Hello,
Recently rooted my phone with CF-root and installed the nightly build of Cm10. I took the zip-file into my "download" in the interntal memory and went to recovery. When i click the file and start downloading it(after factory reset, cach e.t.c) i get an "installation aborted". Its a long text over "Installation aborted" that i dont understand I have done this to me s2 before(cm9), and i cant understand what im doin wrong.
Please help me. Want to figure this out before i go to bed . Need my phone.
Thank you!
somebody help me??
Well what you have written does not give any information about the error..
Maybe it was a bad download.. Just downloaded it again and check the md5..also if the the problem persists.. Try to put the exact message here.. You can get it in the cache partition as lastinstall.txt..
By the way I am typing from my phone.. So expect typos!!
zoot1 said:
Well what you have written does not give any information about the error..
Maybe it was a bad download.. Just downloaded it again and check the md5..also if the the problem persists.. Try to put the exact message here.. You can get it in the cache partition as lastinstall.txt..
By the way I am typing from my phone.. So expect typos!!
Click to expand...
Click to collapse
Thank you for answering !
I have tryed many different builds in CM10, so its not a bad download.
The error i am receiving is following : asser failed: getprop("ro.product.device") == " Under this it says the same as i just wrote. Then it says : E=Error in /sdcard/cm-10-20120913-NIGTHLY-d2att.zip
(Status 7)
Installation aborted.
I am running CWM-based recovery v5.5.0.4 with CF-v1.3 root
heeelp
Smurflin96 said:
Thank you for answering !
I have tryed many different builds in CM10, so its not a bad download.
The error i am receiving is following : asser failed: getprop("ro.product.device") == " Under this it says the same as i just wrote. Then it says : E=Error in /sdcard/cm-10-20120913-NIGTHLY-d2att.zip
(Status 7)
Installation aborted.
I am running CWM-based recovery v5.5.0.4 with CF-v1.3 root
heeelp
Click to expand...
Click to collapse
Tell me something, do you have an international galaxy S3, if yes then I believe you are downloading the wrong CM10 file, go to this page and then download the file..
The error is saying that your device check is failing..if your device check fails even after you use the linked file then using 7zip open up the file, go to META-INF>com>google>android>updater-binary and open it using Notepad++ delete the 2 lines starting from assert_check(getprop("ro.product.device") ..
Save the file and then try to flash..however in my opinion you are flashing the wrong file as the 13-09 file does not have cm-10-20120913-NIGTHLY-d2att.zip in its name..
Related
Yet again following this guide: http://forum.xda-developers.com/showthread.php?t=1239821
I did every step in order, but when i get into TWRP, then choose "Install Zip". After i choose "Choose Zip To Flash" i select "su-2.3.6.3.zip"
I get this:
Code:
Mounting SYSTEM...
Deleting SYSTEM:bin/su...
Deleting SYSTEM:xbin/su...
Extracting files to SYSTEM...
Setting SYSTEM:bin/su permissions to 6755...
Creating SYSTEM:xbin/su symbolic link...
E:Error in /tmp/sideload/package.zip
(Status 0)
Why did i get that error and is there anyway i can fix it?
When i reboot my phone it says it just had an "abnormal reset"
xRemy said:
Yet again following this guide: http://forum.xda-developers.com/showthread.php?t=1239821
I did every step in order, but when i get into TWRP, then choose "Install Zip". After i choose "Choose Zip To Flash" i select "su-2.3.6.3.zip"
I get this:
Code:
Mounting SYSTEM...
Deleting SYSTEM:bin/su...
Deleting SYSTEM:xbin/su...
Extracting files to SYSTEM...
Setting SYSTEM:bin/su permissions to 6755...
Creating SYSTEM:xbin/su symbolic link...
E:Error in /tmp/sideload/package.zip
(Status 0)
Why did i get that error and is there anyway i can fix it?
When i reboot my phone it says it just had an "abnormal reset"
Click to expand...
Click to collapse
I would use cwm as recovery twrp 2.0 has issues. Abnormal reset is normal on stock roms click it tell it not to send . Then go to about phone in menu click it on the top click tell HTC click it shut off the bug report and send thing . This will stop the abnormal reset message .
reaper24 said:
I would use cwm as recovery twrp 2.0 has issues.
Click to expand...
Click to collapse
Alright could you give me a link to it?
Also how would i remove TWRP from my sd card?
xRemy said:
Alright could you give me a link to it?
Also how would i remove TWRP from my sd card?
Click to expand...
Click to collapse
If you just flashed it in boot there is nothin to remove . When you flash cwm it will over write twrp here u go http://forum.xda-developers.com/showthread.php?p=14693680 cdma shooter EVO 3d one
okay so i did what you said and booted CWM.
