So I attemptted to unlock my bootloader for the Atrix, 2.3.4, and it was already rooted. I was using this link http://forum.xda-developers.com/showthread.php?t=1182871 and using the following video http://www.youtube.com/watch?v=S6a0BWquqAc.
Now I was at the screen where it said that the Boot Failed and I took out my battery and put it back in. Now I am stuck on this screen.
SVF:105:1:2
Failed to boot 0x1000
PwrReason: PWT_KEY_PRESS
Starting Fastboot Protocol Support
It has been on this screen for a while now and I am very confused on what to do and how to do it. Any Answers? Did I brick my phone? How do I unbrick? I have tried to take out the battery and did a lot of combinations but nothing is working. I'm sorry, I am a noob at this. Thanks, any help would be appreciated
So instead now I am able to choose between the modes (Recovery, Fastboot etc.) but now when I try to go into fastboot mode it says my battery is too low. It also won't charge at all. Would using someone else's Atrix battery work?
yes another battery would work no prob and i used same method to unlock. mine froze rite after and couldnt run the fix. pulled battery for 30+ seconds and was able to run the fix. another option is to find an external charger
i try to unlock my bootloader with this Automatic bootloader UNLOCK/ROOT for AT&T 1.26/1.57/1.83/4.5.91 [UPDATE 07/31/11] i found in the tread now i get fail to boot 0x1000 SVF 105:1:2 how can i go back to stock 2.3.6 help me please .i can still get into fast boot. my phone was on 2.3.6/ 4.5.141 when i try to unlock the bootloader with this method
It sounds like Nottach ran into a similar problem when unlocking his:
He tried holding the power + volume up buttons WHILE inserting the battery, and the hardware gods smiled & the phone booted into fastboot to finish the unlock procedure.
On edit: You say you now have fastboot access? So long as that's true, it's not a "hard brick" yet. If you haven't finished unlocking the bootloader, the next step is to issue the "fastboot oem unlock" command & finish it out. I do believe you'll have to flash a fruitcake or another rom to get your phone back and functional.
I bricked my phone by Flashing pudding with RSD LITE before I unlock my bootloader. Someone told me I should flash pudding to unlock bootloader. Flashing procedure has failed and I got this at the end : http://tinypic.com/r/2lfk1/6
I was on gingerbread 4.5.91, rooted ATT device. I bought it from USA and I'm in Turkey now. I cant send it to warranty.
Is that a soft or hard brick? Can I fix it?! Please say yes.
Please, Help me! I am waiting your answers.
(I'm so noob about the phone, please tell me with more informations)
Does this look like a hard brick to you?
(If you can't tell, the answer is no.)
---------- Post added at 09:07 PM ---------- Previous post was at 09:06 PM ----------
Wait, what SBF did you use? This **** is important.
i think you can still unlock your bootloader through fastboot,
and then flash system image..
Boot into fastboot mode and use the fastboot OEM unlock code from your computer, please read all the instructions in the pudding thread before panicking
Sent from my MB860 using xda premium
Lol! Don't panic, I just got out of the same situation a few hours earlier. Get your atrix into fast boot mode by pressing power and vol up buttons while placing the battery. Then proceed to unlocking your bootloader. Flash a boot image to get your atrix to boot into OS again, follow this http://www.android-advice.com/2012/flash-the-motorola-atrix-4g-back-to-stock-4-5-91-rom/ if you break your wifi like I did, just follow "Alaq's" Moto-Fastboot: Stock Restore. http://forum.xda-developers.com/showthread.php?t=1421522 or you can just flash the 2.3.6 from this https://sites.google.com/site/motosbf/atrix-sbf-files using rsd lite, open rsd lite, turn on your atrix and connect to your computer, you'll see rsd will still recognize your atrix, then flash the sbf file.
Sent from my Atrix 4G
Too many problems on here result from the people that don't read. You have eyes for a reason!
I'm in Thailand. My phone is show FAILED TO BOOT 0x1000 for 3 second then black screen. Is my phone paper weight or not?
term4802 said:
I'm in Thailand. My phone is show FAILED TO BOOT 0x1000 for 3 second then black screen. Is my phone paper weight or not?
Click to expand...
Click to collapse
This isn't very specific. Can you get a picture?
seem that u have bricked your [email protected]@
Sent from my MB860 using Tapatalk 2
nerfman100 said:
This isn't very specific. Can you get a picture?
Click to expand...
Click to collapse
Thank you for your kind. sorry I am new XDA's user . my clip in youtube
/watch?v=muujX75TVm0
Eek. I'm not sure if you can solve this. If holding Power+Volume Down after the green light shines displays the word Fastboot, there might be hope.
Thanks
eowyn said:
Lol! Don't panic, I just got out of the same situation a few hours earlier. Get your atrix into fast boot mode by pressing power and vol up buttons while placing the battery. Then proceed to unlocking your bootloader. Flash a boot image to get your atrix to boot into OS again, follow this http://www.android-advice.com/2012/flash-the-motorola-atrix-4g-back-to-stock-4-5-91-rom/ if you break your wifi like I did, just follow "Alaq's" Moto-Fastboot: Stock Restore. http://forum.xda-developers.com/showthread.php?t=1421522 or you can just flash the 2.3.6 from this https://sites.google.com/site/motosbf/atrix-sbf-files using rsd lite, open rsd lite, turn on your atrix and connect to your computer, you'll see rsd will still recognize your atrix, then flash the sbf file.
Sent from my Atrix 4G
Click to expand...
Click to collapse
Exactly...I too tried to flash my phone, OS got corrupted and followed the same procedure to recover my phone, without any single data loss I got back my phone.
Main thing that we want to note while flashing the phone is Version of the flash file which we are trying to flash, if it is downgraded version then there is 80% of chance for OS corruption. so before flashing check the version.
It's a softbrick
get into fastboot using volume rocker keys.
use command line on windows
fastboot oem unlock
fastboot oem unlock ################
done.
Thanks,
Jinesh
hey guys, im new to the forum, but i completley pulled a stupid. i tried to upgrade my software to my photon after i rooted it earlier that year. it still comes on after it charges on a wall charger, but then proceeds to go off after about 20 seconds and goes to the failed to boot 2 starting rsd mode screen, I need a tutorial if someone can help. thanks guys.
p.s. i can get it to go to the fastboot screen by pressing down and poer, but not up and power. hmmmmm...?
can you get into recovery? Is it custom? Are you locked or unlocked? What ver android are you on was you on and what did you flash? From fastboot and rsd you can easily fix this phone. just need more info to point you in the right direction and reveal the options we have available to us.
Hi Guys,
Help needed.
I followed the guide to unlock the Atrix MB860 running on froyo.
http://forum.xda-developers.com/showthread.php?t=1136261
After flashing the sbf file, it restarted and showed "failed to boot, entering in RSD mode". As it was given in instruction that this would happen and is called soft brick. So I restarted the phone trying to go in fastboot, but its not entering in fastboot, Screen gets on and it gets off immediately and nothing happens. Thought if powered on it shows:
SVF:108:1:2
Failed to boot 3
Starting RSD mode.
Please guide me out of this situation.
Thanks