will the included USB cable that comes with the Note be able to charge the phone in my car if i plug it into lets say my iPhone auto adapter which has a usb port on it?
ARTAQaf said:
will the included USB cable that comes with the Note be able to charge the phone in my car if i plug it into lets say my iPhone auto adapter which has a usb port on it?
Click to expand...
Click to collapse
You will be charged at much slower rate (limited to 500ma max), or not at all if your phone battery is almost dead. iPhone chargers are designed for iPhone only. You will need a Samsung auto charger (some other non-iPhone smartphone chargers may work too, just not iPhone chargers).
I just bought a cheap 5$ car charger USB adapter for the note will it work?
corey_r said:
I just bought a cheap 5$ car charger USB adapter for the note will it work?
Click to expand...
Click to collapse
It will definitely work. The question with those cheap ones is, how long will it last. I usually try to find an OEM branded one like this:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=250973439590#ht_2859wt_1000
Typically, chargers with USB port on it will only do slow charge. In order to support fast charge, you will need short out the data pins to allow phone to draw more than 500ma. Typically auto-chargers that comes with microUSB plug directly, such as the Samsung auto charger, will do so, asume your charger is rated to output more than 500ma.
ARTAQaf said:
will the included USB cable that comes with the Note be able to charge the phone in my car if i plug it into lets say my iPhone auto adapter which has a usb port on it?
Click to expand...
Click to collapse
It will be able to charge it. Keep in mind IF your iPhone USB charger max current output (5V 1000mA) is LESS than the Note's charger output, it will take longer to fully charge - but it will charge and will NOT damage the phone.
If you're looking to buy a new usb charger, look for one with the highest mA output rating since whatever device you plug into it will only draw what it needs. ie, my iPad charger is rated @ 2A/2000mA so it covers every device I own (all rated for different current inputs from 500mA up to 2000mA) and that's the only usb charger I take when I travel since I just have to switch out cables to charge other devices. On the other hand, if I only had a lower current rating usb charger, my iPad (requires 2000mA) would be out of luck.
Current output info can be found on the respective charger of your favorite device.
Hope that helps.
it does help, thanx Rand! i cancelled my Amazon order...wish i saw this post sooner.
I have this works great with anything up to 2.1amps...
http://www.bestbuy.com/site/Belkin+...&ref=06&loc=01&ci_src=14110944&ci_sku=1232905
I just bought this
Man I wish I saw this an hour ago I just bought this you think it's ok?http://www.ebay.com/itm/280818054928?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649:confused:
JGuinan007 said:
Man I wish I saw this an hour ago I just bought this you think it's ok?http://www.ebay.com/itm/280818054928?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649:confused:
Click to expand...
Click to collapse
Looks like that charger is rated @ 700mA. It'll charge the note about 30% slower than the wall charger.
This is my car charger
http://www.proclipusa.com/brodit-de...ord-for-fixed-installation--513303-18842.aspx
poop i couldn't cancel my amazon order. well i 'm sure i'll still use it.
Related
From the "Ultimate AT&T Galaxy Note Accessory Guide" thread:
fbauto1 said:
13. Car Charger + Power Inverters
$10 -- PowerGen Dual USB 2A Heavy Duty Ouput Car Charger for Apple iPad 2, iPhone 4 4s 3Gs 3G, iPod Touch (USB Cable not included) --- Review
Click to expand...
Click to collapse
Has anyone else used the PowerGen car charger with the Note? I have a handful of other ones that all claim to fast-charge devices, but apparently it only works with iPhones and iPads. But since the PowerGen unit is on the list, can I assume people have used it and confirmed it will give me a 1A charge rate on the Note? I need a charger that can keep up with the Note occasionally drawing 1.4 A or more (display 100% brightness, GPS, LTE, Bluetooth all active, running Navigation).
A quick search for "powergen" in this forum only brings up the above thread.
Works like a champ. My battery was charging at 1600mAh while streaming soundcloud and using navigation. Definitely does the job.
I am using my car charger for galaxy tab 10.1 (2.0 amp) and it is working much better than any of the 1 amp chargers I have tried, OEM, boxwave, etc...
I also use the GT 101. 110V charging brick, so when I travel, only one brick and two cables. My experience is that the 2 amp charger works really well and will charge the phone while using GPS full time, where the OEM charger and other 1 amp chargers either maintain charge, or slightly discharge.
Thanks for the confirmation! Of course, now I discover Amazon won't ship that to Canada, and amazon.ca does not carry it. :crying: I'd go see what TELUS has to offer, but I'm sure it will be A) expensive and B) not have dual USB ports, or perhaps not even a detachable cord.
