hello. need help with the Xperia neo.
i installed a font that the phone
only reaches the screen where it says sony ericsson. and
is always restarting. i read that to make
a hard reset has to be on the left key
on the right and power button. but what these
left and right keys? I'm sick of
try and can not. can anyone
help me explain what these
keys or tell me some way to make a
hard reset through keyboard?
i cant update by the computer because its restart alwais in the begining sonyericsson screen and never can connect to the computer.
please help
sorry my English
reflash with flash tool (use 2.3.4 android)
but I cant connect to the pc because it's always restarting
read tutorial -.-
and where I get the room to flash? and witch room? sorry but I'm new in android
http://forum.xda-developers.com/showthread.php?t=1316394
http://forum.xda-developers.com/showthread.php?t=1351317
All you need, just instal drivers for xperia (instal SEUS)
Its all ok no, thank you very much for your help thank you
Related
please help mee.. i got trouble with my x10 mini pro.. i tried to install cyanogen mod .. but when i reboot ..... my phone boot looping... what should i do
cempe said:
please help mee.. i got trouble with my x10 mini pro.. i tried to install cyanogen mod .. but when i reboot ..... my phone boot looping... what should i do
Click to expand...
Click to collapse
when you see the sony ericsson boot up enter xrec and reinstall... if can't connect your phone to pc and reflash using SEUS or SE PC companion...
Well, this is the mini forum, not the mini pro. So if you took a rom from this section it's probably not compatible with your phone.
Also, use the search function. It's there for a reason.
Lots of people have problems with bootloops, just browse the forum for a while and you will most likely find detailed help for your problem.
boot in xrecovery go to advanced options -> wipe dalvik cache
1. Replace your battery or press both power button and home button
2. switch on phone
3. if see SE logo, press back button 1000x until xrecovery window show up
4. restore your back up or try factory reset
5. reboot
if cant boot to xrecovery then your phone is totally brick...
repair it using SEUS... and start all over again
Yeah, here's the Mini Forum, not Mini *PRO*.
Use the ROMs from here
Repair a phone isn't a hard thing. If you've made a backup before install the rom just restore. You can use SEUS (aka Sony Ericsson Update Service) to restore the phone. Try to reinstall the ROM. Make sure you followed all the steps during the ROM instalation.
Sorry for bad english.
boot looping problem
the same problem is with me also .... the phone is continuosly boot loooping..... i didnt take a backup also using xrecovery ...i cannot connect my phone to sony ericsson pc suite companion also to reinstall the software ....plz plz give me some idea to get off this problem.....
karthickpoy said:
the same problem is with me also .... the phone is continuosly boot loooping..... i didnt take a backup also using xrecovery ...i cannot connect my phone to sony ericsson pc suite companion also to reinstall the software ....plz plz give me some idea to get off this problem.....
Click to expand...
Click to collapse
Don't use PC companion, download SEUS (Sony Ericsson Update Service), install it and follow the instructions.
thanks all .. that help full advice.. im sorry if i use this room.. because i was really confuse yesterday....
cempe said:
thanks all .. that help full advice.. im sorry if i use this room.. because i was really confuse yesterday....
Click to expand...
Click to collapse
No problem, it's normal for first time. Just pay more attention next time. What did you do to fix?
I brick my phone x10 mini and it's now stuck in SE white written name. I searched in forum and I found few solutions. I try flash tool and we succeeded to re-flash , but still not working. There has been no change, the phone remains stuck . (sorry for my english , but I don't speak very good english)
TNX in advanced !
Install SEUS on your PC/Laptop.
Switch off your phone and hold the back key whilst you insert your usb cable, the SEUS should reckognise your phone after you have accepted their T&C's and ready to reflash... It should work..
Warning: You will lose all your data what is stored on your phone memory.
tnx very much. work perfect !
awpboss said:
tnx very much. work perfect !
Click to expand...
Click to collapse
A pleasure to have helped you out!
There needs to be someway this is reinforced to everyone - Brick = SEUS.
Praise the internets for giving us this community.
Seus lol so easy but asked so much SEUS lol
TimmyHate said:
There needs to be someway this is reinforced to everyone - Brick = SEUS.
Praise the internets for giving us this community.
Click to expand...
Click to collapse
sent from this midget x10 mini pro using cm7.2.3.3 14.5
Can you give me the link for downloading SEUS that support X10 mini
Hi im have the same problem
But when im follow the steps to flash mode SEUS tellme its the latest version already in your Phone, and continue stuck in SE white logo
Please helpme to reflash if its posible im can go directly for gingerbread? 2.3.5 CM?
Thanks
sectorzero said:
Hi im have the same problem
But when im follow the steps to flash mode SEUS tellme its the latest version already in your Phone, and continue stuck in SE white logo
Please helpme to reflash if its posible im can go directly for gingerbread? 2.3.5 CM?
Thanks
Click to expand...
Click to collapse
Even with "ur phone is up to date" you r able to click on Repair button, that solves all your problems.
NOOB question!
albanezi said:
Install SEUS on your PC/Laptop.
Switch off your phone and hold the back key whilst you insert your usb cable, the SEUS should reckognise your phone after you have accepted their T&C's and ready to reflash... It should work..
