Related
I have a vibrant and I was rooted my cell phone when the phone's version was 2.1 eclair
I tried to upgrade to 2.2 froyo by official updating
After updating my phone did not show any screen so i tried to return original rom by odin.........
However, odin did not work for the phone... Always stopped when odin tried to install modem.bin.............
And now my phone does not work and even I cannot turn downloading mode or recovery mode........ It is just not work like when the phone's battery is done....
Plz if someone know how to fix it, explain me...........
Not sure what's going on here, but a few more pieces of information might help others figure it out:
First, what ROM were you running? Given the fact that you officially updated, I'm guessing rooted stock? Not sure if this is relevant to your problem, but were you running a lagfix of any kind?
Second, how did you enter Download Mode? Did you select it from a Shutdown menu? Or did you use the Volume buttons while plugging in the phone? EDIT: Forgive my stupidity. You obviously used the buttons, as you entered Download Mode after bricking.
Third, what version of Odin are you using? Did or didn't you select repartition?
Finally, which stock file did you use when restoring?
Take out battery , plug usb into comp. Then while holdin vol up and down plug in usb.
Sent from my SGH-T959 using XDA App
hi
I rooted the phone before I tried to upgrade official update.
And I did not use any custom rom, I just used legfix
And I tried to use T959UVJFD this rom to restore my phone....
and I used odin v1.7
i tried to click or non click repartition both but when I did first trying
I did not check repatition and I used volume down button to join dowloarding mode.
try to Odin with Eugene's froyo that doesn't brick THEN Odin back to stock. Link should be in the Bible thread at the top.
This method has helped me in a brick before.
lol i swear im explainin this second time this issue already today , go hook up your phone to wall cahrger for 5 min , unplug cabole from chsrger and unplug phone from cable hook up cable to computer remove battery from your phone hold vol up vol down hook up usb cable that is already hooked up to computer connect it to phone while still holding vol up vol down bam u got it there if it didnt work hook up phone to wall charger to 10 min instead of 5 trust me i went thru same storry .
i went with every imaginable story of brickin my vibrant lol
i thinkk chance of you brickin that phone to the point that wont ever turn back on is like one in 1000 if not more unles u fried the phone and i dont know id thats possible P
First, make sure you have at least Odin3 v1.3 when attempting this. This version includes a Samsung specific .dll that is required to get a successful load with Odin. Then follow these instructions to flash back to stock.
http://martint.net/2010/how-to-use-odin-to-go-back-to-stock-jfd-2/
from there, just root, install Clockwork Mod Recovery, flash and enjoy.
I used 5 different roms to restore my phone..... but it still stop when odin try to install modem.bin............ I do not understand and very bad.... how can i fix it...
and I tried to find eugene's froyo rom... but I cannot find download link........
plz help me.... I will appreciate every guys......
ss10823 said:
I used 5 different roms to restore my phone..... but it still stop when odin try to install modem.bin............ I do not understand and very bad.... how can i fix it...
and I tried to find eugene's froyo rom... but I cannot find download link........
plz help me.... I will appreciate every guys......
Click to expand...
Click to collapse
Then its odin. Try to find an older version. Yep I said that. I run 1.3 still because it works every single time.
Sent from my SGH-T959 using XDA App
I'm just grasping at straws here, but you might try using every version of Odin (as has already been suggested by several posters above). Also, make sure you remove your SIM and sd card. Lastly, run Odin as an administrator. I don't think the admin part is related, but it can't hurt to try.
Look for Eugene's froyo on Android Spin. I DLed it a few days ago.
Sent from my SGH-T959 using XDA App
I am sorry if this is covered somewhere, I've honestly looked and can't find up to date info on this.
I currently have a Vibrant flashed with CM7.
Right now,
i can't even flash other ROMs for some reason, as they all come up with some sort of compatibility issue when trying to flash the .zip. I think it has something to do with recovery 4.0 being used. it won't let me flash 3.0 (which is pretty silly).