If you do find one, also buy a charge-only usb cord.
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
tdamocles said:
If you do find one, also buy a charge-only usb cord.
Click to expand...
Click to collapse
Is that still needed if the charger itself correctly supports fast charging? The cord I use now is the one from my Touchpad. I get 1 A to the Note from the AC plug, and the Touchpad gets around 1.8 A. I do also have a charge-only cable (much thinner cord, only two wires), but it doesn't seem to make a difference.
taob said:
Is that still needed if the charger itself correctly supports fast charging? The cord I use now is the one from my Touchpad. I get 1 A to the Note from the AC plug, and the Touchpad gets around 1.8 A. I do also have a charge-only cable (much thinner cord, only two wires), but it doesn't seem to make a difference.
Click to expand...
Click to collapse
The cord from the touchpad is probably wired correctly internally for fast charge. I bought a similar dual car charger and did not see a difference with the micro usb sync cable. I only saw a difference with a charge-only micro usb cable. The phone sees what pins are connected and determines if it is going to charge in usb charge mode(<=500ma) or AC charge mode(>=500ma).
tdamocles said:
The cord from the touchpad is probably wired correctly internally for fast charge. I bought a similar dual car charger and did not see a difference with the micro usb sync cable. I only saw a difference with a charge-only micro usb cable. The phone sees what pins are connected and determines if it is going to charge in usb charge mode(<=500ma) or AC charge mode(>=500ma).
Click to expand...
Click to collapse
So you use the Touchpad USB micro cable to charge your Note in the car? I thought the cable is too short? I am looking for a LONG USB micro cable that is shorted so it will give >500mA.
I am planning to buy the PowerGen but I need recommendation on the CORRECT USB cable that is long enough.
---------- Post added at 09:26 AM ---------- Previous post was at 09:24 AM ----------
slapshot591 said:
Works like a champ. My battery was charging at 1600mAh while streaming soundcloud and using navigation. Definitely does the job.
Click to expand...
Click to collapse
What cable do you use?
tdamocles said:
The cord from the touchpad is probably wired correctly internally for fast charge.
Click to expand...
Click to collapse
I don't think it is, because it also works as a normal USB data cable. If pins 2 and 3 are shorted (D+ and D-), then the cable become "charge only" and cannot be used for data.
I bought a similar dual car charger and did not see a difference with the micro usb sync cable. I only saw a difference with a charge-only micro usb cable.
Click to expand...
Click to collapse
Then it sounds like that car charger was an "iPad-compatible" one, i.e.: it does not have D+/D- shorted out to indicate to non-Apple devices that it is capable of more than 500 mA.
lanwarrior said:
So you use the Touchpad USB micro cable to charge your Note in the car? I thought the cable is too short?
Click to expand...
Click to collapse
The cable is about a meter in length. I only need about half that to reach from the plug to the phone mount on the dash.
taob said:
I don't think it is, because it also works as a normal USB data cable. If pins 2 and 3 are shorted (D+ and D-), then the cable become "charge only" and cannot be used for data.
Then it sounds like that car charger was an "iPad-compatible" one, i.e.: it does not have D+/D- shorted out to indicate to non-Apple devices that it is capable of more than 500 mA.
Click to expand...
Click to collapse
So then how does it charge fast then? If the cable isn't shorted? Motorola does the same thing. IIRC its a shorted setup to allow for fast charging. All of my USB cables come from Samsung, HP, and Motorola and I use them as data cables as well
Sent from my SAMSUNG-SGH-I717 using XDA
erick161 said:
So then how does it charge fast then? If the cable isn't shorted?
Click to expand...
Click to collapse
You short the pins inside the AC adapter or car charger, rather than the cable. If I understand correctly, the danger of using a charge-only cable is if you plug it into an actual USB port that isn't designed to supply more than 500 mA. Your device could then try to pull down, say, 2000 mA and potentially damage the power supply on your laptop or desktop.
taob said:
You short the pins inside the AC adapter or car charger, rather than the cable. If I understand correctly, the danger of using a charge-only cable is if you plug it into an actual USB port that isn't designed to supply more than 500 mA. Your device could then try to pull down, say, 2000 mA and potentially damage the power supply on your laptop or desktop.
Click to expand...
Click to collapse
Ahh OK. Well, the cigarette lighter/USB converters must act like shorted out wall chargers.
That's my setup.
