When i tried to install MikOS 6.5.8 from froyo 2.2.2 after rooting using gingerbreak and resetting everything i am getting this error..
assert failed: getprop (ro.product.device)=="thuderg"
getprop (ro.build.product)=="thuderg"
getprop (ro.product.board)=="thuderg"
E:Error in /sdcard/cynogen_thunderg-ota-eng.mik-6.5.8.zip (status 7)
Instalation aborted.
How to rectify this?
jomatt said:
When i tried to install MikOS 6.5.8 from froyo 2.2.2 after rooting using gingerbreak and resetting everything i am getting this error..
assert failed: getprop (ro.product.device)=="thuderg"
getprop (ro.build.product)=="thuderg"
getprop (ro.product.board)=="thuderg"
E:Error in /sdcard/cynogen_thunderg-ota-eng.mik-6.5.8.zip (status 7)
Instalation aborted.
How to rectify this?
Click to expand...
Click to collapse
In CWM>install zip from sdcard>asserts. is that enabled? try again after disabling it if it's enabled.
can u explain how to get this option?
i have only these options in it..
choose zip from sd card
apply/sdcard/update.zip
toggle script asserts
toggle signature verification
jomatt said:
toggle script asserts
Click to expand...
Click to collapse
I was talking about the above thing!
I Forgot the complete name, sorry!
Disabled it..and tried to flash again..
but the same error preventing everything..
When flashing aborted it reverted back to stock 2.2.2 froyo everytime..
when this happens previously installed gingerbreak and rom manager app is gone missing..
but super user is still there..
i get this same problem when trying to do an update from the nightlys any fix's? or ideas?
My Problem solved.... Actually the main cause is with CWM recovery ..
i tried latest CWM instead of old baseband CWM 5.0.2.0..
after flasing CWM 5.0.2.0 everything went smoothly.. No issues..
jomatt said:
My Problem solved.... Actually the main cause is with CWM recovery ..
i tried latest CWM instead of old baseband CWM 5.0.2.0..
after flasing CWM 5.0.2.0 everything went smoothly.. No issues..
Click to expand...
Click to collapse
Hrmmm So did i.. But now my CMW recovery is a black screen i can't see anything and can't figure out how to fix it.. do you got any ideas? lol
What i did was..
Installed Rom manager from market ...after installing the app took CWM recovery [first optiion in the app]
..ie selecting the second one for old base band and successfully flashed it..
its simple and haven't faced any such issue..
But before doing all these process i made factory reset of handset.. that would make flashing easier..
jomatt said:
What i did was..
Installed Rom manager from market ...after installing the app took CWM recovery [first optiion in the app]
..ie selecting the second one for old base band and successfully flashed it..
its simple and haven't faced any such issue..
But before doing all these process i made factory reset of handset.. that would make flashing easier..
Click to expand...
Click to collapse
Right on yeah I ended up getting it took a little bit but now that i know how its done i'll be good to go.. Just trying to figure out my last main problem.. I have no reception.. but i got data lol
Signal problem is because of base band mismatch.. Check if ur flashing a rom that support old or new baseband..
In case rom support old base band u have to revert back to old baseband stock froyo then flash it GB custom Rom..
Most radio problems is because of this base band mismatch..
jomatt said:
Signal problem is because of base band mismatch.. Check if ur flashing a rom that support old or new baseband..
In case rom support old base band u have to revert back to old baseband stock froyo then flash it GB custom Rom..
Most radio problems is because of this base band mismatch..
Click to expand...
Click to collapse
Alright here's the question.. I understand that it's could be the base band.. but if they didn't match would that mean i get service in some areas rather than other?
If nothing working..
why don't you try default stock rom and check the network issue is still there..
if it exists there may be some hardware problem..
I think that u have to flash the stock Rom via kdz.. is the only way for not having baseband. Mismatching and all other **** totally working
Inviato dal mio LG-P500 usando Tapatalk
Related
I am currently using ICS Lunar pro v2.8 with venice 2.6.32 kernal and i am on the old baseband atm. Now i am thinking of upgrading to the new baseband to try new roms (AGA or CM9) and some of the games gives FC on old rom so i read the safest method to do that is via LGMDP tool and read this guide on how to flash the new baseband/radio with it. so my question is can i flash that directly over my current ROM (i knw i wont get signal) and after that flash AGA ROM ? main question is will the recovery still be there after flashing the Baseband ?? or should i follow some other guide ??
