Yet again following this guide: http://forum.xda-developers.com/showthread.php?t=1239821
I did every step in order, but when i get into TWRP, then choose "Install Zip". After i choose "Choose Zip To Flash" i select "su-2.3.6.3.zip"
I get this:
Code:
Mounting SYSTEM...
Deleting SYSTEM:bin/su...
Deleting SYSTEM:xbin/su...
Extracting files to SYSTEM...
Setting SYSTEM:bin/su permissions to 6755...
Creating SYSTEM:xbin/su symbolic link...
E:Error in /tmp/sideload/package.zip
(Status 0)
Why did i get that error and is there anyway i can fix it?
When i reboot my phone it says it just had an "abnormal reset"
xRemy said:
Yet again following this guide: http://forum.xda-developers.com/showthread.php?t=1239821
I did every step in order, but when i get into TWRP, then choose "Install Zip". After i choose "Choose Zip To Flash" i select "su-2.3.6.3.zip"
I get this:
Code:
Mounting SYSTEM...
Deleting SYSTEM:bin/su...
Deleting SYSTEM:xbin/su...
Extracting files to SYSTEM...
Setting SYSTEM:bin/su permissions to 6755...
Creating SYSTEM:xbin/su symbolic link...
E:Error in /tmp/sideload/package.zip
(Status 0)
Why did i get that error and is there anyway i can fix it?
When i reboot my phone it says it just had an "abnormal reset"
Click to expand...
Click to collapse
I would use cwm as recovery twrp 2.0 has issues. Abnormal reset is normal on stock roms click it tell it not to send . Then go to about phone in menu click it on the top click tell HTC click it shut off the bug report and send thing . This will stop the abnormal reset message .
reaper24 said:
I would use cwm as recovery twrp 2.0 has issues.
Click to expand...
Click to collapse
Alright could you give me a link to it?
Also how would i remove TWRP from my sd card?
xRemy said:
Alright could you give me a link to it?
Also how would i remove TWRP from my sd card?
Click to expand...
Click to collapse
If you just flashed it in boot there is nothin to remove . When you flash cwm it will over write twrp here u go http://forum.xda-developers.com/showthread.php?p=14693680 cdma shooter EVO 3d one
okay so i did what you said and booted CWM.
And i get this error:
Code:
E:Error in /sdcard/2.3.6.3.zip
(Status 0)
Installation aborted.
Do you think there is something wrong with my .zip file?
xRemy said:
okay so i did what you said and booted CWM.
And i get this error:
Code:
E:Error in /sdcard/2.3.6.3.zip
(Status 0)
Installation aborted.
Do you think there is something wrong with my .zip file?
Click to expand...
Click to collapse
Ya zip maybe bad did you try to flash in recovery? I just download it from the market or I just flash a rom that has it in it. I have been using fresh rom smooth battery life is grand.
So i installed Scott's CleanROM today no problems, thanks for the help
Related
E: failed to verify whole-file signature
E: signature verification failed
Installation aborted.
It gives me this when I try and backup and when I try to load update.zip on it, what should I do?
d12183 said:
E: failed to verify whole-file signature
E: signature verification failed
Installation aborted.
It gives me this when I try and backup and when I try to load update.zip on it, what should I do?
Click to expand...
Click to collapse
are you sure you are in CWM?? On the top does it say ClockWorkMod 2.5.1.0? That and what update.zip are you trying to install?
same errors here... and im definitely in ClockWorkMod...it says latest version is 2.5.1.0
wasupwithuman said:
are you sure you are in CWM?? On the top does it say ClockWorkMod 2.5.1.0? That and what update.zip are you trying to install?
Click to expand...
Click to collapse
Yes I'm sure, and I was trying to do the d101 update, and this also shows up when I try and do a backup
If you havent already download Rom Manager and reflash CWM. Soemtimes people tell you to flash an older version then reflash the newest version.
dlongb13 said:
If you havent already download Rom Manager and reflash CWM. Soemtimes people tell you to flash an older version then reflash the newest version.
Click to expand...
Click to collapse
Alright I'll try that, and I just realized I can't do the nandroid either because of the same error
dlongb13 said:
If you havent already download Rom Manager and reflash CWM. Soemtimes people tell you to flash an older version then reflash the newest version.
Click to expand...