Sent from my SAMSUNG-SGH-I717 using XDA
I'm using the Rocketfish 3.1A Model# RF-M657D with my Note. While using Google Nav, lowest brightness, keys backlight off, Sync off, HSPA+, the phone still loses charge (albeit, slowly). I'm assuming this is because the charger is not internally shorted between pins two and three as it is marketed as a iPad/iPhone charger. I'm using a Belkin Data/Charge cable so I know that is not shorted.
I have been doing some reading and last night, I purchased the "Satechi Smart Adapter Compatible with Samsung Galaxy S (I can't post links yet, google it.) so I will report back when I receive and pair it with the Rocketfish.
One thing I can't understand is how some of you have reported 1600mA from your car chargers. I am reading that without this adapter/cable mod, the Note will only run 460mA or so. With the adapter/cable mod, the Note's hardware maxes out at 960mA. Also, is their an app that allows me to see how much amperage the Note is receiving or are you guys pulling out the multimeter?
slapshot591 said:
Works like a champ. My battery was charging at 1600mAh while streaming soundcloud and using navigation. Definitely does the job.
Click to expand...
Click to collapse
Where/how do you get this info? Asking because I'm curious to see how my car charger does. It has usb ports rated at 2A, and I think it's 2A shared instead of per port, but want to see how it actually does when plugged in.
btswein said:
I'm using the Rocketfish 3.1A Model# RF-M657D with my Note. While using Google Nav, lowest brightness, keys backlight off, Sync off, HSPA+, the phone still loses charge (albeit, slowly). I'm assuming this is because the charger is not internally shorted between pins two and three as it is marketed as a iPad/iPhone charger. I'm using a Belkin Data/Charge cable so I know that is not shorted.
I have been doing some reading and last night, I purchased the "Satechi Smart Adapter Compatible with Samsung Galaxy S (I can't post links yet, google it.) so I will report back when I receive and pair it with the Rocketfish.
One thing I can't understand is how some of you have reported 1600mA from your car chargers. I am reading that without this adapter/cable mod, the Note will only run 460mA or so. With the adapter/cable mod, the Note's hardware maxes out at 960mA. Also, is their an app that allows me to see how much amperage the Note is receiving or are you guys pulling out the multimeter?
Click to expand...
Click to collapse
My rocket fish model must put out more than yours. My pic is above your post. With Google Nav, Google play music (streaming, not native music), full sync, brightness to at least 50% it only lost 4% over 30-40mins.
Sent from my SAMSUNG-SGH-I717 using XDA
erick161 said:
My rocket fish model must put out more than yours. My pic is above your post. With Google Nav, Google play music (streaming, not native music), full sync, brightness to at least 50% it only lost 4% over 30-40mins.
Sent from my SAMSUNG-SGH-I717 using XDA
Click to expand...
Click to collapse
From what I read, your charger is an .5 amp.
It's not like my phone dies or anything, but it'll lose like 5% an hour and I could be exaggerating. Are you using a charge-only cable or modded cable/charger at all? Like I said, I think this phone is only pulling down 460mA without said mod and I find 1600mA to be incorrect as I read the Note will only pull down 960mA max. We'll see what this adapter does for my charge times.
btswein said:
From what I read, your charger is an .5 amp.
It's not like my phone dies or anything, but it'll lose like 5% an hour and I could be exaggerating. Are you using a charge-only cable or modded cable/charger at all? Like I said, I think this phone is only pulling down 460mA without said mod and I find 1600mA to be incorrect as I read the Note will only pull down 960mA max. We'll see what this adapter does for my charge times.
Click to expand...
Click to collapse
They only thing I'm using is that exact setup posted. RF adapter and a Motorola atrix desktop dock charge cable.. (basically just a longer version of the standard wall charger)
Sent from my SAMSUNG-SGH-I717 using XDA
erick161 said:
They only thing I'm using is that exact setup posted. RF adapter and a Motorola atrix desktop dock charge cable.. (basically just a longer version of the standard wall charger)
Sent from my SAMSUNG-SGH-I717 using XDA
Click to expand...
Click to collapse
Ah, charge-only cable is the main factor here.
btswein said:
Ah, charge-only cable is the main factor here.
Click to expand...
Click to collapse
OK, I lied, I'm using the OEM cable that came with the Motorola Atrix 4G, not the longer cable from the desktop dock. I just checked my car and that's the cable that's in there.
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
I noticed a lot of people want a fast charger for the Note. This charger is for the Touchpad. I have this and it works really well. It charges faster than the OEM charger that came with the Note.