Your custom recovery will stay there, so don't worry.
btw, if you need to get recovery sometimes, use this method...
droidaem said:
Your custom recovery will stay there, so don't worry.
btw, if you need to get recovery sometimes, use this method...
Click to expand...
Click to collapse
thanks for the reply.. i followed the guide to update via lgdmp and everything went good until NVRESTORE .. it showed an error "ERROR! NV Restore Failed" and the phone screen was black . i waited for a few moments and then clicked OK and the DoWNload < Select port < connected my fone again and then clicked on NV restore it restored succesfully and now fone works. Though i m not getting any signal and baseband version in ABOUT PHONE says UNKNOWN but i guess thats normal. Now going to flash AGA ROM via recovery. Hope it works
PHEW! it worked..
though that error made me kill myself!
when trying to install a custom rom from cwm recovery always gives me the error status 7 installation aborted, why?
Thanks
Redownload and try again.
Have the same problem, redownload doesn't solve the issue.
duke_droid said:
Have the same problem, redownload doesn't solve the issue.
Click to expand...
Click to collapse
The same for me, always error 7, instalation aborted.
CWm again
FlasH cwm Again if u r using cwm5 revert back to previous version d try again
Click thnkz if i helped[/SIZE]
Hi,
i've tried to install this rom on my x10i http://forum.xda-developers.com/showthread.php?t=1782771 but when i choose the file in cmw5 and hit install it says E:Error in /sdcard/XPERIA S ICS AOPK.zip (status 7) installation aborted.
before this ive unlocked the bootloader as this thread write: http://forum.xda-developers.com/showthread.php?t=1254087 and i think it was successful because i can flash this kernel http://forum.xda-developers.com/showpost.php?p=28126178&postcount=1566
and the SE logo disappeared.
what did i do wrong?? please help me! thanks!
qvasz said:
Hi,
i've tried to install this rom on my x10i http://forum.xda-developers.com/showthread.php?t=1782771 but when i choose the file in cmw5 and hit install it says E:Error in /sdcard/XPERIA S ICS AOPK.zip (status 7) installation aborted.
before this ive unlocked the bootloader as this thread write: http://forum.xda-developers.com/showthread.php?t=1254087 and i think it was successful because i can flash this kernel http://forum.xda-developers.com/showpost.php?p=28126178&postcount=1566
and the SE logo disappeared.
what did i do wrong?? please help me! thanks!
Click to expand...
Click to collapse
In the ZIP file (Meta-inf -> com -> Google -> Android) there is a file updater-script, you need to edit this file with notepad or similar. You need to get rid of the first line which has lots of "props" , so the first thing that stays there is : package_extract_file blabla
egerth said:
In the ZIP file (Meta-inf -> com -> Google -> Android) there is a file updater-script, you need to edit this file with notepad or similar. You need to get rid of the first line which has lots of "props" , so the first thing that stays there is : package_extract_file blabla
Click to expand...
Click to collapse
i did it but it says now E:Error in /sdcard/xperia s ics aokp.zip (status 6) installation aborted. :S
qvasz said:
i did it but it says now E:Error in /sdcard/xperia s ics aokp.zip (status 6) installation aborted. :S
Click to expand...
Click to collapse
Use different recovery, that might solve your problems.....
Sent from my Transformer TF101 using xda app-developers app
udupa82 said:
Use different recovery, that might solve your problems.....
Sent from my Transformer TF101 using xda app-developers app
Click to expand...
Click to collapse
ive tried the xrecovery but i got the same error message. but i cant install any rom with 4.0 :/
i write down what i already did, cuz i might forgot something,
first i unlocked the bootloader as i said then
i flashed the kernel with flashtool, then
i did a full wipe and then try to flash the rom.
Try this?
If you have unlocked Bootloader (Checked through S1tool that you have unlocked bootloader, and have such flashing errors, try this
1.Try flash KCernel V3 here via flashtool since got multiple recoveries. You will get KCernel Logo shows once powered on.
2.Got Backed Up Locked Bootloader stock ROM data? Restore it back from similar xrecovery you used, compared to Kcernel's
3.You will get bootanimation of your previous ROM, bootloop, so won't get homescreen reached.
4.Take Off battery for few seconds, and then power it on
5.Get back to CWM Recovery and make full wipe, clear dalvik cache:
6.Flash your 4.0 ROM zip
7.Should work normally...
