Hello, i have one piece galaxy II i9100 with following specs:
Android Version: 2.3.5
Baseband: i9100XXKI4
PDA: XWKJ1
Gingerbread XWKJ1
I then flashed this piece with ODIN v.185 with pit file and arabic file i9100JPKF3 (2.3.3), now when i turn on the piece i get recovery screen with errror (E: Failed to mount) in red and cannot go to main screen. I tried factory set, boot etc still same problem...help please
Put phone into download mode (volume down + home + power) and flash your official firmware found from Intratech thread with Odin.
Do NOT use PIT or repartition ! ! Follow his instructions exactly.
If you can't get phone into download mode, try a "Samsung USB jig" found on Ebay for around $2
Sent from my GT-I9100 using xda premium
UpInTheAir said:
Put phone into download mode (volume down + home + power) and flash your official firmware found from Intratech thread with Odin.
Do NOT use PIT or repartition ! ! Follow his instructions exactly.
If you can't get phone into download mode, try a "Samsung USB jig" found on Ebay for around $2
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Thanks, i can enter download mode. Can you direct me to the link for Intratech? Also, Baseband of phone is XXKI4 and PDA is XWKJ1. WHich of these is official firmware of my phone? Also, i want arabic on this phone...can i download arabic firmware with android 2.3.5 version and flash this phone?
First of all, you'll ant to get your phone to a working state before worrying about anything else........
[ROM+Guide]Official i9100 Firmwares KG, KH1/2/3/4, KI1/2/3/4/8, KJ1/2/3 Download
XWKJ1
Firmware info
PDA:XWKJ1
PHONE: XXKI4
Date: 11/10/2011
Android 2.3.5
TUR (Turkey): http://www.multiupload.com/5FTC7DOSD1
XWKJ1 Stock Kernel: http://www.multiupload.com/3W4XXTHFSZ
Password: [email protected]
Flash the firmware and kernel with "PDA" only checked via Odin. NO RE-PARTITION !!
Edit: Arabic OJPKG1 CSC: http://www.multiupload.com/1U8T9E5UQO
Flash the above CSC Arabic package "CSC" in Odin same time as kernel "PDA".
Edit2: With flashing a different CSC to that of your Product Code, future updates may not be recognised by KIES. Yoy can try KIES without USB debugging enabled though.
Follow Intratech's Guide Exactly.................
Note: This is official firmware, with no root. There is a slighlty faster way, just by flashing alternative firmware with CSC contained, but my links above is what you asked for
UpInTheAir said:
First of all, you'll ant to get your phone to a working state before worrying about anything else........
[ROM+Guide]Official i9100 Firmwares KG, KH1/2/3/4, KI1/2/3/4/8, KJ1/2/3 Download
XWKJ1
Firmware info
PDA:XWKJ1
PHONE: XXKI4
Date: 11/10/2011
Android 2.3.5
TUR (Turkey): http://www.multiupload.com/5FTC7DOSD1
XWKJ1 Stock Kernel: http://www.multiupload.com/3W4XXTHFSZ
Password: [email protected]
Flash the firmware and kernel with "PDA" only checked via Odin. NO RE-PARTITION !!
Edit: Arabic OJPKG1 CSC: http://www.multiupload.com/1U8T9E5UQO
Flash the above CSC Arabic package "CSC" in Odin same time as kernel "PDA".
Edit2: With flashing a different CSC to that of your Product Code, future updates may not be recognised by KIES. Yoy can try KIES without USB debugging enabled though.
Follow Intratech's Guide Exactly.................
Note: This is official firmware, with no root. There is a slighlty faster way, just by flashing alternative firmware with CSC contained, but my links above is what you asked for
Click to expand...
Click to collapse
Guess what everyone, repaired my phone, flashed with I9100XWKJ1_OJVKJ3_TUR_Android_2.3.5...phone is ok now but i didnt flash kernel, is itok?...also dont want arabic, dont want to take a chance
Glad it worked out! Not sure about the kernel.... But if your product code is wrong, I don't think you'll get OTA updates, you might need it for correct product code. Could be wrong though.
Just hit the "thanks" when you've got the time. Cheers
Sent from my GT-I9100 using xda premium
hi, i followed everything you said. ODIN flashes my phone and it says PASS but when it reboots it still says e: mount failed and it reboots with alot of e: mount failed lines....and also my counter doesnt move...odin says it flashed but it doesnt seem to be working...any idea?