Not to mention, it is on sale right now for less than $5. Go grab one. From past experience, I used this at 15% battery life and charged for an hour and I was back over to 80%.:victory:
http://www.shopping.hp.com/en_US/ho.../FB341AA?HP-TouchPad-Power-Charger&aoid=35252
Is the usb cable that comes with it the same as the note takes?they don't show a pic of the other end and is it a charge only cable?If yes and yes I'm a gonna get one.Thanks
technut said:
Is the usb cable that comes with it the same as the note takes?they don't show a pic of the other end and is it a charge only cable?If yes and yes I'm a gonna get one.Thanks
Click to expand...
Click to collapse
Yes, it is a micro USB cable. One end is USB and other is micro USB. The cable length is longer than most phone cables. I haven't measured it, but from my plug to my desk, I still have excess cable compared to the original one from the phone.
Thank you, getting one!
This have been discussed hundreds time before....
That 1amp is the output of the charger which forwards the current to kernel of the device... NOTE can only intake 1 amp current... ( remove your battery and read the dam sticker :thumbup
Even though you will supply 2 3 4 5 amp... The maximum in would be 1 amp ONLY...
SECONDLY, micro usb cables have a restriction of carrying current... They cannot pass more than 1 amp current successfully... Therefore galaxy tab series does not come with micro usb slots....
Lastly my recommendation would be NOT to waste money on any other chargers...
Noted by the BEAST!!
dx.varun said:
This have been discussed hundreds time before....
That 1amp is the output of the charger which forwards the current to kernel of the device... NOTE can only intake 1 amp current... ( remove your battery and read the dam sticker :thumbup
Even though you will supply 2 3 4 5 amp... The maximum in would be 1 amp ONLY...
SECONDLY, micro usb cables have a restriction of carrying current... They cannot pass more than 1 amp current successfully... Therefore galaxy tab series does not come with micro usb slots....
Lastly my recommendation would be NOT to waste money on any other chargers...
Noted by the BEAST!!
Click to expand...
Click to collapse
It has been discussed, but it DOES charge faster than a conventional 1amp charger. If you don't have the charger and have nothing to compare with, then I don't think you can say it does not work.
Go check FCC about the charge. Also, the cables provided DOES carry a 2amp charge. Our note can handle fast charging but throttles down to a slower charging rate after 80%.
having a micro usb slot or not have a micro usb slot has nothing to do with the current it can handle.
Ipads and Iphones have the same connector but yet one has a 1amp charger and the other a 2amp charger.
deliriousbb said:
It has been discussed, but it DOES charge faster than a conventional 1amp charger. If you don't have the charger and have nothing to compare with, then I don't think you can say it does not work.
Go check FCC about the charge. Also, the cables provided DOES carry a 2amp charge. Our note can handle fast charging but throttles down to a slower charging rate after 80%.
having a micro usb slot or not have a micro usb slot has nothing to do with the current it can handle.
Ipads and Iphones have the same connector but yet one has a 1amp charger and the other a 2amp charger.
Click to expand...
Click to collapse
Firstly, I have tried to use with a 2amp charger that came with my SGT P1000.. NO DIFFERENCE...
SECONDLY, PULL OUT BATTERY AND READ!
Google for micro usb cable max output... You will get your answers...
Noted by the BEAST!!
dx.varun said:
This have been discussed hundreds time before....
That 1amp is the output of the charger which forwards the current to kernel of the device... NOTE can only intake 1 amp current... ( remove your battery and read the dam sticker :thumbup
Even though you will supply 2 3 4 5 amp... The maximum in would be 1 amp ONLY...
SECONDLY, micro usb cables have a restriction of carrying current... They cannot pass more than 1 amp current successfully... Therefore galaxy tab series does not come with micro usb slots....
Lastly my recommendation would be NOT to waste money on any other chargers...
Noted by the BEAST!!
Click to expand...
Click to collapse
deliriousbb said:
It has been discussed, but it DOES charge faster than a conventional 1amp charger. If you don't have the charger and have nothing to compare with, then I don't think you can say it does not work.
Go check FCC about the charge. Also, the cables provided DOES carry a 2amp charge. Our note can handle fast charging but throttles down to a slower charging rate after 80%.
having a micro usb slot or not have a micro usb slot has nothing to do with the current it can handle.
Ipads and Iphones have the same connector but yet one has a 1amp charger and the other a 2amp charger.
Click to expand...
