hey guys,
i connected my SII in download mode with my pc , started odin , select PDA the CF-root insecure.tar and pressed Start..
it completed with any error message and i thought that the phone would be restart.
But the phone is still in the boot loop..
i can't get into recovery mode, but into download..
What should i do ?
thx,
Maxomix
Do it the traditional way using the XWKDD insecure kernel and SuperOneClick if you have any problems. Link in my signature.
For now, flash back a stock rom using Odin and do the traditional rooting method for SGS2, it's guaranteed to work as I did it on random 5 devices I was given by friends. Works with any firmware, but slower than CF-Root, but gets the job done.
nicholaschum said:
Do it the traditional way using the XWKDD insecure kernel and SuperOneClick if you have any problems. Link in my signature.
For now, flash back a stock rom using Odin and do the traditional rooting method for SGS2, it's guaranteed to work as I did it on random 5 devices I was given by friends. Works with any firmware, but slower than CF-Root, but gets the job done.
Click to expand...
Click to collapse
first, thank you so much that you have answered !
i have done it with the traditional way, but it completed and then it is hanging in bootloop, i haven't done the second step with super one click because the tutorial(And then there was root!) says me that i have to do this when the phone is completely restarted? .. Where can i download the stock rom ?
Download a stock rom from Intratech's thread: http://forum.xda-developers.com/showthread.php?t=1075278
Choose one appropriate for your version.
I hope you have the GT-I9100, cuz if you flashed the wrong ROM, you're in big trouble.
You can also follow Intratech's method on rooting.
nicholaschum said:
Download a stock rom from Intratech's thread: http://forum.xda-developers.com/showthread.php?t=1075278
Choose one appropriate for your version.
I hope you have the GT-I9100, cuz if you flashed the wrong ROM, you're in big trouble.
You can also follow Intratech's method on rooting.
Click to expand...
Click to collapse
thanks, ..
i have the i9100
i will try that
thank you mate, but it worked after the million try of rooting .. this is the phone of a friend .
but thanks anyway
Related
Hi there,
Total noob here, so bear with me.
I recently bought a SGS2 and flashed it with CF-Root without any problem to KJ3.
Now, I saw there's this new KK2/5, with 2.3.6, and I was thinking about updating, if possible using CWM Manager. I guess I should follow the steps in the second part of this post.
Now my questions are:
1. Do I need to flash first the stock firmware? Or can I just directly flash the new CF-Root?
2. What does "factoryfs ("system") is mandatory part at the moment. " mean?
3. I noticed there is no stock KK5 in Intratech's thread so far (just a Frankenstein, still not completely sure what that means). Does that mean I cannot use KK5 CF-Root? Should I better go with KK2?
4. Can I flash directly CF-Root kernel and the rest of the stock firmware together? Or should I first flash the full stock FW and then flash CF-Root? Would I lose root and CMW then? That would mean I'd have to flash CF-Root via Odin, right?
5. Last stupid question. Where is the thanks button??
Thanks everyone.
1. You need stock firmware, CF-Root only gives kernel.
3. As previously answered, CF-Root goes side by side with stock ROM, if there's no stock ROM available for latest CF-Root, get a lower version.
4. You should flash first stock, then CF-Root. You will loose root & CWM.
5. The thanks button is just below this answer, near the Quote button.
pancomido said:
Hi there,
Total noob here, so bear with me.
I recently bought a SGS2 and flashed it with CF-Root without any problem to KJ3.
Now, I saw there's this new KK2/5, with 2.3.6, and I was thinking about updating, if possible using CWM Manager. I guess I should follow the steps in the second part of this post.
Now my questions are:
Click to expand...
Click to collapse
Firstly if you are flashing and rooting flawlessly you are no longer a noob ... i get you are trying to upgrade and root .........
1. Do I need to flash first the stock firmware? Or can I just directly flash the new CF-Root?
Click to expand...
Click to collapse
I'd recommend you flash the stock firmware as there may be incompatibilities with the Kernel and existing PDA , MODEM and CSC. Plus no one just uses the newer kernel ppl flash / upgrade the entire firmware so that they can actually kernel is like the heart of the system responsible for power distribuation and stuff. PDA is the main firmware component UI sortof like the middleware .