I am on a bell samsung galaxy s2. (and i did try to flash to stock GT-I9100M_BMC_I9100MUGKG2_I9100MUGKG2_I9100M). Even when i try to factory reset in recovery it says failed i feel and when i try to look for a directory i can only see /.../
EDIT: trying the turkish rom fixed everything even if im on a bell phone. Thanks for the link and everything.
E:/ Failed to mount
Hi all,
I have a Galaxy S2 international version.
Now that it is struck in saying
E:\ failed to mount \System
E:\ failed to mount \Cache
and I tried to install all the firmwares
but still the problem persists.
Can someone help me
Related
After flashing I9100XWKE7 XEUKD1 XXKE4 with Odin, after the reboot there was a message saying 'No access to .../csc/system...' or 'Can't access .../csc/system...'.
Phone booted successfully, firmware version upgraded but when I check with *#272*IMEI# - no CSCs are available at all. It only shows my current one.
Anyone else with the same problem?
http://forum.xda-developers.com/showthread.php?p=13730471
xtzz said:
After flashing I9100XWKE7 XEUKD1 XXKE4 with Odin, after the reboot there was a message saying 'No access to .../csc/system...' or 'Can't access .../csc/system...'.
Phone booted successfully, firmware version upgraded but when I check with *#272*IMEI# - no CSCs are available at all. It only shows my current one.
Anyone else with the same problem?
Click to expand...
Click to collapse
If you took the time to research you'd have seem that it's not a multi-CSC package but only contains XEU csc. This is not a problem, it's working correctly. If you want another CSC that flash a firmware package containing that CSC.
Thanks guys.
@Intreatech, no, XEU is okay for me, it's the one I actually want.
hi to everyone.
i have bought a jig for flash a stock rom to go with phone at the warranty.
i tried to download the default rom for my country and network (roumania - orange)
and I can't do that via fus download.
anyone can help me to get this default rom?
also some guide about how to flash it via jig is welcomed. I just need to insert the jig and start the phone, the phone will start in download mode. Here I need to flash the stock rom with odin? that's all?
please help me with default rom.
edit: at about phone i can find these details:
baseband version i9100xxke4
kernel version: 2.6.35.7-i9100xwke7-cl21525
build number gingerbread.xwke7
edit: i've found something here:
http://forum.xda-developers.com/showthread.php?t=1113928
on the orange section from roumania. it's ok if i flash that rom?
edit: i need to flash a stock kernel too?
Are you using the latest version of the Fus Download app (v1.2)? I've just had a look, and under the GT-I9100 phone there's definitely an option for Romania (Orange). The phone model is listed as GT-I9100LKAORO. The latest firmware version appears to be BVKE2/OROKE2/BVKE2, and was last modified on 12th May.
I haven't tried to actually download the firmware, but in theory it should work just fine. The firmware is downloaded from the same servers that Kies uses.
You don't need to use the jig to flash a stock firmware. The only thing the jig will do for you is make it easy to get into download mode on the phone, which is the mode the phone has to be in for Odin to work. Turn off your phone, insert the jig, and it should automatically boot straight into download mode.
Once you've got the firmware files on your computer (you need the TAR file inside the ZIP file that Fus Downloader gives you), and your phone is in download mode and connected via USB, the rest is easy. Click on the PDA button, select the TAR file, and start.
p.s. I don't know what ROM you have currently, but XWKE7/XXKE4 is a generic European firmware, not an Orange Romania firmware. If this is what came on the phone, are you sure you're doing the right thing by flashing the Orange firmware?
Hello everybody,
I got problem with reverting my SGS2 to stock ROM.
Recently I bought used SGS2 with this ROM flashed:
http://www.dialandroid.com/2011/09/install-android-235-i9100xxki3-on.html
I want to put VIPNet ROM from here:
http://forum.xda-developers.com/showthread.php?t=1113928
When I flashed VIPNet ROM with Odin everything went OK in Odin but phone is stuck on screen with SGS2 logo (static one, not animated) and after some time lot of text scrolls on screen that basicly says "E:failed to mount" and "E:can't mount".
I guess that problem is that original owner flashed ROM with PIT file and repartition option so now when I flash original ROM it can't mount partition.
My question is how to repartition partition for stock ROM and what PIT file should I use?
Sorry for my English.
Thank you.
Don't use a PIT file.
Most FAQ that relate to stock roms or rooting, will make it pretty clear you don't touch PIT section on theses phones unless you want to pretty much brick your device. So please just read!