And i get this error:
Code:
E:Error in /sdcard/2.3.6.3.zip
(Status 0)
Installation aborted.
Do you think there is something wrong with my .zip file?
xRemy said:
okay so i did what you said and booted CWM.
And i get this error:
Code:
E:Error in /sdcard/2.3.6.3.zip
(Status 0)
Installation aborted.
Do you think there is something wrong with my .zip file?
Click to expand...
Click to collapse
Ya zip maybe bad did you try to flash in recovery? I just download it from the market or I just flash a rom that has it in it. I have been using fresh rom smooth battery life is grand.
So i installed Scott's CleanROM today no problems, thanks for the help
Hi,
i've tried to install this rom on my x10i http://forum.xda-developers.com/showthread.php?t=1782771 but when i choose the file in cmw5 and hit install it says E:Error in /sdcard/XPERIA S ICS AOPK.zip (status 7) installation aborted.
before this ive unlocked the bootloader as this thread write: http://forum.xda-developers.com/showthread.php?t=1254087 and i think it was successful because i can flash this kernel http://forum.xda-developers.com/showpost.php?p=28126178&postcount=1566
and the SE logo disappeared.
what did i do wrong?? please help me! thanks!
qvasz said:
Hi,
i've tried to install this rom on my x10i http://forum.xda-developers.com/showthread.php?t=1782771 but when i choose the file in cmw5 and hit install it says E:Error in /sdcard/XPERIA S ICS AOPK.zip (status 7) installation aborted.
before this ive unlocked the bootloader as this thread write: http://forum.xda-developers.com/showthread.php?t=1254087 and i think it was successful because i can flash this kernel http://forum.xda-developers.com/showpost.php?p=28126178&postcount=1566
and the SE logo disappeared.
what did i do wrong?? please help me! thanks!
Click to expand...
Click to collapse
In the ZIP file (Meta-inf -> com -> Google -> Android) there is a file updater-script, you need to edit this file with notepad or similar. You need to get rid of the first line which has lots of "props" , so the first thing that stays there is : package_extract_file blabla
egerth said:
In the ZIP file (Meta-inf -> com -> Google -> Android) there is a file updater-script, you need to edit this file with notepad or similar. You need to get rid of the first line which has lots of "props" , so the first thing that stays there is : package_extract_file blabla
Click to expand...
Click to collapse
i did it but it says now E:Error in /sdcard/xperia s ics aokp.zip (status 6) installation aborted. :S
qvasz said:
i did it but it says now E:Error in /sdcard/xperia s ics aokp.zip (status 6) installation aborted. :S
Click to expand...
Click to collapse
Use different recovery, that might solve your problems.....
Sent from my Transformer TF101 using xda app-developers app
udupa82 said:
Use different recovery, that might solve your problems.....
Sent from my Transformer TF101 using xda app-developers app
Click to expand...
Click to collapse
ive tried the xrecovery but i got the same error message. but i cant install any rom with 4.0 :/
i write down what i already did, cuz i might forgot something,
first i unlocked the bootloader as i said then
i flashed the kernel with flashtool, then
i did a full wipe and then try to flash the rom.
Try this?
If you have unlocked Bootloader (Checked through S1tool that you have unlocked bootloader, and have such flashing errors, try this
1.Try flash KCernel V3 here via flashtool since got multiple recoveries. You will get KCernel Logo shows once powered on.
2.Got Backed Up Locked Bootloader stock ROM data? Restore it back from similar xrecovery you used, compared to Kcernel's
3.You will get bootanimation of your previous ROM, bootloop, so won't get homescreen reached.
4.Take Off battery for few seconds, and then power it on
5.Get back to CWM Recovery and make full wipe, clear dalvik cache:
6.Flash your 4.0 ROM zip
7.Should work normally...
I tried before and worked Just share my little past experience though I'm now in AOKP ICS. Hope helps
whitefang
Ok thanks for everybody now its working fine i flashed the stock 2.3.3 rom then root my phone again and then flash the kernel and the rom so its all good
Sent from my Xperia X10 using xda app-developers app
OK so i tried to install a new rom besides honey comb and i tried to install cm10 on my galaxy tab 10.1 gt-p7500.
I've rooted all my phone and everything worked out but to my stupidity i didnt make a nandroid backup this time.
I downloaded the rom and gapps from here
http://forum.xda-developers.com/showthread.php?t=1787399&page=40
i successfully rooted my tab
i installed cwm
i installed unziped odin3 in the root folder
I did a kevlin wipe and system format, factory reset and cache wipe
I flashed the rom 3 secs through it says
assert failed: getprop ('ro.product.device") == get prop('ro.product.device") == "p4"
Error in /sdcard/cm10........