2. What does "factoryfs ("system") is mandatory part at the moment. " mean?
Click to expand...
Click to collapse
CWM is usually used to flash the kernel or zImage files. For flashing entire firmware via SD card i'd recommend Mobile Odin Pro by Chainfire which consumes the entire tar file and keeps root intact. This'll change your firmware and kernel while keeping you rooted just flash a CF-Root after that.
3. I noticed there is no stock KK5 in Intratech's thread so far (just a Frankenstein, still not completely sure what that means). Does that mean I cannot use KK5 CF-Root? Should I better go with KK2?
Click to expand...
Click to collapse
Frankenstein is just a combination of different Modem/CSC(Usually Multi) and PDA of the latest firmwares which is combined for the best performance is most importantly Non-Wipe ROM. Intra usually puts in a Multi-CSC for several region's use.
4. Can I flash directly CF-Root kernel and the rest of the stock firmware together? Or should I first flash the full stock FW and then flash CF-Root? Would I lose root and CMW then? That would mean I'd have to flash CF-Root via Odin, right?
Click to expand...
Click to collapse
Yeah pretty much but i'd say you give mobile Odin a try i've heard it's pretty cool. When using a computer use Stock first and then root.
5. Last stupid question. Where is the thanks button??
Click to expand...
Click to collapse
Just left most button on the right side of this post is activated for a forum when you post for the first time.
Thanks Az,
I can't see the Thanks button in any other thread. Do I have to write first before it becomes available?
So, if i need the stock kernel first, what are the instructions in the post I linked (CF-Root v5.0: Upgrading your firmware) for? Flashing full firmwares that already have CF-Root included? Wouldn't that be the same as if I got the other FW files (phone, CSC) from stock and added the CF-Root kernel (pda)?
Any idea about question #2?
Thanks again.
At first follow the instructions in this thread and flash kk2 or kk5 as you want the newest ;p : http://forum.xda-developers.com/showthread.php?t=1075278
Then when you flashed a full new firmware from that guide you can proceed to the instructions of CF-root with the matching kernel (kk2 or kk5 just the same version as you chosen in the previous step) from that topic to flash and gain root and CWM.
CF-root is only a kernel that is modified, so it is only a small part of a firmware but with nice extra features added.
pancomido said:
Thanks Az,
I can't see the Thanks button in any other thread. Do I have to write first before it becomes available?
So, if i need the stock kernel first, what are the instructions in the post I linked (CF-Root v5.0: Upgrading your firmware) for? Flashing full firmwares that already have CF-Root included? Wouldn't that be the same as if I got the other FW files (phone, CSC) from stock and added the CF-Root kernel (pda)?
Any idea about question #2?
Thanks again.
Click to expand...
Click to collapse
Yeah it activates in the forum/thread you write in .....
yup stock kernels are signed by samsung and hence are requred for flasing over CF_Root kernels. as they remove the yellow triangle. factoryfs simply stands for factory file system it is recommended to include in case the newer firmware has a change in the file system / tables if you don't include it while flashing firmware using CWM you might end up bricking your phone. But the FW flashing process through CWM is pretty complicated and cumbersome i use odin as it is a simple job.
Thanks, everyone. Sorry for the crosspost, digi. When I saw your answer, I couldn't edit it for five minutes because I'm too new.
Anyway, I would try Mobile Odin Pro, but the country I'm in doesn't support paid apps, so it shows as incompatible with my device...
The only reason I'd wanted to use CMW was in order to avoid the flash counter (which is stupid because it is already on 2 or 3, I guess) and the yellow triangle removal process. So I guess it is not much of a problem.
Ok, so here's another question. What is this non-wipe stuff? It means I don't need to factory reset the phone after flashing?
Also, would you guys reccommend to use the Frankenstein FW with KK5 and the CF-Rooting to KK5? If these Frankenstein FW are created for better performance, the only difference is that they're not the stock configuration and won't allow me to update via Kies, but otherwise should give a better experience, right?