Anyway, I'd like to go back to the latest stock ROM. How exactly should I go about doing this, once I am already on CM7?
power off phone
pull out battery
GRAB THIS STUFF : http://forum.xda-developers.com/showthread.php?t=1047087
turn on odin
attach phone to pc with usb cable
now while holding down both volume buttons put battery back in.
now you should be in download mode and go back to stock with odin from here!
make sure u put the proper .pit and .pda file in there proper places on odin and ur set to go.
Enjoy and also make sure u have the proper samsung drivers
How about just flashing another ROM? Downloaded two 2.2 ROMS and neither of them seemed to flash, complained about some sort of error with the format of the zip file. Didn't make a whole lot of sense...
I am on CM7.
Basically, I am just looking to flash (while already on CM7) a relatively stable ROM that has support for wifi calling. Any suggestions in that area would be much appreciated.
Coming from CM7 you will have to go back to stock if you want to flash a pre-Ginger rom. No way around it. Just follow the guide movieaddict posted and it will get you there.
I recommend Bi-Winning, Project-V, or ZenDroid. But there are plenty of good choices. Good luck.
Sent from my SGH-T959
gsvnet said:
Basically, I am just looking to flash (while already on CM7) a relatively stable ROM that has support for wifi calling. Any suggestions in that area would be much appreciated.
Click to expand...
Click to collapse
CM7 uses MTD/yaffs2 file system which is different from stock Samsung roms. If you don't want to soft brick your phone, I would suggest using the link @movieaddict posted. I know Odin sucks
I must be dense or something, haven't been messing with android devices for a while now, but these directions aren't making a lot of sense to me at all. Didn't know what to do once I had Odin up to be honest. Seems really really complex.
I just need a working stable ROM (could be 2.3 or whatever) with wifi-calling. Will pay someone honestly if they can give me the steps to get there.
did u odin back to stock? or are u having trouble going back to stock? or are u having trouble working ur phone after going to stock??? wht are u having trouble understanding??
I put the phone into download mode and opened odin.exe. From there, I have no clue what to do.
i.e. on the attached screen, what do I do here to get back to a stock ROM?
ok heres wht u do! go to this link:
http://forum.xda-developers.com/showthread.php?t=1047087
now do not extract the pit and tar file, just download them and put them on ur desktop.
now click on pit ON ODIN and u find ur pit fle on ur desktop
Now click on pda ON ODIN and u find ur pda file on ur desktop
Now both of these should be showing these files next to them on odin
now after both the files are in there places under pda and pit
now if ur in download mode and ur phone is hooked up to a usb cable to pc and the files are in there places on odin the top left hand corner box shuld be yellow, The big white box above re-repartition should be yellow.
Now if allthat is correct press start!
just let it go through the process and it will reboot and u will be back to stock.
Just let it sit for like 15 min and will be done, just leave it alone.
ITS REALLY EASY!
NOW IF MY INSTRUCTIONS DONT HELP U! FOLLOW HIS INSTRUCTIONS ON THE LINK ABOVE I GAVE U. THERES A TUTORIAL ON THERE ALSO
I think I'm getting somewhere, currently have the process going. It has been about 10 minutes though, and still got the same "Downloading..." screen
Odin says
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
hasn't shown any other messages yet. Do you think everything is fine?
Nope..pull the plug and you should end up with a soft brick...your phone should turn on to a phone-!-computer screen. Odin should still recognize your phone..so try again.
Don't blame me if it doesn't soft brick..
Sent from my T959 using XDA App
The next time I try this, how do I know that the process is going correctly? Will its how something different on the phone's screen or in Odin?
EDIT: Ok, this time, thinks look a bit better. Have an actual status bar going. Thanks for the tip.
Well it should actually take about 2 minutes so if it finishes in about that time you should be fine.
Sent from my T959 using XDA App
laylovj said:
Nope..pull the plug and you should end up with a soft brick...your phone should turn on to a phone-!-computer screen. Odin should still recognize your phone..so try again.
Don't blame me if it doesn't soft brick..
Sent from my T959 using XDA App
Click to expand...
