Related
I wonder if the phone body could be cracked of loose form or something?
Phelicks said:
I wonder if the phone body could be cracked of loose form or something?
Click to expand...
Click to collapse
i doubt it will crack tbh, its very sturdy design even tho its thin and plastic.
Maybe the screen acts like a support for the frame, either way it feels solid.
the backcover is very sturdy, and will not come off, you have to really use force to take it off, as for how it behaves, normally, I would have it would be moving a lot due to the large screen and what not but it stays in the place firmly.
http://www.youtube.com/watch?v=ErXqnQKs-tA
Behold, the bendable/flexible battery cover.
nice vid no way i would do that to mine
khein said:
http://www.youtube.com/watch?v=ErXqnQKs-tA
Behold, the bendable/flexible battery cover.
Click to expand...
Click to collapse
I know it's flimsy; but I would never do that!
Atleast its some assurance that the back cover will not break easily from drops.
Also acts as a heat suppressor as using metal backplate will conduct heat that might scare the user.
I'm looking at an installed Otterbox Defender, and I'm disturbed to see the plastic sheet is cut way too low on the screen, around the earpiece. The shape of the black plastic shell alone is sufficently large enough to clear the sensors/ffc/speaker. There was no need for them to die cut the screen too. This creates a literal pocket for dirt to collect against the screen. Is that how they all are? That's an unforgivable flaw.
-TM
ffolkes said:
I'm looking at an installed Otterbox Defender, and I'm disturbed to see the plastic sheet is cut way too low on the screen, around the earpiece. The shape of the black plastic shell alone is sufficently large enough to clear the sensors/ffc/speaker. There was no need for them to die cut the screen too. This creates a literal pocket for dirt to collect against the screen. Is that how they all are? That's an unforgivable flaw.
-TM
Click to expand...
Click to collapse
Yes sir, the case was designed that way. Returned mine for that reason.
#Winning# said:
Yes sir, the case was designed that way. Returned mine for that reason.
Click to expand...
Click to collapse
What a stunningly foolish design. All the had to do was glue $0.005 worth of thin fabric between the plastic (doesn't matter since the LCD isn't there) and that would protect the entire front, plus the speaker.
I'm thinking of getting some really light fabric, coating it with silicone, and pressing it in place. Shouldn't affect speaker quality, silicone is soft so no chance of glass damage, and it would essentially waterproof (to a degree of course) the entire front.
The commuter screen protector sucks too. It was flawless for the EVO, but doesn't fit the 3d right
It fits my screen just fine.
The only thing that doesn't fit is the top part of the silicone casing. Everything else is super.
kellybrf said:
The commuter screen protector sucks too. It was flawless for the EVO, but doesn't fit the 3d right
Click to expand...
Click to collapse
siraloz said:
It fits my screen just fine.
The only thing that doesn't fit is the top part of the silicone casing. Everything else is super.
Click to expand...
Click to collapse
Hmm...are you sure you're not talking about the Commuter?
Could be worst....the guys over in the sensation forum are crying because otterbox isnt making them a case lol
Sent from my PG86100 using XDA App
ffolkes said:
Hmm...are you sure you're not talking about the Commuter?
Click to expand...
Click to collapse
That would be why he replied to someone elses post about the Commuter
ffolkes said:
I'm looking at an installed Otterbox Defender, and I'm disturbed to see the plastic sheet is cut way too low on the screen, around the earpiece. The shape of the black plastic shell alone is sufficently large enough to clear the sensors/ffc/speaker. There was no need for them to die cut the screen too. This creates a literal pocket for dirt to collect against the screen. Is that how they all are? That's an unforgivable flaw.
-TM
Click to expand...
Click to collapse
Couldn't agree more. I see this as a huge design mistake.
I saw this too, but I really did not think much of it. I guess there is no such thing as a perfect case.
Sent in 3D using my EVO.
Put a full screen protector on it before case and its fine love mine no issues love it no dust issues.
That's the way the case was made no issues.
nebenezer said:
Couldn't agree more. I see this as a huge design mistake.
Click to expand...