I tried before and worked Just share my little past experience though I'm now in AOKP ICS. Hope helps
whitefang
Ok thanks for everybody now its working fine i flashed the stock 2.3.3 rom then root my phone again and then flash the kernel and the rom so its all good
Sent from my Xperia X10 using xda app-developers app
I am trying to flash the new FXP rom on my Xperia P but i keep getting this error :
Code:
format() expects 4 args, got 5
E:Error in 'location of the zip file comes here'
(Status 7)
Any idea on how to fix this ??
I have CWM-based recovery v6.0.1.2 by [email protected]
Open the updater script and delete the first 3 lines that say LT22i. Then flash again
Sent from my ST25i using Tapatalk 2
You have wiped system.
Do never wipe system. It is used to verify that you are trying to install it on the correct device.
Rapier07 said:
Open the updater script and delete the first 3 lines that say LT22i. Then flash again
Sent from my ST25i using Tapatalk 2
Click to expand...
Click to collapse
that doesnt work
DavidMKD said:
that doesnt work
Click to expand...
Click to collapse
Go to "CWM"->"install zip from sdcard"->"toggle signature verification".
Then try to install the edited ROM.
hnl_dk said:
Go to "CWM"->"install zip from sdcard"->"toggle signature verification".
Then try to install the edited ROM.
Click to expand...
Click to collapse
still the same error. I tried that even when I had the first error.
DavidMKD said:
still the same error. I tried that even when I had the first error.
Click to expand...
Click to collapse
The first error is because system has been wiped, so it will only help, if the assert has been removed.
What you could do, is to try to temporarily install a ROM, that does not check for what device it is installed on.
When that is done, are you able to install the FXP ROM, as the other one will setup a new system partition.
What did he exactly wrong ?
It should be?
Wipe cache
Wipe dalvik cache
Format system
Install fxp
Enjoy
Thx
thebrainkafka said:
What did he exactly wrong ?
It should be?
Wipe cache
Wipe dalvik cache
Format system
Install fxp
Enjoy
Thx
Click to expand...
Click to collapse
You may not wipe/format system.
The installation does need system, so make sure that it is installed on the correct phone.
So never wipe/format system yourself.
If it is needed, will the install script do it by itself, when it is needed.
Ok, and there are no issue with older files Which maybe not cleared during Installation when going from gb to ics?
Thx
Hello, I have the same issue, if it can help I solve it by replace the "update-binary" with one I take in a Rom which install well
Excuse for my english.
This may hep you
sau94 said:
I am trying to flash the new FXP rom on my Xperia P but i keep getting this error :
Code:
format() expects 4 args, got 5
E:Error in 'location of the zip file comes here'
(Status 7)
Any idea on how to fix this ??
I have CWM-based recovery v6.0.1.2 by [email protected]
Click to expand...
Click to collapse
I had the same problem when I was flashing MIUI rom weekly update to my Galaxy S3.
When I had this error, I was using CWM Recovery then I flashed Philz Recovery.
I tried to flash ROM again, and It was OK.
I hope, it works for you, too.
oOWeaponXOo said:
Hello, I have the same issue, if it can help I solve it by replace the "update-binary" with one I take in a Rom which install well
Excuse for my english.
Click to expand...
Click to collapse
i got some problem too.. can u explain more details? replace "update-binary" from stock ICS rom or from other rom? my device st25i (xperia u) with xnovathor 4.4.2 Custom rom, i would down grading to Xmiui v4 ICS.
hi =) i know maybe its late but ot end this problem and to let know how to solve to anyway will got this issue the solution is to check ,before flashing the zip, the box to allow the installation of old binaries, it works with an i8260
Hi,
I've been trying to install CM 11 based on Kitkat 4.4.2 on my Xperia P. The following are the details / steps followed:
- The bootloader is unlocked
- The phone is rooted
- CWM 6.0.1.2 is installed ( I think this is the latest available for Xperia P)
1) Downloaded CM11-RC1 from the links in this thread http://forum.xda-developers.com/showthread.php?t=2626639
2) Modified 'updater-script' to get rid of Error 7
3) Extracted 'boot.img' and flashed it using FlashTool in fastboot mode.
After reboot, the phone stops at Sony logo and vibrates once.