Click to collapse
And it may not even turn on at all. Don't freak out. Pull out the battery for 5-10 seconds and put it back in. Then hold down Volume up+down while plugging in your usb cable. That should get you back into Download Mode with the yellow triangle. Open Odin back up and you should have a yellow box that says COM and a number. Then press the PDA button and choose the stock JFD file, and then click PIT and load the PIT file. Click start and just let it do its thing until it says PASS and your phone reboots.
Also I've attached version 1.85 of Odin which I find to work the best. Good luck.
Edit: Looks like you already got it started up again while I was typing...
Thanks everyone, was able to get back to factory...now to root again and go for a stable 2.2 ROM.
Thanks for the info.
Hello, I was attempting to flash Clockwork Mod on my G5, whilst doing it Odin crashed and now my phone is messed up.
It will turn on but a PC-Triangle with a ! in the middle-Phone, it will go into Download Mode but Odin doesn't recognise it so i can't re-flash it, any ideas?
Please help, this is urgent.
The phone itself is on stock, it turns on but displays the error i have described above, it will go into download mode but Odin doesn't recognsie it.
Thanks, Curtis.
CurtisAndroid5 said:
Hello, I was attempting to flash Clockwork Mod on my G5, whilst doing it Odin crashed and now my phone is messed up.
It will turn on but a PC-Triangle with a ! in the middle-Phone, it will go into Download Mode but Odin doesn't recognise it so i can't re-flash it, any ideas?
Please help, this is urgent.
The phone itself is on stock, it turns on but displays the error i have described above, it will go into download mode but Odin doesn't recognsie it.
Thanks, Curtis.
Click to expand...
Click to collapse
No need to worry about it.
Uninstall the drivers associated with the phone. Are you using Windows?
For XP: Go to start > Control Panel > System > Click on the Hardware tab and then Device Manager. Find the driver for the phone. I remember it has a yellow icon, and the drivers name is a mix of capital letters
It's probably similar for Windows 7, but i wouldn't know.
Uninstall the driver associated with the phone, then reinstall by plugging your phone into the computer in download mode. It would help to uninstall and reinstall Odin as well, just in case.
If you get Odin to work, just work away like you would.
Thanks for your reply, i have uninstalled the drivers, but when i plugged my phone back in, the drivers are not being installed and i can not find them on the internet. Any ideas?
I know how i messed up, i completely forgot to root my phone before i started to flash, any ideas on how i can just get my phone back to its normal working everyday self?
Will i just need to get the device recognised by Odin then insert the Ops file and the I5500.tar file and flash it back to stock?
edit- managed to get drivers installed, now how do i fix my phone? Just flash the .OPS and the stock I5500.tar file?
CurtisAndroid5 said:
Thanks for your reply, i have uninstalled the drivers, but when i plugged my phone back in, the drivers are not being installed and i can not find them on the internet. Any ideas?
I know how i messed up, i completely forgot to root my phone before i started to flash, any ideas on how i can just get my phone back to its normal working everyday self?
Will i just need to get the device recognised by Odin then insert the Ops file and the I5500.tar file and flash it back to stock?
edit- managed to get drivers installed, now how do i fix my phone? Just flash the .OPS and the stock I5500.tar file?
Click to expand...
Click to collapse
I think it'll fail again if your phone isn't rooted. You can't get rid of the Computer-Caution-Phone image without succesfully using Odin.
You could try to flash the .tar and .ops file again. I can't see it working though unfortunately.
Any ideas then? Is there a way to root my phone via Odin or anything?
CurtisAndroid5 said:
Any ideas then? Is there a way to root my phone via Odin or anything?
Click to expand...
Click to collapse
I've never heard of rooting your phone through the download mode or through Odin.
Maybe there's a file you can put on your phone through Odin which doesn't require root? I'll take a look around for you.
Thank you so much, i appreciate it, I'm 16, can't really live without a phone especially with college parties coming up in the next few days aha, I knew i shouldn't of risked around with flashing again!
CurtisAndroid5 said:
Thank you so much, i appreciate it, I'm 16, can't really live without a phone especially with college parties coming up in the next few days aha, I knew i shouldn't of risked around with flashing again!