Sorry for being a scary cat, I just don't want to break my phone too quickly.
digi_fort said:
Yeah it activates in the forum/thread you write in .....
yup stock kernels are signed by samsung and hence are requred for flasing over CF_Root kernels. as they remove the yellow triangle. factoryfs simply stands for factory file system it is recommended to include in case the newer firmware has a change in the file system / tables if you don't include it while flashing firmware using CWM you might end up bricking your phone. But the FW flashing process through CWM is pretty complicated and cumbersome i use odin as it is a simple job.
Click to expand...
Click to collapse
digi_fort said:
Firstly if you are flashing and rooting flawlessly you are no longer a noob ... i get you are trying to upgrade and root .........
I'd recommend you flash the stock firmware as there may be incompatibilities with the Kernel and existing PDA , MODEM and CSC. Plus no one just uses the newer kernel ppl flash / upgrade the entire firmware so that they can actually kernel is like the heart of the system responsible for power distribuation and stuff. PDA is the main firmware component UI sortof like the middleware .
CWM is usually used to flash the kernel or zImage files. For flashing entire firmware via SD card i'd recommend Mobile Odin Pro by Chainfire which consumes the entire tar file and keeps root intact. This'll change your firmware and kernel while keeping you rooted just flash a CF-Root after that.
Frankenstein is just a combination of different Modem/CSC(Usually Multi) and PDA of the latest firmwares which is combined for the best performance is most importantly Non-Wipe ROM. Intra usually puts in a Multi-CSC for several region's use.
Yeah pretty much but i'd say you give mobile Odin a try i've heard it's pretty cool. When using a computer use Stock first and then root.
Just left most button on the right side of this post is activated for a forum when you post for the first time.
Click to expand...
Click to collapse
Super informative
pancomido said:
Thanks, everyone. Sorry for the crosspost, digi. When I saw your answer, I couldn't edit it for five minutes because I'm too new.
Anyway, I would try Mobile Odin Pro, but the country I'm in doesn't support paid apps, so it shows as incompatible with my device...
The only reason I'd wanted to use CMW was in order to avoid the flash counter (which is stupid because it is already on 2 or 3, I guess) and the yellow triangle removal process. So I guess it is not much of a problem.
Ok, so here's another question. What is this non-wipe stuff? It means I don't need to factory reset the phone after flashing?
Also, would you guys reccommend to use the Frankenstein FW with KK5 and the CF-Rooting to KK5? If these Frankenstein FW are created for better performance, the only difference is that they're not the stock configuration and won't allow me to update via Kies, but otherwise should give a better experience, right?
Sorry for being a scary cat, I just don't want to break my phone too quickly.
Click to expand...
Click to collapse
Most of the stock roms provided directly are wipe means they reset the system SD card when flashed. Intratech removes the script from the ROM specifically from the Frankenstein. About CF's Mobile Odin there are other ways to get it PM ChainFire himself for it and just give him a beer offline. Any flash of a different region via Odin will not allow you to update via KIES for that you need to flash the stock ROM of your specific region and then update it to the new ROM for your region it will as it is be provided by intratech in his thread eliminating the use of KIES entirely.
Nice, thanks. I've been reading on CF Mobile Odin, maybe I'll contact him and give it a try then.
So, any reason I should not flash the newest Frankestein FW and then root it with CF-Root?
Also, if CSC doesn't have anything to do with the supported languages, what does it do exactly? I read it is specific region settings, what if my carrier is not included? Would that be a problem? I live in China, using China Mobile.
Thanks, guys.
pancomido said:
Nice, thanks. I've been reading on CF Mobile Odin, maybe I'll contact him and give it a try then.
So, any reason I should not flash the newest Frankestein FW and then root it with CF-Root?
Also, if CSC doesn't have anything to do with the supported languages, what does it do exactly? I read it is specific region settings, what if my carrier is not included? Would that be a problem? I live in China, using China Mobile.
Thanks, guys.
Click to expand...
