and some other small things...
dont know how this happened but i would like to know... im worried about new programs to the phone now. ( getting a new one)
still want to see if i can fix this one.
Click to expand...
Click to collapse
Have you tried re flashing the ROM?
it wasnt HTC's fault for your phone's not booting...thats what happens when u try to mess with the hardware too much and you dont know what your doing
Would you want to sell???
Reboot Brick HTC process
****DOn't take battery out after hard boot***
1.just watch videohttp://www.youtube.com/watch?v=sk56olMkCtU and do what they do but dont take battery out. LEAVE phone STUCK on BOOT screen. Nothign else will move or work but you want phone just like that.
2. connect usb cable to active sync. (this may not link up but leave usb connected anyhow) Do not delete phone profile.
3.use rom like Download MightyROM6_Herman.exe avail at: http://www.lilrico.com/Mighty/mightyromblog/?p=454
4 although active sync is still attatched but may not be connecting. It will connect thru usb anyway when you run the rom software. http://www.youtube.com/watch?v=fV2I2WAFkg4&NR=1
This worked and kept phone from cutting on and off. and restored ROM. don't know about original htc boot. but your phone will work under this rom for now and you can go from there.
hey thanks plain ole dumb, it works now.
man I thought it was over.
thanks again
Hi All,
I come from this thread: http://forum.xda-developers.com/showthread.php?t=1105745
I have followed instructions and installed the CWM-recovery-3.2.0.0-r3-x10mini-Edify in my X10 mini (non-pro) by manually copying system/bin/* and system/xbin/* files (overwriting) to my /system (remounted as rw).
After that, I turned off the device and then turned it on (simple powercycle). After turning on I was repeatedly pressing the "back" button (and not the volume down as done for other devices). The amazing result is that phone booted up apparently in a normal way, except that no hard button is working! I am talking about power button and the menu button.
I have realized that I don't have the star screwdriver at hand, and tomorrow I am leaving for a 1 week trip. When you talk about bad timing
I am of course waiting for battery to die...but meanwhile, can you help me with this (relatively) big problem for me?
Thanks!
If I attach the USB cable I can see it's still alive, and also alarms are ringing as usual! How weird that buttons don't work..has somebody ever experienced this? Can't find same cases online..
hello
I bought my Atrix 1 week ago I am with the following problem:
was updating the phone software for motorola.
but my usb cable was disconnected
now it just keeps resetting until the battery runs out
I tried to use some applications, but still not getting success
someone could help me, I researched a lot but did not find a specific tutorial for this case
thank you very much
So, it loads up completely and then resets when you try to run applications? At what point is it resetting?
leandrofullz said:
hello
I bought my Atrix 1 week ago I am with the following problem:
was updating the phone software for motorola.
but my usb cable was disconnected
now it just keeps resetting until the battery runs out
I tried to use some applications, but still not getting success
someone could help me, I researched a lot but did not find a specific tutorial for this case
thank you very much
Click to expand...
Click to collapse
'I tried to use some applications, but still not getting success' ... what applications have you been trying to use?
'now it just keeps resetting until the battery runs out'... are you able to charge your phone?
I realise that english is not your first language and it is sometimes hard to say what you mean but it is important that you let us know EXACTLY what is happening.
If you are able to charge your phone try these steps first and see if they help
take battery out/put battery in/turn power on/press volume DOWN (-) as you do this/
you should then be in the recovery mode (if you are not repeat steps)
scroll down using the volume +/- button till 'wipe data/factory reset' is highlighted
press power button to select... this should take you to another screen where you confirm selection using the same volume key and power button to select
DOING THIS WILL DELETE ALL USER DATA (things you have managed to put on phone)
after this has finished you should be back on the main recovery screen
select 'reboot system' using volume and then power button
system should reboot. Is there any difference?
hey there,
damn im so nervous right now.
ive not got too much time right now to fix my smartphone but I need it urgently.
i have a s3 with gorgoid custom rom, which i flashed like 4 month ago.
since then I DID NOT make ANY change to the rom or anything. no flashes etc.
I just used it.
now I just wanted to write someone back on whatsapp.
and suddely: smartphone goes off and on again. but I only see the first s3-logo: http://media2.giga.de/2013/10/Samsung-Galaxy-S3-Teaser-Bootloop.jpg
then it turns off and then on again.
...bootloop...
why so suddenly whithout any change to the system?
and even more: what can I do to rapidly fix it? at best without loosing any data........
thanks a lot!
edit: when inserting the battery back in it again, the s3 starts after 3 seconds automatically.
when I try to put in the battery and then quickly hold down volup-home-power button, I shortly see the recovery menu (I have cwm 6 or so) but the phone reboots quickly after it...
Reflash your existing rom, same version, don't wipe data. Clear cache and dalvik, try rebooting.
If that doesn't work then you'll have to factory reset, or may have bigger issues like efs corrupt.
edit: your power button is broken, try wiggling it or replace it.
I cant even get into recovery, thats the f***ing big problem always when inserting the battery, the phone starts itself.
isnt it normal that the phone starts itself when inserting the bootloop or how do you assume my power button is broken?!
and how to "fix" it at least so that it doesnt start itself anymore!? I cant break it off the phone... because then I cant start my phone anymore...
OMG and already fixed it.
what I did:
let the battery out for 15min.
in the meantime tried to rattle the power button a bit (to loosen it in case it somehow stuck and thus pressing constantly).
with 3 fingers pressing vol-up + power button + home button, then with another finger inserting the battery.
that lead me into recovery which then worked.
cleared cache and dalvik cache.
system reboot.
works now
PUH!!!!!!!
Next time if this problem occur again, try to "playing" around with your power button (like push harder three or five time).
I think your power button got stuck, that is why your phone always looping around like in the link you gave.
TheoDores said:
Next time if this problem occur again, try to "playing" around with your power button (like push harder three or five time).
I think your power button got stuck, that is why your phone always looping around like in the link you gave.
Click to expand...
Click to collapse
Yeah true, just happened again.
I hope I can fix it again now...
And I hope so hard that i doesnt get stuck at any time forever