[SOLVED] I'm going crazy! - Sony Ericsson Xperia Mini, Mini Pro, Xperia Pro, A

I've been trying to install HYBROM v10 all day!
I thing I'm missing some step because yesterday I did it with no problems at all.
I got stuck after installing via CWR on the SE logo.
After stucking I can't access CWR anymore.. here's what I do after that:
Using flashtool:
-flash 4.0.2.A.0.58
-root
-CWR
-stock kernel
-tried to flash Hybrom- fail.
-KRsH kernel using fastboot
-tried to flash Hybrom - fail.
Am I missing something?
Xperia Mini Pro
_______________________________________
Using flashtool:
-install .368
-root
-CWM
-rage/hybrom kernel
-installing hybrom:
-full wipe data/cache
-wipe dalvik
-install rom
-shutdown
-full wipe
-install rom
-restart (if stuck, run fastboot and flash boot again, restart)
success.
This is my second thread today without replays but still solved...
Why no one replies to me?

Related

Help on custom kernel

I have unlocked my bootloader properly.I am on prerooted stock kernel and WB v4.I am trying to install WBv5 custom kernel on it.After flashing my phone doesnt boots up.It gets stuck on bootscreen.Can any one guide me to the correct method to get it work?
Thanks
Try install wb stock kernel version.
Its work great here.
Custom kernel in unlocked BL still have deepsleep issue, thats why i advice you to flash doom advance stock and wolf stock version.
Sent from my X10i using XDA App
I have a similar problem. I think my phone is incompatible with DoomKernel. What I did was flash a different custom kernel and so far it's working okay.
Hi guys, I advice to restart all in zero.
http://forum.xda-developers.com/showthread.php?t=936733
1. Flash 2.3.3 with flashtool 3.0.0
http://forum.xda-developers.com/showthread.php?t=920746
2. Flash with downgrade kernel and start you phone then root after reboot remove battery.
http://azuzu.spice.net.au/tools/X10_GB_Root/X10_aZuZu_Kernel_Downgrade_Generic.ftf
3. Flash with Upgrade kernel.
http://azuzu.spice.net.au/tools/X10_GB_Root/X10_aZuZu_Kernel_UpGrade_Generic.ftf
4. Install xrecovery 0.3 choose 0.3GB
5.Install WB 0.5, factory Reset (Full wipe), wipe Cache Partition, wipe Dalvik Cache, reboot
http://forum.xda-developers.com/showthread.php?t=1192988
6.Flash Doomkernel (choose overclocked or not. Warning : Overclocked drain a lot battery).
Flash via recovery wifi modules(If you change rom, you must to flash wifi module after install your rom)
http://forum.xda-developers.com/showthread.php?p=17526480#post17526480
Factory Reset (Full wipe), wipe Cache Partition, wipe Dalvik Cache and battery stats.
Asgarth974 said:
Hi guys, I advice to restart all in zero.
http://forum.xda-developers.com/showthread.php?t=936733
1. Flash 2.3.3 with flashtool 3.0.0
http://forum.xda-developers.com/showthread.php?t=920746
2. Flash with downgrade kernel and start you phone then root after reboot remove battery.
http://azuzu.spice.net.au/tools/X10_GB_Root/X10_aZuZu_Kernel_Downgrade_Generic.ftf
3. Flash with Upgrade kernel.
http://azuzu.spice.net.au/tools/X10_GB_Root/X10_aZuZu_Kernel_UpGrade_Generic.ftf
4. Install xrecovery 0.3 choose 0.3GB
5.Install WB 0.5, factory Reset (Full wipe), wipe Cache Partition, wipe Dalvik Cache, reboot
http://forum.xda-developers.com/showthread.php?t=1192988
6.Flash Doomkernel (choose overclocked or not. Warning : Overclocked drain a lot battery).
Flash via recovery wifi modules(If you change rom, you must to flash wifi module after install your rom)
http://forum.xda-developers.com/showthread.php?p=17526480#post17526480
Factory Reset (Full wipe), wipe Cache Partition, wipe Dalvik Cache and battery stats.
Click to expand...
Click to collapse
If you have an unlocked bootloader, then you don't need azuzu's rooting method, just simply flash the doom kernel v5 through flashtool then install your favourite custom rom.
Sent from my X10i using XDA App

Custom Rom Installing Problem

I'm trying to install a KA07 Xperia SSpeed Rom.
But i stuck at boot animation.
What i did?
Unlocked the Bootloader.
Flashed Xperia S .76 FTF.(It is booting).
Then flashed the Advance stock kernel form DOOMLord.
Booted into .76 FW,its working.
Then Rebooted into recovery.
Wiped Dlavik Cache.
Wiped Factory Reset.
Installed KA07_Xperia_SSpeed.zip
But it stuck at boot animation.
Why?
hello (and sorry for my bad english)
try this (that's what i do and it's ok) :
-flash76 ftf with flashtool and reboot for a while (10mn, try if all is ok)
- flash 76 preroot with fastboot and reboot for a while...
- install doom kernel (v1a, wifi modules, etc...v4a...aroma..) and boot for a while
-boot in doom recovery for wipe dalvik cache and install ka07 with aroma...
-boot for a while, try the rom,
-boot in recovery and format cache, wipe dalvik
I have done this and , for my phone, all is ok...
I have read some people have installed first the ka6 then ka7...
I wish it can help you...