Click to collapse
Sorry weekend pretty busy
Nope no reason why you should'nt ........ Frankenstein is pretty much stock only a bit tweaked .... personally i never flash CSC for my region ...... yea they are supposed to provide APN settings and all but for you guys there in china there have been certain issues .... i would recommend you flash the CSC after you flash the ROM your region's CSC would be available in the frankenstien section as well .... just ensure after flashing the ROM everything is in order.
Thanks digi. I almost forgot about this thread. I ended up flashing Frankenstein KK5 and then Siyah Kernel to give it a try. I didn't flash CSC, but I haven't had any problem. It seems APN settings are grabbed from the network or the SIM or something. I have no idea. What are the issues you referred to in China?
I am trying to find my way into a Chinese forum, but my limited Mandarin is making things difficult. After reading a lot, I arrived to the conclusion that most problems (battery, connectivity, gps lock...) are carrier/location related (I mean, if you flash correctly and everything seems to be running fine). So I thought I should try getting some local information. Hope I can achieve something, because I am getting really poor battery when wifi is on...
Is there any place where one can compare modem/kernel/rom/battery performance in relation to location/carrier. I think that would be sooo useful. Maybe I should give MIUI a try, since it is Chinese...
Hello how i can back to stock my galaxy s2? i rooted and put checkrom works nice but i want to learn how get back to stock again im confused
I didnt wrote down the pda version and kernel before install checkrom and rooted what recommend me to do?
thanks.
Just flash official firmware package from Intratech's XDA firmware thread via Odin.
Use your Product Code (sometimes found on your box) on the Chek Fus Download website to find your original PDA etc (if you're not 100% sure) or search the first couple thread posts for match.
Follow his flash instructions and you're done
Sent from my GT-I9100 using xda premium
alexistkd said:
Hello how i can back to stock my galaxy s2? i rooted and put checkrom works nice but i want to learn how get back to stock again im confused
I didnt wrote down the pda version and kernel before install checkrom and rooted what recommend me to do?
thanks.
Click to expand...
Click to collapse
you can get your stock firmware from here
http://forum.xda-developers.com/showthread.php?t=1075278
It also includes instructions of using odin and flashing the downloaded firmware .... if you are rooted take a nandroid backup every time you flash custom from stock ........ that ways you'll always have a backup of the stock firmware ......
Yep, my post is rather incomplete, forgot to add the link cheers
Sent from my GT-I9100 using xda premium
So I just came across this and got to this link http://forum.xda-developers.com/showthread.php?t=1075278 however, I am SO lost. I don't know what firmware I'm supposed to download. Yes I'm a noob, but seriously trying to figure all of this out so help is greatly appreciated. OH and I'm trying to get back to stock in attempts to get CF root to hopefully get cyanogenmod to install rather than abort the installation.
rististien said:
So I just came across this and got to this link http://forum.xda-developers.com/showthread.php?t=1075278 however, I am SO lost. I don't know what firmware I'm supposed to download. Yes I'm a noob, but seriously trying to figure all of this out so help is greatly appreciated. OH and I'm trying to get back to stock in attempts to get CF root to hopefully get cyanogenmod to install rather than abort the installation.
Click to expand...
Click to collapse
Actually all the firmwares provided in the thread are stock ..........
If you are a Noob i would not recommend cyanogenmod though it is pretty good but i've heard it's for advanced users and stuff ........ why do you need to flash stock is my primary question ........... use this thread only http://forum.xda-developers.com/showthread.php?t=1075278
You need to update latest firmware for your region as a KIES update is there / on the way?
Find out the latest firmware for your region to flash via http://fus.nanzen.se/ it will provide you with the stock firmware your phone should have after selecting the specific region.
You need to update latest firmware irrespective of region (like Me)
Just download the latest firmware available in the 2nd or 3rd section of the thread. in this case 2.3.6 (KK2 or KK5).
In case of any more issues post back.
so I tried kk2 and kk5 and kk2 gave me no service, and kk5 failed to even install. I'm at a loss. I really want CF root, but can't install it on the stock eg30 that I've been using as my stock rom. SO what next? Any other way to figure out which stock firmware from that link will work for my phone?
hello???