Click to collapse
Whenever I try to install an older version, I get a message saying "An error occurred while downloading your recovery" I've tried it on 3G and Wifi, and I can download other things just fine.
Do you have the update.zip for CWM still on your sdcard? If so reboot into recovery using the power and volume key, it should take you to the Samsung recovery, then go to apply update.zip.
dlongb13 said:
Do you have the update.zip for CWM still on your sdcard? If so reboot into recovery using the power and volume key, it should take you to the Samsung recovery, then go to apply update.zip.
Click to expand...
Click to collapse
I just get sent back to CWM and I get the same error. Would removing ROM Manager remove CWM?
In order to have a fully working rom manager, you have to flash the clockworkmod.tar kernal. I was having the exact same issues, I couldn't do a backup or restore. You will have to do odin on your phone.
magicriggs said:
In order to have a fully working rom manager, you have to flash the clockworkmod.tar kernal. I was having the exact same issues, I couldn't do a backup or restore. You will have to do odin on your phone.
Click to expand...
Click to collapse
Exactly.
You cannot install CWM without odin / redbend / etc. There are no shortcuts. Just downloading ROM Manager and hoping that you're special or lucky is not enough to make this work.
Follow the instructions.
I guess I had assumes he had already done that.
how to install install Jelly_Bean_Extras_HomICS_2.0_Venus.zip?
moshe1974 said:
how to install install Jelly_Bean_Extras_HomICS_2.0_Venus.zip?
Click to expand...
Click to collapse
flash it in recovery
I get an error message
cant open sdcard/jelly_bean_extras__homics_2.0_venus.zip
(bad)
installation aborted.
moshe1974 said:
cant open sdcard/jelly_bean_extras__homics_2.0_venus.zip
(bad)
installation aborted.
Click to expand...
Click to collapse
link fixed, download it again
thx
I think your file error!
Redownload it.
Hi,
i've tried to install this rom on my x10i http://forum.xda-developers.com/showthread.php?t=1782771 but when i choose the file in cmw5 and hit install it says E:Error in /sdcard/XPERIA S ICS AOPK.zip (status 7) installation aborted.
before this ive unlocked the bootloader as this thread write: http://forum.xda-developers.com/showthread.php?t=1254087 and i think it was successful because i can flash this kernel http://forum.xda-developers.com/showpost.php?p=28126178&postcount=1566
and the SE logo disappeared.
what did i do wrong?? please help me! thanks!
qvasz said:
Hi,
i've tried to install this rom on my x10i http://forum.xda-developers.com/showthread.php?t=1782771 but when i choose the file in cmw5 and hit install it says E:Error in /sdcard/XPERIA S ICS AOPK.zip (status 7) installation aborted.
before this ive unlocked the bootloader as this thread write: http://forum.xda-developers.com/showthread.php?t=1254087 and i think it was successful because i can flash this kernel http://forum.xda-developers.com/showpost.php?p=28126178&postcount=1566
and the SE logo disappeared.
what did i do wrong?? please help me! thanks!
Click to expand...
Click to collapse
In the ZIP file (Meta-inf -> com -> Google -> Android) there is a file updater-script, you need to edit this file with notepad or similar. You need to get rid of the first line which has lots of "props" , so the first thing that stays there is : package_extract_file blabla
egerth said:
In the ZIP file (Meta-inf -> com -> Google -> Android) there is a file updater-script, you need to edit this file with notepad or similar. You need to get rid of the first line which has lots of "props" , so the first thing that stays there is : package_extract_file blabla
Click to expand...
Click to collapse
i did it but it says now E:Error in /sdcard/xperia s ics aokp.zip (status 6) installation aborted. :S
qvasz said:
i did it but it says now E:Error in /sdcard/xperia s ics aokp.zip (status 6) installation aborted. :S
Click to expand...
Click to collapse
Use different recovery, that might solve your problems.....
Sent from my Transformer TF101 using xda app-developers app
udupa82 said:
Use different recovery, that might solve your problems.....
Sent from my Transformer TF101 using xda app-developers app
Click to expand...
Click to collapse
ive tried the xrecovery but i got the same error message. but i cant install any rom with 4.0 :/
i write down what i already did, cuz i might forgot something,
first i unlocked the bootloader as i said then
i flashed the kernel with flashtool, then
i did a full wipe and then try to flash the rom.
Try this?