Click to collapse
I returned it to Best Buy, and got the Platinum Series - 2-in-1 Covert Convertible Case for HTC (http://www.bestbuy.com/site/Platinu...18353391762&skuId=2809635&st=evo 3d&cp=2&lp=3). I haven't decided if I'm keeping it yet though.
When I returned it, I feared getting a hard time since technically it was open (even there are no seals on the box) but as soon as I briefly showed the guy the top of the case, where it's cut too low, he was absolutely shocked and said "that looks like it was designed to collect grit and be suicide for your screen" and happily exchanged it.
And yeah, you can (and should I guess) use a screen protector too, but it's just so silly for a case that was designed to be the toughest, most rugged thing to have such a glaring vulnerability. I'd rather they addressed that, than put time and effort into putting a plug over something else. I'd rather get my 2D/3D switch dirty if it meant they would have focused more effort on the most important thing - the screen. And given how tightly and accurately the plastic case fits, why did they have to make the hole for the proximity/speaker/ffc so sloppy and loose? They could have cut that thing out with submilimeter accuracy, and it would have fit great, since there is no need for wobble-room/slop when that case otherwise fits so perfectly.
The Defender does feel very nice in hand though, very solid, and I loved the silicone they used. Had a wonderful feel, not the usual tacky silicone you see in "gel" cases or whatever you call them.
ffolkes said:
I returned it to Best Buy, and got the Platinum Series - 2-in-1 Covert Convertible Case for HTC (http://www.bestbuy.com/site/Platinu...18353391762&skuId=2809635&st=evo 3d&cp=2&lp=3). I haven't decided if I'm keeping it yet though.
When I returned it, I feared getting a hard time since technically it was open (even there are no seals on the box) but as soon as I briefly showed the guy the top of the case, where it's cut too low, he was absolutely shocked and said "that looks like it was designed to collect grit and be suicide for your screen" and happily exchanged it.
And yeah, you can (and should I guess) use a screen protector too, but it's just so silly for a case that was designed to be the toughest, most rugged thing to have such a glaring vulnerability. I'd rather they addressed that, than put time and effort into putting a plug over something else. I'd rather get my 2D/3D switch dirty if it meant they would have focused more effort on the most important thing - the screen. And given how tightly and accurately the plastic case fits, why did they have to make the hole for the proximity/speaker/ffc so sloppy and loose? They could have cut that thing out with submilimeter accuracy, and it would have fit great, since there is no need for wobble-room/slop when that case otherwise fits so perfectly.
The Defender does feel very nice in hand though, very solid, and I loved the silicone they used. Had a wonderful feel, not the usual tacky silicone you see in "gel" cases or whatever you call them.
Click to expand...
Click to collapse
I checked the case ur talkin about out felt flimsy compared to the defender also less protection otter box defender takes the cake there. I didn't like the gay flap they had on the convert to cover the camera lens wait for ballistic to.come out with there case if your wanting a tank.
reaper24 said:
I checked the case ur talkin about out felt flimsy compared to the defender also less protection otter box defender takes the cake there. I didn't like the gay flap they had on the convert to cover the camera lens wait for ballistic to.come out with there case if your wanting a tank.
Click to expand...
Click to collapse
Yeah, I agree. But for me, the best case I ever had for my Evo4G was the Seidio Surface (or BB rebranded equivalent). My plan was to get an ultrarugged case for those days I'm working outside in the field (haha, literally) and the Surface for regular daily use. So that's why the Convert case sorta fits both bills. But I agree, for someone that needs extreme protection daily, the Convert isn't as good as others like the Defender.
ffolkes said:
Yeah, I agree. But for me, the best case I ever had for my Evo4G was the Seidio Surface (or BB rebranded equivalent). My plan was to get an ultrarugged case for those days I'm working outside in the field (haha, literally) and the Surface for regular daily use. So that's why the Convert case sorta fits both bills. But I agree, for someone that needs extreme protection daily, the Convert isn't as good as others like the Defender.
Click to expand...