Click to collapse
Well its $5, which is not worth this discussion, I'll gladly give this money even for the stock samsung charger.
i_max2k2 said:
Well its $5, which is not worth this discussion, I'll gladly give this money even for the stock samsung charger.
Click to expand...
Click to collapse
Agreed! A good charger for cheap.
dx.varun said:
Firstly, I have tried to use with a 2amp charger that came with my SGT P1000.. NO DIFFERENCE...
SECONDLY, PULL OUT BATTERY AND READ!
Google for micro usb cable max output... You will get your answers...
Noted by the BEAST!!
Click to expand...
Click to collapse
You don't have to get your panties in a twist. Rather than just read forums and assume the worst of everything try it for yourself. I've tried both and it is faster. Just trying to help my fellow Note users to get the best out of their phones.
btw, what are you screaming about pull out the battery and read? you tell me what you want us to know. RATED: 3.7V; 1500mA... WOW ok that proves your point...sigh:silly:
dx.varun said:
This have been discussed hundreds time before....
That 1amp is the output of the charger which forwards the current to kernel of the device... NOTE can only intake 1 amp current... ( remove your battery and read the dam sticker :thumbup
Even though you will supply 2 3 4 5 amp... The maximum in would be 1 amp ONLY...
SECONDLY, micro usb cables have a restriction of carrying current... They cannot pass more than 1 amp current successfully... Therefore galaxy tab series does not come with micro usb slots....
Lastly my recommendation would be NOT to waste money on any other chargers...
Noted by the BEAST!!
Click to expand...
Click to collapse
As an HP TouchPad owner, I can confirm that the cable provided with the charger are 'special'. My TP will not charge with any other MicroUSB cable connected to the official charger, the same cables which won't charge the TP will charge the Note. (I also own the HP touchstone dock, which the TP spends most of it's life sitting on.)
deliriousbb said:
It has been discussed, but it DOES charge faster than a conventional 1amp charger.
Click to expand...
Click to collapse
I have four different wall chargers, including two of this HP barrel adapter (one that came with the TouchPad, one that came with the Touchstone). With the supplied cable, it does charge the TouchPad very quickly. From webOS, the net charge rate is about 1.6 A with the screen on, so probably close to 2 A coming out the USB port.
However, when you plug a Note into this charger, the Note will still only draw 1 A. I have other AC chargers that are also able to supply 1 A to the Note, so in that respect this HP charger isn't anything special. However, it is only $5, which is a good deal.
---------- Post added at 11:39 PM ---------- Previous post was at 11:14 PM ----------
pTeronaut said:
My TP will not charge with any other MicroUSB cable connected to the official charger, the same cables which won't charge the TP will charge the Note.
Click to expand...
Click to collapse
I've found that the microUSB cable that comes with the Note, when paired with the HP TouchPad's AC charger, will supply 2 A. At least, that's what the OS reports: /sys/devices/platform/usb_gadget/current-mA shows "2000". Plugging the TouchPad into the Note's AC charger shows a value of "900". Plugging it into my laptop's USB port drops that value down to "500", as expected.
I bought two a week ago off Amazon for $10 each. $5 each with free shipping is a steal. I picked up three more. Thanks for posting this deal. I get 1A charging with either the stock charger or TP charger. I like to have a few extra chargers to sprinkle around at home or work (for my Note and the other devices I own that charge off USB.... including a TP).
deliriousbb said:
Yes, it is a micro USB cable. One end is USB and other is micro USB. The cable length is longer than most phone cables. I haven't measured it, but from my plug to my desk, I still have excess cable compared to the original one from the phone.
Click to expand...
Click to collapse
When you charge your phone using this HP microUSB cable, do you have issue with NO DEEP SLEEP when unplugging the Note from the charger?
There has been issues reported in XDA where, depending on the USB cables used to charge the Note (connected to computer OR power charger), if you unplug the Note, it will not go DEEP SLEEP, causing significant power drain.
This does NOT happen when the Note is charged using the cable that came with the Note.
Download Current Widget from the play store. Add widget to home screen and you will realize that your phone is not charging any more than 1 amp as designed.
Try the usb out from your pc and you will see about half an amp.
Sent from my SAMSUNG-SGH-I717 using xda premium
I have the galaxy tab brick charger the HP touch pad charger and my note charging brick....the touchpad charger works faster...but I feel like it doesn't get fully charged..seems to die faster?. I used the galaxy tab brick...slow to charge warms my phone up nicely...I'd stick with the original note charger.
Sent from my SAMSUNG-SGH-I717 using xda premium
lanwarrior said:
When you charge your phone using this HP microUSB cable, do you have issue with NO DEEP SLEEP when unplugging the Note from the charger?