Click to expand...
Click to collapse
Just thinking that Odin is a program which requires root so there won't be any file you can transfer when unrooted. I had a quick glance over at the Odin thread, and the first step is that you have to root your phone.
I'm sorry, but there's nothing else I can think of which might help. Maybe if somebody with a bit more knowledge/expeerience sees this thread, they might help.
Can Odin detect your phone?
Ah man, thanks anyway, yes Odin detects my phone, I'm trying to use SuperOneClick Root on my PC- Do you know any other Root software that works on PC?
CurtisAndroid5 said:
Ah man, thanks anyway, yes Odin detects my phone, I'm trying to use SuperOneClick Root on my PC- Do you know any other Root software that works on PC?
Click to expand...
Click to collapse
I don't know of any others, but Superoneclick works fine for the Galaxy 5. Like I said, I've never heard of using it during download mode so just be careful with that.
If Odin detects your phone, have you tried just closing Odin and plugging out the USB safely?
Can't use Superoneclick as my phone isn't in USB Debugging and i obviously can't change that aha I have just tried that, no luck with the closing Odin and unplugging it, should i try installing CWM again or is that a bad idea?
CurtisAndroid5 said:
Can't use Superoneclick as my phone isn't in USB Debugging and i obviously can't change that aha I have just tried that, no luck with the closing Odin and unplugging it, should i try installing CWM again or is that a bad idea?
Click to expand...
Click to collapse
It's a bad idea because it just won't work. Odin will crash again.
I don't know what to do I'm afraid.
Looks like my phone is shagged due to my own stupidity, I forgot to root it because my phone was previously rooted and it went back for repairs, then I completely forgot i didnt install Root access -.-
Do you think i can recover my phone or is it well and truly gone?
Well it's not like your phone is bricked or anything. It's just broken a connection to Odin and it won't boot until it's completed.
You could always return it for repairs again. Your warranty might be broken though.
If I happen to come across a DIY fix then I'll post it here.
Thanks for your help mate, i've decided to just send my phone back for repairs, buy a new phone (Probably a Blackberry for BBM and stuff with all my mates), and sell my phone once i get it back.I have gave up on Samsung mobiles.
Thank you.
Did you send your phone alredy? Uncompress the firmware.tar file and unselect "one package in Odin" . On the boot in odin select the boot file of the .tar and run odin. Maybe that will help
Sent from my Galaxy5 using XDA App
Dude have u tryd using samsung kies it might detect it n let u do an emergancy firmware recovery or maybe (a verry unlikely maybe but still a maybe) it will detect the problem and provide u a solution hope this helps.
CurtisAndroid5 said:
Ah man, thanks anyway, yes Odin detects my phone, I'm trying to use SuperOneClick Root on my PC- Do you know any other Root software that works on PC?
Click to expand...
Click to collapse
Hi, had the very same issue as you. Odin crashed just few sec after start. What I did ; uninstalled everything (Odin & files comes with it, KIES). Then restart PC, go to Samsung.com and download latest KIES, when downloaded go to Tools and check for updates. Accept/run them, when done restart PC. Now, read the steps bellow, and see the attached picture.
1. Extract Odin v4.28 and Ops File.zip I5500XXXX.rar
2. Open Odin v4.28,
- Select OPS tab: EUROPA_v1.0.ops
- Make sure Auto Reboot & Protect OPS selected in Option tab
- get this I5500XFJPQ from samfirware.com ( for some strange reason only this package worked!), download, and unzipp to folder called GT-I5500. In to this folder place Odin and ops as well.
- Make sure One Package selected in Option tab
3. Turn off phone, remove battery for 5second, put it back
4. Hold "Volume Down, Center button & Power button" in the same time to enter Download Mode (yellow triangle)
5. Connect to PC with USB cable
6. When the data line and the phone connection is successful, com port shows yellow in Odin
7. Press Start on Odin
8. Waitin & Pray!
9. PASS, its done!
*Hard reset after flashing *2767*3855#
*Check ur Phone Info *#*#1234#*#*
Note: my i5500 was rooted, so if was yours then ok. When pressing buttons you must see an yellow triangle! If you don't see it don't try connect. Remove battery for 3-5 minutes and try again...