Is there anyone who can help me figure this out?????
Hi all, I have a brand new galaxy SII bought in Belgium. I wanted to root it but something went wrong. I used this guide:
http://galaxys2root.com/galaxy-s2-root/how-to-root-galaxy-s2-i9100-icsandroid-4-0/
Now I think I know what went wrong, the guide is only for a device already on ICS (i think) which was not the case. Trouble is that I do not know which kernel version was on the device before the flash and now he doesn't boot anymore. I just see the galaxy S2 logo with triangle and that's it.
Can you please help me? I'm sorry, I know I was really not careful enough...
If you can get into download mode, follow the guide here to root your phone & consider yourself lucky.
If you can't get into download or recovery mode, you're probably boned. Try a jig before you send it to a service center or have it JTAG repaired by a 3rd party.
MistahBungle said:
If you can get into download mode, follow the guide here to root your phone & consider yourself lucky.
If you can't get into download or recovery mode, you're probably boned. Try a jig before you send it to a service center or have it JTAG repaired by a 3rd party.
Click to expand...
Click to collapse
Thank you for the very quick answer I can get to the download mode without a problem so I think its repairable. Also thank you for the link, problem is that I do not know which version of the insecure kernel i need since the phone doen't boot anymore and I can't see the about phone page... Any tips on that? Or will it be a trial and error game to see with which kernel the phone boots?
Thank you very much for your help!
OK. Being able to get into download mode is good. Now, finding the kernel that came with the phone...
I probably wouldn't go down the trial & error route, have a look at this thread . Don't worry about the links, what you need to do is find the matching kernel for your carrier & country. Then you can look for the matching insecure kernel in the CFRoot thread I linked you to in the previous post.
Edit to add - Linked to wrong thread in first instance, OP, make sure the link you click on takes you to 'Official I9100 Carrier Branded Firmwares'.
Thank you very much. You really are a great help I will try it tommorow morning when I have a bit more time (I don't want to screw it up again ).
No probs ;-) If you have any dramas, post in this thread again. Important thing is to make sure you find the right kernel in that carrier branded firmware thread in the 2nd post, then in the CFRoot kernel thread find the closest match.
For example, if your original kernel is --KF2, you would try and find a matching CFRoot kernel. If there is a KF2 CFRoot kernel, good. You use that. But, if there wasn't a KF2 CFRoot kernel but there was a KF1 or KF3, you could use either of those. Again, this is just an example but should give you an idea of what to look for.
I just booted succesfully. No data lost, everything just fine I did exactly what you said and it worked like a charm. I cannot thank you enough Just wanted to let you know
Really ? Got the phone rooted & all working well ? Very good No probs, glad it worked out well for you/no data loss & most importantly no borked phone
Yep all working fine now. I even put ressurection ics on it without a single problem very glad you were so helpful!
It was so unfortunate that I'm now in this position, a stuck galaxy s 2 logo with triangle on it.
Earlier today, I rooted an SGS2 of my friend on 2.3.4 using XW_NEE_KI4-42: 2.3.4, CF-Root v4.2, SU 3.0, "insecure" to correspond with the 'KI4' code. After that I flashed it with CM9 and all went well.
Seeing the success, another friend wanted me to do the same to his device. I gladly picked up the phone (which was using an official ICS ROM) and simply rooted it using the same file as above via Odin. That is the part where I did wrong. So this phone won't boot and now I have no idea what the 'code' was. Still, odin mode is accessible.
So, where do I go from here?
Should I make new thread for this? Or is the solution provided here is applicable?
The sgs2 was unbranded aka international version.
Thanks in advance.
Flash a stock rom via Odin. That will give you a 'clean slate'. Search Intratech's firmware thread, if the links don't work search Samfirmware.com for the stock firmware you need.
Alternatively, you can get the latest firmware for the phone model/carrier/country with the PC version of Checkfus (search for it on here/Google). The firmware package you download can be flashed in Odin following the instructions in Intratech's thread.
you were the one who solved OP problems n now here you are again to help me out. Seriously, thanks.. I'll definitely will give it a try soon when i got back n I'll report back.