[Q] Total noob, stuck at Sony logo after flashing ROM

Hey, I hope I can get some help here. I'm a total noob and I don't know if other similar threads apply to me. Anyway, I have a rooted Xperia Neo V, with ICS 4.0.3 and I used ROM Manager app to casually flash the "Xperia Pureness" ROM I downloaded. I didn't do a full wipe because I was too stupid to look at the instructions. Is this fixable?
download this kernel http://forum.xda-developers.com/showthread.php?t=1566871
read this how to how to install kernel...
http://forum.xda-developers.com/showthread.php?t=1409269
if u do not get it post your queries
Xperia Neo V stuck at SONY logo
hey i also have the same problem. I forgot to wipe dalvik cache. Stuck at SONY logo. I havent unlocked my bootloader , so can i flash kernel mention in the above post.
skral said:
hey i also have the same problem. I forgot to wipe dalvik cache. Stuck at SONY logo. I havent unlocked my bootloader , so can i flash kernel mention in the above post.
Click to expand...
Click to collapse
you can install roms that can be installed on unlocked bootloaders....read this http://forum.xda-developers.com/showthread.php?t=1313445
can you get into CWM ??
samneov said:
download this kernel http://forum.xda-developers.com/showthread.php?t=1566871
read this how to how to install kernel...
http://forum.xda-developers.com/showthread.php?t=1409269
if u do not get it post your queries
Click to expand...
Click to collapse
Thank you. At some point the instructions require that I enter *#06# on my phone but I can't boot, it gets stuck at the Sony logo. Is this step necessary?
as can be interpreted u have a unlocked bootloader( i guess that's right)
you can try to use Sony Ericssion Update service to restore your phone to ICS
read this 1. http://communities-origin.sonyericsson.com/message/176189
and this 2.http://talk.sonymobile.com/thread/30938
see if it helps
I used SEUS to install stock rom . Now its working but all apps are gone.
so i can install any custom rom? Also did this happen because i didnt wipe dalvik cache bfore installing the rom.
samneov said:
you can install roms that can be installed on unlocked bootloaders....read this http://forum.xda-developers.com/showthread.php?t=1313445
can you get into CWM ??
Click to expand...
Click to collapse
skral said:
I used SEUS to install stock rom . Now its working but all apps are gone.
so i can install any custom rom? Also did this happen because i didnt wipe dalvik cache bfore installing the rom.
Click to expand...
Click to collapse
Ya ..you can install custom ROMS now i hope u hv boot loader unlocked ..head over to the Neov development section and download the ROM you want ..Follow the instructions really carefully while installing ROMS
And the answer of your second question is NO. When installing stock ROM or repairing it all apps and setting are gone nothing to do with wipe dalvik cache
Problem persists
So i tried installing pureness once more, this time i made sure i wiped davik cache. Same problem stuck at SONY and so had to revert to stock once more. I havent unlocked BL yet. Is it necessary for installing Pureness. Also can somebody tell me if i am doing it right.
1) used flash tool to downgrade to .562
2)rooted using Doomlords tool
3)Used flash tool to upgrade back to .431
4)Installed cwm auto installer apk from google play
5)Installed cwm
6)Booted into recovery
7)Made a backup
8)Used install from zip option to install Pureness
9) reboot and its stuck
Cant even access cwm since its stuck at that point , so i cant use the backup also right.
First, flash a specific kernel for that ROM.. Look for the link for kernels in the above post!
Flash the kernel first.. Reboot into recovery... Wipe data, wipe cache partition, wipe dalvik cache... And then install zip from sd card!
Reboot your phone! You'll be done now!
flashing kernel
I am guessing for flashing the kernel , i have to unlock bootloader.
You didn't unlock your bootloader?!
You definitely can't flash a custom kernel without unlocking it!
I suggest you go with the official Sony's way..
http://unlockbootloader.sonymobile.com/
BL
but that will void my warranty right and i will no longer be able to use SEUS for reveting to stock.
Yea.. That would void your warranty!
But unlocking the bootloader will allow to install custom ROMs which shall be very fast and smooth as compared to the stock one... and I don't think you'll revert back to stock!
Though relocking can be done but you won't be able to update your phone through over the air updates!
It's your choice!
1. Unlock bootloader using sony's,
Method
2. Flash the custom kernel
3. Get into CWM
4.wipe delvic/data/battery stat
5. Install custom rom
6. Install gapps(if necessary)
7.wipe delvic
8. Reboot
That are common steps
Also use the recommended kernel by the developer
Also follow his instruction...if in doubt serch if still confused post here
Sent from my MT11i using xda app-developers app
Mods ftw
I dont want to unlock bootloader now. Presently having fun with different mods . Once i get tired of them , will try unlocking. Please suggest some useful mods.Currently installed Romcontrol by jjdoctor and walkman for ICS by thilinac.
SAMPLE TUTORIAL
I-SCREAM-11i + Night-Elf kernel RC5 tutorial
================================================== =========
requirement: unlock bootloader
================================================== =========
download I-Scream_official_431.zip [copy to sd card]
download I-Scream_official_431_update.zip [copy to sd card]
download I-Scream_restore_vdd_level.zip [copy to sd card]
download FASTBOOT [extract to PC]
download kernel [boot_ics_v1_rc5.img]
copy/paste it to fastboot folder
rename it to boot.img
open cmd window(by pressing shift+right click mouse & open command window)
turn off phone,connect phone to pc by pressing settings button (now led will turn on will lit blue) [PdaNetA350x64 for 64BIT OS driver]
paste this in cmd - fastboot flash boot boot.img
press enter
================================================== ======================================
- reboot into recovery [power button then repeatedly press volume up]
- [wipe cache partition, advance wipe dalvik cache]
- install zip from sdcard I-Scream_official_431.zip
- install zip from sdcard I-Scream_restore_vdd_level.zip
- reboot into system
LED Flash not working
I was trying out some of the mods (ROM Contol and Walkman music for ICS) and now the LED flash is not working and camera image is upside down. Any idea why?
skral said:
but that will void my warranty right and i will no longer be able to use SEUS for reveting to stock.
Click to expand...
Click to collapse
even if u unlock u r boot loader you would be able to use SEUS....i did so when my phone simple stopped responding after flashing certain kernel
skral said:
I was trying out some of the mods (ROM Contol and Walkman music for ICS) and now the LED flash is not working and camera image is upside down. Any idea why?
Click to expand...
Click to collapse
please read the related threads carefully ....use search.....usually there is a solution given.....else it is a bug which will be fixed in the next release....do a little digging:laugh:
basically i have the same problem.. (neo)
already unlocked bootloader.. apply nightelf kernel successfully..
step i do:
- backup in CWM
- reboot into recovery [power button then repeatedly press volume up]
- [wipe cache partition, advance wipe dalvik cache]
- install zip from sdcard Xperia_Ice_Cream_Pureness_build_3_NeoV.zip
- install zip from sdcard Neo_patch_for_Xperia_Pureness_build_3.zip
- reboot into system
still stuck at sony logo.. then i remove battery, try to boot into cwm..
it still works!
but the cwm background pic changed with wording "CWM-based recovery v5.0.2.7 Full (by DooMLoRD)".. not like before..
so.. got any idea or solution? thx in advance...