Thanks for the replies, I've got my 'broken' phone in its box on my wardrobe, Carphone Warehouse have ordered me a brand new G5 to replace mine, I should get that sometime next week, but I'm buying a HTC Wildfire S pretty soon anyway!
Thanks for your help, I'd rather keep my broken phone well, broke aha.
Have you tried flashing twrp recovery then using cf-autoroot?
Hello, I am a newbie Android user and I have been exploring the greatness of the OS for few days now.
Just now I tried to update my firmware to 2.3.5 and followed instruction from a non-xda developer site and little did I know, it messed up my phone big time.
While I was loading all the files (CSC, tar, modem, etc), and I should've known better when the site told me to check the "re partition" box, but I was stupid enough to go along with it.
So Odin got stuck at re-writing the modem or something like that and I had to pull out the battery from the phone.
Now the phone turns on only in recovery mode and none of the recovery choices work, if I choose one it just shows a little green android with white bordered triangle with an orange exclamation mark in the middle.
I can still access the download mode by using conventional button pressing method, but my phone is NO LONGER RECOGNIZED through the USB so I cannot flash the old stock firmware...
Is there a fix for this? If anyone can help me resolve this issue I am willing to compensate very well in return...
Thank you so much for reading my convoluted troubled story, and I really hope to find some resolution in your wisdom.
If u can't reflash your farmware
Than their is only one option left
give it to the Samsung service center they will repair your phone
Sent from my GT-S5570 using xda premium
I'd be down to do so but it will be hard as I have 4 custom binary flash counter... What can I do as of now?
i dont know if this helps you out buddy but maybe if you read in this thread you might find people that had the same trouble as you..just try and search the thread first and if nothing comes up try and read the first page maybe there you might get an idea on how to unbrick the phone
http://forum.xda-developers.com/showthread.php?t=1075278
Thank you.. But I unfortunately did not follow the instructions that is written there I used an external source which told me to check "re partition" which completely messed up the phone, I think. Thank you for your input, though.
sfoksn said:
Thank you.. But I unfortunately did not follow the instructions that is written there I used an external source which told me to check "re partition" which completely messed up the phone, I think. Thank you for your input, though.
Click to expand...
Click to collapse
i dont want to advice you wrongly but you say you can get into download mode right? if it was my phone i would try and flash again but this time using the proper way to do it....but its down to you my friend i dont want to say do it and it gets worse..
EDIT: apologies i just saw that your usb is not recognised...do you have kies on the background when you flash with odin?
Check this unbricker
android-roms.googlecode.com/files/DREAIMG-RC29.zip
Download DREAIMG-RC29.zip and unzip the file.
Reformat the SD card to FAT32 and copy the DREAIMG.nbh onto it.
Safely eject the SD card.
Put the SD card into your device.
Step 3: Wipe The Phone
Hold home and press the power button.
When you see the image of an ! mark, open your keyboard and press Alt + L if you cannot see any command options.
Do a factory reset by pressing Alt + W or just using the trackball.
When the reset is done, go ahead and hold the camera button and select the reboot system now option with your trackball.
Step 4: Flashing The Phone
Once the grey screen pops up (or the white screen if your phone was rooted with JesusFreke) it will ask you to hit a button to start installing the image…press that button. DO NOT DO ANYTHING TO STOP THIS PROCCESS. It will take about 8-12 minutes.
When the image has completed the installation (it will say completed), go ahead and press the green, red, and menu buttons at the same time. The phone will reboot.
And your done! Your phone is now unbricked!.
If this helps u buy me a HTC sensation.
debsattam said:
Check this unbricker
android-roms.googlecode.com/files/DREAIMG-RC29.zip
Download DREAIMG-RC29.zip and unzip the file.
Reformat the SD card to FAT32 and copy the DREAIMG.nbh onto it.
Safely eject the SD card.
Put the SD card into your device.
Step 3: Wipe The Phone
Hold home and press the power button.