There has been issues reported in XDA where, depending on the USB cables used to charge the Note (connected to computer OR power charger), if you unplug the Note, it will not go DEEP SLEEP, causing significant power drain.
This does NOT happen when the Note is charged using the cable that came with the Note.
Click to expand...
Click to collapse
I charge my Note overnight using my Touchpad's MicroUSB cable plugged into the Samsung charger, and I don't experience any difference in power drain.
Where is that post from the guy who put all these petty arguments to rest with scientific tests of all the various options and results??
Good lord people it's a charger for a phone .. no need to get so heated!
(unlike my stock charger.. which gets very heated!)
great price!!!
ordered 3 of them
the price is way cheaper than just a single micro usb cable shipped from other stores
i have 3 already
1 at work, 2 for home.
definitely faster than OEM. I charge overnight, no issues. had for around 5-6 months now. and i can use the phone while charging.
fact is that it DOES charge faster.
i recommend it
WOW***
Great price I bought 2!
When ever I drive, I have my phone hooked up to my Escort Red Line radar detector and my car's stereo via bluetooth (both). In order for me to use the radar detector effective, I need to have GPS and Blueooth enabled. This is a HUGE SUPER OMG battery drainer for my amaze. 20 minutes drive kills about 35% of the phone's power. My radar detector offers a slot to charge my phone BUT it still drains, not enough juice flowing in. Someone said it is because it's probably a .5amp.
So I am running a extension from the 12v lighter that's in the trunk to the front of my car. Amazon has a generic 2.1amp for 3 bucks.
http://www.amazon.com/Premium-Heavy...121&sr=8-1&keywords=htc+amaze+car+charger+amp
But on ebay, I found the original HTC car charger for 15 bucks which is a 1amp.
http://www.ebay.com/itm/HTC-Amaze-4...918506?pt=PDA_Accessories&hash=item27c867022a
What do you guys recommend? My logic says go for the 2.1amp, the phone will draw as much as it needs from it.
The 1amp.
Anything higher you'll damage the phone or the battery.
A wall plug power supply or a usb supply is 5.0v/1amp.
The 2.1 amp is probably 1 amp per port. Although it does not seem to specify.
F9zSlavik said:
What do you guys recommend? My logic says go for the 2.1amp, the phone will draw as much as it needs from it.
Click to expand...
Click to collapse
Right!:good:
---------- Post added at 09:23 AM ---------- Previous post was at 08:41 AM ----------
soundping said:
The 1amp.
Anything higher you'll damage the phone or the battery.
A wall plug power supply or a usb supply is 5.0v/1amp.
Click to expand...
Click to collapse
That means a higher capacity battery (more current NOT MORE VOLTAGE) will damage the phone?!!!!
Totally wrong!
A higher current will not damage the phone. A higher voltage will do it!
Please do not mix the current with voltage!
Voltage is same 5 Volts (±5%) for these “USB like” applications (1A or 2.1A power supply our case )They use USB socket/connector but usually only pin 1 and 4 (+ and-)
Regular computer USB port can supply max 0.5-0.9 A depending on version.
For battery charging devices the current can go to 5A.
Higher voltage will trip a warning window telling you to disconnect and use official HTC equipment.
The phone monitors input voltage to protect the equipment.
nyc_tdi said:
That means a higher capacity battery (more current NOT MORE VOLTAGE) will damage the phone?!!!!
Totally wrong!
A higher current will not damage the phone. A higher voltage will do it!
Please do not mix the current with voltage!
Voltage is same 5 Volts (±5%) for these “USB like” applications (1A or 2.1A power supply our case )They use USB socket/connector but usually only pin 1 and 4 (+ and-)
Regular computer USB port can supply max 0.5-0.9 A depending on version.
For battery charging devices the current can go to 5A.
Click to expand...
Click to collapse
and to add to that... unless you take the charger apart and short pins 2 and 3, it will only ever draw 500mA, as it assumes that it is hooked up to a regular powered USB port... I have bought multiple car charger usb adapters, and I have taken all of them apart and soldered the 2nd and 3rd pins together... otherwise charge time = forever, and sometimes it won't even charge if you have wifi or data/gps/bluetooth all going at once...