Warning: You will lose all your data what is stored on your phone memory.
Click to expand...
Click to collapse
I guess I'm a total noob here, but how do you turn the phone off when it's stuck on the SE logo screen? I mean pressing and holding the power button doesn't do anything....
velo25 said:
I guess I'm a total noob here, but how do you turn the phone off when it's stuck on the SE logo screen? I mean pressing and holding the power button doesn't do anything....
Click to expand...
Click to collapse
Taking out the battery will put it off
In defense of the noobs around here i can't find the repair button n'or does SEUS give me the Install Anyway option. Have the latest SEUS and now i'm trying an older one hope it works, but for precaution can anybody post a link to an alternative flashing tool ? Much appreciated.
Hey Guys,
I've broken my Xperia X10 Mini...
I tried to flash it using Flash Tool and firmare E10i_2.1.1.A.0.6_Sony Ericsson.ftf (I read that it work to E10a to )
And everting looks good, but after the process he can Turn On!!
When I push the power button, my cellphone vibrate, but don't appear anithing...
I tried to reinstall using SEUS but he says that there's no longer update avaible and don't show me any option to "install anyway"
Can anybody help me??
Try to find a way to unplug the battery.
I don´t know what the Xperia looks like inside but on the Mini there is a small rubber thing behind the cover that exposes the battery connection.
Have you tried hard reset?
And then SEUS?
Yeah, I tried to reinstall by SEUS...
I have shutdown the Battery and nothing...
Is that Hard Reset is made by Hardware???
I can't find anything about that...
repair phone
i was with the same problem: forum.xda-developers.com/showthread.php?p=18018410#post18018410 <<<take a look there
try doing this, works for me
download Sony Ericsson PC Companion 2.0, open it, and click in support zone, then upgrade phone(i don't know what is written but in portuguese it is ''atualizar telefone'') next click repair phone(i don't know this one too, but in portuguese is ''reparar o telefone'')and then just follow the instructions in the screen
sorry for my bad english
Next time post in general and q&a for help.
Sent from my X10mini using XDA App
brenorc97 said:
i was with the same problem: forum.xda-developers.com/showthread.php?p=18018410#post18018410 <<<take a look there
try doing this, works for me
download Sony Ericsson PC Companion 2.0, open it, and click in support zone, then upgrade phone(i don't know what is written but in portuguese it is ''atualizar telefone'') next click repair phone(i don't know this one too, but in portuguese is ''reparar o telefone'')and then just follow the instructions in the screen
sorry for my bad english
Click to expand...
Click to collapse
I tried this steps but it doesn't work!!
The SEUS says me that "It allready updated" and don't show me any option to reinstall the software...
And the PC Companion 2.0, in the repair screen, after update his database, is returns me a error: "PC Companion Error: Can not install or start the components of phone update"
Sorry my poor English and my slowly to respond... I was without connection!
reinstall the seus delete se update engine re-download done
Hey Guys,
Thanks... I recovered my X10 mini with an Generic Rom and Flash Tool!!!
But Thanks all for your help!!
See ya!
hay how did u solve it bro???
im actually facing 100% similar problem after flashing 2.1.1.a.0.6 rom.....and nothing appears after.... so what generic rom u used? and please write the steps for me..... i tried installing "Sony Ericsson X10i_2.1.A.435_GLOBAL-GGL GENERIC 1232-9897.ftf" but it gives error while flashing on start...process aborted... because i think the previous rom (2.1.1.a.0.6) was successfully installed... in the end it says to turn on phone and turn on option of debugging but the phone u know wont turn on...!! please help with ur experience
rang6300 said:
im actually facing 100% similar problem after flashing 2.1.1.a.0.6 rom.....and nothing appears after.... so what generic rom u used? and please write the steps for me..... i tried installing "Sony Ericsson X10i_2.1.A.435_GLOBAL-GGL GENERIC 1232-9897.ftf" but it gives error while flashing on start...process aborted... because i think the previous rom (2.1.1.a.0.6) was successfully installed... in the end it says to turn on phone and turn on option of debugging but the phone u know wont turn on...!! please help with ur experience
Click to expand...
Click to collapse
SEUS did not work?
I really suck at working in my cellphone xD
I was trying to downgrade a Xperia Neo MT15i with the flastool, i was downgrading from 2.0.4.A.0.62 to 0.42 but i am i noob and i forgot to put the usb debbuging n in the phone soo something happen and my phone now doesnt power on, i can connect to pc by flashmode but it is constantly turning on and off.
Let me explainy i power the phone on and it only show "Sony Ericsson" and flash the screen with light and thats it after that the phone is off and after a few seconds does the same thing.
Can someone help me.
Maybe it has not finished with the guarantee and i can use it to get a new one.
I know i am a really noob at this things i am english is not perfect but what can i tell, sh.. happen.
Thanks for your time and i will update the status of my phone.
I guess you didn't unlocked the boot loader.If you didn't unlocked the boot loader try using pc companion to fix the phone.
Pc companion/support zone/phone software update/repair phone and follow the instruction.I think this will fix the phone.