When you see the image of an ! mark, open your keyboard and press Alt + L if you cannot see any command options.
Do a factory reset by pressing Alt + W or just using the trackball.
When the reset is done, go ahead and hold the camera button and select the reboot system now option with your trackball.
Step 4: Flashing The Phone
Once the grey screen pops up (or the white screen if your phone was rooted with JesusFreke) it will ask you to hit a button to start installing the image…press that button. DO NOT DO ANYTHING TO STOP THIS PROCCESS. It will take about 8-12 minutes.
When the image has completed the installation (it will say completed), go ahead and press the green, red, and menu buttons at the same time. The phone will reboot.
And your done! Your phone is now unbricked!.
If this helps u buy me a HTC sensation.
Click to expand...
Click to collapse
Thanks for such detailed instruction! Would this method work if my phone is no longer recognized by the computer though? Please clarify what you mean by "open your keyboard" and the subsequent steps...
Thank you, once again!
sfoksn said:
Thanks for such detailed instruction! Would this method work if my phone is no longer recognized by the computer though? Please clarify what you mean by "open your keyboard" and the subsequent steps...
Thank you, once again!
Click to expand...
Click to collapse
Yeah it althrough works . Try it its helps he to unbrick ma t mobile oncemay be It works on ur phone to
Sent from my GT-S5570 using xda premium
Ah I see. Could you please help me understand what you mean by "open keyboard?" I just don't see how I could open keyboard on my SGS2 when it isn't recognized by my computer... If you could clarify what you mean by that it will be really appreciated!
So from your information provided, you have a stock recovery and your phone is semi-bricked. You can still boot and your computer won't recognize your phone.
Do you have a jig? What firmware did you flash? You could use a jig to reset the flash counter on the phone and return it for warranty saying that Kies messed up while upgrading firmware. If you've flashed the KI3 with the new bootloader then the jig won't be able to clear the flash counter.
EDIT: Maybe an experienced senior member might come and look at this thread and provide some other solution. Do wait!
EDIT2: Try reinstalling Kies and the drivers. Don't give up just yet!
sfoksn said:
Ah I see. Could you please help me understand what you mean by "open keyboard?" I just don't see how I could open keyboard on my SGS2 when it isn't recognized by my computer... If you could clarify what you mean by that it will be really appreciated!
Click to expand...
Click to collapse
I don't think that the guide he posted is particularly for galaxy s2 because he also mentioned a trackball...
but if you can go the settings he mentioned you might find something and lead you.
And if you decide to bring the phone to samsung you might want to have a read at Intratechs Official firmware
thread in (Original Android Development)there you can find a bootloader that you can flash so you can use the jig to reset the counter
edit: wow I also failed to read that your computer can't recognise your phone
anymore....
Have you tried to delete the samsung drivers when you go to
your hardware settings?? and let windows find it's drivers again?
Not sure if this will help. I read somewhere someone else with their PC not really recognizing the phone. Someone else advised to unplug the phone and remove the battery then connect to PC insert battery and put it into download mode.
I could be wrong with the method. Its just from my memory.
Also this may make no difference but maybe removing the sim and SD card. Someone will probably call me stupid for suggesting that though.
I wouldn't try that unbrick method mate. That looks like it is an unroot for an old phone..possible the G1 (AKA HTC Dream).
Thanks for all the help... I have been trying to uninstall the driver and reinstall it but no luck. If I could just get the phone to be recognized I think I will be fine, but I just don't know what to do
Thank you for all the suggestions, please keep them coming!
EDIT: this is the guide I used that messed up my phone.. http://androidflip.com/install-andr...-samsung-galaxy-s2-gt-i9100-installing-guide/
EDIT: Tried to reinstall KIES, no luck. It's like there's nothing on the other side of the USB cord... Not even a sound when I plug the phone in...
If it had been via XDA the instructions are do not do what they are saying .
In Odin Select Re-Partition , Auto Reboot and F.Reset Time
In Odin select these files
For PIT select u1_02_20110310_emmc_EXT4.pit
BIG BIG NO to the above .
As usual some stuff ripped from XDA and some from elsewhere .