Thanks man.
ethanmars said:
It was so unfortunate that I'm now in this position, a stuck galaxy s 2 logo with triangle on it.
Earlier today, I rooted an SGS2 of my friend on 2.3.4 using XW_NEE_KI4-42: 2.3.4, CF-Root v4.2, SU 3.0, "insecure" to correspond with the 'KI4' code. After that I flashed it with CM9 and all went well.
Seeing the success, another friend wanted me to do the same to his device. I gladly picked up the phone (which was using an official ICS ROM) and simply rooted it using the same file as above via Odin. That is the part where I did wrong. So this phone won't boot and now I have no idea what the 'code' was. Still, odin mode is accessible.
So, where do I go from here?
Should I make new thread for this? Or is the solution provided here is applicable?
The sgs2 was unbranded aka international version.
Thanks in advance.
Click to expand...
Click to collapse
1. Don't panic!!
Well if your unsure which version it is you may have to try them all
download them here from chainfires post .. i'd probably start at lpq ??
http://forum.xda-developers.com/showpost.php?p=20075898&postcount=8
---------- Post added at 09:38 PM ---------- Previous post was at 09:34 PM ----------
MistahBungle said:
Flash a stock rom via Odin. That will give you a 'clean slate'. Search Intratech's firmware thread, if the links don't work search Samfirmware.com for the stock firmware you need.
Alternatively, you can get the latest firmware for the phone model/carrier/country with the PC version of Checkfus (search for it on here/Google). The firmware package you download can be flashed in Odin following the instructions in Intratech's thread.
Click to expand...
Click to collapse
I seem to be following you around lol not on purpose
I'd wouldn't flash a stock rom "straight off the bat" .. Only I would do that as a last resort!
Flashing the correct kernel will make the phone boot up with NO LOSS of data and all will be back to normal
Flashing a stock ROM will mean you have to start all over again.. (like we do anyway when we flash different custom roms)
So I'm not saying your wrong, just saying try a different kernel first!
Thanks Eudemony, I'll try kernel first. So it seems like there are 2 LPBs and 2 LPQs and all of them about 17 different kernels for ICS. Alright, I'll try LPQ first. But, is it okay to keep on flashing/Odin-ing each and every single of it? Any bad consequences of that? Or side effects? hehe, sounded like i'm trying out new drugs.
ethanmars said:
Thanks Eudemony, I'll try kernel first. So it seems like there are 2 LPBs and 2 LPQs and all of them about 17 different kernels for ICS. Alright, I'll try LPQ first. But, is it okay to keep on flashing/Odin-ing each and every single of it? Any bad consequences of that? Or side effects? hehe, sounded like i'm trying out new drugs.
Click to expand...
Click to collapse
If it is the wrong kernel .. you know the result as you have just done that..
and thats what you are trying to fix
If its the right kernel .. everything should "magically" load back up
ethanmars said:
It was so unfortunate that I'm now in this position, a stuck galaxy s 2 logo with triangle on it.
Earlier today, I rooted an SGS2 of my friend on 2.3.4 using XW_NEE_KI4-42: 2.3.4, CF-Root v4.2, SU 3.0, "insecure" to correspond with the 'KI4' code. After that I flashed it with CM9 and all went well.
Seeing the success, another friend wanted me to do the same to his device. I gladly picked up the phone (which was using an official ICS ROM) and simply rooted it using the same file as above via Odin. That is the part where I did wrong. So this phone won't boot and now I have no idea what the 'code' was. Still, odin mode is accessible.
So, where do I go from here?
Should I make new thread for this? Or is the solution provided here is applicable?
The sgs2 was unbranded aka international version.
Thanks in advance.
Click to expand...
Click to collapse
Seems like you're 'downgrade' your friend's S2... If AP unit then take a look at your friend's S2 box any IMEI or Warranty Card which can identified the phone origin region.. My phone AP unit no problem flashing latest open europe firmware from samfirmware website... Already rooted and no annoying yellow triangle... flash counter zero... thanks triangle away.. In your case once your friend's phone region is identified then download accordingly.. flash the correct firmware via odin... deal with triangle later.. most important ensure your friend's phone working and please avoid softbrick..