(Status 7)
installation aborted
so am i pretty much screwed? or is there a way to fix this?
(Note i could connect via usb so i used kies air or something like that... to transfer the files over wifi)!!!
ANY HELP IS GREATTTTTLYYYY APPRECIATED!
hassmaster said:
OK so i tried to install a new rom besides honey comb and i tried to install cm10 on my galaxy tab 10.1 gt-p7500.
I've rooted all my phone and everything worked out but to my stupidity i didnt make a nandroid backup this time.
I downloaded the rom and gapps from here
http://forum.xda-developers.com/showthread.php?t=1787399&page=40
i successfully rooted my tab
i installed cwm
i installed unziped odin3 in the root folder
I did a kevlin wipe and system format, factory reset and cache wipe
I flashed the rom 3 secs through it says
assert failed: getprop ('ro.product.device") == get prop('ro.product.device") == "p4"
Error in /sdcard/cm10........
(Status 7)
installation aborted
so am i pretty much screwed? or is there a way to fix this?
(Note i could connect via usb so i used kies air or something like that... to transfer the files over wifi)!!!
ANY HELP IS GREATTTTTLYYYY APPRECIATED!
Click to expand...
Click to collapse
Check out the OP on the thread for the AOSP version of jelly bean. http://forum.xda-developers.com/showthread.php?t=1765254
It says you need to update your recovery to a certain version. That is said to stop the assert 7 issue you are having.
Sent from my GT-P7510 using xda app-developers app
Hi,
I'm new to this forum and thisis my first post with a rather serious Problem:
I tried to flash my GalaxyTab P7500 as described here in post #80 using Mobile Odin. Problem is, the tab did not restart but has been stuck for an hour with the attached screen. It does not react to anything, not even the power button.
Any ideas what went wrong and what I could do?
Greets,
selcall
Edit: stupid me, didn't press power off long enough. Seems to work, although it should have rebooted by itself!
the first time I tried to install CM10 I've got the same same system error.
you have to use the cwm version 5.5.0.4
you can found it on DROID basement website.
edit:
link for cwm
http://droidbasement.com/db-blog/?p=2668
flash via Odin and the flashing of cm should work fine.
Sent from my GT-P7500 using XDA Premium HD app
marco.michel said:
the first time I tried to install CM10 I've got the same same system error.
you have to use the cwm version 5.5.0.4
you can found it on DROID basement website.
edit:
link for cwm
http://droidbasement.com/db-blog/?p=2668
flash via Odin and the flashing of cm should work fine.
Sent from my GT-P7500 using XDA Premium HD app
Click to expand...
Click to collapse
Is 5.5.0.4 REQUIRED for CM10 to flash properly? Or will any version over and above but inclusive of 5.5.0.4 work? (I'm on 5.8.3.1 for example, flashed via Rom Manager...)
please help..i have s2 and i was using beanstalk rom i found it was laggy and i tried to change the kernel.. i installed apolo didnt work..was stuck at bootloop later i installed speedmod...still no effect..stuck at bootloop.. now my phone is not going in recovery or download mode..can any one help please... later i managed to go to download mode but i downloaded siyah kernel tar file and put it in odin..i did flash.. still its stuck.. plesae help
if u can go again in download mode flash a stock 4.1.2 from samobile then reroot with philz kernel and pray to s2 gods while doing that
Sent from my GT-I9100 using xda app-developers app
mapps563 said:
please help..i have s2 and i was using beanstalk rom i found it was laggy and i tried to change the kernel.. i installed apolo didnt work..was stuck at bootloop later i installed speedmod...still no effect..stuck at bootloop.. now my phone is not going in recovery or download mode..can any one help please... later i managed to go to download mode but i downloaded siyah kernel tar file and put it in odin..i did flash.. still its stuck.. plesae help
Click to expand...
Click to collapse
.
Use Odin and flash stock Rom. After successful flash do a wipe. Cheers
okay,, i;m doin it... and theres no india country in sammobile while downloading..and i tried again siyah kernel last time but it says fail.. what's pit file and re-partition ??can anything be added to include so that it works
hope it works out.. fingers crossed
i tried to flash the rom it says "SET_METADATA_RECURSIVE: SOME CHANGES FAILED " AND " STATUS 7 " INSTALLATION ABORTED
EDIT / DELETE
REPLY Multi-Quote This Message
i tried to flash the rom it says "SET_METADATA_RECURSIVE: SOME CHANGES FAILED " AND " STATUS 7 " INSTALLATION ABORTED
EDIT / DELETE
REPLY Multi-Quote This Message
mapps563 said:
i tried to flash the rom it says "SET_METADATA_RECURSIVE: SOME CHANGES FAILED " AND " STATUS 7 " INSTALLATION ABORTED
EDIT / DELETE
REPLY Multi-Quote This Message
Click to expand...