I recently got an Amaze and am generally happy with it. The biggest problem I have right now is finding the right car charger for it because the car charger I previously used (a 1A monoprice car charger) doesn't give it enough charge. I have been reading through the forums and some has been saying that if the charger is not working properly, it will recognize it as charging via USB rather than AC. In my case, the phone seems to be reading it as charging through AC, but there still doesn't seem to be enough current going through it. The phone will only charge if NOTHING is going on (i.e. screen's off, no GPS, etc.). I've been using CoPilot GPS and it draws the battery like crazy. Anyone has any idea as to which car charger would work properly with the Amaze such that I'll be able to charge (or at least maintain the charge) while using it as a GPS? Do I need to go up to a 2.1A charger?
I would look for a 4-5 star rated 2.1a car charger on Amazon.
Just read through the comments and feedback and you'll find one that's right for you.
I prefer the USB charger base itself and then using the OEM cable that came with the Amaze.
It seems to charge faster with that cable, at least to me anyway.
Remember though if it's rated 2.1a but has two USB slots that 2.1a will be cut in half if used to charge two different devices.
Hope this helps.
I couldve sworn we talked about this months ago. Let me see if I can find the thread.
nguyendqh said:
I would look for a 4-5 star rated 2.1a car charger on Amazon.
Just read through the comments and feedback and you'll find one that's right for you.
I prefer the USB charger base itself and then using the OEM cable that came with the Amaze.
It seems to charge faster with that cable, at least to me anyway.
Remember though if it's rated 2.1a but has two USB slots that 2.1a will be cut in half if used to charge two different devices.
Hope this helps.
Click to expand...
Click to collapse
you won't get the full 2.1a unless you usee a charge only cable or modify the charger as I stated above...
I ended up getting a 2.1A car charger and a USB charge only cable, and it's working perfectly. When I have the screen on full brightness and doing navigation with Co-Pilot GPS, my phone's no longer losing charge and is actually charging. The combo also works with my tablet as well.
blast0id said:
and to add to that... unless you take the charger apart and short pins 2 and 3, it will only ever draw 500mA, as it assumes that it is hooked up to a regular powered USB port... I have bought multiple car charger usb adapters, and I have taken all of them apart and soldered the 2nd and 3rd pins together... otherwise charge time = forever, and sometimes it won't even charge if you have wifi or data/gps/bluetooth all going at once...
Click to expand...
Click to collapse
This is damn helpful! So THAT is why when driving and using gps or whatnot I would always lose more battery even on charger.. So basically I can just solder the middle 2 pins together to trick it into thinking it is being powered like a home charger? No chance it will hurt anything I assume?
Silentbtdeadly said:
This is damn helpful! So THAT is why when driving and using gps or whatnot I would always lose more battery even on charger.. So basically I can just solder the middle 2 pins together to trick it into thinking it is being powered like a home charger? No chance it will hurt anything I assume?
Click to expand...
Click to collapse
I have done this to every single one of my USB car chargers... not a single issue...
Since I got my note 3 I've been charging it with my old AC chargers I bought on ebay which is a generic micro-usb charger (I got a couple of them laying around the appartment). I use my old chargers often because the samsung USB cable which was provided with the phone is always pluged into my desktop computer, and I didn't want to go trough the hassle of moving the cable all around the house to charge my phone.
Well anyway, so far I've notice charging times were pretty long(6-8hours), but I shrugged it off because I simply thought a bigger battery require longer to charge. But this weekend I slept off at my in-laws and I brought my samsung cable and AC adapter. I looked up with better battery stats and notice the charge time was around 3times as fast. (2hours or so for a 100% charge). Dammmn!
So why am I getting long charges with my ebay chargers?
Is it because they are cheap china product?
Is it because they don't have the USB3.0 port?
I'm thinking the USB3.0 has nothing to do with charging times if it's pluged with an AC adapter right? So my long charge time must be because of cheap products? Ok then, but if I want to buy additional chargers, or even a cradle for my bedside table. How can I know if they will have the best charge time? Am I forced to buy samsung branded stuff just to make sure?
Cause I'd be interested in something like this :
http://www.ebay.ca/itm/For-Samsung-Galaxy-Note-2-3-Cradle-Sync-Dock-Mode-2-1-amp-Otterbox-Fits-/251362752408?pt=US_Cell_Phone_PDA_Chargers&hash=item3a86633798&_uhb=1
but I'm not gonna buy it if it takes double/triple charging time..
Patbach said:
Since I got my note 3 I've been charging it with my old AC chargers I bought on ebay which is a generic micro-usb charger (I got a couple of them laying around the appartment).
Click to expand...