IMEI will identify aprox build date and area of release .
Try this checker
http://www.numberingplans.com/?page=analysis&sub=imeinr
jje
Lol.. succeed on the first try.. its LPQ.. phew!! thanks a bunch to both of you for helping me out of this panic attack mode. hehe
ethanmars said:
Lol.. succeed on the first try.. its LPQ.. phew!! thanks a bunch to both of you for helping me out of this panic attack mode. hehe
Click to expand...
Click to collapse
Told ya not to panic!
Not a Problem m8 .. thought it would be LPQ as Malaysia was one of the first countries to get Official ICS and LPQ was the first official one released
Eudemony said:
Told ya not to panic!
Not a Problem m8 .. thought it would be LPQ as Malaysia was one of the first countries to get Official ICS and LPQ was the first official one released
Click to expand...
Click to collapse
Seriously? I didnt know that. Actually, before upgrading his phone (lets call him Z), Y asked me to flash CM9 but then since his phone wasn't yet rooted with 2.3.4 on top, I decided to update using kies to see whats it like to have an official ics (youtube isnt enough, hehe) but to no avail. Kies told me the phones having the latest firmware even though I've updated kies to latest version.. hmmm..
Eudemony said:
Told ya not to panic!
Not a Problem m8 .. thought it would be LPQ as Malaysia was one of the first countries to get Official ICS and LPQ was the first official one released
Click to expand...
Click to collapse
That, yes, that's what I thought too. =)
I was following this: (it is a link)
reviews.cnet.co.uk/mobile-phones/how-to-root-your-samsung-galaxy-s2-50004972/
I have completed step 4. But when it reboots it gets stuck on the reboot screen with the yellow triangle
HELP PLEASE?!
I was told that I need to find my original firmware, and use Odin to install it?
I don't even understand what that is
Can somebody please help me?!
Would be hugely appreciated!
nkianderson said:
I was following this: (it is a link)
reviews.cnet.co.uk/mobile-phones/how-to-root-your-samsung-galaxy-s2-50004972/
I have completed step 4. But when it reboots it gets stuck on the reboot screen with the yellow triangle
HELP PLEASE?!
I was told that I need to find my original firmware, and use Odin to install it?
I don't even understand what that is
Can somebody please help me?!
Would be hugely appreciated!
Click to expand...
Click to collapse
Are you sure you have the GT-I9100 model of Galaxy SII? (check on the label under your battery)
That guide (and this forum) is only for that model.
If your model is NOT GT-I9100, then that is your problem.
Right, go to sammobile.com and sign up. Download a stock ROM for your phone (providing your phone is the GT-i9100). Download Odin and flash the stock ROM. If you don't know how to use Odin, search for Intratechs firmware thread, it tells you. Once flashed the new firmware, go ahead and use Chainfire's CF-Root to root your phone. Job done.
Sent from my GT-I9100 using xda app-developers app
You'll need to flash back the stock kernel or a stock firmware. I've put below some links for the kernels and firmware.
I've uploaded stock kernels here. - Thanks Intratech.
These are the stock firmwares, just look for one for your region.
Rooting guide
http://forum.xda-developers.com/showthread.php?p=28178105
Hi Guys,
Now, I'm not the least bit knowledgeable about rooting, mods, or ROMs, or even what they are. All I know is that the two bottom vibrating keys don't work after I had to reinstall a new screen.So I got the Virtual-Button bar, and ended up rooting my I9300 with CWM and SuperSU and Odin.
It's been working great for a few months. Now here's the problem.
I got a software update today, and I didn't even think about it before downloading it. Then when it rebooted, here is what it says.
Virtual Button Bar: Unable to execute as root
CWM: This version of CWM Manager should be used with CF-Root v.5.0 or newer. It apperas you are running a different kernel. Various features have been disabled. (Current kernel unknown)
SuperSU: has no apps configured, but I have no way of configuring any apps because I dont have the "right-click" touch-button....