Click to collapse
Hope it works out for u man. I liked the feel of the otter box more then the seidio convert re branded heard some bad things about how flimsy it was checked it out at best buy didn't really seem as sexy as defender . I think ballistic would be good just that thing is a freaking tank. hope u have good luck with finding a case man.
Yeah, I quickly noticed the dust issue there too, but hey, compared to the bubbles that inevitably arise with stick-on screen protectors? I'll take it. I was able to get a swiffer cloth underneath the gap and managed to rid some of the dust that way. The only other option I might consider, if it becomes a real issue later on, is to poke a piece of a feather duster under the protector and gently swab it every so often. FYI- If you use the plastic clip while in your pocket (With the screen facing the backside of the clip), then it won't pick-up that much dust.
Other than the aforementioned, this case is everything I really ever wanted in a protective shell. I love the lens covers, screen protector, double layer of hard/soft protection, and how it fits the device like a glove. I think we can always find an issue with something if we look hard enough, but this thing rocks.
The Dark Knight Patriot said:
Yeah, I quickly noticed the dust issue there too, but hey, compared to the bubbles that inevitably arise with stick-on screen protectors? I'll take it. I was able to get a swiffer cloth underneath the gap and managed to rid some of the dust that way. The only other option I might consider, if it becomes a real issue later on, is to poke a piece of a feather duster under the protector and gently swab it every so often. FYI- If you use the plastic clip while in your pocket (With the screen facing the backside of the clip), then it won't pick-up that much dust.
Other than the aforementioned, this case is everything I really ever wanted in a protective shell. I love the lens covers, screen protector, double layer of hard/soft protection, and how it fits the device like a glove. I think we can always find an issue with something if we look hard enough, but this thing rocks.
Click to expand...
Click to collapse
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=150623970249&ssPageName=ADME:X:RTQ:US:1123 put this on before the case and ur good to go no dust works great for me in the garage where I work on the shop floor mechanic
Just get a Zagg and pull the plastic piece off the Otterbox..
Sent from my PG86100 using XDA Premium App
nonpointtruth said:
Just get a Zagg and pull the plastic piece off the Otterbox..
Sent from my PG86100 using XDA Premium App
Click to expand...
Click to collapse
LOL if u use zagg don't put to much solution on the protector or u will get water damage on the screen don't know hoe well these screens are sealed og EVO had ****ty glass sealing the screen was never glued all the way around .
I found this review of the Nilkin case for the Xperia P helpful, and wanted to give back by posting a review of my own. Had been pretty keen on the Nilkin case myself, but after reading the reports of the corners cracking, I went looking for another quality option and ended up with a Rock Quicksand. This is a "dark grey" model I bought from Casesss.com.
Note the white specks that appear on the case are bits of dust/fluff that aren't part of the case surface - sorry for overlooking these but they didn't look that visible while taking the pics, and it'd be too much of a pain setting up my tripod and lighting again to redo them nicely with my crappy camera. Also note the pics convey a sort of "white speckliness" overall which is not how it looks in person - IMO, the case looks better than it appears in the pics.
First, the positives:
- The material is really nice. It looks and feels classier than silicone or textured plastic.
- With moist/sweaty hands, the case provides more grip than the smooth metal surfaces of the phone.
- It allows the phone to sit more securely on your lap or a nearby surface (e.g. train/bus seat) with less fear of it sliding off and onto the floor.
- The cutouts are accurate, and there's plenty of clearance left around the headphone jack.
And the cons/caveats:
- With dry fingers, the material is actually less grippy than the phone's smooth metal surfaces.
- Some reviews of Rock Quicksand cases for other phones suggested the material doesn't grip pocket liners - I disagree. It's not a problem with big/loose pockets on cotton pants, but in more constricted front jeans pockets, it will tend to pull out the pocket liner when removing the phone. Still, it's not as bad as silicone in this respect, and doesn't retain nearly as much fluff/dust as silicone.
- The cutout for the transparent bar is much smaller than one on the Nilkin case. This probably increases the case's strength but doesn't look as cool.
- The buttons are a bit harder to press than without the case, but this seems unavoidable - the cutouts appear as non-intrusive as is possible for this style of case.