Click to collapse
The Note 3 should charge in just over two hours with either USB 2 or 3 cables. If you download https://play.google.com/store/apps/details?id=com.abmantis.galaxychargingcurrent.free&hl=en that will tell you the charging current. It should be 1200mA with the screen on and 1800mA with it off (trick is turn the screen off for 10s then back on and refresh and you should see 1800mA).
As long as the charger can deliver 1800mA and you are using a decent quality cable that should be all you need. Plugged into a USB port you'll only see 450mA on either USB 2 or 3.
Usually the ones that charge this quickly have an output of 2 amps. That is the output of the charger that came with the phone.
Sent from my Verizon Samsung Galaxy Note III.
Prevous Owner/Hacker of... numerous other devices!
CraigAmey said:
The Note 3 should charge in just over two hours with either USB 2 or 3 cables. If you download https://play.google.com/store/apps/details?id=com.abmantis.galaxychargingcurrent.free&hl=en that will tell you the charging current. It should be 1200mA with the screen on and 1800mA with it off (trick is turn the screen off for 10s then back on and refresh and you should see 1800mA).
As long as the charger can deliver 1800mA and you are using a decent quality cable that should be all you need. Plugged into a USB port you'll only see 450mA on either USB 2 or 3.
Click to expand...
Click to collapse
wow thanks there lots of useful stuff
I'm looking for a good QC 2.0 cable that is either equal or better than the stock cable. I'd like it to be at least 6 ft. Any suggestions?
xxSHADYxx said:
I'm looking for a good QC 2.0 cable that is either equal or better than the stock cable. I'd like it to be at least 6 ft. Any suggestions?
Click to expand...
Click to collapse
Portapow make one:
www dot portablepowersupplies dot co dot uk/portapow-20awg-fast-charge-sync-micro-usb-cable/
Not available on there yet, but they are on Amazon US: Search for PortaPow Specialised 3.3ft 20AWG Charge Only Micro USB Cable for Blackberry, or item code B00RL68RNS
(Sorry about the url formatting - I'm too new to be able to post them)
If the Cable does Charge ONLY, then it wont work for QC charging......QC charging requires the cable to have both power and data.....
I've been using mono price premium cables. Turbo charger charges noticeably faster then a standard charger. Never compared vs the stock cable
I have been using these by media bridge. Have had them for a while, before I had my nexus. Works great and nice quality, seems to charge as fast if not faster.
Mediabridge USB 2.0 - Micro-USB to USB Cable (6 Feet) - High-Speed A Male to Micro B with Gold-Plated Connectors - 2 Pack https://www.amazon.com/dp/B00KLI62BM/ref=cm_sw_r_awd_gQGdvb0BNNAYF
I'm using an extra cable from a GS4 wall charger. They are long. Don't know why nexus devices ship with such short cables.
Edit: official Samsung GS4 wall chargers are on amazon for like 9 dollars.
Search is your friend
http://forum.xda-developers.com/nexus-6/accessories/usb-cable-quick-charge-2-0-t3013942
Anker hands down is the best and it has a warranty and customer service to back it. Not all cables are created equal.
http://www.amazon.com/Anker%C2%AE-Extra-Premium-Android-Samsung/dp/B00MLP3JMS/ref=sr_1_3?ie=UTF8&qid=1427076204&sr=8-3&keywords=anker+micro+usb
I picked up one of the anker ones and i am impressed with its build quality! I cant really tell if it charges at the same rate as the stock cable, but it doesnt feel terribly slow or extremely fast. Im very happy with it though!
I second Anker. I have two 5ft and work just fine with quick charger.
interesting...I always thought that the QC ability came from the wall connector..not the actual cable. I used regular plain jane cables with my QC wall adapter, and they worked just as well as the one that came with the phone...hrmm
Tower1972 said:
interesting...I always thought that the QC ability came from the wall connector..not the actual cable. I used regular plain jane cables with my QC wall adapter, and they worked just as well as the one that came with the phone...hrmm
Click to expand...
Click to collapse
It's built into the phone and the charger. The cable has little to do with it. Other than that all of the pins must be connected, no charge-only cables. The device and charger have to agree on the voltage, and they talk over the data pins to do that. That way, the QC chargers don't destroy devices that can't handle the extra voltage. The thicker power wires have a lower voltage drop, which is nice, and very important for non-QC devices. For QC it's less important, but if they are available, get them. I happened to already have the ones I'm using, so I tried them. They work great.
I'm using a 5' cable from amazon (bought a while ago) and a 5' extension cable from an old USB WiFi adapter I think. Quick charge still shows up and charges real fast.