Any ideas on what to do??? I need to either unroot and re-root or find a way to fix it....
Thank you so much!
Sounds like you've lost root access. If so, you can try flashing siyah kernel through odin. This kernel has a handy root/unroot option. Also once its flashed, it auto roots your phone. let me know if this works.
Just FYI: this probably happened because the software update flashed the stock kernel which would have unrooted your phone. Flashing siyah should fix your problem
kart_y_26 said:
Sounds like you've lost root access. If so, you can try flashing siyah kernel through odin. This kernel has a handy root/unroot option. Also once its flashed, it auto roots your phone. let me know if this works.
Click to expand...
Click to collapse
could you send me a link to the siyah kernel? and like maybe a step-by-step,nothing fancy. I'm kinda like freaking out ahah
kart_y_26 said:
Sounds like you've lost root access. If so, you can try flashing siyah kernel through odin. This kernel has a handy root/unroot option. Also once its flashed, it auto roots your phone. let me know if this works.
Just FYI: this probably happened because the software update flashed the stock kernel which would have unrooted your phone. Flashing siyah should fix your problem
Click to expand...
Click to collapse
my device status still says "modified"
I'm just trying to do the emergy firmware recovery through Kies. You think that should fix everything?and then I can start from scratch.
melemed said:
could you send me a link to the siyah kernel? and like maybe a step-by-step,nothing fancy. I'm kinda like freaking out ahah
Click to expand...
Click to collapse
Its actually in the original Android development section of this forum, here's the link to the thread: http://forum.xda-developers.com/showthread.php?t=1709686
have a read through the first post on how to install the kernel using odin.
kart_y_26 said:
Its actually in the original Android development section of this forum, here's the link to the thread: http://forum.xda-developers.com/showthread.php?t=1709686
have a read through the first post on how to install the kernel using odin.
Click to expand...
Click to collapse
i read through the first post, where exactly does it say anything about odin? sorry, i'm clueless.
http://galaxys-team.fr/viewtopic.php?t=28516&p=468254
Since my phone came from France, this is the firmware I have now..the new one.
melemed said:
http://galaxys-team.fr/viewtopic.php?t=28516&p=468254
Since my phone came from France, this is the firmware I have now..the new one.
Click to expand...
Click to collapse
Sorry about siyah thread i should have been a bit clearer. here's a link to the dev's website http://d-h.st/users/siyah/s3. from here you can download "Siyah-s3-v1.5.3.tar" this is the one that you can use with odin. From here, assuming you already have odin on you computer, you can put your phone in download mode and flash this kernel.
kart_y_26 said:
Sorry about siyah thread i should have been a bit clearer. here's a link to the dev's website http://d-h.st/users/siyah/s3. from here you can download "Siyah-s3-v1.5.3.tar" this is the one that you can use with odin. From here, assuming you already have odin on you computer, you can put your phone in download mode and flash this kernel.
Click to expand...
Click to collapse
it stopped at "setup connection"
actually since you've already rooted the phone once before. y not to root the phone the same way? i guessing you rooted the phone by using cf root right?
Your problem is that the OTA update flash the stock recovery and kernel. Just reflash CF Root and it should be ok.
Envoyé depuis mon GT-I9300 avec Tapatalk
MisterSkipp said:
Your problem is that the OTA update flash the stock recovery and kernel. Just reflash CF Root and it should be ok.
Envoyé depuis mon GT-I9300 avec Tapatalk
Click to expand...
Click to collapse
lol just did that...and it worked! OK, another question. Are there any cool MOD's or ROM's i can get to make my phone cooler, now that it's working again? or any that you would suggest that I can do through Odin? Thank you SO MUCH!
melemed said:
lol just did that...and it worked! OK, another question. Are there any cool MOD's or ROM's i can get to make my phone cooler, now that it's working again? or any that you would suggest that I can do through Odin? Thank you SO MUCH!
Click to expand...
Click to collapse
Well if you under clock the kernel it will be cooler .
jje
JJEgan said:
Well if you under clock the kernel it will be cooler .
jje
Click to expand...
Click to collapse
I meant like cooler not in the temperature sense.