Overall, I'm very happy with the case for the purpose of providing extra grip in the situations I most need it and providing some protection, without making the phone look ugly. Would be happy to answer any questions in case I missed anything.
I am also using this product. Very good case.
Sent from my LT22i
can one get it online?
The thin band over the camera volume keys power sim speaker.. tend to brake soon... that's the only thing i don't like... and its very often due to the case's rigid body..
Else i highly recommend it... I am currently using an Soft Silicon-Jelly Case.. for an local manufacture..
Adityagrao said:
The thin band over the camera volume keys power sim speaker.. tend to brake soon... that's the only thing i don't like... and its very often due to the case's rigid body..
Else i highly recommend it... I am currently using an Soft Silicon-Jelly Case.. for an local manufacture..
Click to expand...
Click to collapse
Screenies please?
Following up with something I just observed today: at the bottom right corner, the "sand" material has rubbed off, leaving a shiny surface. I've been using the case for about a month and I'm not sure when this occurred. That corner isn't exposed to repeated friction against anything, so it seems as though a one-off contact with something probably caused it.
rogue operator said:
Following up with something I just observed today: at the bottom right corner, the "sand" material has rubbed off, leaving a shiny surface. I've been using the case for about a month and I'm not sure when this occurred. That corner isn't exposed to repeated friction against anything, so it seems as though a one-off contact with something probably caused it.
Click to expand...
Click to collapse
I use this case and this appears to be a problem that arises over time. I keep my phone in my pocket and over two months the edges have lost a lot of sand coating. It doesn't affect the usability of the case but can look pretty ugly. I can't take a photo now but will post one soon.
Another notable thing about this case is that if you have a creaky bottom cap from removing the cap too much, this case will hold the cap securely in place and stop the creaking.
EDIT: Here are some photos of the quicksand peeling. The lighting isn't great but you can see it clearly enough.
http://i.imgur.com/816DFkO.jpg
http://i.imgur.com/1OEzJkd.jpg
peeled too much... which casing can on get or leather pouch?
Zap_12100 said:
I use this case and this appears to be a problem that arises over time. I keep my phone in my pocket and over two months the edges have lost a lot of sand coating. It doesn't affect the usability of the case but can look pretty ugly. I can't take a photo now but will post one soon.
Another notable thing about this case is that if you have a creaky bottom cap from removing the cap too much, this case will hold the cap securely in place and stop the creaking.
EDIT: Here are some photos of the quicksand peeling. The lighting isn't great but you can see it clearly enough.
http://i.imgur.com/816DFkO.jpg
http://i.imgur.com/1OEzJkd.jpg
Click to expand...
Click to collapse
uhm very bad....did you go tu the beach or something???
I used to use this case and yes, it's beautiful at first but after a long time of using, it become ugly and i must change another one =.=
i wish i can find one of those in Egypt ,
I also got one of this case but mine is purple and the rubber of some place on the casing have lost but between it's a nice case I'm happy with it.
After just over three months use, I can report the "sand" has now rubbed off the rear corner adjacent to the one I pictured on the previous page (that one hasn't gotten any worse since the picture was taken). The three other front corners also show the same sort of wear, but smaller. The edges and larger surfaces show no signs of wear.
In my case, it seems most likely the wear is being caused simply by the phone rubbing against the pocket liner when in my jeans/jacket pocket, so it's not a very durable surface. With just the corners worn, mine still looks classier overall than other cases and I'd just as soon choose it again over the alternatives, but I can't recommend it to those whose phones are treated less softly than mine, as it may end up looking like crap in a short period.
Very usefull case it is..:good: protects the device very well....
I have a quicksand case for my Xperia Sola. I just got it a few months back and so far I'm quite happy with it. The overall build quality seems to be very robust. However on two corners the rubber starts to come off, but that doesn't really bother me as long my phone is save
i haven't use case for a yeah and now my XP look like old phone :cyclops:
is the available for xperia go?
GGG
The 920 feels really slippery to be. I'm sure I'll drop it at some point when using it one-handed.