How to upgrade from FXP132 to FXP 133, Xperia S

I wonder what is the safest way to upgrade the rom from FXP132 to 133 in my Xperia S. Do i have to reflash the kernel and install gapps again???
Thanks for help
After alot of retries the only working combination is the follow:
-format system
-wipe data/factory
-wipe dalvik
-install CM9
-install gapps
-turn off phone
-boot phone to fastboot mode
-flash the extracted boot.img using fastboot
Check out my post here, it's just a quick guide on how to upgrade to 133 from 132 without losing data, hope I helped :good:

Xperia x8 Custom ROM

I installed Shin Engine v3 and SE V5 but both dont worked. I followed that steps:
"Installation
Download Rom and copy to Sd card
Reboot into CWM Recovery
enter Mount and Storage -> /format system
Wipe data/factory reset -> Wipe cache partition enter Advance -> /wipe dalvik cache /wipe battery stats
Flash ROM = wait until finish
Reboot. Done". That you can get it here. "http://forum.xda-developers.com/showthread.php?t=1551522"
I unlock root and bootloader, installed nAa 11 Kernel.
Then after I install the rom I reboot and then the cellphone keep rebooting infinitely.
What can I do?
Flash Alfs v08a CM7 no FPS cap version(optional, but always working+better performance). I tried these ROMs and they worked. However, if you use an ICS ROM like ShinEngine V3(not BostonEngine v5), you MUST use nAa ICS kernel!! Otherwise it won't work for you. If you have the correct kernel, correct ROM and still not working, try reflashing the ROM and NOT wiping everything and vice versa.
Good luck!

Categories

Resources