If you have unlocked Bootloader (Checked through S1tool that you have unlocked bootloader, and have such flashing errors, try this
1.Try flash KCernel V3 here via flashtool since got multiple recoveries. You will get KCernel Logo shows once powered on.
2.Got Backed Up Locked Bootloader stock ROM data? Restore it back from similar xrecovery you used, compared to Kcernel's
3.You will get bootanimation of your previous ROM, bootloop, so won't get homescreen reached.
4.Take Off battery for few seconds, and then power it on
5.Get back to CWM Recovery and make full wipe, clear dalvik cache:
6.Flash your 4.0 ROM zip
7.Should work normally...
I tried before and worked Just share my little past experience though I'm now in AOKP ICS. Hope helps
whitefang
Ok thanks for everybody now its working fine i flashed the stock 2.3.3 rom then root my phone again and then flash the kernel and the rom so its all good
Sent from my Xperia X10 using xda app-developers app
Hello,
Recently rooted my phone with CF-root and installed the nightly build of Cm10. I took the zip-file into my "download" in the interntal memory and went to recovery. When i click the file and start downloading it(after factory reset, cach e.t.c) i get an "installation aborted". Its a long text over "Installation aborted" that i dont understand I have done this to me s2 before(cm9), and i cant understand what im doin wrong.
Please help me. Want to figure this out before i go to bed . Need my phone.
Thank you!
somebody help me??
Well what you have written does not give any information about the error..
Maybe it was a bad download.. Just downloaded it again and check the md5..also if the the problem persists.. Try to put the exact message here.. You can get it in the cache partition as lastinstall.txt..
By the way I am typing from my phone.. So expect typos!!
zoot1 said:
Well what you have written does not give any information about the error..
Maybe it was a bad download.. Just downloaded it again and check the md5..also if the the problem persists.. Try to put the exact message here.. You can get it in the cache partition as lastinstall.txt..
By the way I am typing from my phone.. So expect typos!!
Click to expand...
Click to collapse
Thank you for answering !
I have tryed many different builds in CM10, so its not a bad download.
The error i am receiving is following : asser failed: getprop("ro.product.device") == " Under this it says the same as i just wrote. Then it says : E=Error in /sdcard/cm-10-20120913-NIGTHLY-d2att.zip
(Status 7)
Installation aborted.
I am running CWM-based recovery v5.5.0.4 with CF-v1.3 root
heeelp
Smurflin96 said:
Thank you for answering !
I have tryed many different builds in CM10, so its not a bad download.
The error i am receiving is following : asser failed: getprop("ro.product.device") == " Under this it says the same as i just wrote. Then it says : E=Error in /sdcard/cm-10-20120913-NIGTHLY-d2att.zip
(Status 7)
Installation aborted.
I am running CWM-based recovery v5.5.0.4 with CF-v1.3 root
heeelp
Click to expand...
Click to collapse
Tell me something, do you have an international galaxy S3, if yes then I believe you are downloading the wrong CM10 file, go to this page and then download the file..
The error is saying that your device check is failing..if your device check fails even after you use the linked file then using 7zip open up the file, go to META-INF>com>google>android>updater-binary and open it using Notepad++ delete the 2 lines starting from assert_check(getprop("ro.product.device") ..
Save the file and then try to flash..however in my opinion you are flashing the wrong file as the 13-09 file does not have cm-10-20120913-NIGTHLY-d2att.zip in its name..
I got clockwork mod 6.0.3.1 installed on a Galaxy S3 but I can't install CM... and I can't boot back onto my original rom. If I restart my phone, it just goes into Clockworkmod, I don't have to hold power + home + up for CWMod... So CWMod is the only thing I can get to, in addition to the download mode (Vol down + power + home).
If I apply Cyanogenmod11.zip through clockwork, it says
(Status 7)
OR
Installation aborted.
No additional information, just "installation aborted". Really sucks....
Now I get status 7 or install aborted depending upon the .zip I use. I've tried nightlys and stables, neither work. ANY HELP APPRECIATED!
Observer0 said:
I got clockwork mod 6.0.3.1 installed on a Galaxy S3 but I can't install CM... and I can't boot back onto my original rom. If I restart my phone, it just goes into Clockworkmod, I don't have to hold power + home + up for CWMod... So CWMod is the only thing I can get to, in addition to the download mode (Vol down + power + home).