I don't want a big protective case, but just something to add texture to the back of the phone.
Is there some kind of texturized skin I could stick on? (Ideally with no residue if I remove it)
Or some other rubber that would stick on the back?
Or even a really thin silicon case?
I can't be the only one with this problem, has anyone else noticed this and found a good solution?
mattsnowboard said:
The 920 feels really slippery to be. I'm sure I'll drop it at some point when using it one-handed.
I don't want a big protective case, but just something to add texture to the back of the phone.
Is there some kind of texturized skin I could stick on? (Ideally with no residue if I remove it)
Or some other rubber that would stick on the back?
Or even a really thin silicon case?
I can't be the only one with this problem, has anyone else noticed this and found a good solution?
Click to expand...
Click to collapse
I agree that the phone is slippery ... and I started by using a gel case ... which worked, and it had knobby grips on the edges of the case -- and that worked very well to stop dropping the phone (I did that several times before I put the case on it).
Then I tried a phone with the Nokia CC-1043 case ... but that also was too slippery for me. I tried some egrip (they are non sticky things that will "stick" to most any surface ... and if you want something on the back of the phone -- there are pads that are 1" by 2" (about) that would work. However, for me, I wanted something on the edges -- so that I could get it out on the vertical holster that I use. The egrips on the edges did not stay formed along the curve of the case ... so I modified the CC-1043 with some grooves on the edges -- which really works great!
I was going to post some pictures, but I don't have access to a web site for the insertion ... If you send me a private message, I can send you the pictures ...
The grooves were made using a bandsaw with a block of wood taking the place of the phone to provide stability to the case as it was cut ... and there was a block of wood to stop how far into the blade that the case would go, and resulted in a cut that is about 1/2 mm deep ... it provides enough grip to grab the phone out of the case and while holding it -- most of what my hand / fingers are touching are the edges of the phone ...
It depends on which color you have. The blue and red are not as slippery. But I have Ghost armor on mine and it gives it a slightly tacky feel in addition to protecting it from scratches. Mine is red.
I have the black one (matte finish).
Is this the egrips you mentioned? http://www.egrips.com/
It sounds like that might be too much grip. I don't want to have trouble getting the phone into/out of my pocket. I just want more grip so that I don't constantly feel like it's going to fly out of my hand.
I looked at the case you mentioned here and it sounds good: http://www.amazon.com/Nokia-02733P4-CC-1043-Cover-Lumia/dp/B009T8YXCA but having some texture built-in would be nice (as opposed to your DIY grooves).
So I looked at related products and found the following:
http://www.amazon.com/Worldshopping-Black-Matte-Quicksand-Accessories/dp/B00A1Z3U3S/ref=pd_sim_cps_7
http://www.amazon.com/JKase-Premium-Quality-Nokia-Streamline/dp/B00A1UPHYS/ref=pd_sim_cps_17 (the sides of this seem ideal)
http://www.amazon.com/Fosmon-Series-Protective-Nokia-Lumia/dp/B009YLCFZY/ref=pd_sim_cps_3 (don't like the color)
http://www.amazon.com/NOKIA-LUMIA-HYBRID-RUBBERISED-COVER/dp/B009YB0P5G/ref=sr_1_1 (mentioned by a reviewer above)
Can anyone speak for those cases? Probably going to make a decision between those 5 in a day or so.
I had a case like the JKase ... and it is OK, but it adds some noticeable weight to the phone ... it is the one with knobby sides ... it has a very thin strip along the front-bottom of the case that is along the micro USB connector and the speakers ... it never was straight, but it also didn't seem to provide much function ... read other posts that said that they cut it off ...
Don't know about the other cases ...
The egrips link that you have are the ones that I tried ... I always use a case and never just in the pocket -- so I don't know if it would cause a problem ...
Like I said, I like the Nokia case after the modification ... before it, it was still at risk of being dropped ...
mattsnowboard said:
The 920 feels really slippery to be. I'm sure I'll drop it at some point when using it one-handed.
I don't want a big protective case, but just something to add texture to the back of the phone.