I found the best way to return to stock for me was
Flash cf-root via download mode
Format system/data/cache/dalvik mounts
Flash stock rom using odin + download mode
Take .pit file from samfirmware ,.but be careful. Only use 3parts firmware NEVER firmware with only one part. The means for newest stock firmware use XXKI3 with.pit file and then flash XWKJ3.
I have also problem with reverting to stock rom. I have check rom and i want to put back to VIPnet stock but when i start flashing over odin it stuck on installing factoryfs.img. What should I do to?
Do a complete wipe of your phone before flashing.First root with cf-root.Then boot to recovery and wipe cache patition,dalvik cache,format system,format data,format battery and factory reset.Boot your phone.It will not go past boot logo so after 1min pull battery put it back in and boot into download mode and flash via Odin.
now it stucks on cache.img, please help I'm going crazy.
Use Fus Downloader 2.1 and download the latest stock ROM.
You do not need a PIT file, since it has a built in Sbl.bin file.
It automatically does a repartition when used with ODIN.
Before flashing, remove battery from phone.
Thank you everybody.
I used LiFE1688 solution and everything went fine, so big thanks to you.
There is one more thing I am not sure about, information in about phone is like this:
- Android version: 2.3.5
- Baseband version: I9100BUKI1
- Kernal version: 2.6.35.7-I9100BUKJ3-CL647431 [email protected] #2
- Build number: GINGERBREAD.BUKJ3
Is that realy stock kernal version?
Is my phone still rooted? How to check?
I have to take it to service so it can not be rooted.
Thanks
dgebauer said:
Thank you everybody.
I used LiFE1688 solution and everything went fine, so big thanks to you.
There is one more thing I am not sure about, information in about phone is like this:
- Android version: 2.3.5
- Baseband version: I9100BUKI1
- Kernal version: 2.6.35.7-I9100BUKJ3-CL647431 [email protected] #2
- Build number: GINGERBREAD.BUKJ3
Is that realy stock kernal version?
Is my phone still rooted? How to check?
I have to take it to service so it can not be rooted.
Thanks
Click to expand...
Click to collapse
Thats fine.Some stock kernels come like that.It doesnt mean that you are still rooted.You just now need to make sure you have a clean binary counter so they cant see you have been flashing.
Thank you
What a stupid name for stock kernal
that's interesting, I found tutorial on another forum, where .PIT file use was marked as necessary, I flashed 3-files stock then 1 file with .PIT provided by that forum and everything went smoothly, phone is working
so I did something wrong, it's so confusing for a newbie, what problems can I have in the future after flashing with .PIT file?
Odin doesn't work
Odin detects my phone but not able to write anything. It just gets stuck.
Hello Everyone,
I have upgraded my fireware with I9100XWKE2_I9100XXKDJ_I9100XEUKD1
and followed the instruction
http://forum.xda-developers.com/showthread.php?t=1075278
But it was successfull but now the phone doesn't boot up
It only displays the S and keeps rebooting
Please could you kindly help me out
Thank Very Much
NTOP said:
Hello Everyone,
I have upgraded my fireware with I9100XWKE2_I9100XXKDJ_I9100XEUKD1
and followed the instruction
http://forum.xda-developers.com/showthread.php?t=1075278
But it was successfull but now the phone doesn't boot up
It only displays the S and keeps rebooting
Please could you kindly help me out
Thank Very Much
Click to expand...
Click to collapse
Through KIES? Odin? or CWM?
Through
Odin
Please help me
Bootloop thread.
It's a Boot loop.
Try this http://forum.xda-developers.com/showthread.php?t=1108499
It should work
Edit: Too slow
Hello
Please see a screen shot of what i am getting after fireware upgrade.
It is something with CSC
Please tell me that i haven't bricked my phone :-(
Thank You
Is your phone i9100? or not. that's not bricked if yes
Reflash the firmware
Yes it is
Thank You in helphing meout
First of all let me thank you all for your kindly and fast help
It is working now
I used the link below and watched the vid
http://forum.xda-developers.com/showthread.php?t=1108499
But also checked the version and it says 2.3.3 but first i had 2.3.5
Is there any differences?
Thank You
You gone backwards you now have an older firmware 2.3.5 is newer also 2.3.6 is also out
Have you got a branded handset ie orange, vodafone etc or is it un branded?
I have un-branded device
But i would like to still with Official stock roms.
Can you please advise me which one is for the UK.
My Service provider is T-Mobile UK
ThankYou
NTOP said:
I have un-branded device
But i would like to still with Official stock roms.
Can you please advise me which one is for the UK.