Click to collapse
If you are using single file in pda make sure "re-partition"is NOT checked.
If single file fails look for multi files with pit and try. If therer is pit filr re-partition will automatically be checked. Cheers
Hello everyone, i am facing a great wall of desperation, i woke up today to find my mobile stuck on samsung logo, and i noticed it's not responding, i booted to my CWM recovery and it kept generating these errors :
E:can't mount /cache/recovery/command
E: can't mount /cache/recovery/log
E: open /cache/recovery/log
E:can't mount /cache/recovery/last_log
E: can't open /cache/recovery/last_install
E: can't mount /cache/recovery/last_install
i tried wiping data but keeps generating same errors to the internal SD card with a unique error : E:format_volume: make_extf4fs failed on /dev/block/mmcblk0p8 .
i looked for a custom recovery file that i can install using ODIN but they're all in .img form not .tar.md5 so i didn't know what to do with them, phone doesn't recognize .img to install directly from sd card.:crying:
i tried using odin to install custom recovery tar.md5 file but didn't fix anything,
i tried installing this rom ( http://forum.xda-developers.com/galaxy-s3/development/rom-archidroid-v2-4-6-power-hands-t2354859 ) using the ( mount external sd card ) and transfering rom zip file and installing it via CWM recovery interface, the installation was succesful but still can't boot due to the mentioned errors .
i tried using ABD thingie but for somereason it just won't recognize my phone, while odin does, i tried installing and reinstalling samsung usb driver and ABD drivers but still didn't help,
my original ROM was CM 11.2 nightly.
please help i am desperate, i searched everywhere but there's always something that falls between my steps .
i am more than happy to get assistance via skype etc.
i managed to download and flash my phone with stock 4.3, but i am still facing same problem, stuck at samsung logo and same errors in CWM recovery .
Same problem
i think we might have the same problem.
samdroid posted a possible solution in my thread maybe try that?
http://forum.xda-developers.com/galaxy-s3/help/samsung-i9300-wont-pass-boot-t2809239
Sporedd66 said:
i think we might have the same problem.
samdroid posted a possible solution in my thread maybe try that?
http://forum.xda-developers.com/galaxy-s3/help/samsung-i9300-wont-pass-boot-t2809239
Click to expand...
Click to collapse
but i can't find a thread or forum section dedicated to cm 11 !
update: i was able to access ABD command line, i tested 3 CWM recovery .img files and all 3 of them reported as (bad) by my phone .
Could be bad eMMC. If you want to be sure try flash the rescue firmware from this thread (with pit) http://forum.xda-developers.com/showpost.php?p=30087735&postcount=6
If it's still not working it's a hardware fault.
DrFredPhD said:
Could be bad eMMC. If you want to be sure try flash the rescue firmware from this thread (with pit) http://forum.xda-developers.com/showpost.php?p=30087735&postcount=6
If it's still not working it's a hardware fault.
Click to expand...
Click to collapse
thank you for the suggestion, i am downloading it as we speak, i sure hope it's not physical brick, i really can't afford buying new phone atm....
DrFredPhD said:
Could be bad eMMC. If you want to be sure try flash the rescue firmware from this thread (with pit) http://forum.xda-developers.com/showpost.php?p=30087735&postcount=6
If it's still not working it's a hardware fault.
Click to expand...
Click to collapse
after multiple tries, it didn't work, the installation won't even initialize, it keeps saying FAIL
please anyone...help !!!!
If you're still in warranty send it in for repair. Sometimes eMMC will fail and download mode will say custom even if phone has never been flashed so they might repair it for you.
DrFredPhD said:
If you're still in warranty send it in for repair. Sometimes eMMC will fail and download mode will say custom even if phone has never been flashed so they might repair it for you.
Click to expand...
Click to collapse
it's been long since off warranty, if there's a fix it has to be something i can do myself, sending it for repair is out of the question .
Rom
simlol12 said:
please anyone...help !!!!
Click to expand...
Click to collapse
Meanwhile download CFAutoroot and make the recovery of stoock and see if there is recovery. After you find MK6 Factory with BL,AP,CSC,Modem, separated and with odin 3.9 to install and i hope that you have data backup because this eliminates everything. If this succeeds you should do restore the folders EFS. I hope that you can help if you have any problems finding the material send me a private message that I see if I can upload them to mega .