4) Pressed the Power button to load CWM Recovery
5) Wiped Data, Cache/Partition, Dalvik Cache
6) Tried to install CM11-RC1 zip file using CWM
Now I get the message "Installation aborted", as soon as the installation begins, without any error code being displayed
I can't seem to get past this step, and don't know where I'm going wrong.
Can anyone please help me out?
Are you sure that your phone is unlocked bootloader ? Did you unlocked yourself ? And you should not change anything in update script because i had flash this rom without problem ...
Sent from my Xperia P using Tapatalk 2
-ss- said:
Are you sure that your phone is unlocked bootloader ? Did you unlocked yourself ? And you should not change anything in update script because i had flash this rom without problem ...
Sent from my Xperia P using Tapatalk 2
Click to expand...
Click to collapse
Yes. The bootloader is unlocked. I did it myself following the instructions on the Sony website.
The installation shows an error 7 if I don't modify the updater script.
Delete sorry
Sent from my Xperia P using Tapatalk
yomayne said:
Yes. The bootloader is unlocked. I did it myself following the instructions on the Sony website.
The installation shows an error 7 if I don't modify the updater script.
Click to expand...
Click to collapse
What i have done with flashing this rom was just followed the OP : format system, format data and format catch then flash ROM and gapps without problem ...
Sent from my Xperia P using Tapatalk 2
-ss- said:
What i have done with flashing this rom was just followed the OP : format system, format data and format catch then flash ROM and gapps without problem ...
Sent from my Xperia P using Tapatalk 2
Click to expand...
Click to collapse
Could it be a version issue? Which one did you flash? I did RC1
Hey I had exactly the same problem. What I did was this:
I used Sony Mobile EMMA to re-install latest stock firmware.
After that I rooted it and Installed CWM 1.0 Nypon, I believe this is CWM somewhere in V6.xxxx (other versions wouldn't work for me..)
I also edited the updater script because it wouldn't pass the assert section, so I deleted this.
After that Recompiled it, (Zip format ofcourse) and copied it to SD card.
Next, I flashed boot.img and rebooted the phone after that. Then access CWM.
Now what I did was userdata/factory reset after that I deleted cache, and last but not least dalvik cache.
After that I flashed the recompiled ROM file and then It passed the status 7 error.
When that was finished I flashed gapps
This was what I did, becuz' I had exactly the same problem. I don't know if this works for you but you might give it a try.
(Sorry for bad Englisch)
(Make sure that your bootloader is unlocked! (To verify, I did try to unlock it again. Then I got a message saying that it was allready unlocked)
ReplayMitta said:
Hey I had exactly the same problem. What I did was this:
I used Sony Mobile EMMA to re-install latest stock firmware.
After that I rooted it and Installed CWM 1.0 Nypon, I believe this is CWM somewhere in V6.xxxx (other versions wouldn't work for me..)
I also edited the updater script because it wouldn't pass the assert section, so I deleted this.
After that Recompiled it, (Zip format ofcourse) and copied it to SD card.
Next, I flashed boot.img and rebooted the phone after that. Then access CWM.
Now what I did was userdata/factory reset after that I deleted cache, and last but not least dalvik cache.
After that I flashed the recompiled ROM file and then It passed the status 7 error.
When that was finished I flashed gapps
This was what I did, becuz' I had exactly the same problem. I don't know if this works for you but you might give it a try.
(Sorry for bad Englisch)
(Make sure that your bootloader is unlocked! (To verify, I did try to unlock it again. Then I got a message saying that it was allready unlocked)
Click to expand...
Click to collapse
Thanks. I'll try doing that. Let's see if it works. Which CM11 build did you flash?
yomayne said:
Thanks. I'll try doing that. Let's see if it works. Which CM11 build did you flash?
Click to expand...
Click to collapse
I flashed RC1 also, I tried almost all nightly's and the RC1 lol but they all wouldn't work before I used this sort of 'method'
Yesterday RC1 workied succesfully for me, today I updated to nightly 25 and everything works fine. Note that once you get passed the installation of RC1, that you can only access the CWM recovery with holding the power button, when your phone vibrates when you see the sony logo.. The CW11 comes with CMW touchable. Goodluck
And did it work?
I've solved my status 7 problem with this video ;
http://www.youtube.com/watch?v=QW1znjDLe-k
gilgin said:
I've solved my status 7 problem with this video ;
http://www.youtube.com/watch?v=QW1znjDLe-k
Click to expand...
Click to collapse
Auful way way to "fix" things.