My Service provider is T-Mobile UK
ThankYou
Click to expand...
Click to collapse
I would go with this one http://www.multiupload.com/YJK2EXQFSZ
XWKK2
Android 2.3.6
This package has: PDA: XWKK2| Modem/phone: XXKI3| CSC: XEUKH2 link taken fron here http://forum.xda-developers.com/showthread.php?t=1075278
there is another xwkk5 SOME USE BUT I have been using xwkk2 just fine. Your network settings be ok for any of the firmware above.
Nyssa1104
Thank you very much.
I have installed XWKK2
Android 2.3.6.
Thank You for the direct link.
Would you please also kindly help me root this device as well
Also on Kies i get the following message
"Your Device does not support software upgrading via Kies"
Does this mean that i don't have a stock rom by samsung?
Thank You
NTOP said:
Nyssa1104
Thank you very much.
I have installed XWKK2
Android 2.3.6.
Thank You for the direct link.
Would you please also kindly help me root this device as well
Thank You
Click to expand...
Click to collapse
Yes one moment get the link
Here you go make sure kies is killed in task manager ok http://download.chainfire.eu/53/CF-Root/SGS2/CF-Root-SGS2_XW_XEN_KK2-v5.0-CWM5.zip
download this old bootloader flash it and then there after root your fone old bootloader http://www.multiupload.com/LQQBRQVJUD taken from the link of the firmware I gave you
Would you kindly advise how to root it please
Thank You
NTOP said:
Would you kindly advise how to root it please
Thank You
Click to expand...
Click to collapse
Detail on this link http://forum.xda-developers.com/showthread.php?t=1103399
The root is working now
Thank You very Much.
When reboot the device it comes back with Yellow triangle
I have followed the below instruction but getting confused on Step 4
Please could you kindly guide me
Getting rid of that pesky warning triangle during boot
It is definitely possible to remove that pesky warning triangle during boot when running a custom kernel, though you should be well aware that this method does NOT reset the custom kernel flash counter. The steps are not complicated, but they aren't easy either, so read well.
(1) Make sure you have CF-Root flashed (see the first post). You must have the "CWM Manager" app available.
(2) Make sure you have the same version of CF-Root extracted until you have the zImage file. (ZIP --> extract --> TAR --> extract --> zImage).
(3) Push the zImage file to /sdcard . It must still be called zImage !
(4) Find an original Samsung signed stock kernel (preferably from the same stock firmware you have, but it's not terribly important)
(5) Reboot into download mode (adb reboot download, or boot the device with home and volume-down pressed)
(6) Fire up ODIN, and flash the Samsung kernel
(7) Boot the device with the stock kernel. CWM Manager will still be available.
(8) Start CWM Manager, select Flash Kernel, and select the zImage from CF-Root you previously put on your SD-card. The kernel will flash and the device will reboot.
(9) You will now notice you no longer have the warning triangle during boot, but you are actually running CF-Root with all it's goodies!
(10) In the future, if you only use the Flash Kernel option inside CWM Manager instead of ODIN, the triangle will not return, neither will your flash counter increase. But keep in mind, that CWM Manager can only handle a direct "zImage" if you are NOT running a kernel with full busybox support (this is currently needed for flashing kernels out of .TAR and .ZIP files)
I got it all working
I would like to say a big THANK YOU FOR everyone. and special thank you Nyssa1104
Thank You
So basically i broke my phone and i need help so bad. The wall of text below is what i did. I have a Galaxy S2 GT-I900P and its rooted.Thank you in advance.
So yeah, i tried to install Miui, everything was good except that i didnt have clockwork recovery but i still had the same choices so i thought it doesnt matter. When i got to the part when i have to choose the Adyscorpius file, i went into the wrong directory (i went to sdcard instead of Internal sdcard(where i actually saved the file)). I tried to reboot but i got stuck on the screen with yellow triangle. So i found avideo and did what he did but it didnt work, instead i got a blue screen when i flashed the file. After all the mess that i have done, i finally found the file but it didnt work, i even started all over again but it says "assert failed: getprop blah blah blah...... Installation aborted."
/watch?v=zkwpfYY9a6k
/watch?v=Gixh_q6B_bU
these are the videos that i followed
*Edit* what i did on CWM-based recovery v5.0.2.7
-wipe data/factory reset
-wipe cache partition
-wipe Dalvik Cache
-format /system
just adding more info that might help
So Do you have nandriod backup if yes try to restore if no try go to in DL mode and flash stock Rom. I have too this problem but i have nandriod backup
Paulius7 said:
So Do you have nandriod backup if yes try to restore if no try go to in DL mode and flash stock Rom. I have too this problem but i have nandriod backup
Click to expand...