This thread is closed. Please read this before start a new thread. Thanks.
Hi all,
It seems my X10 mini pro is completely bricked.
Firstly I root my phone
after that I copied the xrecovery and made a restart, till then everything was rolling smoothly.
I backed up and reseted to factory settings. loaded the new update.zip and after the restart that was needed my phone briked
it's not a common brick. I can't use flashtools to recover it.
here is the problem that appears...
6/030/2013 18:30:20 - ERROR - ERR_SEVERITY="MAJOR";ERR_CLASS="SECURITY_CLASS";ERR_DYNAMIC="SIN header verification failed"
16/030/2013 18:30:20 - ERROR - Error flashing. Aborted
Click to expand...
Click to collapse
phone is not responding to any command. Plus it needs to be turned off if you wanna restore the backup you saved previously...when I try to flash it, phone turns ON
I read many guides in this forum to unbrick it but didn't find anything that suits to my occasion.
If any other detail is missing from my report please ask me to add it.
Sorry for my english
Thanks in advance.
Use SEUS to restore Download from:
SEUS
Dont forget to pull of your battery for 4 seconds, for turn off your phone before connect your phone.
gnickz0r said:
Hi all,
It seems my X10 mini pro is completely bricked.
Firstly I root my phone
after that I copied the xrecovery and made a restart, till then everything was rolling smoothly.
I backed up and reseted to factory settings. loaded the new update.zip and after the restart that was needed my phone briked
it's not a common brick. I can't use flashtools to recover it.
here is the problem that appears...
phone is not responding to any command. Plus it needs to be turned off if you wanna restore the backup you saved previously...when I try to flash it, phone turns ON
I read many guides in this forum to unbrick it but didn't find anything that suits to my occasion.
If any other detail is missing from my report please ask me to add it.
Sorry for my english
Thanks in advance.
Click to expand...
Click to collapse
Press home and power buttons together, it will restart the phone, then start pressing the back-button repeatedly to get back into recovery and restore your previous rom from there. (Come to think of it, following my last paragraph below, you probably don't have recovery on your phone anymore, so, as Rempty mentioned above, repairing with SEUS or PC Companion would be the start to recover your phone to a usable state,.)
The error flashtool gave you is because you didn't unlock the bootloader and didn't change the kernel on your phone. It can't flash any non-sony kernel on a locked bootloader.
What is this 'update.zip' you're talking about? Most full roms have more informational names to distinguish between different zips. An update.zip is usually only for hotfixes to ROMS already flashed, and not a complete ROM.
Thanks a lot guys. I solve my problem with SEUS.
Phone completely formated.
Love you guys
Hey guys I hve instaled xrecovery and minicm9 too on my x10 mini pro I hve wiped chache,etc nd when I reboot , it hangs on SE logo plz help me
SE logo?? You forgot to install nAa kernel, do you unlock bootloader??, remember that minicm9 is not for stock kernel.
Sorry for my bad english
Sent from my iPhone6 using xda business
W'll when I try to unlock the bootloader it gives error can u plz help me
william chauhan said:
W'll when I try to unlock the bootloader it gives error can u plz help me
Click to expand...
Click to collapse
use flash tool to unlock ur bootloader
make sure ur fone is rooted
Sent from my U20i using xda premium
I'm already using flashtool bt it's nt working
william chauhan said:
I'm already using flashtool bt it's nt working
Click to expand...
Click to collapse
What's your phone's build date? Ex.11w37(written on the stick placed on the back )
Sent From My BEAST , I mean X8
My build no. Is 2.1.1.A.0.6
Plzz help me..
Plz help me.. I try to unlock the boot loader .. and the phone bricked !!!! what am i going to do??
i try the PC COMPANION but my phone did not detect it..
this is what i did to bring back life to my x10 mp.
Switch phone completely off then if not already running start pc companion. then this step really got to me because of the phone constantly restarting, to get pc companion to detect the phone, i pressed and held the back key down and connected the usb cable just like flashing a new kernel. pc companion then detected the phone as x10. doesnt matter. then start the update and you must do the same thing again to force update service to detect the phone and to give the option to repair. then once thats done follow the prompts through update service, it will then ask you what phone you have, choose x10 mini pro and update.its a long process but be patient and your phone will work again.
Hey guys I used the flashtool to unlock the bootloader and I also followed the steps too but problem is when the phone was rebooted it didnt read the sim card now what should I do ? Please help
thas911 said:
this is what i did to bring back life to my x10 mp.
Switch phone completely off then if not already running start pc companion. then this step really got to me because of the phone constantly restarting, to get pc companion to detect the phone, i pressed and held the back key down and connected the usb cable just like flashing a new kernel. pc companion then detected the phone as x10. doesnt matter. then start the update and you must do the same thing again to force update service to detect the phone and to give the option to repair. then once thats done follow the prompts through update service, it will then ask you what phone you have, choose x10 mini pro and update.its a long process but be patient and your phone will work again.
Click to expand...
Click to collapse
my phone is in HARD BRICKED.. my phone is dead the phone didnt charge and totally dead.. what should i do?? help me??
i also have a hard bricked,even when i put it to charge the phone its not blink the led
help