You can "fix" galaxy ROM to be installed on your phone and brick it permanently, it's already been done.
If you have flashed galaxy kernel you probably won't be able to boot but still able to recover.
Tha asserts are there for a reason.
ChikeD said:
Auful way way to "fix" things.
You can "fix" galaxy ROM to be installed on your phone and brick it permanently, it's already been done.
If you have flashed galaxy kernel you probably won't be able to boot but still able to recover.
Tha asserts are there for a reason.
Click to expand...
Click to collapse
I didn't flash a wrong kernel or rom. İf friend is sure of the right pack to flash, than he can use this method.
I wanted to flash cm nightly 25 (percy's rom) to my xperia p, and the cwm gave status 7 error. Then i have searched a solution for my problem, and i found this video and did what he shows in the video, and i have a cm11 flashed xperia p now. And i also flashed over cm11-weekly.
(sorry if i have a bad english)
gilgin said:
I didn't flash a wrong kernel or rom. İf friend is sure of the right pack to flash, than he can use this method.
I wanted to flash cm nightly 25 (percy's rom) to my xperia p, and the cwm gave status 7 error. Then i have searched a solution for my problem, and i found this video and did what he shows in the video, and i have a cm11 flashed xperia p now. And i also flashed over cm11-weekly.
(sorry if i have a bad english)
Click to expand...
Click to collapse
Sp they released a ROM that cannot be flushed, is that what you say? And no one else reporting it?
Somehow I find it difficult to believe.
If you have followed the instructions I'm sure there would be no problem, or the instructions are incomplete, or there is some issue, either way it's up to the developer to fix it.
Avoid "fixing" errors in this manner or one day you may regret it dearly.
ChikeD said:
Sp they released a ROM that cannot be flushed, is that what you say? And no one else reporting it?
Somehow I find it difficult to believe.
If you have followed the instructions I'm sure there would be no problem, or the instructions are incomplete, or there is some issue, either way it's up to the developer to fix it.
Avoid "fixing" errors in this manner or one day you may regret it dearly.
Click to expand...
Click to collapse
I have followed the instructions in a good way and this was the problem i have lived. Some of my friends lived this problem in a Turkish Forum and i recommended this way, they did it and flash the rom. I will give the link here; http://forum.donanimhaber.com/m_58138440/mpage_242/f_//tm.htm#87204228
My nick is ENG_civ on that forum. Everything is right about the rom but something goes in a wrong way, so this way makes the compiler not asking "is this right rom?", that's all. İn my opinion, if you are sure of the rom, there is no risk.
And i am new in this forum, and i couldn't write at development part, and this is the first time i am writing to a foreign language forum. So i couldn't reported them, and these rom's are not the final, so there could be faults on them i think.
gilgin said:
I've solved my status 7 problem with this video ;
(video)
Click to expand...
Click to collapse
I solved the problem with the CM11 this way too. But when I tried to install gapps after install cm11 appear the "status 7". What can I do?
Edit: I can flash the normal cm11 (without edit the .txt) but the problem with the gapps continues. I turned on my phone and then the cyanogenmod logo start running and don't leave this screen. Anyone can help me?
Error:
set_metadata_recursive: some changes failed
E:Error in /storage/sdcard0/gapps-kk-20140105.signed.zip (status 7)
Installation aborted.
nortonz said:
I solved the problem with the CM11 this way too. But when I tried to install gapps after install cm11 appear the "status 7". What can I do?
Edit: I can flash the normal cm11 (without edit the .txt) but the problem with the gapps continues. I turned on my phone and then the cyanogenmod logo start running and don't leave this screen. Anyone can help me?
Error:
set_metadata_recursive: some changes failed
E:Error in /storage/sdcard0/gapps-kk-20140105.signed.zip (status 7)
Installation aborted.
Click to expand...
Click to collapse
For gapps its normal. Its actually flashed
Sent from my Xperia P using Tapatalk
AndroidNoob69 said:
For gapps its normal. Its actually flashed
Sent from my Xperia P using Tapatalk
Click to expand...
Click to collapse
How "normal" ?
PS: now my celphone has cyanogenmod 11 ! I'm so glad and grateful for this post!
nortonz said:
How "normal" ?
Click to expand...
Click to collapse
'normal' as in everyone has it. The zip is actually flashed.
Sent from my Xperia P using Tapatalk
It worked!
Thanks so much ! I'm finally running 4.4.2