Click to collapse
Yeah man i did have nandroid i didnt know about it till you told me.... and i've also tried flashing stock rom but it my laptop keeps on hanging when i do. thanks for the reply though
Hayato20 said:
So basically i broke my phone and i need help so bad. The wall of text below is what i did. I have a Galaxy S2 GT-I900P and its rooted.Thank you in advance.
So yeah, i tried to install Miui, everything was good except that i didnt have clockwork recovery but i still had the same choices so i thought it doesnt matter. When i got to the part when i have to choose the Adyscorpius file, i went into the wrong directory (i went to sdcard instead of Internal sdcard(where i actually saved the file)). I tried to reboot but i got stuck on the screen with yellow triangle. So i found avideo and did what he did but it didnt work, instead i got a blue screen when i flashed the file. After all the mess that i have done, i finally found the file but it didnt work, i even started all over again but it says "assert failed: getprop blah blah blah...... Installation aborted."
Click to expand...
Click to collapse
It seems you have access to one CWM recovery, either a temporary one, or a permanent one.
The reason why you are probably getting getprop stuff is because you are using an early bugged version of CWM recovery version 6.x
If you can flash latest version of Siyah kernel or any custom ROM, that error should disappear.
Jokesy said:
It seems you have access to one CWM recovery, either a temporary one, or a permanent one.
The reason why you are probably getting getprop stuff is because you are using an early bugged version of CWM recovery version 6.x
If you can flash latest version of Siyah kernel or any custom ROM, that error should disappear.
Click to expand...
Click to collapse
Currently my laptop cannot detect my phone even on odin mode and im not sure whether thats what gives me the odin hang up :/
Hey. Download newest CWM or Syhian and try to install it througt CWM
Hayato20 said:
Currently my laptop cannot detect my phone even on odin mode and im not sure whether thats what gives me the odin hang up :/
Click to expand...
Click to collapse
can you still access recovery mode?
Paulius7 said:
Hey. Download newest CWM or Syhian and try to install it througt CWM
Click to expand...
Click to collapse
Ok trying it right now
*Edit* didnt work, another blue screen
Jokesy said:
can you still access recovery mode?
Click to expand...
Click to collapse
Yes i can
just tried odin and gave me blue screen again
Hayato20 said:
Currently my laptop cannot detect my phone even on odin mode and im not sure whether thats what gives me the odin hang up :/
Click to expand...
Click to collapse
Kies! Did your laptop have latest Samsung Kies installed? Maybe driver update could make it detect.
Sent from my GT-I9003 using xda app-developers app
Can you restore nandriod backup ?
amifiq said:
Kies! Did your laptop have latest Samsung Kies installed? Maybe driver update could make it detect.
Sent from my GT-I9003 using xda app-developers app
Click to expand...
Click to collapse
just updated it, but it just keeps on connecting. "There was a problem with the driver for MTP USB device" when it was installing for driver
Paulius7 said:
Can you restore nandriod backup ?
Click to expand...
Click to collapse
unfortunately as i am a phone noob, i never knew how to make one so i didnt make any back up.
Bad for you... next time before installing custom roms do nandroid backup.
Send form Galaxy S2. Using XDA Premium
Paulius7 said:
Bad for you... next time before installing custom roms do nandroid backup.
Send form Galaxy S2. Using XDA Premium
Click to expand...
Click to collapse
Yeah i'll try. I wonder if a local phone shop would be able to reset it back to factory settings
Do you have warrant ?
Send form Galaxy S2. Using XDA Premium
Hayato20 said:
Yeah i'll try. I wonder if a local phone shop would be able to reset it back to factory settings
Click to expand...
Click to collapse
Your problem seems to be a small one. What's the real problem now? have you been able to flash anything via Odin?
You don't need to take it to any shop. Do it yourself and learn at once.
But can you say what is that blue screen can you take picture ? Or you just got stuck at boot animation ?
Send form Galaxy S2. Using XDA Premium
Paulius7 said:
Do you have warrant ?
Send form Galaxy S2. Using XDA Premium
Click to expand...
Click to collapse
its a 2 year contract phone from o2
Paulius7 said:
But can you say what is that blue screen can you take picture ? Or you just got stuck at boot animation ?
Send form Galaxy S2. Using XDA Premium
Click to expand...