My suggestion would be one buy USB jig it hopefully will clear the rom counter and enter download mode .
two in recovery mode go to mounts and storage and format cache data dalvik system and sd card .
Clean phone with nothing on it .Flash stock firmware .
http://forum.xda-developers.com/showthread.php?t=1075278
If PC does not now recognise phone either try another PC or return phone to service centre and say it failed on a Kies upgrade .
jje
Go through the following steps on your PC or laptop:
1. Go to Start
2. Panel
3. Programs and Features
4. Windows features on or off (then a list compiled, this can take several seconds).
5. Then you see a check stand Microsoft. NET Framework 3.0 or 3.5 (if not, tick)
6. Open the sub folders with the + and then be there for the 3 sub folders a checkmark (if not checked, any configuration takes several minutes)
- Windows Communication Foundation HTTP Activation
- Windows Communication Foundation Non-HTTP Activation
- XPS Viewer
7. Then click OK
8. Now start up your computer.
9. Now you choose to uninstall through Programs and Features
10. Also remove the Samsung USB Driver.
11. Then download the latest version of Kies on the Samsung site and install it.
12. Now launch the program Select Samsung and go to the Tools tab.
13. Then click on drivers.
14. Once this is complete close the Galaxy S2 with the USB cable to your computer.
15. If all is well you now have access to your phone via the USB connection.
If there are any questions, you can leave a response below.
I am not sure if this will help but you might want to have a try. I got this
from a Dutch website. I google translated it for you and hoping you wont
have trouble reading it. This is one of the guides posted when some of us
here couldn't connect our phone with the usb cable.
droidluck said:
Go through the following steps on your PC or laptop:
1. Go to Start
2. Panel
3. Programs and Features
4. Windows features on or off (then a list compiled, this can take several seconds).
5. Then you see a check stand Microsoft. NET Framework 3.0 or 3.5 (if not, tick)
6. Open the sub folders with the + and then be there for the 3 sub folders a checkmark (if not checked, any configuration takes several minutes)
- Windows Communication Foundation HTTP Activation
- Windows Communication Foundation Non-HTTP Activation
- XPS Viewer
7. Then click OK
8. Now start up your computer.
9. Now you choose to uninstall through Programs and Features
10. Also remove the Samsung USB Driver.
11. Then download the latest version of Kies on the Samsung site and install it.
12. Now launch the program Select Samsung and go to the Tools tab.
13. Then click on drivers.
14. Once this is complete close the Galaxy S2 with the USB cable to your computer.
15. If all is well you now have access to your phone via the USB connection.
If there are any questions, you can leave a response below.
I am not sure if this will help but you might want to have a try. I got this
from a Dutch website. I google translated it for you and hoping you wont
have trouble reading it. This is one of the guides posted when some of us
here couldn't connect our phone with the usb cable.
Click to expand...
Click to collapse
Thanks, I tried to do this but unfortunately the problem persists... What do you think the root of the problem is? I just dont' get it why it won't be recognized anymore.. I feel like I could easily get it to work if I could just get it to become recognized to flash stock firmware....
EDIT: JJE, I would turn it into the service place but I have custom rom count of 4 And I don't have any USB jigs to work with either.... I am still within the 15 days of the phone purchase day, would they be willing to swap my phone?
BUMP, any input would be appreciated...
Im trying to rooting my SG2
im already at download mode..
then I plug the usb cable to PC..
I start the odin3 program..
Im in fully control PC as administrator.. but the odin program automatic close when i start it..
and my phone cannot leave the download mode, then i try too take the batere off manually..
until now my phone cannot on like usual..
what should i do???
plz help me fix this problem
thx..
Phone > download mode, then:
Start Odin before you attach the phone/USB to your pc.
Also make sure Kies isn't running, either as program or in system tray.
that the problem..
i start after download mode.. then its happen, the odin start but automatic close.. the my phone still in download mode.. until then i plug off the batere.. and now the phone still die..
my bad sory.. can u help me??
note: now I cannot start the phone, i cant start download mode, i cant charging the phone, PC not detect my phone when i try connect the usb cable.. im really brick it..
to clarify:
can you put Phone in download mode?
if so:
put Phone in download mode
Start Odin before you attach the phone/USB to your pc.