Is there some kind of texturized skin I could stick on? (Ideally with no residue if I remove it)
Or some other rubber that would stick on the back?
Or even a really thin silicon case?
I can't be the only one with this problem, has anyone else noticed this and found a good solution?
Click to expand...
Click to collapse
The cc-1043 cases is matte see my ebay sale!
Electrical tape to a thin plastic case.
Simple, thin, and adds a lot of grip. However, it can cause issues if you work in a very hot environment as the tape will goop and slip. Otherwise, I do this with almost all of my devices.
Add texture to slippery cell phone
To make your phone less slippery, you can add textured stickers to it. The kind that you would put on the bottom of the bathtub to prevent slips.
I bought some good ones at Bed, Bath, and Beyond. You can cut them into any shape you want. They were actually shaped like fish. I cut them into strips and put a few on the back of the phone and on the sides.
You can find them in many colors.
Amazon has a good selection.
Surprised nobody has mentioned Ghost Armor. It's perfect for what you want.
I bought their MatteArmor for the back of my Samsung Galaxy tablet and to provide a matte finish instead of it's slippery plastic.
Increased holdability (made up word lol) and maintains the look of the device because it's transparent and thin.
It's that good I paid to have it shipped from the USA to UK. Lifetime warranty, 30 day money-back guarantee
Here's a link to the Lumia range but they do literally any device.
Just bought silicone case from dx.com. Transparent, back side is matted. Not bad for this price, but flash working incorrect - fills all the frame because case scatters light
I'm a a sailing captain and watch people dropping their phones all the time, breaking glass and going overboard. I looked for a solution and couldn't find on that fit the bill as being easy to use, no installation, fits most phones and cases, so I invented one for me. People wanted one, so I patented it and just started production. Just search CellGrasp in google. You'll find me. Drop me a note and you can check it out at the site. Dropping cell phones is a real and growing problem. CellGrasp is a device that is a solution to the problem. Simple, easy, secure, better pics and vids instantly. Just for your information...
well there is something I want to show you guys that has been bothering me for a while now, I didn't want to share it before cuz I find it rather ridiculous since I am the kind of person who notice things other people usually don't. and i'ts most likely my OCD just kicking in.
there is a very slight imperfection near the headphone jack where the glass meets the metal, it seems like a small bend, I'm not sure. here is a video of it.
https://youtu.be/A7dDnzRKFOs
does anyone has experience with anything similar ?.
could it be just the painting process? I can see that some people online are experiencing some paint pealing off. isn't the aluminum andonized though. whats funny is that there are some micro scratches on the device here and there but they don't seem to bother me as much as this. my friends can barely notice it.
fastwing76 said:
could it be just the painting process? I can see that some people online are experiencing some paint pealing off. isn't the aluminum andonized though. whats funny is that there are some micro scratches on the device here and there but they don't seem to bother me as much as this. my friends can barely notice it.
Click to expand...
Click to collapse
I guess you don't use a case? I use bulky OtterBox cases and I couldn't see the issue you're referring to even if I tried.
xbmoyx said:
I guess you don't use a case? I use bulky OtterBox cases and I couldn't see the issue you're referring to even if I tried.
Click to expand...
Click to collapse
my phone has been in a case since day 1. in spiden neo hybird. the thing is that you can only see it under certain light. I believe it came from the factory this way. it looks like it's machined this way or something.
it seems that this slight imperfection is present on all corners near those white bands but not on all S9 plus colors though. only on the shinny variant liliac purple and gray. the black doesn't seem to have it. mine has this corner worst than the others but I can see all the corners are suffering slightly from this looking at the phone directly with overhead light.
I even watched a disassembly video where the guy removed the glass back of the phone and I can see how it's has a bend near the white line in the corner. I think it's part of the manufacturing process of the aluminum andonizing of these colors. since I think the aluminum frame is made from a single block. since unlike other phone that use a plastic buffer between the metal and glass there is no way to hide the machining imperfections which is expected I guess.
Had this on my s8 also silver model.
Did you peel the plastic protective strip off? (Hint: you didn't, I can see it).