If I apply Cyanogenmod11.zip through clockwork, it says
(Status 7)
OR
Installation aborted.
No additional information, just "installation aborted". Really sucks....
Now I get status 7 or install aborted depending upon the .zip I use. I've tried nightlys and stables, neither work. ANY HELP APPRECIATED!
Click to expand...
Click to collapse
Download cwm 6.0.4.4. put phone into mas storage mode via cwm. put 6044 on phone memory. then flash update.zip then flash cm11
suburbadroid said:
Download cwm 6.0.4.4. put phone into mas storage mode via cwm. put 6044 on phone memory. then flash update.zip then flash cm11
Click to expand...
Click to collapse
Putting 6044 on my phone using Heimdall, I get
ERROR: Failed to send file part packet!
ERROR: RECOVERY upload failed!
Ending session...
ERROR: Failed to send end session packet!
Releasing device interface...
can u boot into download mode?
TheAwesomeBit said:
can u boot into download mode?
Click to expand...
Click to collapse
Yes.
Use Odin and try again.
andrewwright said:
Use Odin and try again.
Click to expand...
Click to collapse
This.
Install Stock Recovery, and stock firmware using ODIN.
Try this guide.. Has been useful to me. Alot. Cheers..
http://forum.xda-developers.com/showthread.php?t=2323847
TheAwesomeBit said:
This.
Install Stock Recovery, and stock firmware using ODIN.
Try this guide.. Has been useful to me. Alot. Cheers..
http://forum.xda-developers.com/showthread.php?t=2323847
Click to expand...
Click to collapse
I can't reset binary counter because I can't go into my "desktop" so to speak. I only have two access points on the phone, the download mode and ClockworkMod.
2. Flash Stock Recovery
I am stuck at downloading my StockRecovery, because the US Cellular variant is not listed. I have looked and looked and looked everywhere and can't find stockrecovery for US Cell.
Observer0 said:
I can't reset binary counter because I can't go into my "desktop" so to speak. I only have two access points on the phone, the download mode and ClockworkMod.
2. Flash Stock Recovery
I am stuck at downloading my StockRecovery, because the US Cellular variant is not listed. I have looked and looked and looked everywhere and can't find stockrecovery for US Cell.
Click to expand...
Click to collapse
Okay, so we can worry about the binary counter later. Whats the model no. of your phone?
Also, why don't you try flash official firmware leaving the recovery as it is.
Observer0 said:
I can't reset binary counter because I can't go into my "desktop" so to speak. I only have two access points on the phone, the download mode and ClockworkMod.
2. Flash Stock Recovery
I am stuck at downloading my StockRecovery, because the US Cellular variant is not listed. I have looked and looked and looked everywhere and can't find stockrecovery for US Cell.
Click to expand...
Click to collapse
The fact u say your US variant isn't listed is a bit worrying, you know this is a forum for the international GalaxyS3 and the US versions have there own forum and ROMs?
Sent from my GT-I9300 using XDA Premium 4 mobile app
i think you can fix
Observer0 said:
I got clockwork mod 6.0.3.1 installed on a Galaxy S3 but I can't install CM... and I can't boot back onto my original rom. If I restart my phone, it just goes into Clockworkmod, I don't have to hold power + home + up for CWMod... So CWMod is the only thing I can get to, in addition to the download mode (Vol down + power + home).
If I apply Cyanogenmod11.zip through clockwork, it says
(Status 7)
OR
Installation aborted.
No additional information, just "installation aborted". Really sucks....
Now I get status 7 or install aborted depending upon the .zip I use. I've tried nightlys and stables, neither work. ANY HELP APPRECIATED!
Click to expand...
Click to collapse
The error is realy easy to fix( status 7 )
put your sd-card into your comuter
go into the zip file of your rom
META_INF>com>google>android>updater-script
open it with notpad++
remote assert(getprop("ro.product.device") == "pyramid" || getprop("ro.build.product") == "pyramid"); -- or watever the build.product will be
then put it in the zip again, make sure you overwrite it
and install the rom again the error should be gone now!
Good luck, JM_team
Re
The same as he said
Or if you have any other recovery on your SD (TWRP or I personally use Devils rec.) Flash it, flash CM and the dreaded error 7 should not come up. I think its due to outdated recovery so either way its better to flash an up to date one. Cheerz