Also make sure Kies isn't running, either as program or in system tray.
Not easy to understand you, sorry. Your phone was stuck in download, you removed the battery, and now the phone is completely dead, is that right?
B3311 said:
Not easy to understand you, sorry. Your phone was stuck in download, you removed the battery, and now the phone is completely dead, is that right?
Click to expand...
Click to collapse
yes correct..
I can only suggest leaving the battery out a little longer and then trying again - download mode -later. Worked for me before on my SGS1 once.... What were you trying to flash?
B3311 said:
I can only suggest leaving the battery out a little longer and then trying again - download mode -later. Worked for me before on my SGS1 once.... What were you trying to flash?
Click to expand...
Click to collapse
im sory.. im newbie.. what is flash meaning??
i just see from youtube about rooting the phone.. then im trying to do the same
thank you very much.. im try your advice.. i will ask you again when its nothing happen.. sory..
No need to be sorry I don't know which root method you're trying, but "flashing" here means whatever you're trying to put on your phone with Odin. What was the name of the file you opened with Odin? Also have a good read of the root bit in my signature.
B3311 said:
No need to be sorry I don't know which root method you're trying, but "flashing" here means whatever you're trying to put on your phone with Odin. What was the name of the file you opened with Odin? Also have a good read of the root bit in my signature.
Click to expand...
Click to collapse
i will read it.. thx
sory.. but when i start odin.. its suddenly close again.. so my phone stuck in download mode.. im not yet open any file..
btw.. the phone still not start.. any advice??
Odin and whatever you're trying to flash can wait - gotta get your phone working again, but it doesn't look good at the moment...
You cannot turn your phone on at all, right? Not download, not recovery, not normal startup?
Does anything happen when you connect the battery charger?
thxx
B3311 said:
Odin and whatever you're trying to flash can wait - gotta get your phone working again, but it doesn't look good at the moment...
You cannot turn your phone on at all, right? Not download, not recovery, not normal startup?
Does anything happen when you connect the battery charger?
Click to expand...
Click to collapse
THX U... THX.. THX.. THX....
my phone live.. live!!!...
thx u...
but im still want to try to root.. its any safer way??
tp.wicaksono said:
THX U... THX.. THX.. THX....
my phone live.. live!!!...
thx u...
but im still want to try to root.. its any safer way??
Click to expand...
Click to collapse
Root + CWM .
http://forum.xda-developers.com/showthread.php?t=1103399
Read the instructions in full .
jje
Good. As jj said, follow that guide - every letter - and you should be OK.
Let us know how you get on.
Unzip the attached CF-Root-xxx-vX.X.zip.. then comes out CF-Root-xxx-vX.X.tar
?? right?
but why CF-Root-SGS2_XW_CLK_KF3-v4.0-CWM4.rar.. and when I extract comes out zImage with 8,192kb??
is it correct or i should change the name??
coz its say nothing about it???
You don't need to extract to the zimage yet, one step at a time!
Unzip the rar, load the .tar on Odin. Sounds like you've extracted the original file twice.
Edit - KF3 is old, but carry on with it, you need to practice before you flash new firmware.
CWM step stuck
before this step im okay
but, this one im not understand..
Instructions - If you already have CF-Root
- Copy the zip file to your SD card(ok)
- Stop sharing SD card with computer over USB, unplug the cable, etc(ok)
- Applications -> CWM -> Flash kernel. Select the ZIP file on your SD card.( i cant find in my applications, but there are cwm icon in menu along with superuser.. what should i do? or its the correct one??)
- Done
Sounds like you're rooted now, you get options when you press the cwm icon?
thx.. its rooted now..
hehe.. very good guide.. thx..
i will ask u if any other problem
tp.wicaksono said:
thx.. its rooted now..
hehe.. very good guide.. thx..
i will ask u if any other problem
Click to expand...
Click to collapse
Glad you got it sorted