Click to collapse
http://wiki-errors.com/blue-screen-errors/ its that one in the picture, not sure you will be able to read it
Jokesy said:
Your problem seems to be a small one. What's the real problem now? have you been able to flash anything via Odin?
You don't need to take it to any shop. Do it yourself and learn at once.
Click to expand...
Click to collapse
this is what i did on the CWM-based recovery v5.0.2.7 as i was trying to install miui rom
-wipe data/factory reset
-wipe cache partition
-wipe Dalvik Cache
-format /system
i just got the phone like 2 months ago from my mum and i dont really want her to know that i've broken it already :/
Hayato20 said:
its a 2 year contract phone from o2
http://wiki-errors.com/blue-screen-errors/ its that one in the picture, not sure you will be able to read it
this is what i did on the CWM-based recovery v5.0.2.7 as i was trying to install miui rom
-wipe data/factory reset
-wipe cache partition
-wipe Dalvik Cache
-format /system
i just got the phone like 2 months ago from my mum and i dont really want her to know that i've broken it already :/
Click to expand...
Click to collapse
No problem. You will fix it yourself.
You need to flash back your Original firmware.
Follow the instructions below.
1.
A. Download the firmware for your phone and carrier from Sammobile
In order to save you some time, This is the latest firmware for GT I9100P for O2 UK. You can just simply download it.
Firmware info
GT-I9100P - United Kingdom (O2)
PDA: I9100PXXLPH
CSC: I9100PO2ULP4
Version: 4.0.4
Date: 2012-04-26
Click to download
OR
B. Alternatively, you can just download Unbranded ICS 4.0.3 firmware from here
i). Download UHLPS
Firmware info:
I9100UHLPS Download (Thanks To SamMobile!)
Base Firmware: I9100UHLPS (4.0.3)
Region: South America
Country Argentina
Carrier: Unbranded
Build Date: 12 June 2012
Modem: UHLPG
CSC: AROLP4
Change List: 709483
OR
ii). Download XWLPG
firmware info:
I9100XWLPG Download (Thanks To SamMobile!)
Base Firmware: I9100XWLPG (4.0.3)
Region: Europe
Country Nordic countries
Carrier: Unbranded
Build Date: 24 May 2012
Modem: XXLPX
CSC: NEELP4
Change List: 619441
CF-Root 5.5 LPG: Download
Personally, I would prefer option B.
2. Read the flashing Guide here
3. Extract the zip file you downloaded.
4. Flash the firmware via Odin
done.
When you are done, let me know.
Also, if you have any questions, do let me know.
Jokesy said:
No problem. You will fix it yourself.
You need to flash back your Original firmware.
Follow the instructions below.
1.
A. Download the firmware for your phone and carrier from Sammobile
In order to save you some time, This is the latest firmware for GT I9100P for O2 UK. You can just simply download it.
Firmware info
GT-I9100P - United Kingdom (O2)
PDA: I9100PXXLPH
CSC: I9100PO2ULP4
Version: 4.0.4
Date: 2012-04-26
Click to download
OR
B. Alternatively, you can just download Unbranded ICS 4.0.3 firmware from here
i). Download UHLPS
Firmware info:
I9100UHLPS Download (Thanks To SamMobile!)
Base Firmware: I9100UHLPS (4.0.3)
Region: South America
Country Argentina
Carrier: Unbranded
Build Date: 12 June 2012
Modem: UHLPG
CSC: AROLP4
Change List: 709483
OR
ii). Download XWLPG
firmware info:
I9100XWLPG Download (Thanks To SamMobile!)
Base Firmware: I9100XWLPG (4.0.3)
Region: Europe
Country Nordic countries
Carrier: Unbranded
Build Date: 24 May 2012
Modem: XXLPX
CSC: NEELP4
Change List: 619441
CF-Root 5.5 LPG: Download
Personally, I would prefer option B.
2. Read the flashing Guide here
3. Extract the zip file you downloaded.
4. Flash the firmware via Odin
done.
When you are done, let me know.
Also, if you have any questions, do let me know.
Click to expand...
Click to collapse
Question before downloading, does the country/region matter because im from UK and was wondering if american region would work and thank you so much for the effort
Hayato20 said:
Question before downloading, does the country/region matter because im from UK and was wondering if american region would work and thank you so much for the effort
Click to expand...
Click to collapse
American region will work just fine, so far the firmware is compatible with your phone. At worst you have bad signals, you will just flash another modem.
Flashing another modem shouldn't be important here, because after flashing this firmware, I'll guide you on installing your Miui ROM at once.